/****************************************************************************
*
* NAME: cbvMcRxHandler
*
* DESCRIPTION:
*
* RETURNS:
*
****************************************************************************/
PUBLIC void cbToCoNet_vRxEvent(tsRxDataApp *pRx) {
int i;
// print coming payload
V_PRINTF(
"\n\r[PKT Ad:%04x,Ln:%03d,Seq:%03d,Lq:%03d,Tms:%05d \"",
pRx->u32SrcAddr, pRx->u8Len, // Actual payload byte: the network layer uses additional 4 bytes.
pRx->u8Seq, pRx->u8Lqi, pRx->u32Tick & 0xFFFF);
for (i = 0; i < pRx->u8Len; i++) {
if (i < 32) {
V_PUTCHAR((pRx->auData[i] >= 0x20 && pRx->auData[i] <= 0x7f) ?
pRx->auData[i] : '.');
} else {
V_PRINTF( "..");
break;
}
}
V_PRINTF( "\"]");
// 直接受信したパケットを上位へ転送する
if (pRx->auData[0] == 'T') {
tsTxDataApp sTx;
memset(&sTx, 0, sizeof(sTx));
sTx.u32DstAddr = TOCONET_NWK_ADDR_PARENT;
sTx.u32SrcAddr = ToCoNet_u32GetSerial(); // Transmit using Long address
sTx.u8Cmd = 0; // data packet.
sTx.u8Seq = pRx->u8Seq;
sTx.u8CbId = pRx->u8Seq;
sTx.u16DelayMax = 300; // 送信開始の遅延を大きめに設定する
memcpy(sTx.auData, pRx->auData, pRx->u8Len);
sTx.auData[0] = 'R';
sTx.u8Len = pRx->u8Len;
#ifdef USE_AES
sTx.bSecurePacket = TRUE;
#endif
SPRINTF_vRewind();
vfPrintf(SPRINTF_Stream, ":%03d", pRx->u8Lqi);
memcpy(sTx.auData + sTx.u8Len, SPRINTF_pu8GetBuff(), SPRINTF_u16Length());
sTx.u8Len += SPRINTF_u16Length();
ToCoNet_Nwk_bTx(sAppData.pContextNwk, &sTx);
}
}
/****************************************************************************
*
* NAME: vHandleSerialInput
*
* DESCRIPTION:
*
* PARAMETERS: Name RW Usage
*
* RETURNS:
*
* NOTES:
****************************************************************************/
PRIVATE void vHandleSerialInput() {
// handle UART command
while (!SERIAL_bRxQueueEmpty(sSerPort.u8SerialPort)) {
int16 i16Char;
i16Char = SERIAL_i16RxChar(sSerPort.u8SerialPort);
// process
if (i16Char >=0 && i16Char <= 0xFF) {
uint8 u8res = u8ParseSerCmd(&sSerCmd, (uint8)i16Char);
if (u8res == E_SERCMD_VERBOSE) {
vfPrintf(&sSerStream, "\n\rVERBOSE MODE = %s", bSerCmd_VerboseMode ? "ON" : "OFF");
continue;
}
if (!bSerCmd_VerboseMode) continue;
switch (i16Char) {
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
sAppData.sFlash.sData.u8Layer = i16Char - '0';
if (bFlash_Write(&sAppData.sFlash, FLASH_SECTOR_NUMBER - 1, 0)) {
V_PRINTF( LB "Flash Saved (Router Layer #%d)... RESETTING", sAppData.sFlash.sData.u8Layer);
vWait(100000);
vAHI_SwReset();
} else {
V_PRINTF( LB "Failed to save flash...");
}
break;
case 'i': // info
_C {
tsToCoNet_NwkLyTr_Context *pc = (tsToCoNet_NwkLyTr_Context *)(sAppData.pContextNwk);
V_PRINTF( LB "Info: la=%d ty=%d ro=%02x st=%02x",
pc->sInfo.u8Layer, pc->sInfo.u8NwkTypeId, pc->sInfo.u8Role, pc->sInfo.u8State);
V_PRINTF( LB "Parent: %08x", pc->u32AddrHigherLayer);
V_PRINTF( LB "LostParent: %d", pc->u8Ct_LostParent);
V_PRINTF( LB "SecRescan: %d, SecRelocate: %d", pc->u8Ct_Second_To_Rescan, pc->u8Ct_Second_To_Relocate);
}
break;
case '>':
sToCoNet_AppContext.u8Channel++;
if (sToCoNet_AppContext.u8Channel > 25)
sToCoNet_AppContext.u8Channel = 0;
ToCoNet_vRfConfig();
V_PRINTF( LB"channel set to %d.", sToCoNet_AppContext.u8Channel);
break;
case '<':
sToCoNet_AppContext.u8Channel--;
if (sToCoNet_AppContext.u8Channel < 11)
sToCoNet_AppContext.u8Channel = 25;
ToCoNet_vRfConfig();
V_PRINTF( LB"channel set to %d.", sToCoNet_AppContext.u8Channel);
break;
case 't':
SPRINTF_vRewind();
vfPrintf(SPRINTF_Stream, "TEST FROM ROUTER(#%08X)", ToCoNet_u32GetSerial());
bTransmitToParent(sAppData.pContextNwk, SPRINTF_pu8GetBuff(), SPRINTF_u16Length());
break;
case 'd': case 'D':
_C {
static uint8 u8DgbLvl;
u8DgbLvl++;
if(u8DgbLvl > 10) u8DgbLvl = 0;
ToCoNet_vDebugLevel(u8DgbLvl);
V_PRINTF( LB"set NwkCode debug level to %d.", u8DgbLvl);
}
break;
default:
break;
}
}
}
/****************************************************************************
*
* NAME: cbToCoNet_vNwkEvent
*
* DESCRIPTION:
*
* PARAMETERS: Name RW Usage
*
* RETURNS:
*
* NOTES:
****************************************************************************/
void cbToCoNet_vNwkEvent(teEvent eEvent, uint32 u32arg) {
switch(eEvent) {
/*
* ネットワークが開始された
*/
case E_EVENT_TOCONET_NWK_START:
V_PRINTF(LB"[E_EVENT_TOCONET_NWK_START:%d,Ch:%d]", u32TickCount_ms & 0xFFFF, sToCoNet_AppContext.u8Channel);
vDispInfo(&sSerStream, (void*)sAppData.pContextNwk);
// pass this event to the event machine
ToCoNet_Event_Process(E_EVENT_TOCONET_NWK_START, u32arg, vProcessEvCore);
break;
/*
* ネットワークが切断された
*/
case E_EVENT_TOCONET_NWK_DISCONNECT:
V_PRINTF(LB"[E_EVENT_TOCONET_NWK_DISCONNECT]");
// pass this event to the event machine
ToCoNet_Event_Process(E_EVENT_TOCONET_NWK_DISCONNECT, u32arg, vProcessEvCore);
break;
/*
* メッセージプールを受信
*/
case E_EVENT_TOCONET_NWK_MESSAGE_POOL:
if (u32arg) {
tsToCoNet_MsgPl_Entity *pInfo = (void*)u32arg;
int i;
//static uint8 u8seq = 0;
uint8 u8buff[TOCONET_MOD_MESSAGE_POOL_MAX_MESSAGE+1];
memcpy(u8buff, pInfo->au8Message, pInfo->u8MessageLen); // u8Message にデータ u8MessageLen にデータ長
u8buff[pInfo->u8MessageLen] = 0;
// UART にメッセージ出力
if (pInfo->bGotData) { // empty なら FALSE になる
V_PRINTF(LB"---MSGPOOL sl=%d ln=%d msg=",
pInfo->u8Slot,
pInfo->u8MessageLen
);
SPRINTF_vRewind();
for (i = 0; i < pInfo->u8MessageLen; i++) {
vfPrintf(SPRINTF_Stream, "%02X", u8buff[i]);
}
V_PRINTF("%s", SPRINTF_pu8GetBuff());
#ifdef USE_LCD
V_PRINTF_LCD("%02x:%s\r\n", u8seq++, SPRINTF_pu8GetBuff());
vLcdRefresh();
#endif
V_PRINTF("---");
} else {
V_PRINTF(LB"---MSGPOOL sl=%d EMPTY ---",
pInfo->u8Slot
);
#ifdef USE_LCD
V_PRINTF_LCD("%02x: EMPTY\r\n", u8seq++);
vLcdRefresh();
#endif
}
ToCoNet_Event_Process(E_EVENT_APP_GET_IC_INFO, pInfo->bGotData, vProcessEvCore); // vProcessEvCore にイベント送信
}
break;
default:
break;
}
}
