//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bRetcode;
//
// Set the system clock to run at 50MHz from the PLL
//
ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Initialize the status string.
//
UpdateStatus(true, "Monitoring...");
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
//
// Did we have a problem with the address?
//
if(!bRetcode)
{
//
// Yes - make sure the display is updated then hang the app.
//
WidgetMessageQueueProcess();
while(1)
{
//
// MAC address is not set so hang the app.
//
}
}
//
// Initialize the SimpliciTI stack but don't set any receive callback.
//
SMPL_Init(0);
//
// Start monitoring for alert messages from other devices. This function
// doesn't return.
//
MonitorForBadNews();
}
//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bSuccess, bRetcode;
unsigned char pucMsg[2];
unsigned char ucTid;
unsigned char ucDelay;
unsigned long ulLastRxCount, ulLastTxCount;
smplStatus_t eRetcode;
//
// Set the system clock to run at 50MHz from the PLL
//
ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Initialize the status string.
//
UpdateStatus(true, "Please choose the operating mode.");
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
if(!bRetcode)
{
//
// The board does not have a MAC address configured so we can't set
// the SimpliciTI device address (which we derive from the MAC address).
//
while(1);
}
//
// Initialize the SimpliciTI stack and supply our receive callback
// function pointer.
//
SMPL_Init(RxCallback);
//
// Initialize our message ID, initial inter-message delay and packet
// counters.
//
ucTid = 0;
ucDelay = 0;
ulLastRxCount = 0;
ulLastTxCount = 0;
//
// Fall into the command line processing loop.
//
while (1)
{
//
// Process any messages from or for the widgets.
//
WidgetMessageQueueProcess();
//
// Check to see if we've been told to do anything.
//
if(g_ulCommandFlags)
{
//
// Has the mode been set? If so, set up the display to show the
// "LEDs" and then start communication.
//
if(HWREGBITW(&g_ulCommandFlags, COMMAND_MODE_SET))
{
//
// Clear the bit now that we have seen it.
//
HWREGBITW(&g_ulCommandFlags, COMMAND_MODE_SET) = 0;
//
// Remove the buttons and replace them with the LEDs then
// repaint the display.
//
WidgetRemove((tWidget *)&g_sBtnContainer);
WidgetAdd((tWidget *)&g_sBackground,
(tWidget *)&g_sLEDContainer);
WidgetPaint((tWidget *)&g_sBackground);
//
// Now call the function that initiates communication in
// the desired mode. Note that these functions will not return
// until communication is established or an error occurs.
//
if(g_ulMode == MODE_TALKER)
{
bSuccess = LinkTo();
}
else
{
bSuccess = LinkFrom();
}
//
// If we were unsuccessfull, go back to the mode selection
// display.
//
if(!bSuccess)
{
//
// Remove the LEDs and show the buttons again.
//
WidgetRemove((tWidget *)&g_sLEDContainer);
WidgetAdd((tWidget *)&g_sBackground,
(tWidget *)&g_sBtnContainer);
WidgetPaint((tWidget *)&g_sBackground);
//
// Tell the user what happened.
//
UpdateStatus(false, "Error establishing communication!");
UpdateStatus(true, "Please choose the operating mode.");
//
// Remember that we don't have an operating mode chosen.
//
g_ulMode = MODE_UNDEFINED;
}
}
//
// Have we been asked to toggle the first "LED"?
//
if(HWREGBITW(&g_ulCommandFlags, COMMAND_LED1_TOGGLE))
{
//
// Clear the bit now that we have seen it.
//
HWREGBITW(&g_ulCommandFlags, COMMAND_LED1_TOGGLE) = 0;
//
// Toggle the LED.
//
ToggleLED(1);
}
//
// Have we been asked to toggle the second "LED"?
//
if(HWREGBITW(&g_ulCommandFlags, COMMAND_LED2_TOGGLE))
{
//
// Clear the bit now that we have seen it.
//
HWREGBITW(&g_ulCommandFlags, COMMAND_LED2_TOGGLE) = 0;
//
// Toggle the LED.
//
ToggleLED(2);
}
//
// Have we been asked to send a packet back to our peer? This
// command is only ever sent to the main loop when we are running
// in listener mode (LinkListen).
//
if(HWREGBITW(&g_ulCommandFlags, COMMAND_SEND_REPLY))
{
//
// Clear the bit now that we have seen it.
//
HWREGBITW(&g_ulCommandFlags, COMMAND_SEND_REPLY) = 0;
//
// Create the message. The first byte tells the receiver to
// toggle LED1 and the second is a sequence counter.
//
pucMsg[0] = 1;
pucMsg[1] = ++ucTid;
eRetcode = SMPL_Send(sLinkID, pucMsg, 2);
//
// Update our transmit counter if we transmitted the packet
// successfully.
//
if(eRetcode == SMPL_SUCCESS)
{
g_ulTxCount++;
}
else
{
UpdateStatus(false, "TX error %s (%d)", MapSMPLStatus(eRetcode),
eRetcode);
}
}
}
//
// If we are the talker (LinkTo mode), check to see if it's time to
// send another packet to our peer.
//
if((g_ulMode == MODE_TALKER) &&
(g_ulSysTickCount >= g_ulNextPacketTick))
{
//
// Create the message. The first byte tells the receiver to
// toggle LED1 and the second is a sequence counter.
//
pucMsg[0] = 1;
pucMsg[1] = ++ucTid;
eRetcode = SMPL_Send(sLinkID, pucMsg, 2);
//
// Update our transmit counter if we transmitted the packet
// correctly.
//
if(eRetcode == SMPL_SUCCESS)
{
g_ulTxCount++;
}
else
{
UpdateStatus(false, "TX error %s (%d)", MapSMPLStatus(eRetcode),
eRetcode);
}
//
// Set the delay before the next message.
//
#ifndef USE_2_SECOND_DELAY
//
// Set the delay before the next message. We increase this from 1
// second to 4 seconds then cycle back to 1.
//
ucDelay = (ucDelay == 4) ? 1 : (ucDelay + 1);
#else
//
// Wait 2 seconds before sending the next message.
//
ucDelay = 2;
#endif
//
// Calculate the system tick count when our delay has completed.
// This algorithm will generate a spurious packet every 13.7 years
// since I don't handle the rollover case in the comparison above
// but I'm pretty sure you will forgive me for this oversight.
//
g_ulNextPacketTick = g_ulSysTickCount +
(TICKS_PER_SECOND * ucDelay);
}
//
// If either the transmit or receive packet count changed, update
// the status on the display.
//
if((g_ulRxCount != ulLastRxCount) || (g_ulTxCount != ulLastTxCount))
{
ulLastTxCount = g_ulTxCount;
ulLastRxCount = g_ulRxCount;
UpdateStatus(false, "Received %d pkts, sent %d (%d)",
ulLastRxCount, ulLastTxCount);
}
}
}
//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bRetcode;
smplStatus_t eRetcode;
ioctlScanChan_t sScan;
freqEntry_t pFreq[NWK_FREQ_TBL_SIZE];
tBoolean bFirstTimeThrough;
unsigned long ulLoop;
uint8_t ucLast;
//
// Set the system clock to run at 50MHz from the PLL
//
ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Initialize the status string.
//
UpdateStatus("Initializing...");
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
//
// Did we have a problem with the address?
//
if(!bRetcode)
{
//
// Yes - make sure the display is updated then hang the app.
//
WidgetMessageQueueProcess();
while(1)
{
//
// MAC address is not set so hang the app.
//
}
}
//
// Turn on both our LEDs
//
SetLED(1, true);
SetLED(2, true);
UpdateStatus("Joining network...");
//
// Initialize the SimpliciTI stack but don't set any receive callback.
//
while(1)
{
eRetcode = SMPL_Init((uint8_t (*)(linkID_t))0);
if(eRetcode == SMPL_SUCCESS)
{
break;
}
ToggleLED(1);
ToggleLED(2);
SPIN_ABOUT_A_SECOND;
}
//
// Tell the user what's up.
//
UpdateStatus("Sniffing...");
//
// Set up for our first sniff.
//
sScan.freq = pFreq;
bFirstTimeThrough = true;
ucLast = 0xFF;
//
// Keep sniffing forever.
//
while (1)
{
//
// Wait a while.
//
SPIN_ABOUT_A_QUARTER_SECOND;
//
// Scan for the active channel.
//
SMPL_Ioctl(IOCTL_OBJ_FREQ, IOCTL_ACT_SCAN, &sScan);
//
// Did we find a signal?
//
if (1 == sScan.numChan)
{
if (bFirstTimeThrough)
{
//
// Set the initial LED state.
//
SetLED(1, false);
SetLED(2, true);
//
// Wait a while.
//
for(ulLoop = 0; ulLoop < 15; ulLoop--)
{
//
// Toggle both LEDs and wait a bit.
//
ToggleLED(1);
ToggleLED(2);
SPIN_ABOUT_A_QUARTER_SECOND;
}
bFirstTimeThrough = false;
}
//
// Has the channel changed since the last time we updated the
// display?
//
if(pFreq[0].logicalChan != ucLast)
{
//
// Remember the channel we just detected.
//
ucLast = pFreq[0].logicalChan;
//
// Tell the user which channel we found to be active.
//
UpdateStatus("Active channel is %d.", pFreq[0].logicalChan);
//
// Set the "LEDs" to mimic the behavior of the MSP430 versions
// of this application.
//
switch(pFreq[0].logicalChan)
{
case 0:
{
/* GREEN OFF */
/* RED OFF */
SetLED(1, false);
SetLED(2, false);
break;
}
case 1:
{
/* GREEN OFF */
/* RED ON */
SetLED(1, false);
SetLED(2, true);
break;
}
case 2:
{
/* GREEN ON */
/* RED OFF */
SetLED(1, true);
SetLED(2, false);
break;
}
case 3:
{
/* GREEN ON */
/* RED ON */
SetLED(1, true);
SetLED(2, true);
break;
}
case 4:
{
/* blink them both... */
SetLED(1, false);
SetLED(2, false);
SPIN_ABOUT_A_QUARTER_SECOND;
SetLED(1, true);
SetLED(2, true);
SPIN_ABOUT_A_QUARTER_SECOND;
SetLED(1, false);
SetLED(2, false);
}
}
}
}
}
}
//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bRetcode;
bspIState_t intState;
uint8_t ucLastChannel;
//
// Set the system clock to run at 50MHz from the PLL
//
ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Initialize the status string.
//
UpdateStatus(true, "Initializing...");
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
//
// Did we have a problem with the address?
//
if(!bRetcode)
{
//
// Yes - make sure the display is updated then hang the app.
//
WidgetMessageQueueProcess();
while(1)
{
//
// MAC address is not set so hang the app.
//
}
}
//
// Turn on both our LEDs
//
SetLED(1, true);
SetLED(2, true);
UpdateStatus(true, "Waiting for a device...");
//
// Initialize the SimpliciTI stack and register our receive callback.
//
SMPL_Init(ReceiveCallback);
//
// Tell the user what's up.
//
UpdateStatus(true, "Access point active.");
//
// Do nothing after this - the SimpliciTI stack code handles all the
// access point function required.
//
while(1)
{
//
// Wait for the Join semaphore to be set by the receipt of a Join
// frame from a device that supports an end device.
//
// An external method could be used as well. A button press could be
// connected to an ISR and the ISR could set a semaphore that is
// checked by a function call here, or a command shell running in
// support of a serial connection could set a semaphore that is
// checked by a function call.
//
if (g_ucJoinSem && (g_ucNumCurrentPeers < NUM_CONNECTIONS))
{
//
// Listen for a new incoming connection.
//
while (1)
{
if (SMPL_SUCCESS == SMPL_LinkListen(&g_sLID[g_ucNumCurrentPeers]))
{
//
// The connection attempt succeeded so break out of the
// loop.
//
break;
}
//
// Process our widget message queue.
//
WidgetMessageQueueProcess();
//
// A "real" application would implement its fail-to-link
// policy here. We go back and listen again.
//
}
//
// Increment our peer counter.
//
g_ucNumCurrentPeers++;
//
// Decrement the join semaphore.
//
BSP_ENTER_CRITICAL_SECTION(intState);
g_ucJoinSem--;
BSP_EXIT_CRITICAL_SECTION(intState);
//
// Tell the user how many devices we are now connected to.
//
UpdateStatus(false, "%d devices connected.", g_ucNumCurrentPeers);
}
//
// Have we received a frame on one of the ED connections? We don't use
// a critical section here since it doesn't really matter much if we
// miss a poll.
//
if (g_ucPeerFrameSem)
{
uint8_t pucMsg[MAX_APP_PAYLOAD], ucLen, ucLoop;
/* process all frames waiting */
for (ucLoop = 0; ucLoop < g_ucNumCurrentPeers; ucLoop++)
{
//
// Receive the message.
//
if (SMPL_SUCCESS == SMPL_Receive(g_sLID[ucLoop], pucMsg,
&ucLen))
{
//
// ...and pass it to the function that processes it.
//
ProcessMessage(g_sLID[ucLoop], pucMsg, ucLen);
//
// Decrement our frame semaphore.
//
BSP_ENTER_CRITICAL_SECTION(intState);
g_ucPeerFrameSem--;
BSP_EXIT_CRITICAL_SECTION(intState);
}
}
}
//
// Have we been asked to change channel?
//
ucLastChannel = g_ucChannel;
if (g_bChangeChannel)
{
//
// Yes - go ahead and change to the next radio channel.
//
g_bChangeChannel = false;
ChangeChannel();
}
else
{
//
// No - check to see if we need to automatically change channel
// due to interference on the current one.
//
CheckChangeChannel();
}
//
// If the channel changed, update the display.
//
if(g_ucChannel != ucLastChannel)
{
UpdateStatus(false, "Changed to channel %d.", g_ucChannel);
}
//
// If required, blink the "LEDs" to indicate we are waiting for a
// message following a channel change.
//
BSP_ENTER_CRITICAL_SECTION(intState);
if (g_ulBlinky)
{
if (++g_ulBlinky >= 0xF)
{
g_ulBlinky = 1;
ToggleLED(1);
ToggleLED(2);
}
}
BSP_EXIT_CRITICAL_SECTION(intState);
//
// Process our widget message queue.
//
WidgetMessageQueueProcess();
}
}
//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bSuccess, bRetcode, bInitialized;
//
// Set the system clock to run at 50MHz from the PLL
//
MAP_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
if(!bRetcode)
{
//
// The Ethernet MAC address can't have been set so hang here since we
// don't have an address to use for SimpliciTI.
//
WidgetMessageQueueProcess();
while(1)
{
//
// MAC address is not set so hang the app.
//
}
}
//
// First time through, we need to initialize the SimpliciTI stack.
//
bInitialized = false;
//
// The main loop starts here now that we have joined the network.
//
while(1)
{
//
// Tell the user what to do.
//
UpdateStatus(true, "Please choose the operating mode.");
//
// Now wait until the user selects whether we should run as the sender
// or the receiver.
//
while(g_ulMode == MODE_UNDEFINED)
{
//
// Just spin, processing UI messages and waiting for someone to
// press one of the mode buttons.
//
WidgetMessageQueueProcess();
}
//
// At this point, the mode is set so remove the buttons from the
// display and replace them with the LEDs.
//
WidgetRemove((tWidget *)&g_sBtnContainer);
WidgetAdd((tWidget *)&g_sBackground,
(tWidget *)&g_sLEDContainer);
WidgetPaint((tWidget *)&g_sBackground);
//
// Tell the user what we're doing now.
//
UpdateStatus(false, "Joining network...");
if(!bInitialized)
{
//
// Initialize the SimpliciTI stack We keep trying to initialize until
// we get a success return code. This indicates that we have also
// successfully joined the network.
//
while(SMPL_SUCCESS != SMPL_Init((uint8_t (*)(linkID_t))0))
{
ToggleLED(1);
ToggleLED(2);
SPIN_ABOUT_A_SECOND;
}
//
// Now that we are initialized, remember not to call this again.
//
bInitialized = true;
}
//
// Once we have joined, turn both LEDs on and tell the user what we want
// them to do.
//
SetLED(1, true);
SetLED(2, true);
//
// Now call the function that initiates communication in
// the desired mode. Note that these functions will not return
// until communication is established or an error occurs.
//
if(g_ulMode == MODE_SENDER)
{
bSuccess = LinkTo();
}
else
{
bSuccess = LinkFrom();
}
//
// If we were unsuccessfull, go back to the mode selection
// display.
//
if(!bSuccess)
{
//
// Remove the LEDs and show the buttons again.
//
WidgetRemove((tWidget *)&g_sLEDContainer);
WidgetAdd((tWidget *)&g_sBackground, (tWidget *)&g_sBtnContainer);
WidgetPaint((tWidget *)&g_sBackground);
//
// Tell the user what happened.
//
UpdateStatus(false, "Error establishing communication!");
//
// Remember that we don't have an operating mode chosen.
//
g_ulMode = MODE_UNDEFINED;
}
}
}
//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bRetcode;
smplStatus_t eRetcode;
//
// Set the system clock to run at 50MHz from the PLL
//
MAP_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Initialize the status string.
//
UpdateStatus("Initializing...");
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
//
// Did we have a problem with the address?
//
if(!bRetcode)
{
//
// Yes - make sure the display is updated then hang the app.
//
WidgetMessageQueueProcess();
while(1)
{
//
// MAC address is not set so hang the app.
//
}
}
//
// Turn on both our LEDs
//
SetLED(1, true);
SetLED(2, true);
UpdateStatus("Waiting...");
//
// Initialize the SimpliciTI stack but don't set any receive callback.
//
while(1)
{
eRetcode = SMPL_Init((uint8_t (*)(linkID_t))0);
if(eRetcode == SMPL_SUCCESS)
{
break;
}
ToggleLED(1);
ToggleLED(2);
SPIN_ABOUT_A_SECOND;
}
//
// Tell the user what's up.
//
UpdateStatus("Range Extender active.");
//
// Do nothing after this - the SimpliciTI stack code handles all the
// access point function required.
//
while(1)
{
//
// Process the widget message queue.
//
WidgetMessageQueueProcess();
}
}
//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bRetcode;
smplStatus_t eRetcode;
ioctlToken_t eToken;
//
// Set the system clock to run at 50MHz from the PLL
//
ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Initialize the status string.
//
UpdateStatus("Initializing...");
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
//
// Did we have a problem with the address?
//
if(!bRetcode)
{
//
// Yes - make sure the display is updated then hang the app.
//
WidgetMessageQueueProcess();
while(1)
{
//
// MAC address is not set so hang the app.
//
}
}
//
// Turn on both our LEDs
//
SetLED(1, true);
SetLED(2, true);
UpdateStatus("Waiting...");
//
// Initialize the SimpliciTI stack but don't set any receive callback.
//
while(1)
{
eRetcode = SMPL_Init((uint8_t (*)(linkID_t))0);
if(eRetcode == SMPL_SUCCESS)
{
break;
}
ToggleLED(1);
ToggleLED(2);
SPIN_ABOUT_A_SECOND;
}
// This code example changes the Link token to be distributed to those who
// Join. For the example here this should be done before anyone joins so
// the Join context is defaulted to OFF for this scenario. See the
// smpl_config.dat file. After the link token is set the Join context must
// be enabled.
//
// NOTE that this is done after initialization. For APs the init sequence
// consists of a step in which a link token is generated. The sequence here
// overrides that setting. It can be used to distribute different link
// tokens to different devices. The sequence here is a simple example of
// how to use the IOCTL interface to set the Link token for subsequent
// Joiners.
//
// You might want to be careful about following this particular example if
// you are restoring from NV unless you are setting a fixed value as is
// done here. Unconditionally setting a random value will make it
// essentially impossible for newly joining devices to link to devices that
// joined before the AP was reset since they will have different link
// tokens.
//
eToken.tokenType = TT_LINK;
eToken.token.linkToken = 0x78563412;
SMPL_Ioctl(IOCTL_OBJ_TOKEN, IOCTL_ACT_SET, &eToken);
//
// Enable join context.
//
SMPL_Ioctl(IOCTL_OBJ_AP_JOIN, IOCTL_ACT_ON, 0);
//
// Tell the user what's up.
//
UpdateStatus("Access point active.");
//
// Do nothing after this - the SimpliciTI stack code handles all the
// access point function required.
//
while(1)
{
//
// Process the widget message queue.
//
WidgetMessageQueueProcess();
}
}
//*****************************************************************************
//
// Main application entry function.
//
//*****************************************************************************
int
main(void)
{
tBoolean bRetcode;
//
// Set the system clock to run at 50MHz from the PLL
//
ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// NB: We don't call PinoutSet() in this testcase since the EM header
// expansion board doesn't currently have an I2C ID EEPROM. If we did
// call PinoutSet() this would configure all the EPI pins for SDRAM and
// we don't want to do this.
//
g_eDaughterType = DAUGHTER_NONE;
//
// Enable peripherals required to drive the LCD.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOD);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOE);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOH);
//
// Configure SysTick for a 10Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Initialize the display driver.
//
Kitronix320x240x16_SSD2119Init();
//
// Initialize the touch screen driver.
//
TouchScreenInit();
//
// Set the touch screen event handler.
//
TouchScreenCallbackSet(WidgetPointerMessage);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sHeading);
//
// Initialize the status string.
//
UpdateStatus(true, "Joining network...");
//
// Paint the widget tree to make sure they all appear on the display.
//
WidgetPaint(WIDGET_ROOT);
//
// Initialize the SimpliciTI BSP.
//
BSP_Init();
//
// Set the SimpliciTI device address using the current Ethernet MAC address
// to ensure something like uniqueness.
//
bRetcode = SetSimpliciTIAddress();
//
// Did we have a problem with the address?
//
if(!bRetcode)
{
//
// Yes - make sure the display is updated then hang the app.
//
WidgetMessageQueueProcess();
while(1)
{
//
// MAC address is not set so hang the app.
//
}
}
//
// Turn both "LEDs" off.
//
SetLED(1, false);
SetLED(2, false);
//
// Keep trying to join (a side effect of successful initialization) until
// successful. Toggle LEDS to indicate that joining has not occurred.
//
while(SMPL_SUCCESS != SMPL_Init(0))
{
ToggleLED(1);
ToggleLED(2);
SPIN_ABOUT_A_SECOND;
}
//
// We have joined the network so turn on both "LEDs" to indicate this.
//
SetLED(1, true);
SetLED(2, true);
UpdateStatus(true, "Joined network");
//
// Link to the access point which is now listening for us and continue
// processing. This function does not return.
//
LinkTo();
}
