void monitoring_pga(void) {
int i = 3;
char isResetPga = 0;
if(driver_stat.mut)
return;
driver_stat.mut = 1;
GPIO_WriteBit(GPIOD, GPIO_Pin_15, Bit_RESET);
for(; i >= 0; i--) {
while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_TXE) == RESET);
SPI_I2S_SendData16(SPI2, driver_stat.gain[i]);
while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY) == SET);
if((driver_stat.rec_message[i] = SPI_I2S_ReceiveData16(SPI2)) != driver_stat.gain[i]) {
isResetPga = 1;
}
}
while(SPI_GetTransmissionFIFOStatus(SPI2) != SPI_TransmissionFIFOStatus_Empty);
while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY) == SET);
GPIO_WriteBit(GPIOD, GPIO_Pin_15, Bit_SET);
if(isResetPga) {
GPIO_WriteBit(GPIOE, GPIO_Pin_12, Bit_SET);
driver_stat.is_overload = 1;
}
driver_stat.mut = 0;
return;
}
/**
* Return true if the bus is currently in the middle of a transmission.
*/
bool spiIsBusBusy(SPI_TypeDef *instance)
{
#ifdef STM32F303xC
return SPI_GetTransmissionFIFOStatus(instance) != SPI_TransmissionFIFOStatus_Empty || SPI_I2S_GetFlagStatus(instance, SPI_I2S_FLAG_BSY) == SET;
#else
return SPI_I2S_GetFlagStatus(instance, SPI_I2S_FLAG_TXE) == RESET || SPI_I2S_GetFlagStatus(instance, SPI_I2S_FLAG_BSY) == SET;
#endif
}
void lcd_write_raw(const uint8_t *data, int length)
{
int i;
for(i = 0; i < length; i++)
{
while(SPI_GetTransmissionFIFOStatus(LCD_SPI) >= SPI_TransmissionFIFOStatus_HalfFull);
SPI_I2S_SendData16(LCD_SPI, data[i] | 0x100);
}
}
void pga2505_write(void) {
int i =3;
GPIO_WriteBit(GPIOD, GPIO_Pin_15, Bit_RESET);
for(; i >= 0; i--) {
while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_TXE) == RESET);
SPI_I2S_SendData16(SPI2, driver_stat.gain[i]);
while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY) == SET);
SPI_I2S_ReceiveData16(SPI2);
}
while(SPI_GetTransmissionFIFOStatus(SPI2) != SPI_TransmissionFIFOStatus_Empty);
while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY) == SET);
GPIO_WriteBit(GPIOD, GPIO_Pin_15, Bit_SET);
return;
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f0xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f0xx.c file
*/
/* SPI configuration ------------------------------------------------------*/
SPI_Config();
/* SysTick configuration ---------------------------------------------------*/
SysTickConfig();
/* Initialize LEDs mounted on STM320518-EVAL board */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);
/* Master board configuration ------------------------------------------------*/
#ifdef SPI_MASTER
/* Initialize push-buttons mounted on STM320518-EVAL board */
STM_EVAL_PBInit(BUTTON_RIGHT, BUTTON_MODE_GPIO);
STM_EVAL_PBInit(BUTTON_LEFT, BUTTON_MODE_GPIO);
STM_EVAL_PBInit(BUTTON_UP, BUTTON_MODE_GPIO);
STM_EVAL_PBInit(BUTTON_DOWN, BUTTON_MODE_GPIO);
STM_EVAL_PBInit(BUTTON_SEL, BUTTON_MODE_GPIO);
/* Initializes the SPI communication */
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
SPI_Init(SPIx, &SPI_InitStructure);
/* Initialize the FIFO threshold */
SPI_RxFIFOThresholdConfig(SPIx, SPI_RxFIFOThreshold_QF);
/* Enable the Rx buffer not empty interrupt */
SPI_I2S_ITConfig(SPIx, SPI_I2S_IT_RXNE, ENABLE);
/* Enable the SPI Error interrupt */
SPI_I2S_ITConfig(SPIx, SPI_I2S_IT_ERR, ENABLE);
/* Data transfer is performed in the SPI interrupt routine */
/* Enable the SPI peripheral */
SPI_Cmd(SPIx, ENABLE);
while (1)
{
CmdTransmitted = 0x00;
CmdReceived = 0x00;
CmdStatus = 0x00;
Tx_Idx = 0x00;
Rx_Idx = 0x00;
/* Clear the RxBuffer */
Fill_Buffer(RxBuffer, TXBUFFERSIZE);
PressedButton = Read_Joystick();
while (PressedButton == JOY_NONE)
{
PressedButton = Read_Joystick();
}
switch (PressedButton)
{
/* JOY_RIGHT button pressed */
case JOY_RIGHT:
CmdTransmitted = CMD_RIGHT;
break;
/* JOY_LEFT button pressed */
case JOY_LEFT:
CmdTransmitted = CMD_LEFT;
break;
/* JOY_UP button pressed */
case JOY_UP:
CmdTransmitted = CMD_UP;
break;
/* JOY_DOWN button pressed */
case JOY_DOWN:
CmdTransmitted = CMD_DOWN;
break;
/* JOY_SEL button pressed */
case JOY_SEL:
CmdTransmitted = CMD_SEL;
break;
default:
break;
}
if (CmdTransmitted != 0x00)
{
/* Enable the Tx buffer empty interrupt */
SPI_I2S_ITConfig(SPIx, SPI_I2S_IT_TXE, ENABLE);
/* Wait until end of data transfer or time out*/
TimeOut = USER_TIMEOUT;
while ((Rx_Idx < DATA_SIZE)&&(TimeOut != 0x00))
{}
if(TimeOut == 0)
{
TimeOut_UserCallback();
}
}
/* Waiting until TX FIFO is empty */
while (SPI_GetTransmissionFIFOStatus(SPIx) != SPI_TransmissionFIFOStatus_Empty)
{}
/* Wait busy flag */
while(SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_BSY) == SET)
{}
/* Waiting until RX FIFO is empty */
while (SPI_GetReceptionFIFOStatus(SPIx) != SPI_ReceptionFIFOStatus_Empty)
{}
switch (CmdTransmitted)
{
/* Right button pressed */
case CMD_RIGHT:
if ((Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) == PASSED) && (CmdReceived == CMD_ACK))
{
/* Turn ON LED2 and LED3 */
STM_EVAL_LEDOn(LED2);
STM_EVAL_LEDOn(LED3);
/* Turn all other LEDs off */
STM_EVAL_LEDOff(LED4);
}
break;
/* Left button pressed*/
case CMD_LEFT:
if ((Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) == PASSED) && (CmdReceived == CMD_ACK))
{
/* Turn ON LED4 */
STM_EVAL_LEDOn(LED4);
/* Turn all other LEDs off */
STM_EVAL_LEDOff(LED2);
STM_EVAL_LEDOff(LED3);
}
break;
/* Up button pressed */
case CMD_UP:
if ((Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) == PASSED) && (CmdReceived == CMD_ACK))
{
/* Turn ON LED2 */
STM_EVAL_LEDOn(LED2);
/* Turn all other LEDs off */
STM_EVAL_LEDOff(LED3);
STM_EVAL_LEDOff(LED4);
}
break;
/* Down button pressed */
case CMD_DOWN:
if ((Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) == PASSED) && (CmdReceived == CMD_ACK))
{
/* Turn ON LED3 */
STM_EVAL_LEDOn(LED3);
/* Turn all other LEDs off */
STM_EVAL_LEDOff(LED2);
STM_EVAL_LEDOff(LED4);
}
break;
/* Sel button pressed */
case CMD_SEL:
if ((Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) == PASSED) && (CmdReceived == CMD_ACK))
{
/* Turn ON all LEDs */
STM_EVAL_LEDOn(LED2);
STM_EVAL_LEDOn(LED3);
STM_EVAL_LEDOn(LED4);
}
break;
default:
break;
}
}
#endif /* SPI_MASTER */
/* Slave board configuration ----------------------------------------------*/
#ifdef SPI_SLAVE
/* Initializes the SPI communication */
SPI_I2S_DeInit(SPIx);
SPI_InitStructure.SPI_Mode = SPI_Mode_Slave;
SPI_Init(SPIx, &SPI_InitStructure);
/* Initialize the FIFO threshold */
SPI_RxFIFOThresholdConfig(SPIx, SPI_RxFIFOThreshold_QF);
/* Enable the Rx buffer not empty interrupt */
SPI_I2S_ITConfig(SPIx, SPI_I2S_IT_RXNE, ENABLE);
/* Enable the SPI Error interrupt */
SPI_I2S_ITConfig(SPIx, SPI_I2S_IT_ERR, ENABLE);
/* Enable the SPI peripheral */
SPI_Cmd(SPIx, ENABLE);
/* Infinite Loop */
while (1)
{
CmdStatus = 0x00;
CmdReceived = 0x00;
Rx_Idx = 0x00;
Tx_Idx = 0x00;
/* Write the first data in SPI shift register before enabling the interrupt
this data will be transmitted when the Slave receive the generated clock
by the Master */
/* Enable the Tx buffer empty interrupt */
SPI_SendData8(SPIx, CMD_ACK);
SPI_I2S_ITConfig(SPIx, SPI_I2S_IT_TXE, ENABLE);
/* Waiting Transaction code Byte */
while (CmdStatus == 0x00)
{}
TimeOut = USER_TIMEOUT;
while ((Rx_Idx < DATA_SIZE)&&(TimeOut != 0x00))
{}
if(TimeOut == 0)
{
TimeOut_UserCallback();
}
switch (CmdReceived)
{
/* CMD_RIGHT command received or time out*/
case CMD_RIGHT:
if (Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) != FAILED)
{
/* Turn ON LED2 and LED3 */
STM_EVAL_LEDOn(LED2);
STM_EVAL_LEDOn(LED3);
/* Turn OFF LED4 */
STM_EVAL_LEDOff(LED4);
}
break;
/* CMD_LEFT command received or time out */
case CMD_LEFT:
if (Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) != FAILED)
{
/* Turn ON LED4 */
STM_EVAL_LEDOn(LED4);
/* Turn OFF LED2 and LED3 */
STM_EVAL_LEDOff(LED2);
STM_EVAL_LEDOff(LED3);
}
break;
/* CMD_UP command received or time out*/
case CMD_UP:
if (Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) != FAILED)
{
/* Turn ON LED2 */
STM_EVAL_LEDOn(LED2);
/* Turn OFF LED3 and LED4 */
STM_EVAL_LEDOff(LED3);
STM_EVAL_LEDOff(LED4);
}
break;
/* CMD_DOWN command received or time out */
case CMD_DOWN:
if (Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) != FAILED)
{
/* Turn ON LED3 */
STM_EVAL_LEDOn(LED3);
/* Turn OFF LED2 and LED4 */
STM_EVAL_LEDOff(LED2);
STM_EVAL_LEDOff(LED4);
}
break;
/* CMD_SEL command received or time out */
case CMD_SEL:
if (Buffercmp(TxBuffer, RxBuffer, DATA_SIZE, SPI_DATAMASK) != FAILED)
{
/* Turn ON LED2, LED3 and LED4 */
STM_EVAL_LEDOn(LED2);
STM_EVAL_LEDOn(LED3);
STM_EVAL_LEDOn(LED4);
}
break;
default:
break;
}
/* Clear the RxBuffer */
Fill_Buffer(RxBuffer, TXBUFFERSIZE);
/* Waiting until TX FIFO is empty */
while (SPI_GetTransmissionFIFOStatus(SPIx) != SPI_TransmissionFIFOStatus_Empty)
{}
/* Wait busy flag */
while(SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_BSY) == SET)
{}
/* Disable the Tx buffer empty interrupt */
SPI_I2S_ITConfig(SPIx, SPI_I2S_IT_TXE, DISABLE);
/* Waiting until RX FIFO is empty */
while (SPI_GetReceptionFIFOStatus(SPIx) != SPI_ReceptionFIFOStatus_Empty)
{}
}
#endif /* SPI_SLAVE */
}
void lcd_write_command(uint8_t command)
{
while(SPI_GetTransmissionFIFOStatus(LCD_SPI) >= SPI_TransmissionFIFOStatus_HalfFull);
SPI_I2S_SendData16(LCD_SPI, command);
}
