int nRFUartEvthandler(UARTDEV *pDev, UART_EVT EvtId, uint8_t *pBuffer, int BufferLen)
{
int cnt = 0;
uint8_t buff[20];
switch (EvtId)
{
case UART_EVT_RXTIMEOUT:
case UART_EVT_RXDATA:
{
/* g_DelayCnt++;
if (g_DelayCnt > 20)
{
g_DelayCnt = 0;
cnt = UARTRx(&g_UartDev, buff, 20);
if (cnt > 0)
UARTTx(&g_UartDev, buff, cnt);
}*/
//cnt = UARTRx(&g_UartDev, buff, 1);
//if (cnt > 0)
// UARTTx(&g_UartDev, buff, cnt);
}
break;
case UART_EVT_TXREADY:
break;
case UART_EVT_LINESTATE:
cnt = UARTRx(&g_UartDev, pBuffer, 6);
if (cnt > 0)
UARTTx(&g_UartDev, pBuffer, cnt);
break;
}
return cnt;
}
int main()
{
bool res;
#ifdef DEMO_C
res = UARTInit(&g_UartDev, &g_UartCfg);
#else
res = g_Uart.Init(g_UartCfg);
#endif
uint8_t d = 0xff;
uint8_t val = 0;
uint32_t errcnt = 0;
uint32_t cnt = 0;
auto t_start = std::chrono::high_resolution_clock::now();
auto t_end = std::chrono::high_resolution_clock::now();
std::chrono::duration<float> elapse = std::chrono::duration<float>(0);
t_start = std::chrono::high_resolution_clock::now();
time_t t;
double e = 0.0;
bool isOK = false;
// do {
#ifdef DEMO_C
while (UARTRx(&g_UartDev, &d, 1) <= 0);
#else
while (g_Uart.Rx(&d, 1) <= 0);
#endif
if (val == d)
isOK = true;
val = Prbs8(d);
// } while (!isOK);
while(1)
{
// t_start = std::chrono::high_resolution_clock::now();
t = time(NULL);
#ifdef DEMO_C
while (UARTRx(&g_UartDev, &d, 1) <= 0);
#else
while (g_Uart.Rx(&d, 1) <= 0);
#endif
{
e += difftime(time(NULL), t);
// t_end = std::chrono::high_resolution_clock::now();
//elapse += std::chrono::duration<float>(t_end-t_start);
cnt++;
// If success send next code
// printf("%x ", d);
if (val != d)
{
errcnt++;
// printf("PRBS %u errors %x %x\n", errcnt, val, d);
}
else if ((cnt & 0x7fff) == 0)
{
printf("PRBS rate %.3f B/s, err : %u\n", cnt / e, errcnt);
// printf("PRBS rate %.3f B/s, err : %u\n", cnt / elapse.count(), errcnt);
}
val = Prbs8(d);
}
}
return 0;
}
int main()
{
bool res;
char *data = "nRF UART Hello World\r\n";
uint8_t buff[20];
/* nrf_gpio_cfg_output(9);
while (1)
{
nrf_gpio_pin_toggle(9);
usDelay(1000);
}*/
//NRF_MPU->PERR0 &= ~(1 << 2);
//uart_init();
//simple_uart_config(UART_RTS_PIN, UART_TX_PIN, UART_CTS_PIN, UART_RX_PIN, false);
#ifdef C_CODE
res = UARTInit(&g_UartDev, &g_UartCfg);
UARTprintf(&g_UartDev, data);
#else
res = g_Uart.Init(g_UartCfg);
g_Uart.printf(data);dfg
#endif
// nrf_drv_gpiote_in_config_t cts_config = GPIOTE_CONFIG_IN_SENSE_TOGGLE(false);
// nrf_drv_gpiote_in_init(p_comm_params->cts_pin_no, &cts_config, gpiote_uart_event_handler);
//for (int i = 0; i < 20; i++)
// simple_uart_put(data[i]);
//simple_uart_putstring((const uint8_t*)data);
while(1) {
uint8_t d;
//usDelay(1000);
//d = simple_uart_get();
//simple_uart_put(d);
#ifndef TEST_INTERRUPT
if (UARTRx(&g_UartDev, &d, 1) > 0)
{
UARTTx(&g_UartDev, &d, 1);
// UARTTx(&g_UartDev, (uint8_t*)data, 22);
//usDelay(1000);
}
#else
int cnt = UARTRx(&g_UartDev, buff, 20);
if (cnt > 0)
{
uint8_t *p = buff;
while (cnt > 0)
{
int l = UARTTx(&g_UartDev, p, cnt);
cnt -= l;
p += l;
}
// UARTTx(&g_UartDev, (uint8_t*)data, 22);
//usDelay(1000);
}
#endif
//__WFI();
}
return 0;
}
