execprg(f, n)
{
register int s;
char line[NLINE];
/* don't allow this command if restricted */
if (restflag)
return(resterr());
if ((s=mlreply("!", line, NLINE)) != TRUE)
return(s);
TTputc('\n'); /* Already have '\r' */
TTflush();
TTclose(); /* stty to old modes */
system(line);
TTopen();
mlputs(TEXT188); /* Pause. */
/* "[End]" */
TTflush();
while ((s = tgetc()) != '\r' && s != ' ')
;
sgarbf = TRUE;
return(TRUE);
}
/*
* Create a subjob with a copy of the command intrepreter in it. When the
* command interpreter exits, mark the screen as garbage so that you do a full
* repaint. Bound to "^X C". The message at the start in VMS puts out a newline.
* Under some (unknown) condition, you don't get one free when DCL starts up.
*/
spawncli(f, n)
{
register char *cp;
char *getenv();
/* don't allow this command if restricted */
if (restflag)
return(resterr());
movecursor(term.t_nrow, 0); /* Seek to last line. */
TTflush();
TTclose(); /* stty to old settings */
if ((cp = getenv("SHELL")) != NULL && *cp != '\0')
system(cp);
else
#if BSD | SUN
system("exec /bin/csh");
#else
system("exec /bin/sh");
#endif
sgarbf = TRUE;
sleep(2);
TTopen();
return(TRUE);
}
/*
* Run a one-liner in a subjob. When the command returns, wait for a single
* character to be typed, then mark the screen as garbage so a full repaint is
* done. Bound to "C-X !".
*/
spawn(f, n)
{
register int s;
char line[NLINE];
/* don't allow this command if restricted */
if (restflag)
return(resterr());
if ((s=mlreply("!", line, NLINE)) != TRUE)
return(s);
TTputc('\n'); /* Already have '\r' */
TTflush();
TTclose(); /* stty to old modes */
system(line);
TTopen();
TTflush();
/* if we are interactive, pause here */
if (clexec == FALSE) {
mlputs(TEXT6);
/* "\r\n\n[End]" */
tgetc();
}
sgarbf = TRUE;
return(TRUE);
}
int execprg(int f, int n)
{
#ifndef WINNT
int s;
char line[NLINE];
#endif
/* don't allow this command if restricted */
if (restflag)
return resterr();
#if WINNT
mlwrite("(unsupported)");
return FALSE;
#endif
#if VMS
if ((s = mlreply("!", line, NLINE)) != TRUE)
return s;
TTflush();
s = sys(line); /* Run the command. */
mlputs("\r\n\n(End)"); /* Pause. */
TTflush();
tgetc();
sgarbf = TRUE;
return s;
#endif
#if MSDOS
if ((s = mlreply("$", line, NLINE)) != TRUE)
return s;
movecursor(term.t_nrow, 0);
TTkclose();
execprog(line);
TTkopen();
/* if we are interactive, pause here */
if (clexec == FALSE) {
mlputs("\r\n(End)");
tgetc();
}
sgarbf = TRUE;
return TRUE;
#endif
#if V7 | USG | BSD
if ((s = mlreply("!", line, NLINE)) != TRUE)
return s;
TTputc('\n'); /* Already have '\r' */
TTflush();
TTclose(); /* stty to old modes */
TTkclose();
system(line);
fflush(stdout); /* to be sure P.K. */
TTopen();
mlputs("(End)"); /* Pause. */
TTflush();
while ((s = tgetc()) != '\r' && s != ' ');
sgarbf = TRUE;
return TRUE;
#endif
}
void vttidy()
{
mlerase();
movecursor(term.t_nrow, 0);
TTflush();
TTclose();
TTkclose();
}
/*
* Clean up the virtual terminal system, in anticipation for a return to the
* operating system. Move down to the last line and clear it out (the next
* system prompt will be written in the line). Shut down the channel to the
* terminal.
*/
void vttidy(void)
{
mlerase();
movecursor(term.t_nrow, 0);
TTflush();
TTclose();
TTkclose();
#ifdef PKCODE
write(1, "\r", 1);
#endif
}
// Clean up the virtual terminal system, in anticipation for a return to the operating system. Move down to the last line and
// clear it out (the next system prompt will be written in the line). Shut down the channel to the terminal. Return status.
int vttidy(bool force) {
// Don't close it if it ain't open.
if(opflags & OPVTOPEN) {
mlerase(MLFORCE);
if((TTflush() == SUCCESS || force) && (TTclose() == SUCCESS || force))
(void) TTkclose();
opflags &= ~OPVTOPEN;
}
return rc.status;
}
/* the #ifdefs have been totally separated, for readability */
static int
spawn1(int rerun, int pressret)
{
#if DISP_IBMPC
int closed;
#endif
#if COMMON_SH_PROMPT
register int s;
char line[NLINE]; /* command line send to shell */
if ((s = ShellPrompt(&save_shell[0], line, rerun)) != TRUE)
return s;
#endif /* COMMON_SH_PROMPT */
/* take care of autowrite */
if (writeall(FALSE,1,FALSE,TRUE,TRUE) != TRUE)
return FALSE;
#if SYS_UNIX
#if DISP_X11
(void)system_SHELL(line);
#else
ttclean(TRUE);
(void)system_SHELL(line);
TTflush();
ttunclean();
if (pressret)
pressreturn();
TTopen();
TTkopen();
TTflush();
sgarbf = TRUE;
#endif /* DISP_X11 */
return AfterShell();
#endif /* SYS_UNIX */
#if SYS_VMS
TTputc('\n'); /* Already have '\r' */
TTflush();
s = sys(line); /* Run the command. */
mlforce("\r\n\n[End]"); /* Pause. */
TTflush();
(void)keystroke();
sgarbf = TRUE;
return (s);
#endif
#if SYS_WIN31
mlforce("[Not in Windows 3.1]");
return FALSE;
#endif
#if SYS_MSDOS || SYS_OS2 || SYS_WINNT
bottomleft();
TTputc('\n');
TTflush();
TTkclose();
#if DISP_IBMPC
/* If we don't reset to 80x25, parts of the shell-output will go
* astray.
*/
closed = term.t_ncol != 80 || term.t_nrow != 25;
if (closed)
TTclose();
#endif
system(line);
TTkopen();
/* if we are interactive, pause here */
if (pressret) {
pressreturn();
}
#if DISP_IBMPC
/* Reopen the display _after_ the prompt, to keep the shell-output
* in the same type of screen as the prompt.
*/
if (closed)
TTopen();
#endif
sgarbf = TRUE;
return AfterShell();
#endif
}
/*
* This is the general command execution routine. It handles the fake binding
* of all the keys to "self-insert". It also clears out the "thisflag" word,
* and arranges to move it to the "lastflag", so that the next command can
* look at it. Return the status of command.
*/
int execute(int c, int f, int n)
{
int status;
fn_t execfunc;
/* if the keystroke is a bound function...do it */
execfunc = getbind(c);
if (execfunc != NULL) {
thisflag = 0;
status = (*execfunc) (f, n);
lastflag = thisflag;
return status;
}
/*
* If a space was typed, fill column is defined, the argument is non-
* negative, wrap mode is enabled, and we are now past fill column,
* and we are not read-only, perform word wrap.
*/
if (c == ' ' && (curwp->w_bufp->b_mode & MDWRAP) && fillcol > 0 &&
n >= 0 && getccol(FALSE) > fillcol &&
(curwp->w_bufp->b_mode & MDVIEW) == FALSE)
execute(META | SPEC | 'W', FALSE, 1);
#if PKCODE
if ((c >= 0x20 && c <= 0x7E) /* Self inserting. */
#if IBMPC
|| (c >= 0x80 && c <= 0xFE)) {
#else
#if VMS || BSD || USG /* 8BIT P.K. */
|| (c >= 0xA0 && c <= 0xFFFF)) {
#else
) {
#endif
#endif
#else
if ((c >= 0x20 && c <= 0xFF)) { /* Self inserting. */
#endif
if (n <= 0) { /* Fenceposts. */
lastflag = 0;
return n < 0 ? FALSE : TRUE;
}
thisflag = 0; /* For the future. */
/* if we are in overwrite mode, not at eol,
and next char is not a tab or we are at a tab stop,
delete a char forword */
if (curwp->w_bufp->b_mode & MDOVER &&
curwp->w_doto < curwp->w_dotp->l_used &&
(lgetc(curwp->w_dotp, curwp->w_doto) != '\t' ||
(curwp->w_doto) % 8 == 7))
ldelchar(1, FALSE);
/* do the appropriate insertion */
if (c == '}' && (curbp->b_mode & MDCMOD) != 0)
status = insbrace(n, c);
else if (c == '#' && (curbp->b_mode & MDCMOD) != 0)
status = inspound();
else
status = linsert(n, c);
#if CFENCE
/* check for CMODE fence matching */
if ((c == '}' || c == ')' || c == ']') &&
(curbp->b_mode & MDCMOD) != 0)
fmatch(c);
#endif
/* check auto-save mode */
if (curbp->b_mode & MDASAVE)
if (--gacount == 0) {
/* and save the file if needed */
upscreen(FALSE, 0);
filesave(FALSE, 0);
gacount = gasave;
}
lastflag = thisflag;
return status;
}
TTbeep();
mlwrite("(Key not bound)"); /* complain */
lastflag = 0; /* Fake last flags. */
return FALSE;
}
/*
* Fancy quit command, as implemented by Norm. If the any buffer has
* changed do a write on that buffer and exit emacs, otherwise simply exit.
*/
int quickexit(int f, int n)
{
struct buffer *bp; /* scanning pointer to buffers */
struct buffer *oldcb; /* original current buffer */
int status;
oldcb = curbp; /* save in case we fail */
bp = bheadp;
while (bp != NULL) {
if ((bp->b_flag & BFCHG) != 0 /* Changed. */
&& (bp->b_flag & BFTRUNC) == 0 /* Not truncated P.K. */
&& (bp->b_flag & BFINVS) == 0) { /* Real. */
curbp = bp; /* make that buffer cur */
mlwrite("(Saving %s)", bp->b_fname);
#if PKCODE
#else
mlwrite("\n");
#endif
if ((status = filesave(f, n)) != TRUE) {
curbp = oldcb; /* restore curbp */
return status;
}
}
bp = bp->b_bufp; /* on to the next buffer */
}
quit(f, n); /* conditionally quit */
return TRUE;
}
static void emergencyexit(int signr)
{
quickexit(FALSE, 0);
quit(TRUE, 0);
}
/*
* Quit command. If an argument, always quit. Otherwise confirm if a buffer
* has been changed and not written out. Normally bound to "C-X C-C".
*/
int quit(int f, int n)
{
int s;
if (f != FALSE /* Argument forces it. */
|| anycb() == FALSE /* All buffers clean. */
/* User says it's OK. */
|| (s =
mlyesno("Modified buffers exist. Leave anyway")) == TRUE) {
#if (FILOCK && BSD) || SVR4
if (lockrel() != TRUE) {
TTputc('\n');
TTputc('\r');
TTclose();
TTkclose();
exit(1);
}
#endif
vttidy();
if (f)
exit(n);
else
exit(GOOD);
}
mlwrite("");
return s;
}
/*
* Begin a keyboard macro.
* Error if not at the top level in keyboard processing. Set up variables and
* return.
*/
int ctlxlp(int f, int n)
{
if (kbdmode != STOP) {
mlwrite("%%Macro already active");
return FALSE;
}
mlwrite("(Start macro)");
kbdptr = &kbdm[0];
kbdend = kbdptr;
kbdmode = RECORD;
return TRUE;
}
/*
* End keyboard macro. Check for the same limit conditions as the above
* routine. Set up the variables and return to the caller.
*/
int ctlxrp(int f, int n)
{
if (kbdmode == STOP) {
mlwrite("%%Macro not active");
return FALSE;
}
if (kbdmode == RECORD) {
mlwrite("(End macro)");
kbdmode = STOP;
}
return TRUE;
}
/*
* Execute a macro.
* The command argument is the number of times to loop. Quit as soon as a
* command gets an error. Return TRUE if all ok, else FALSE.
*/
int ctlxe(int f, int n)
{
if (kbdmode != STOP) {
mlwrite("%%Macro already active");
return FALSE;
}
if (n <= 0)
return TRUE;
kbdrep = n; /* remember how many times to execute */
kbdmode = PLAY; /* start us in play mode */
kbdptr = &kbdm[0]; /* at the beginning */
return TRUE;
}
/*
* Abort.
* Beep the beeper. Kill off any keyboard macro, etc., that is in progress.
* Sometimes called as a routine, to do general aborting of stuff.
*/
int ctrlg(int f, int n)
{
TTbeep();
kbdmode = STOP;
mlwrite("(Aborted)");
return ABORT;
}
/*
* Pipe a one line command into a window
* Bound to ^X @
*/
pipecmd(f, n)
{
register int s; /* return status from CLI */
register WINDOW *wp; /* pointer to new window */
register BUFFER *bp; /* pointer to buffer to zot */
char line[NLINE]; /* command line send to shell */
static char bname[] = "command";
static char filnam[NFILEN] = "command";
/* don't allow this command if restricted */
if (restflag)
return(resterr());
/* get the command to pipe in */
if ((s=mlreply("@", line, NLINE)) != TRUE)
return(s);
/* get rid of the command output buffer if it exists */
if ((bp=bfind(bname, FALSE, 0)) != FALSE) {
/* try to make sure we are off screen */
wp = wheadp;
while (wp != NULL) {
if (wp->w_bufp == bp) {
onlywind(FALSE, 1);
break;
}
wp = wp->w_wndp;
}
if (zotbuf(bp) != TRUE)
return(FALSE);
}
TTputc('\n'); /* Already have '\r' */
TTflush();
TTclose(); /* stty to old modes */
strcat(line,">");
strcat(line,filnam);
system(line);
TTopen();
TTflush();
sgarbf = TRUE;
s = TRUE;
if (s != TRUE)
return(s);
/* split the current window to make room for the command output */
if (splitwind(FALSE, 1) == FALSE)
return(FALSE);
/* and read the stuff in */
if (getfile(filnam, FALSE) == FALSE)
return(FALSE);
/* make this window in VIEW mode, update all mode lines */
curwp->w_bufp->b_mode |= MDVIEW;
wp = wheadp;
while (wp != NULL) {
wp->w_flag |= WFMODE;
wp = wp->w_wndp;
}
/* and get rid of the temporary file */
unlink(filnam);
return(TRUE);
}
/*
* Create a subjob with a copy of the command intrepreter in it. When the
* command interpreter exits, mark the screen as garbage so that you do a full
* repaint. Bound to "^X C". The message at the start in VMS puts out a newline.
* Under some (unknown) condition, you don't get one free when DCL starts up.
*/
int spawncli(int f, int n)
{
#if V7 | USG | BSD
char *cp;
#endif
/* don't allow this command if restricted */
if (restflag)
return resterr();
#if WINNT
mlwrite("(unsupported)");
return FALSE;
#endif
#if VMS
movecursor(term.t_nrow, 0); /* In last line. */
mlputs("(Starting DCL)\r\n");
TTflush(); /* Ignore "ttcol". */
sgarbf = TRUE;
sys(NULL);
sleep(1);
mlputs("\r\n(Returning from DCL)\r\n");
TTflush();
sleep(1);
return TRUE;
#endif
#if MSDOS & (MSC | TURBO)
movecursor(term.t_nrow, 0); /* Seek to last line. */
TTflush();
TTkclose();
shellprog("");
TTkopen();
sgarbf = TRUE;
return TRUE;
#endif
#if V7 | USG | BSD
movecursor(term.t_nrow, 0); /* Seek to last line. */
TTflush();
TTclose(); /* stty to old settings */
TTkclose(); /* Close "keyboard" */
if ((cp = getenv("SHELL")) != NULL && *cp != '\0')
system(cp);
else
#if BSD
system("exec /bin/csh");
#else
system("exec /bin/sh");
#endif
sgarbf = TRUE;
sleep(2);
TTopen();
TTkopen();
#ifdef SIGWINCH
/*
* This fools the update routines to force a full
* redraw with complete window size checking.
* -lbt
*/
chg_width = term.t_ncol;
chg_height = term.t_nrow + 1;
term.t_nrow = term.t_ncol = 0;
#endif
return TRUE;
#endif
}
/*
* filter a buffer through an external DOS program
* Bound to ^X #
*/
int filter_buffer(int f, int n)
{
int s; /* return status from CLI */
struct buffer *bp; /* pointer to buffer to zot */
char line[NLINE]; /* command line send to shell */
char tmpnam[NFILEN]; /* place to store real file name */
static char bname1[] = "fltinp";
static char filnam1[] = "fltinp";
static char filnam2[] = "fltout";
/* don't allow this command if restricted */
if (restflag)
return resterr();
if (curbp->b_mode & MDVIEW) /* don't allow this command if */
return rdonly(); /* we are in read only mode */
#if VMS
mlwrite("Not available under VMS");
return FALSE;
#endif
/* get the filter name and its args */
if ((s = mlreply("#", line, NLINE)) != TRUE)
return s;
/* setup the proper file names */
bp = curbp;
xstrcpy(tmpnam, bp->b_fname); /* save the original name */
xstrcpy(bp->b_fname, bname1); /* set it to our new one */
/* write it out, checking for errors */
if (writeout(filnam1) != TRUE) {
mlwrite("(Cannot write filter file)");
xstrcpy(bp->b_fname, tmpnam);
return FALSE;
}
#if MSDOS
strcat(line, " <fltinp >fltout");
movecursor(term.t_nrow - 1, 0);
TTkclose();
shellprog(line);
TTkopen();
sgarbf = TRUE;
s = TRUE;
#endif
#if V7 | USG | BSD
TTputc('\n'); /* Already have '\r' */
TTflush();
TTclose(); /* stty to old modes */
TTkclose();
strcat(line, " <fltinp >fltout");
system(line);
TTopen();
TTkopen();
TTflush();
sgarbf = TRUE;
s = TRUE;
#endif
/* on failure, escape gracefully */
if (s != TRUE || (readin(filnam2, FALSE) == FALSE)) {
mlwrite("(Execution failed)");
xstrcpy(bp->b_fname, tmpnam);
unlink(filnam1);
unlink(filnam2);
return s;
}
/* reset file name */
xstrcpy(bp->b_fname, tmpnam); /* restore name */
bp->b_flag |= BFCHG; /* flag it as changed */
/* and get rid of the temporary file */
unlink(filnam1);
unlink(filnam2);
return TRUE;
}
/*
* Pipe a one line command into a window
* Bound to ^X @
*/
int pipecmd(int f, int n)
{
int s; /* return status from CLI */
struct window *wp; /* pointer to new window */
struct buffer *bp; /* pointer to buffer to zot */
char line[NLINE]; /* command line send to shell */
static char bname[] = "command";
static char filnam[NSTRING] = "command";
#if MSDOS
char *tmp;
FILE *fp;
int len;
#endif
/* don't allow this command if restricted */
if (restflag)
return resterr();
#if MSDOS
if ((tmp = getenv("TMP")) == NULL
&& (tmp = getenv("TEMP")) == NULL)
xstrcpy(filnam, "command");
else {
xstrcpy(filnam, tmp);
len = strlen(tmp);
if (len <= 0 || filnam[len - 1] != '\\'
&& filnam[len - 1] != '/')
strcat(filnam, "\\");
strcat(filnam, "command");
}
#endif
#if VMS
mlwrite("Not available under VMS");
return FALSE;
#endif
/* get the command to pipe in */
if ((s = mlreply("@", line, NLINE)) != TRUE)
return s;
/* get rid of the command output buffer if it exists */
if ((bp = bfind(bname, FALSE, 0)) != FALSE) {
/* try to make sure we are off screen */
wp = wheadp;
while (wp != NULL) {
if (wp->w_bufp == bp) {
#if PKCODE
if (wp == curwp)
delwind(FALSE, 1);
else
onlywind(FALSE, 1);
break;
#else
onlywind(FALSE, 1);
break;
#endif
}
wp = wp->w_wndp;
}
if (zotbuf(bp) != TRUE)
return FALSE;
}
#if MSDOS
strcat(line, " >>");
strcat(line, filnam);
movecursor(term.t_nrow, 0);
TTkclose();
shellprog(line);
TTkopen();
sgarbf = TRUE;
if ((fp = fopen(filnam, "r")) == NULL) {
s = FALSE;
} else {
fclose(fp);
s = TRUE;
}
#endif
#if V7 | USG | BSD
TTflush();
TTclose(); /* stty to old modes */
TTkclose();
strcat(line, ">");
strcat(line, filnam);
system(line);
TTopen();
TTkopen();
TTflush();
sgarbf = TRUE;
s = TRUE;
#endif
if (s != TRUE)
return s;
/* split the current window to make room for the command output */
if (splitwind(FALSE, 1) == FALSE)
return FALSE;
/* and read the stuff in */
if (getfile(filnam, FALSE) == FALSE)
return FALSE;
/* make this window in VIEW mode, update all mode lines */
curwp->w_bufp->b_mode |= MDVIEW;
wp = wheadp;
while (wp != NULL) {
wp->w_flag |= WFMODE;
wp = wp->w_wndp;
}
/* and get rid of the temporary file */
unlink(filnam);
return TRUE;
}
