*/ DEVICE_CMD Close_Clipboard(REBREQ *req)
/*
***********************************************************************/
{
SET_CLOSED(req);
return DR_DONE;
}
*/ static void Cleanup_File(REBREQ *file)
/*
***********************************************************************/
{
if (GET_FLAG(file->modes, RFM_NAME_MEM)) {
//NOTE: file->special.file.path will get GC'd
file->special.file.path = 0;
CLR_FLAG(file->modes, RFM_NAME_MEM);
}
SET_CLOSED(file);
}
*/ void Set_Port_Open(REBSER *port, REBFLG flag)
/*
** Standard method for setting a port open/closed.
** A convention. Not all ports use this method.
**
***********************************************************************/
{
REBVAL *state = BLK_SKIP(port, STD_PORT_STATE);
if (IS_BINARY(state)) {
if (flag) SET_OPEN(VAL_BIN_DATA(state));
else SET_CLOSED(VAL_BIN_DATA(state));
}
}
//
// Close_Signal: C
//
DEVICE_CMD Close_Signal(REBREQ *req)
{
//RL_Print("Close_Signal\n");
if (sigprocmask(SIG_UNBLOCK, &req->special.signal.mask, NULL) < 0) {
goto error;
}
SET_CLOSED(req);
return DR_DONE;
error:
req->error = errno;
return DR_ERROR;
}
*/ DEVICE_CMD Close_DNS(REBREQ *sock)
/*
** Note: valid even if not open.
**
***********************************************************************/
{
// Terminate a pending request:
#ifdef HAS_ASYNC_DNS
if (GET_FLAG(sock->flags, RRF_PENDING)) {
CLR_FLAG(sock->flags, RRF_PENDING);
if (sock->handle) WSACancelAsyncRequest(sock->handle);
}
#endif
if (sock->net.host_info) OS_Free(sock->net.host_info);
sock->net.host_info = 0;
sock->handle = 0;
SET_CLOSED(sock);
return DR_DONE; // Removes it from device's pending list (if needed)
}
//
// Transport_Actor: C
//
static REB_R Transport_Actor(struct Reb_Call *call_, REBSER *port, REBCNT action, enum Transport_Types proto)
{
REBREQ *sock; // IO request
REBVAL *spec; // port spec
REBVAL *arg; // action argument value
REBVAL *val; // e.g. port number value
REBINT result; // IO result
REBCNT refs; // refinement argument flags
REBCNT len; // generic length
REBSER *ser; // simplifier
Validate_Port(port, action);
*D_OUT = *D_ARG(1);
arg = DS_ARGC > 1 ? D_ARG(2) : NULL;
sock = cast(REBREQ*, Use_Port_State(port, RDI_NET, sizeof(*sock)));
if (proto == TRANSPORT_UDP) {
SET_FLAG(sock->modes, RST_UDP);
}
//Debug_Fmt("Sock: %x", sock);
spec = OFV(port, STD_PORT_SPEC);
if (!IS_OBJECT(spec)) fail (Error(RE_INVALID_PORT));
// sock->timeout = 4000; // where does this go? !!!
// HOW TO PREVENT OVERWRITE DURING BUSY OPERATION!!!
// Should it just ignore it or cause an error?
// Actions for an unopened socket:
if (!IS_OPEN(sock)) {
switch (action) { // Ordered by frequency
case A_OPEN:
arg = Obj_Value(spec, STD_PORT_SPEC_NET_HOST);
val = Obj_Value(spec, STD_PORT_SPEC_NET_PORT_ID);
if (OS_DO_DEVICE(sock, RDC_OPEN))
fail (Error_On_Port(RE_CANNOT_OPEN, port, -12));
SET_OPEN(sock);
// Lookup host name (an extra TCP device step):
if (IS_STRING(arg)) {
sock->common.data = VAL_BIN(arg);
sock->special.net.remote_port = IS_INTEGER(val) ? VAL_INT32(val) : 80;
result = OS_DO_DEVICE(sock, RDC_LOOKUP); // sets remote_ip field
if (result < 0)
fail (Error_On_Port(RE_NO_CONNECT, port, sock->error));
return R_OUT;
}
// Host IP specified:
else if (IS_TUPLE(arg)) {
sock->special.net.remote_port = IS_INTEGER(val) ? VAL_INT32(val) : 80;
memcpy(&sock->special.net.remote_ip, VAL_TUPLE(arg), 4);
break;
}
// No host, must be a LISTEN socket:
else if (IS_NONE(arg)) {
SET_FLAG(sock->modes, RST_LISTEN);
sock->common.data = 0; // where ACCEPT requests are queued
sock->special.net.local_port = IS_INTEGER(val) ? VAL_INT32(val) : 8000;
break;
}
else
fail (Error_On_Port(RE_INVALID_SPEC, port, -10));
case A_CLOSE:
return R_OUT;
case A_OPENQ:
return R_FALSE;
case A_UPDATE: // allowed after a close
break;
default:
fail (Error_On_Port(RE_NOT_OPEN, port, -12));
}
}
// Actions for an open socket:
switch (action) { // Ordered by frequency
case A_UPDATE:
// Update the port object after a READ or WRITE operation.
// This is normally called by the WAKE-UP function.
arg = OFV(port, STD_PORT_DATA);
if (sock->command == RDC_READ) {
if (ANY_BINSTR(arg)) VAL_TAIL(arg) += sock->actual;
}
else if (sock->command == RDC_WRITE) {
SET_NONE(arg); // Write is done.
}
return R_NONE;
case A_READ:
// Read data into a buffer, expanding the buffer if needed.
// If no length is given, program must stop it at some point.
refs = Find_Refines(call_, ALL_READ_REFS);
if (
!GET_FLAG(sock->modes, RST_UDP)
&& !GET_FLAG(sock->state, RSM_CONNECT)
) {
fail (Error_On_Port(RE_NOT_CONNECTED, port, -15));
}
// Setup the read buffer (allocate a buffer if needed):
arg = OFV(port, STD_PORT_DATA);
if (!IS_STRING(arg) && !IS_BINARY(arg)) {
Val_Init_Binary(arg, Make_Binary(NET_BUF_SIZE));
}
ser = VAL_SERIES(arg);
sock->length = SERIES_AVAIL(ser); // space available
if (sock->length < NET_BUF_SIZE/2) Extend_Series(ser, NET_BUF_SIZE);
sock->length = SERIES_AVAIL(ser);
sock->common.data = STR_TAIL(ser); // write at tail
//if (SERIES_TAIL(ser) == 0)
sock->actual = 0; // Actual for THIS read, not for total.
//Print("(max read length %d)", sock->length);
result = OS_DO_DEVICE(sock, RDC_READ); // recv can happen immediately
if (result < 0) fail (Error_On_Port(RE_READ_ERROR, port, sock->error));
break;
case A_WRITE:
// Write the entire argument string to the network.
// The lower level write code continues until done.
refs = Find_Refines(call_, ALL_WRITE_REFS);
if (!GET_FLAG(sock->modes, RST_UDP)
&& !GET_FLAG(sock->state, RSM_CONNECT))
fail (Error_On_Port(RE_NOT_CONNECTED, port, -15));
// Determine length. Clip /PART to size of string if needed.
spec = D_ARG(2);
len = VAL_LEN(spec);
if (refs & AM_WRITE_PART) {
REBCNT n = Int32s(D_ARG(ARG_WRITE_LIMIT), 0);
if (n <= len) len = n;
}
// Setup the write:
*OFV(port, STD_PORT_DATA) = *spec; // keep it GC safe
sock->length = len;
sock->common.data = VAL_BIN_DATA(spec);
sock->actual = 0;
//Print("(write length %d)", len);
result = OS_DO_DEVICE(sock, RDC_WRITE); // send can happen immediately
if (result < 0) fail (Error_On_Port(RE_WRITE_ERROR, port, sock->error));
if (result == DR_DONE) SET_NONE(OFV(port, STD_PORT_DATA));
break;
case A_PICK:
// FIRST server-port returns new port connection.
len = Get_Num_Arg(arg); // Position
if (len == 1 && GET_FLAG(sock->modes, RST_LISTEN) && sock->common.data)
Accept_New_Port(D_OUT, port, sock); // sets D_OUT
else
fail (Error_Out_Of_Range(arg));
break;
case A_QUERY:
// Get specific information - the scheme's info object.
// Special notation allows just getting part of the info.
Ret_Query_Net(port, sock, D_OUT);
break;
case A_OPENQ:
// Connect for clients, bind for servers:
if (sock->state & ((1<<RSM_CONNECT) | (1<<RSM_BIND))) return R_TRUE;
return R_FALSE;
case A_CLOSE:
if (IS_OPEN(sock)) {
OS_DO_DEVICE(sock, RDC_CLOSE);
SET_CLOSED(sock);
}
break;
case A_LENGTH:
arg = OFV(port, STD_PORT_DATA);
len = ANY_SERIES(arg) ? VAL_TAIL(arg) : 0;
SET_INTEGER(D_OUT, len);
break;
case A_OPEN:
result = OS_DO_DEVICE(sock, RDC_CONNECT);
if (result < 0)
fail (Error_On_Port(RE_NO_CONNECT, port, sock->error));
break;
case A_DELETE: // Temporary to TEST error handler!
{
REBVAL *event = Append_Event(); // sets signal
VAL_SET(event, REB_EVENT); // (has more space, if we need it)
VAL_EVENT_TYPE(event) = EVT_ERROR;
VAL_EVENT_DATA(event) = 101;
VAL_EVENT_REQ(event) = sock;
}
break;
default:
fail (Error_Illegal_Action(REB_PORT, action));
}
return R_OUT;
}
*/ static REB_R Console_Actor(struct Reb_Call *call_, REBSER *port, REBCNT action)
/*
***********************************************************************/
{
REBREQ *req;
REBINT result;
REBVAL *arg = D_ARG(2);
REBSER *ser;
Validate_Port(port, action);
arg = D_ARG(2);
*D_OUT = *D_ARG(1);
req = cast(REBREQ*, Use_Port_State(port, RDI_STDIO, sizeof(REBREQ)));
switch (action) {
case A_READ:
// If not open, open it:
if (!IS_OPEN(req)) {
if (OS_DO_DEVICE(req, RDC_OPEN)) Trap_Port_DEAD_END(RE_CANNOT_OPEN, port, req->error);
}
// If no buffer, create a buffer:
arg = OFV(port, STD_PORT_DATA);
if (!IS_STRING(arg) && !IS_BINARY(arg)) {
Set_Binary(arg, MAKE_OS_BUFFER(OUT_BUF_SIZE));
}
ser = VAL_SERIES(arg);
RESET_SERIES(ser);
req->common.data = BIN_HEAD(ser);
req->length = SERIES_AVAIL(ser);
#ifdef nono
// Is the buffer large enough?
req->length = SERIES_AVAIL(ser); // space available
if (req->length < OUT_BUF_SIZE/2) Extend_Series(ser, OUT_BUF_SIZE);
req->length = SERIES_AVAIL(ser);
// Don't make buffer too large: Bug #174 ?????
if (req->length > 1024) req->length = 1024; //???
req->common.data = STR_TAIL(ser); // write at tail //???
if (SERIES_TAIL(ser) == 0) req->actual = 0; //???
#endif
result = OS_DO_DEVICE(req, RDC_READ);
if (result < 0) Trap_Port_DEAD_END(RE_READ_ERROR, port, req->error);
#ifdef nono
// Does not belong here!!
// Remove or replace CRs:
result = 0;
for (n = 0; n < req->actual; n++) {
chr = GET_ANY_CHAR(ser, n);
if (chr == CR) {
chr = LF;
// Skip LF if it follows:
if ((n+1) < req->actual &&
LF == GET_ANY_CHAR(ser, n+1)) n++;
}
SET_ANY_CHAR(ser, result, chr);
result++;
}
#endif
// !!! Among many confusions in this file, it said "Another copy???"
//Set_String(D_OUT, Copy_OS_Str(ser->data, result));
Set_Binary(D_OUT, Copy_Bytes(req->common.data, req->actual));
break;
case A_OPEN:
// ?? why???
//if (OS_DO_DEVICE(req, RDC_OPEN)) Trap_Port_DEAD_END(RE_CANNOT_OPEN, port);
SET_OPEN(req);
break;
case A_CLOSE:
SET_CLOSED(req);
//OS_DO_DEVICE(req, RDC_CLOSE);
break;
case A_OPENQ:
if (IS_OPEN(req)) return R_TRUE;
return R_FALSE;
default:
Trap_Action_DEAD_END(REB_PORT, action);
}
return R_OUT;
}
*/ static REB_R Event_Actor(struct Reb_Call *call_, REBSER *port, REBCNT action)
/*
** Internal port handler for events.
**
***********************************************************************/
{
REBVAL *spec;
REBVAL *state;
REB_R result;
REBVAL *arg;
REBVAL save_port;
Validate_Port(port, action);
arg = D_ARG(2);
*D_OUT = *D_ARG(1);
// Validate and fetch relevant PORT fields:
state = BLK_SKIP(port, STD_PORT_STATE);
spec = BLK_SKIP(port, STD_PORT_SPEC);
if (!IS_OBJECT(spec)) Trap1_DEAD_END(RE_INVALID_SPEC, spec);
// Get or setup internal state data:
if (!IS_BLOCK(state)) Set_Block(state, Make_Block(EVENTS_CHUNK - 1));
switch (action) {
case A_UPDATE:
return R_NONE;
// Normal block actions done on events:
case A_POKE:
if (!IS_EVENT(D_ARG(3))) Trap_Arg_DEAD_END(D_ARG(3));
goto act_blk;
case A_INSERT:
case A_APPEND:
//case A_PATH: // not allowed: port/foo is port object field access
//case A_PATH_SET: // not allowed: above
if (!IS_EVENT(arg)) Trap_Arg_DEAD_END(arg);
case A_PICK:
act_blk:
save_port = *D_ARG(1); // save for return
*D_ARG(1) = *state;
result = T_Block(call_, action);
SET_SIGNAL(SIG_EVENT_PORT);
if (action == A_INSERT || action == A_APPEND || action == A_REMOVE) {
*D_OUT = save_port;
break;
}
return result; // return condition
case A_CLEAR:
VAL_TAIL(state) = 0;
VAL_BLK_TERM(state);
CLR_SIGNAL(SIG_EVENT_PORT);
break;
case A_LENGTHQ:
SET_INTEGER(D_OUT, VAL_TAIL(state));
break;
case A_OPEN:
if (!req) { //!!!
req = OS_MAKE_DEVREQ(RDI_EVENT);
if (req) {
SET_OPEN(req);
OS_DO_DEVICE(req, RDC_CONNECT); // stays queued
}
}
break;
case A_CLOSE:
OS_ABORT_DEVICE(req);
OS_DO_DEVICE(req, RDC_CLOSE);
// free req!!!
SET_CLOSED(req);
req = 0;
break;
case A_FIND: // add it
default:
Trap_Action_DEAD_END(REB_PORT, action);
}
return R_OUT;
}
//
// Serial_Actor: C
//
static REB_R Serial_Actor(REBFRM *frame_, REBCTX *port, REBSYM action)
{
REBREQ *req; // IO request
REBVAL *spec; // port spec
REBVAL *arg; // action argument value
REBVAL *val; // e.g. port number value
REBINT result; // IO result
REBCNT refs; // refinement argument flags
REBCNT len; // generic length
REBSER *ser; // simplifier
REBVAL *path;
Validate_Port(port, action);
*D_OUT = *D_ARG(1);
// Validate PORT fields:
spec = CTX_VAR(port, STD_PORT_SPEC);
if (!IS_OBJECT(spec)) fail (Error(RE_INVALID_PORT));
path = Obj_Value(spec, STD_PORT_SPEC_HEAD_REF);
if (!path) fail (Error(RE_INVALID_SPEC, spec));
//if (!IS_FILE(path)) fail (Error(RE_INVALID_SPEC, path));
req = cast(REBREQ*, Use_Port_State(port, RDI_SERIAL, sizeof(*req)));
// Actions for an unopened serial port:
if (!IS_OPEN(req)) {
switch (action) {
case SYM_OPEN:
arg = Obj_Value(spec, STD_PORT_SPEC_SERIAL_PATH);
if (! (IS_FILE(arg) || IS_STRING(arg) || IS_BINARY(arg)))
fail (Error(RE_INVALID_PORT_ARG, arg));
req->special.serial.path = ALLOC_N(REBCHR, MAX_SERIAL_DEV_PATH);
OS_STRNCPY(
req->special.serial.path,
//
// !!! This is assuming VAL_DATA contains native chars.
// Should it? (2 bytes on windows, 1 byte on linux/mac)
//
SER_AT(REBCHR, VAL_SERIES(arg), VAL_INDEX(arg)),
MAX_SERIAL_DEV_PATH
);
arg = Obj_Value(spec, STD_PORT_SPEC_SERIAL_SPEED);
if (! IS_INTEGER(arg))
fail (Error(RE_INVALID_PORT_ARG, arg));
req->special.serial.baud = VAL_INT32(arg);
//Secure_Port(SYM_SERIAL, ???, path, ser);
arg = Obj_Value(spec, STD_PORT_SPEC_SERIAL_DATA_SIZE);
if (!IS_INTEGER(arg)
|| VAL_INT64(arg) < 5
|| VAL_INT64(arg) > 8
) {
fail (Error(RE_INVALID_PORT_ARG, arg));
}
req->special.serial.data_bits = VAL_INT32(arg);
arg = Obj_Value(spec, STD_PORT_SPEC_SERIAL_STOP_BITS);
if (!IS_INTEGER(arg)
|| VAL_INT64(arg) < 1
|| VAL_INT64(arg) > 2
) {
fail (Error(RE_INVALID_PORT_ARG, arg));
}
req->special.serial.stop_bits = VAL_INT32(arg);
arg = Obj_Value(spec, STD_PORT_SPEC_SERIAL_PARITY);
if (IS_BLANK(arg)) {
req->special.serial.parity = SERIAL_PARITY_NONE;
} else {
if (!IS_WORD(arg))
fail (Error(RE_INVALID_PORT_ARG, arg));
switch (VAL_WORD_SYM(arg)) {
case SYM_ODD:
req->special.serial.parity = SERIAL_PARITY_ODD;
break;
case SYM_EVEN:
req->special.serial.parity = SERIAL_PARITY_EVEN;
break;
default:
fail (Error(RE_INVALID_PORT_ARG, arg));
}
}
arg = Obj_Value(spec, STD_PORT_SPEC_SERIAL_FLOW_CONTROL);
if (IS_BLANK(arg)) {
req->special.serial.flow_control = SERIAL_FLOW_CONTROL_NONE;
} else {
if (!IS_WORD(arg))
fail (Error(RE_INVALID_PORT_ARG, arg));
switch (VAL_WORD_SYM(arg)) {
case SYM_HARDWARE:
req->special.serial.flow_control = SERIAL_FLOW_CONTROL_HARDWARE;
break;
case SYM_SOFTWARE:
req->special.serial.flow_control = SERIAL_FLOW_CONTROL_SOFTWARE;
break;
default:
fail (Error(RE_INVALID_PORT_ARG, arg));
}
}
if (OS_DO_DEVICE(req, RDC_OPEN))
fail (Error_On_Port(RE_CANNOT_OPEN, port, -12));
SET_OPEN(req);
return R_OUT;
case SYM_CLOSE:
return R_OUT;
case SYM_OPEN_Q:
return R_FALSE;
default:
fail (Error_On_Port(RE_NOT_OPEN, port, -12));
}
}
// Actions for an open socket:
switch (action) {
case SYM_READ:
refs = Find_Refines(frame_, ALL_READ_REFS);
// Setup the read buffer (allocate a buffer if needed):
arg = CTX_VAR(port, STD_PORT_DATA);
if (!IS_STRING(arg) && !IS_BINARY(arg)) {
Val_Init_Binary(arg, Make_Binary(32000));
}
ser = VAL_SERIES(arg);
req->length = SER_AVAIL(ser); // space available
if (req->length < 32000/2) Extend_Series(ser, 32000);
req->length = SER_AVAIL(ser);
// This used STR_TAIL (obsolete, equivalent to BIN_TAIL) but was it
// sure the series was byte sized? Added in a check.
assert(BYTE_SIZE(ser));
req->common.data = BIN_TAIL(ser); // write at tail
//if (SER_LEN(ser) == 0)
req->actual = 0; // Actual for THIS read, not for total.
#ifdef DEBUG_SERIAL
printf("(max read length %d)", req->length);
#endif
result = OS_DO_DEVICE(req, RDC_READ); // recv can happen immediately
if (result < 0) fail (Error_On_Port(RE_READ_ERROR, port, req->error));
#ifdef DEBUG_SERIAL
for (len = 0; len < req->actual; len++) {
if (len % 16 == 0) printf("\n");
printf("%02x ", req->common.data[len]);
}
printf("\n");
#endif
*D_OUT = *arg;
return R_OUT;
case SYM_WRITE:
refs = Find_Refines(frame_, ALL_WRITE_REFS);
// Determine length. Clip /PART to size of string if needed.
spec = D_ARG(2);
len = VAL_LEN_AT(spec);
if (refs & AM_WRITE_PART) {
REBCNT n = Int32s(D_ARG(ARG_WRITE_LIMIT), 0);
if (n <= len) len = n;
}
// Setup the write:
*CTX_VAR(port, STD_PORT_DATA) = *spec; // keep it GC safe
req->length = len;
req->common.data = VAL_BIN_AT(spec);
req->actual = 0;
//Print("(write length %d)", len);
result = OS_DO_DEVICE(req, RDC_WRITE); // send can happen immediately
if (result < 0) fail (Error_On_Port(RE_WRITE_ERROR, port, req->error));
break;
case SYM_UPDATE:
// Update the port object after a READ or WRITE operation.
// This is normally called by the WAKE-UP function.
arg = CTX_VAR(port, STD_PORT_DATA);
if (req->command == RDC_READ) {
if (ANY_BINSTR(arg)) {
SET_SERIES_LEN(
VAL_SERIES(arg),
VAL_LEN_HEAD(arg) + req->actual
);
}
}
else if (req->command == RDC_WRITE) {
SET_BLANK(arg); // Write is done.
}
return R_BLANK;
case SYM_OPEN_Q:
return R_TRUE;
case SYM_CLOSE:
if (IS_OPEN(req)) {
OS_DO_DEVICE(req, RDC_CLOSE);
SET_CLOSED(req);
}
break;
default:
fail (Error_Illegal_Action(REB_PORT, action));
}
return R_OUT;
}
