int SkPaintPriv::ValidCountText(const void* text, size_t length, SkPaint::TextEncoding encoding) {
if (length == 0) {
return 0;
}
switch (encoding) {
case SkPaint::kUTF8_TextEncoding: return SkUTF8_CountUnichars(text, length);
case SkPaint::kUTF16_TextEncoding: return SkUTF16_CountUnichars(text, length);
case SkPaint::kUTF32_TextEncoding: return SkUTF32_CountUnichars(text, length);
case SkPaint::kGlyphID_TextEncoding:
if (SkIsAlign2(intptr_t(text)) && SkIsAlign2(length)) {
return length >> 1;
}
break;
}
return 0;
}
SkPathEffect* SkDashPathEffect::Create(const SkScalar intervals[], int count, SkScalar phase) {
if ((count < 2) || !SkIsAlign2(count)) {
return nullptr;
}
for (int i = 0; i < count; i++) {
if (intervals[i] < 0) {
return nullptr;
}
}
return new SkDashPathEffect(intervals, count, phase);
}
bool SkDashPath::ValidDashPath(SkScalar phase, const SkScalar intervals[], int32_t count) {
if (count < 2 || !SkIsAlign2(count)) {
return false;
}
SkScalar length = 0;
for (int i = 0; i < count; i++) {
if (intervals[i] < 0) {
return false;
}
length += intervals[i];
}
// watch out for values that might make us go out of bounds
return length > 0 && SkScalarIsFinite(phase) && SkScalarIsFinite(length);
}
void SkPipeCanvas::onDrawVertices(VertexMode vmode, int vertexCount,
const SkPoint vertices[], const SkPoint texs[],
const SkColor colors[], SK_XFERMODE_PARAM xmode,
const uint16_t indices[], int indexCount,
const SkPaint& paint) {
SkASSERT(vertexCount > 0);
unsigned extra = 0;
if (vertexCount <= kVCount_DrawVerticesMask) {
extra |= vertexCount;
}
extra |= (unsigned)vmode << kVMode_DrawVerticesShift;
#ifdef SK_SUPPORT_LEGACY_XFERMODE_PARAM
SkBlendMode bmode = xmode ? xmode->blend() : SkBlendMode::kModulate;
#else
SkBlendMode bmode = xmode;
#endif
extra |= (unsigned)bmode << kXMode_DrawVerticesShift;
if (texs) {
extra |= kHasTex_DrawVerticesMask;
}
if (colors) {
extra |= kHasColors_DrawVerticesMask;
}
if (indexCount > 0) {
extra |= kHasIndices_DrawVerticesMask;
}
SkPipeWriter writer(this);
writer.write32(pack_verb(SkPipeVerb::kDrawVertices, extra));
if (vertexCount > kVCount_DrawVerticesMask) {
writer.write32(vertexCount);
}
writer.write(vertices, vertexCount * sizeof(SkPoint));
if (texs) {
writer.write(texs, vertexCount * sizeof(SkPoint));
}
if (colors) {
writer.write(colors, vertexCount * sizeof(SkColor));
}
if (indexCount > 0) {
writer.write32(indexCount);
SkASSERT(SkIsAlign2(indexCount));
writer.write(indices, indexCount * sizeof(uint16_t));
}
write_paint(writer, paint, kVertices_PaintUsage);
}
SkDashPathEffect::SkDashPathEffect(const SkScalar intervals[], int count, SkScalar phase)
: fPhase(0)
, fInitialDashLength(-1)
, fInitialDashIndex(0)
, fIntervalLength(0) {
SkASSERT(intervals);
SkASSERT(count > 1 && SkIsAlign2(count));
fIntervals = (SkScalar*)sk_malloc_throw(sizeof(SkScalar) * count);
fCount = count;
for (int i = 0; i < count; i++) {
fIntervals[i] = intervals[i];
}
// set the internal data members
SkDashPath::CalcDashParameters(phase, fIntervals, fCount,
&fInitialDashLength, &fInitialDashIndex, &fIntervalLength, &fPhase);
}
static void check(skiatest::Reporter* r,
const char path[],
SkISize size,
bool supportsScanlineDecoding,
bool supportsSubsetDecoding,
bool supportsIncomplete = true) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkCodec> codec(nullptr);
bool isIncomplete = supportsIncomplete;
if (isIncomplete) {
size_t size = stream->getLength();
SkAutoTUnref<SkData> data((SkData::NewFromStream(stream, 2 * size / 3)));
codec.reset(SkCodec::NewFromData(data));
} else {
codec.reset(SkCodec::NewFromStream(stream.detach()));
}
if (!codec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
// Test full image decodes with SkCodec
SkMD5::Digest codecDigest;
SkImageInfo info = codec->getInfo().makeColorType(kN32_SkColorType);
SkBitmap bm;
SkCodec::Result expectedResult = isIncomplete ? SkCodec::kIncompleteInput : SkCodec::kSuccess;
test_codec(r, codec.get(), bm, info, size, expectedResult, &codecDigest, nullptr);
// Scanline decoding follows.
// Need to call startScanlineDecode() first.
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
REPORTER_ASSERT(r, codec->skipScanlines(1)
== 0);
const SkCodec::Result startResult = codec->startScanlineDecode(info);
if (supportsScanlineDecoding) {
bm.eraseColor(SK_ColorYELLOW);
REPORTER_ASSERT(r, startResult == SkCodec::kSuccess);
for (int y = 0; y < info.height(); y++) {
const int lines = codec->getScanlines(bm.getAddr(0, y), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, 1 == lines);
}
}
// verify that scanline decoding gives the same result.
if (SkCodec::kTopDown_SkScanlineOrder == codec->getScanlineOrder()) {
compare_to_good_digest(r, codecDigest, bm);
}
// Cannot continue to decode scanlines beyond the end
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
// Interrupting a scanline decode with a full decode starts from
// scratch
REPORTER_ASSERT(r, codec->startScanlineDecode(info) == SkCodec::kSuccess);
const int lines = codec->getScanlines(bm.getAddr(0, 0), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, lines == 1);
}
REPORTER_ASSERT(r, codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes())
== expectedResult);
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
REPORTER_ASSERT(r, codec->skipScanlines(1)
== 0);
// Test partial scanline decodes
if (supports_scaled_codec(path) && info.width() >= 3) {
SkCodec::Options options;
int width = info.width();
int height = info.height();
SkIRect subset = SkIRect::MakeXYWH(2 * (width / 3), 0, width / 3, height);
options.fSubset = ⊂
const SkCodec::Result partialStartResult = codec->startScanlineDecode(info, &options,
nullptr, nullptr);
REPORTER_ASSERT(r, partialStartResult == SkCodec::kSuccess);
for (int y = 0; y < height; y++) {
const int lines = codec->getScanlines(bm.getAddr(0, y), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, 1 == lines);
}
}
}
} else {
REPORTER_ASSERT(r, startResult == SkCodec::kUnimplemented);
}
// The rest of this function tests decoding subsets, and will decode an arbitrary number of
// random subsets.
// Do not attempt to decode subsets of an image of only once pixel, since there is no
// meaningful subset.
if (size.width() * size.height() == 1) {
return;
}
SkRandom rand;
SkIRect subset;
SkCodec::Options opts;
opts.fSubset = ⊂
for (int i = 0; i < 5; i++) {
subset = generate_random_subset(&rand, size.width(), size.height());
SkASSERT(!subset.isEmpty());
const bool supported = codec->getValidSubset(&subset);
REPORTER_ASSERT(r, supported == supportsSubsetDecoding);
SkImageInfo subsetInfo = info.makeWH(subset.width(), subset.height());
SkBitmap bm;
bm.allocPixels(subsetInfo);
const SkCodec::Result result = codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes(),
&opts, nullptr, nullptr);
if (supportsSubsetDecoding) {
REPORTER_ASSERT(r, result == expectedResult);
// Webp is the only codec that supports subsets, and it will have modified the subset
// to have even left/top.
REPORTER_ASSERT(r, SkIsAlign2(subset.fLeft) && SkIsAlign2(subset.fTop));
} else {
// No subsets will work.
REPORTER_ASSERT(r, result == SkCodec::kUnimplemented);
}
}
// SkScaledCodec tests
if ((supportsScanlineDecoding || supportsSubsetDecoding) && supports_scaled_codec(path)) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkAndroidCodec> androidCodec(nullptr);
if (isIncomplete) {
size_t size = stream->getLength();
SkAutoTUnref<SkData> data((SkData::NewFromStream(stream, 2 * size / 3)));
androidCodec.reset(SkAndroidCodec::NewFromData(data));
} else {
androidCodec.reset(SkAndroidCodec::NewFromStream(stream.detach()));
}
if (!androidCodec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
SkBitmap bm;
SkMD5::Digest scaledCodecDigest;
test_codec(r, androidCodec.get(), bm, info, size, expectedResult, &scaledCodecDigest,
&codecDigest);
}
// Test SkCodecImageGenerator
if (!isIncomplete) {
SkAutoTDelete<SkStream> stream(resource(path));
SkAutoTUnref<SkData> fullData(SkData::NewFromStream(stream, stream->getLength()));
SkAutoTDelete<SkImageGenerator> gen(SkCodecImageGenerator::NewFromEncodedCodec(fullData));
SkBitmap bm;
bm.allocPixels(info);
SkAutoLockPixels autoLockPixels(bm);
REPORTER_ASSERT(r, gen->getPixels(info, bm.getPixels(), bm.rowBytes()));
compare_to_good_digest(r, codecDigest, bm);
}
// If we've just tested incomplete decodes, let's run the same test again on full decodes.
if (isIncomplete) {
check(r, path, size, supportsScanlineDecoding, supportsSubsetDecoding, false);
}
}
/*
* Performs the bitmap decoding for RLE input format
* RLE decoding is performed all at once, rather than a one row at a time
*/
SkCodec::Result SkBmpRLECodec::decode(const SkImageInfo& dstInfo,
void* dst, size_t dstRowBytes,
const Options& opts) {
// Set RLE flags
static const uint8_t RLE_ESCAPE = 0;
static const uint8_t RLE_EOL = 0;
static const uint8_t RLE_EOF = 1;
static const uint8_t RLE_DELTA = 2;
// Set constant values
const int width = dstInfo.width();
const int height = dstInfo.height();
// Destination parameters
int x = 0;
int y = 0;
// Set the background as transparent. Then, if the RLE code skips pixels,
// the skipped pixels will be transparent.
// Because of the need for transparent pixels, kN32 is the only color
// type that makes sense for the destination format.
SkASSERT(kN32_SkColorType == dstInfo.colorType());
if (kNo_ZeroInitialized == opts.fZeroInitialized) {
SkSwizzler::Fill(dst, dstInfo, dstRowBytes, height, SK_ColorTRANSPARENT, NULL);
}
while (true) {
// If we have reached a row that is beyond the requested height, we have
// succeeded.
if (y >= height) {
// It would be better to check for the EOF marker before returning
// success, but we may be performing a scanline decode, which
// may require us to stop before decoding the full height.
return kSuccess;
}
// Every entry takes at least two bytes
if ((int) fRLEBytes - fCurrRLEByte < 2) {
SkCodecPrintf("Warning: might be incomplete RLE input.\n");
if (this->checkForMoreData() < 2) {
return kIncompleteInput;
}
}
// Read the next two bytes. These bytes have different meanings
// depending on their values. In the first interpretation, the first
// byte is an escape flag and the second byte indicates what special
// task to perform.
const uint8_t flag = fStreamBuffer.get()[fCurrRLEByte++];
const uint8_t task = fStreamBuffer.get()[fCurrRLEByte++];
// Perform decoding
if (RLE_ESCAPE == flag) {
switch (task) {
case RLE_EOL:
x = 0;
y++;
break;
case RLE_EOF:
return kSuccess;
case RLE_DELTA: {
// Two bytes are needed to specify delta
if ((int) fRLEBytes - fCurrRLEByte < 2) {
SkCodecPrintf("Warning: might be incomplete RLE input.\n");
if (this->checkForMoreData() < 2) {
return kIncompleteInput;
}
}
// Modify x and y
const uint8_t dx = fStreamBuffer.get()[fCurrRLEByte++];
const uint8_t dy = fStreamBuffer.get()[fCurrRLEByte++];
x += dx;
y += dy;
if (x > width || y > height) {
SkCodecPrintf("Warning: invalid RLE input.\n");
return kInvalidInput;
}
break;
}
default: {
// If task does not match any of the above signals, it
// indicates that we have a sequence of non-RLE pixels.
// Furthermore, the value of task is equal to the number
// of pixels to interpret.
uint8_t numPixels = task;
const size_t rowBytes = compute_row_bytes(numPixels,
this->bitsPerPixel());
// Abort if setting numPixels moves us off the edge of the
// image.
if (x + numPixels > width) {
SkCodecPrintf("Warning: invalid RLE input.\n");
return kInvalidInput;
}
// Also abort if there are not enough bytes
// remaining in the stream to set numPixels.
if ((int) fRLEBytes - fCurrRLEByte < SkAlign2(rowBytes)) {
SkCodecPrintf("Warning: might be incomplete RLE input.\n");
if (this->checkForMoreData() < SkAlign2(rowBytes)) {
return kIncompleteInput;
}
}
// Set numPixels number of pixels
while (numPixels > 0) {
switch(this->bitsPerPixel()) {
case 4: {
SkASSERT(fCurrRLEByte < fRLEBytes);
uint8_t val = fStreamBuffer.get()[fCurrRLEByte++];
setPixel(dst, dstRowBytes, dstInfo, x++,
y, val >> 4);
numPixels--;
if (numPixels != 0) {
setPixel(dst, dstRowBytes, dstInfo,
x++, y, val & 0xF);
numPixels--;
}
break;
}
case 8:
SkASSERT(fCurrRLEByte < fRLEBytes);
setPixel(dst, dstRowBytes, dstInfo, x++,
y, fStreamBuffer.get()[fCurrRLEByte++]);
numPixels--;
break;
case 24: {
SkASSERT(fCurrRLEByte + 2 < fRLEBytes);
uint8_t blue = fStreamBuffer.get()[fCurrRLEByte++];
uint8_t green = fStreamBuffer.get()[fCurrRLEByte++];
uint8_t red = fStreamBuffer.get()[fCurrRLEByte++];
setRGBPixel(dst, dstRowBytes, dstInfo,
x++, y, red, green, blue);
numPixels--;
}
default:
SkASSERT(false);
return kInvalidInput;
}
}
// Skip a byte if necessary to maintain alignment
if (!SkIsAlign2(rowBytes)) {
fCurrRLEByte++;
}
break;
}
}
} else {
// If the first byte read is not a flag, it indicates the number of
// pixels to set in RLE mode.
const uint8_t numPixels = flag;
const int endX = SkTMin<int>(x + numPixels, width);
if (24 == this->bitsPerPixel()) {
// In RLE24, the second byte read is part of the pixel color.
// There are two more required bytes to finish encoding the
// color.
if ((int) fRLEBytes - fCurrRLEByte < 2) {
SkCodecPrintf("Warning: might be incomplete RLE input.\n");
if (this->checkForMoreData() < 2) {
return kIncompleteInput;
}
}
// Fill the pixels up to endX with the specified color
uint8_t blue = task;
uint8_t green = fStreamBuffer.get()[fCurrRLEByte++];
uint8_t red = fStreamBuffer.get()[fCurrRLEByte++];
while (x < endX) {
setRGBPixel(dst, dstRowBytes, dstInfo, x++, y, red,
green, blue);
}
} else {
// In RLE8 or RLE4, the second byte read gives the index in the
// color table to look up the pixel color.
// RLE8 has one color index that gets repeated
// RLE4 has two color indexes in the upper and lower 4 bits of
// the bytes, which are alternated
uint8_t indices[2] = { task, task };
if (4 == this->bitsPerPixel()) {
indices[0] >>= 4;
indices[1] &= 0xf;
}
// Set the indicated number of pixels
for (int which = 0; x < endX; x++) {
setPixel(dst, dstRowBytes, dstInfo, x, y,
indices[which]);
which = !which;
}
}
}
static void check(skiatest::Reporter* r,
const char path[],
SkISize size,
bool supportsScanlineDecoding,
bool supportsSubsetDecoding,
bool supports565 = true) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkCodec> codec(SkCodec::NewFromStream(stream.detach()));
if (!codec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
// This test is used primarily to verify rewinding works properly. Using kN32 allows
// us to test this without the added overhead of creating different bitmaps depending
// on the color type (ex: building a color table for kIndex8). DM is where we test
// decodes to all possible destination color types.
SkImageInfo info = codec->getInfo().makeColorType(kN32_SkColorType);
REPORTER_ASSERT(r, info.dimensions() == size);
{
// Test decoding to 565
SkImageInfo info565 = info.makeColorType(kRGB_565_SkColorType);
SkCodec::Result expected = (supports565 && info.alphaType() == kOpaque_SkAlphaType) ?
SkCodec::kSuccess : SkCodec::kInvalidConversion;
test_info(r, codec, info565, expected, NULL);
}
SkBitmap bm;
bm.allocPixels(info);
SkAutoLockPixels autoLockPixels(bm);
SkCodec::Result result =
codec->getPixels(info, bm.getPixels(), bm.rowBytes(), NULL, NULL, NULL);
REPORTER_ASSERT(r, result == SkCodec::kSuccess);
SkMD5::Digest digest;
md5(bm, &digest);
// verify that re-decoding gives the same result.
test_info(r, codec, info, SkCodec::kSuccess, &digest);
{
// Check alpha type conversions
if (info.alphaType() == kOpaque_SkAlphaType) {
test_info(r, codec, info.makeAlphaType(kUnpremul_SkAlphaType),
SkCodec::kInvalidConversion, NULL);
test_info(r, codec, info.makeAlphaType(kPremul_SkAlphaType),
SkCodec::kInvalidConversion, NULL);
} else {
// Decoding to opaque should fail
test_info(r, codec, info.makeAlphaType(kOpaque_SkAlphaType),
SkCodec::kInvalidConversion, NULL);
SkAlphaType otherAt = info.alphaType();
if (kPremul_SkAlphaType == otherAt) {
otherAt = kUnpremul_SkAlphaType;
} else {
otherAt = kPremul_SkAlphaType;
}
// The other non-opaque alpha type should always succeed, but not match.
test_info(r, codec, info.makeAlphaType(otherAt), SkCodec::kSuccess, NULL);
}
}
// Scanline decoding follows.
stream.reset(resource(path));
SkAutoTDelete<SkScanlineDecoder> scanlineDecoder(
SkScanlineDecoder::NewFromStream(stream.detach()));
if (supportsScanlineDecoding) {
bm.eraseColor(SK_ColorYELLOW);
REPORTER_ASSERT(r, scanlineDecoder);
REPORTER_ASSERT(r, scanlineDecoder->start(info) == SkCodec::kSuccess);
for (int y = 0; y < info.height(); y++) {
result = scanlineDecoder->getScanlines(bm.getAddr(0, y), 1, 0);
REPORTER_ASSERT(r, result == SkCodec::kSuccess);
}
// verify that scanline decoding gives the same result.
compare_to_good_digest(r, digest, bm);
} else {
REPORTER_ASSERT(r, !scanlineDecoder);
}
// The rest of this function tests decoding subsets, and will decode an arbitrary number of
// random subsets.
// Do not attempt to decode subsets of an image of only once pixel, since there is no
// meaningful subset.
if (size.width() * size.height() == 1) {
return;
}
SkRandom rand;
SkIRect subset;
SkCodec::Options opts;
opts.fSubset = ⊂
for (int i = 0; i < 5; i++) {
subset = generate_random_subset(&rand, size.width(), size.height());
SkASSERT(!subset.isEmpty());
const bool supported = codec->getValidSubset(&subset);
REPORTER_ASSERT(r, supported == supportsSubsetDecoding);
SkImageInfo subsetInfo = info.makeWH(subset.width(), subset.height());
SkBitmap bm;
bm.allocPixels(subsetInfo);
const SkCodec::Result result = codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes(),
&opts, NULL, NULL);
if (supportsSubsetDecoding) {
REPORTER_ASSERT(r, result == SkCodec::kSuccess);
// Webp is the only codec that supports subsets, and it will have modified the subset
// to have even left/top.
REPORTER_ASSERT(r, SkIsAlign2(subset.fLeft) && SkIsAlign2(subset.fTop));
} else {
// No subsets will work.
REPORTER_ASSERT(r, result == SkCodec::kUnimplemented);
}
}
}
