/**
*
* This function is the interrupt handler for the XIic driver. This function
* should be connected to the interrupt system.
*
* Only one interrupt source is handled for each interrupt allowing
* higher priority system interrupts quicker response time.
*
* @param InstancePtr is a pointer to the XIic instance to be worked on.
*
* @return None.
*
* @internal
*
* The XIIC_INTR_ARB_LOST_MASK and XIIC_INTR_TX_ERROR_MASK interrupts must have
* higher priority than the other device interrupts so that the IIC device does
* not get into a potentially confused state. The remaining interrupts may be
* rearranged with no harm.
*
******************************************************************************/
void XIic_InterruptHandler(void *InstancePtr)
{
u32 Status;
u32 IntrStatus;
u32 IntrPending;
u32 IntrEnable;
XIic *IicPtr = NULL;
u32 Clear = 0;
/*
* Verify that each of the inputs are valid.
*/
Xil_AssertVoid(InstancePtr != NULL);
/*
* Convert the non-typed pointer to an IIC instance pointer
*/
IicPtr = (XIic *) InstancePtr;
/*
* Get the interrupt Status.
*/
IntrPending = XIic_ReadIisr(IicPtr->BaseAddress);
IntrEnable = XIic_ReadIier(IicPtr->BaseAddress);
IntrStatus = IntrPending & IntrEnable;
/*
* Do not processes a devices interrupts if the device has no
* interrupts pending or the global interrupts have been disabled.
*/
if ((IntrStatus == 0) ||
(XIic_IsIntrGlobalEnabled(IicPtr->BaseAddress) == FALSE)) {
return;
}
/*
* Update interrupt stats and get the contents of the status register.
*/
IicPtr->Stats.IicInterrupts++;
Status = XIic_ReadReg(IicPtr->BaseAddress, XIIC_SR_REG_OFFSET);
/*
* Service requesting interrupt.
*/
if (IntrStatus & XIIC_INTR_ARB_LOST_MASK) {
/* Bus Arbritration Lost */
IicPtr->Stats.ArbitrationLost++;
XIic_ArbLostFuncPtr(IicPtr);
Clear = XIIC_INTR_ARB_LOST_MASK;
} else if (IntrStatus & XIIC_INTR_TX_ERROR_MASK) {
/* Transmit errors (no acknowledge) received */
IicPtr->Stats.TxErrors++;
TxErrorHandler(IicPtr);
Clear = XIIC_INTR_TX_ERROR_MASK;
} else if (IntrStatus & XIIC_INTR_NAAS_MASK) {
/* Not Addressed As Slave */
XIic_NotAddrAsSlaveFuncPtr(IicPtr);
Clear = XIIC_INTR_NAAS_MASK;
} else if (IntrStatus & XIIC_INTR_RX_FULL_MASK) {
/* Receive register/FIFO is full */
IicPtr->Stats.RecvInterrupts++;
if (Status & XIIC_SR_ADDR_AS_SLAVE_MASK) {
XIic_RecvSlaveFuncPtr(IicPtr);
} else {
XIic_RecvMasterFuncPtr(IicPtr);
}
Clear = XIIC_INTR_RX_FULL_MASK;
} else if (IntrStatus & XIIC_INTR_AAS_MASK) {
/* Addressed As Slave */
XIic_AddrAsSlaveFuncPtr(IicPtr);
Clear = XIIC_INTR_AAS_MASK;
} else if (IntrStatus & XIIC_INTR_BNB_MASK) {
/* IIC bus has transitioned to not busy */
/* Check if send callback needs to run */
if (IicPtr->BNBOnly == TRUE) {
XIic_BusNotBusyFuncPtr(IicPtr);
IicPtr->BNBOnly = FALSE;
} else {
IicPtr->SendHandler(IicPtr->SendCallBackRef, 0);
}
Clear = XIIC_INTR_BNB_MASK;
/* The bus is not busy, disable BusNotBusy interrupt */
XIic_DisableIntr(IicPtr->BaseAddress, XIIC_INTR_BNB_MASK);
} else if ((IntrStatus & XIIC_INTR_TX_EMPTY_MASK) ||
(IntrStatus & XIIC_INTR_TX_HALF_MASK)) {
/* Transmit register/FIFO is empty or � empty */
IicPtr->Stats.SendInterrupts++;
if (Status & XIIC_SR_ADDR_AS_SLAVE_MASK) {
XIic_SendSlaveFuncPtr(IicPtr);
} else {
XIic_SendMasterFuncPtr(IicPtr);
}
IntrStatus = XIic_ReadIisr(IicPtr->BaseAddress);
Clear = IntrStatus & (XIIC_INTR_TX_EMPTY_MASK |
XIIC_INTR_TX_HALF_MASK);
}
/*
* Clear Interrupts.
*/
XIic_WriteIisr(IicPtr->BaseAddress, Clear);
}
/**
*
* This function is the interrupt handler for the XIic driver. This function
* should be connected to the interrupt system.
*
* Only one interrupt source is handled for each interrupt allowing
* higher priority system interrupts quicker response time.
*
* @param InstancePtr is a pointer to the XIic instance to be worked on.
*
* @return
*
* None.
*
* @internal
*
* The XIIC_INTR_ARB_LOST_MASK and XIIC_INTR_TX_ERROR_MASK interrupts must have
* higher priority than the other device interrupts so that the IIC device does
* not get into a potentially confused state. The remaining interrupts may be
* rearranged with no harm.
*
* All XIic device interrupts are ORed into one device interrupt. This routine
* reads the pending interrupts via the IpIf interface and masks that with the
* interrupt mask to evaluate only the interrupts enabled.
*
******************************************************************************/
void XIic_InterruptHandler(void *InstancePtr)
{
u8 Status;
u32 IntrStatus;
u32 IntrPending;
u32 IntrEnable;
XIic *IicPtr = NULL;
u32 Clear = 0;
/*
* Verify that each of the inputs are valid.
*/
XASSERT_VOID(InstancePtr != NULL);
/*
* Convert the non-typed pointer to an IIC instance pointer
*/
IicPtr = (XIic *) InstancePtr;
/* Get the interrupt Status from the IPIF. There is no clearing of
* interrupts in the IPIF. Interrupts must be cleared at the source.
* To find which interrupts are pending; AND interrupts pending with
* interrupts masked.
*/
IntrPending = XIIC_READ_IISR(IicPtr->BaseAddress);
IntrEnable = XIIC_READ_IIER(IicPtr->BaseAddress);
IntrStatus = IntrPending & IntrEnable;
/* Do not processes a devices interrupts if the device has no
* interrupts pending or the global interrupts have been disabled
*/
if ((IntrStatus == 0) |
(XIIC_IS_GINTR_ENABLED(IicPtr->BaseAddress) == FALSE)) {
return;
}
/* Update interrupt stats and get the contents of the status register
*/
IicPtr->Stats.IicInterrupts++;
Status = XIo_In8(IicPtr->BaseAddress + XIIC_SR_REG_OFFSET);
/* Service requesting interrupt
*/
if (IntrStatus & XIIC_INTR_ARB_LOST_MASK) {
/* Bus Arbritration Lost */
IicPtr->Stats.ArbitrationLost++;
XIic_ArbLostFuncPtr(IicPtr);
Clear = XIIC_INTR_ARB_LOST_MASK;
}
else if (IntrStatus & XIIC_INTR_TX_ERROR_MASK) {
/* Transmit errors (no acknowledge) received */
IicPtr->Stats.TxErrors++;
TxErrorHandler(IicPtr);
Clear = XIIC_INTR_TX_ERROR_MASK;
}
else if (IntrStatus & XIIC_INTR_NAAS_MASK) {
/* Not Addressed As Slave */
XIic_NotAddrAsSlaveFuncPtr(IicPtr);
Clear = XIIC_INTR_NAAS_MASK;
}
else if (IntrStatus & XIIC_INTR_RX_FULL_MASK) {
/* Receive register/FIFO is full */
IicPtr->Stats.RecvInterrupts++;
if (Status & XIIC_SR_ADDR_AS_SLAVE_MASK) {
XIic_RecvSlaveFuncPtr(IicPtr);
}
else {
XIic_RecvMasterFuncPtr(IicPtr);
}
Clear = XIIC_INTR_RX_FULL_MASK;
}
else if (IntrStatus & XIIC_INTR_AAS_MASK) {
/* Addressed As Slave */
XIic_AddrAsSlaveFuncPtr(IicPtr);
Clear = XIIC_INTR_AAS_MASK;
}
else if (IntrStatus & XIIC_INTR_BNB_MASK) {
/* IIC bus has transitioned to not busy */
/* check if send callback needs to run */
if (IicPtr->BNBOnly == TRUE) {
XIic_BusNotBusyFuncPtr(IicPtr);
IicPtr->BNBOnly = FALSE;
}
else {
IicPtr->SendHandler(IicPtr->SendCallBackRef, 0);
}
Clear = XIIC_INTR_BNB_MASK;
/* The bus is not busy, disable BusNotBusy interrupt */
XIic_mDisableIntr(IicPtr->BaseAddress, XIIC_INTR_BNB_MASK);
}
else if ((IntrStatus & XIIC_INTR_TX_EMPTY_MASK) ||
(IntrStatus & XIIC_INTR_TX_HALF_MASK)) {
/* Transmit register/FIFO is empty or ½ empty *
*/
IicPtr->Stats.SendInterrupts++;
if (Status & XIIC_SR_ADDR_AS_SLAVE_MASK) {
XIic_SendSlaveFuncPtr(IicPtr);
}
else {
XIic_SendMasterFuncPtr(IicPtr);
}
/* Clear Interrupts
*/
IntrStatus = XIIC_READ_IISR(IicPtr->BaseAddress);
Clear = IntrStatus & (XIIC_INTR_TX_EMPTY_MASK |
XIIC_INTR_TX_HALF_MASK);
}
XIIC_WRITE_IISR(IicPtr->BaseAddress, Clear);
}
