/**
* @brief The BIOS main() entry point.
*
* @remark The purpose of this function is to create a BIOS worker task
* to house our example.
*
* @remark This is called during BIOS_init, but before the scheduler
* has begun running.
*/
Int main(Int argc, String argv[])
{
TSK_Attrs attrs = TSK_ATTRS;
attrs.stacksize = 6 * 1024;
attrs.name = taskName;
/* init Codec Engine */
CERuntime_init();
/* init trace */
GT_init();
/* create a mask to allow a trace-print welcome message below */
GT_create(&curMask, MOD_NAME);
/* Enable all trace for this module */
GT_set(MOD_NAME "=01234567");
GT_0trace(curMask, GT_2CLASS, "main> " MOD_NAME "\n");
if (TSK_create((Fxn)smain, &attrs, argc, argv) == NULL) {
SYS_abort("main: failed to create smain thread.");
}
return (0);
}
/* ARGSUSED */
Int smain(Int argc, Char * argv[])
{
TSK_Handle tsk;
TSK_Attrs attrs = TSK_ATTRS;
Int i;
GT_0trace(ti_sdo_fc_rman_examples_hdvicp, GT_ENTER, "_smain> Enter \n");
done = SEM_create(0, NULL);
mutex = SEM_create(1, NULL);
if ((done == NULL) || (mutex == NULL)) {
SYS_abort("Sem create failed \n");
}
/*
* Do I care about this ?
*/
attrs.stackseg = EXTMEM_HEAP;
/*
* Use a bigger stack size when printing out trace
*/
attrs.stacksize = 0x1000;
for (i = 0; i < NUMTASKS; i++) {
attrs.priority = attrsTable[i].priority;
tsk = TSK_create((Fxn)rmanTask, &attrs,
(Arg)(attrsTable[i].scratchId),
(Arg)(&(attrsTable[i].id)),
(Arg)(attrsTable[i].priority),
(Arg)(i +1),
(Arg)(attrsTable[i].yieldFlag));
if (tsk == NULL) {
GT_1trace(ti_sdo_fc_rman_examples_hdvicp, GT_7CLASS, "_rman> "
"Task #%d create failed \n",i);
SYS_abort("TSK_create() of task %d failed\n",i+1);
}
}
for (i=0; i < NUMTASKS; i++) {
SEM_pend(done, SYS_FOREVER);
}
GT_0trace(ti_sdo_fc_rman_examples_hdvicp, GT_4CLASS, "_smain> "
"TEST PASSED \n");
SEM_delete(mutex);
SEM_delete(done);
GT_0trace(ti_sdo_fc_rman_examples_hdvicp, GT_ENTER, "_smain> Exit \n");
return 0;
}
Void main(Int argc, Char *argv[])
{
// create the semaphore
dprint_sema = SEM_create (0, NULL);
// connect with gpp:
DSPLINK_init ();
// register callback from the gpp side:
NOTIFY_register (ID_GPP, 0, 6, dprint_callback, 0);
// start task:
TSK_create(TaskMain, NULL, &0);
// task will start as soon as main ends!
// don't call dprintf from here!
}
/** ============================================================================
* @func main
*
* @desc Entry function.
*
* @modif None
* ============================================================================
*/
Void main(Int argc, Char* argv [])
{
/* Task handler for TSK_create */
TSK_Handle tskMessageTask;
#if !defined (DSP_BOOTMODE_NOBOOT)
/* Get the number of transfers to be done by the application */
numTransfers = atoi(argv [0]);
/* Initialize DSP/BIOS LINK. */
DSPLINK_init();
#endif
/* Creating task for TSKMESSAGE application */
tskMessageTask = TSK_create(tskMessage, NULL, 0);
if (tskMessageTask == NULL)
{
SET_FAILURE_REASON(SYS_EALLOC);
LOG_printf(&trace, "Create TSKMESSAGE: Failed.\n");
}
}
/** ============================================================================
* @func main
*
* @desc Entry function.
*
* @modif None
* ============================================================================
*/
Void main(Int argc, Char *argv[])
{
#if defined (SWI_MODE)
/* SWI based loopback */
SWILOOP_TransferInfo * info;
#else /* if defined (SWI_MODE) */
/* TSK based loopback */
TSK_Handle tskLoopTask;
#endif /* if defined (SWI_MODE) */
#if defined (SWI_MODE) || defined (CHNL_PCPY_LINK)
Int status ;
#endif /* if defined (SWI_MODE) || defined (CHNL_PCPY_LINK) */
#if defined (DSP_BOOTMODE_NOBOOT)
/* register the init ISR */
HAL_intRegister (DSPLINK_INT_ID,
DSPLINK_INT_VEC_ID,
(Fxn) &HAL_initIsr,
0) ;
#endif
#if !defined (DSP_BOOTMODE_NOBOOT)
/* Initialize DSP/BIOS LINK. */
DSPLINK_init () ;
/* Get the number of transfers to be done by the application */
numTransfers = atoi (argv[1]) ;
/* Transfer size for loopback given by GPP side */
xferBufSize = DSPLINK_ALIGN ((atoi (argv[0]) / DSP_MAUSIZE),
DSPLINK_BUF_ALIGN) ;
#else
/* Get the number of transfers to be done by the application */
numTransfers = 10000 ;
/* Transfer size for loopback given by GPP side */
xferBufSize = 1024 ;
#endif
#if defined (SWI_MODE)
/* Create phase of SWILOOP application */
status = SWILOOP_create(&info);
if (status == SYS_OK) {
/* Execute phase of SWILOOP application */
status = SWILOOP_execute(info);
if (status != SYS_OK) {
SET_FAILURE_REASON (status);
}
}
else {
SET_FAILURE_REASON (status);
}
/* Delete phase of SWILOOP application: This is not called right now
* because SWI application runs forever
*/
/*
deleteStatus = SWILOOP_delete(info);
if (deleteStatus != SYS_OK) {
SET_FAILURE_REASON (deleteStatus);
}
*/
#else /* if defined (SWI_MODE) */
/* Creating task for TSKLOOP application */
tskLoopTask = TSK_create(tskLoop, NULL, 0);
if (tskLoopTask != NULL) {
LOG_printf(&trace, "Create TSKLOOP: Success\n");
}
else {
LOG_printf(&trace, "Create TSKLOOP: Failed.\n");
return;
}
#endif /* if defined (SWI_MODE) */
return;
}
/** ============================================================================
* @func main
*
* @desc Entry function.
*
* @modif None
* ============================================================================
*/
Void main(Int argc, Char *argv[]) {
/* TSK based ring_io application */
TSK_Handle tskRingIoTask1; //for sending
TSK_Handle tskRingIoTask2; // for receiving
TSK_Attrs attrs = TSK_ATTRS;
#if defined (DSP_BOOTMODE_NOBOOT)
/* register the init ISR */
HAL_intRegister (DSPLINK_INT_ID,
DSPLINK_INT_VEC_ID,
(Fxn) &HAL_initIsr,
0);
#endif
#if !defined (DSP_BOOTMODE_NOBOOT)
/* Initialize DSP/BIOS LINK. */
DSPLINK_init();
/* Get the size of the data buffer to be allocated for the RingIO. */
RING_IO_dataBufSize1 = atoi(argv[0]);
RING_IO_dataBufSize2 = atoi(argv[1]);
/* Get the size of the attribute buffer to be allocated for the RingIO.*/
RING_IO_attrBufSize = atoi(argv[2]);
/* Get the size of the footbuffer to be allocated for the RingIO. */
RING_IO_footBufSize = atoi(argv[3]);
#else
/* Get the size of the data buffer to be allocated for the RingIO. */
RING_IO_dataBufSize1 = 10240;
RING_IO_dataBufSize2 = 10240;
/* Get the size of the attribute buffer to be allocated for the RingIO.*/
RING_IO_attrBufSize = 2048;
/* Get the size of the footbuffer to be allocated for the RingIO. */
RING_IO_footBufSize = 0;
#endif
/* Create Phase */
TSKRING_IO_create1(&info1);
/* Create Phase */
TSKRING_IO_create2(&info2);
attrs.stacksize = 16384;
/* Creating task for RING_IO application */
//tskRingIoTask1 = TSK_create(tskRingIo1, NULL, 0);
tskRingIoTask1 = TSK_create(tskRingIo1, &attrs, 0);
if (tskRingIoTask1 != NULL) {
LOG_printf(&trace, "Create RING_IO TSK1: Success\n");
} else {
LOG_printf(&trace, "Create RING_IO TSK1: Failed.\n");
}
/* Creating task for RING_IO application */
//tskRingIoTask2 = TSK_create(tskRingIo2, NULL, 0);
tskRingIoTask2 = TSK_create(tskRingIo2, &attrs, 0);
if (tskRingIoTask2 != NULL) {
LOG_printf(&trace, "Create RING_IO TSK2: Success\n");
} else {
LOG_printf(&trace, "Create RING_IO TSK2: Failed.\n");
}
}
