void AppInit(sleep_state last_sleep_state)
{
/* set all PIOs to inputs and pull them down */
PioSetModes(0xFFFFFFFFUL, pio_mode_user);
PioSetDirs(0xFFFFFFFFUL, FALSE);
PioSetPullModes(0xFFFFFFFFUL, pio_mode_strong_pull_down);
/* Set LED0 and LED1 to be controlled directly via PioSet */
PioSetModes((1UL << PIO_LED0), pio_mode_user);
/* Configure LED0 and LED1 to be outputs */
PioSetDir(PIO_LED0, PIO_DIR_OUTPUT);
/* Set the LED0 and LED1 to have strong internal pull ups */
PioSetPullModes((1UL << PIO_LED0),
pio_mode_strong_pull_up);
/* Configure button to be controlled directly */
PioSetMode(PIR_SIGNAL, pio_mode_user);
/* Configure button to be input */
PioSetDir(PIR_SIGNAL, PIO_DIR_INPUT);
/* Set weak pull up on button PIO, in order not to draw too much current
* while button is pressed
*/
PioSetPullModes((1UL << PIR_SIGNAL), pio_mode_weak_pull_down);
/* Set the button to generate sys_event_pio_changed when pressed as well
* as released
*/
PioSetEventMask((1UL << PIR_SIGNAL), pio_event_mode_rising);
/* disable wake up on UART RX */
SleepWakeOnUartRX(FALSE);
/* pull down the I2C lines */
PioSetI2CPullMode(pio_i2c_pull_mode_strong_pull_down);
/* Reset LED sequence */
restartLedSeq();
SleepModeChange(sleep_mode_deep);
TimerInit(MAX_APP_TIMERS, (void*)app_timers);
BeaconInit();
pirStatusServiceInit();
}
/*----------------------------------------------------------------------------*
* NAME
* InitAlertTagHardware - initialize application hardware
*
* DESCRIPTION
* This function is called upon a power reset to initialize the PIOs
* and configure their initial states.
*
* RETURNS
* Nothing.
*
*----------------------------------------------------------------------------*/
extern void InitAlertTagHardware(void)
{
#ifndef DEBUG_THRU_UART
/* Don't wakeup on UART RX line */
SleepWakeOnUartRX(FALSE);
#endif
/* Setup PIOs
* PIO3 - Buzzer - BUZZER_PIO
* PIO4 - LED 1 - LED_PIO
* PIO11 - Button - BUTTON_PIO
*/
PioSetModes(PIO_BIT_MASK(BUTTON_PIO), pio_mode_user);
PioSetDir(BUTTON_PIO, PIO_DIRECTION_INPUT); /* input */
PioSetPullModes(PIO_BIT_MASK(BUTTON_PIO), pio_mode_strong_pull_up);
/* Setup button on PIO11 */
PioSetEventMask(PIO_BIT_MASK(BUTTON_PIO), pio_event_mode_both);
#ifdef ENABLE_LEDBLINK
/* PWM is being used for LED glowing.*/
PioSetModes(PIO_BIT_MASK(LED_PIO), pio_mode_pwm1);
/* Advertising parameters are being configured for PWM right now. When
* application moves to connection state, we change PWM parameters to
* the ones for connection
*/
PioConfigPWM(LED_PWM_INDEX_1, pio_pwm_mode_push_pull, DULL_LED_ON_TIME_ADV,
DULL_LED_OFF_TIME_ADV, DULL_LED_HOLD_TIME_ADV, BRIGHT_LED_OFF_TIME_ADV,
BRIGHT_LED_ON_TIME_ADV, BRIGHT_LED_HOLD_TIME_ADV, LED_RAMP_RATE);
PioEnablePWM(LED_PWM_INDEX_1, FALSE);
#endif /* ENABLE_LEDBLINK */
#ifdef ENABLE_BUZZER
PioSetModes(PIO_BIT_MASK(BUZZER_PIO), pio_mode_pwm0);
/* Configure the buzzer on PIO3 */
PioConfigPWM(BUZZER_PWM_INDEX_0, pio_pwm_mode_push_pull, DULL_BUZZ_ON_TIME,
DULL_BUZZ_OFF_TIME, DULL_BUZZ_HOLD_TIME, BRIGHT_BUZZ_ON_TIME,
BRIGHT_BUZZ_OFF_TIME, BRIGHT_BUZZ_HOLD_TIME, BUZZ_RAMP_RATE);
PioEnablePWM(BUZZER_PWM_INDEX_0, FALSE);
#endif /* ENABLE_BUZZER */
/* Set the I2C pins to pull down */
PioSetI2CPullMode(pio_i2c_pull_mode_strong_pull_down);
}
void AppInit(sleep_state last_sleep_state)
{
/* set all PIOs to inputs and pull them down */
PioSetModes(0xFFFFFFFFUL, pio_mode_user);
PioSetDirs(0xFFFFFFFFUL, FALSE);
PioSetPullModes(0xFFFFFFFFUL, pio_mode_strong_pull_down);
/* disable wake up on UART RX */
SleepWakeOnUartRX(FALSE);
/* pull down the I2C lines */
PioSetI2CPullMode(pio_i2c_pull_mode_strong_pull_down);
/* Start advertising */
startAdvertising();
}
