Beispiel #1
0
int16_t usbmsc_mkcfgdesc(uint8_t *buf)
#endif
{
#ifdef CONFIG_USBDEV_DUALSPEED
  FAR const struct usb_epdesc_s *epdesc;
  bool hispeed = (speed == USB_SPEED_HIGH);
  uint16_t bulkmxpacket;
#endif

  /* Configuration descriptor.  If the USB mass storage device is
   * configured as part of a composite device, then the configuration
   * descriptor will be provided by the composite device logic.
   */

#ifndef CONFIG_USBMSC_COMPOSITE
  memcpy(buf, &g_cfgdesc, USB_SIZEOF_CFGDESC);
  buf += USB_SIZEOF_CFGDESC;
#endif

  /* Copy the canned interface descriptor */

  memcpy(buf, &g_ifdesc, USB_SIZEOF_IFDESC);
  buf += USB_SIZEOF_IFDESC;

  /* Make the two endpoint configurations */

#ifdef CONFIG_USBDEV_DUALSPEED
  /* Check for switches between high and full speed */

  hispeed = (speed == USB_SPEED_HIGH);
  if (type == USB_DESC_TYPE_OTHERSPEEDCONFIG)
    {
      hispeed = !hispeed;
    }

  bulkmxpacket = USBMSC_BULKMAXPACKET(hispeed);
  epdesc       = USBMSC_EPBULKINDESC(hispeed);
  memcpy(buf, epdesc, USB_SIZEOF_EPDESC);
  buf += USB_SIZEOF_EPDESC;

  epdesc       = USBMSC_EPBULKOUTDESC(hispeed);
  memcpy(buf, epdesc, USB_SIZEOF_EPDESC);
#else
  memcpy(buf, &g_fsepbulkoutdesc, USB_SIZEOF_EPDESC);
  buf += USB_SIZEOF_EPDESC;
  memcpy(buf, &g_fsepbulkindesc, USB_SIZEOF_EPDESC);
#endif

  return SIZEOF_USBMSC_CFGDESC;
}
Beispiel #2
0
int usbmsc_setconfig(FAR struct usbmsc_dev_s *priv, uint8_t config)
{
	FAR struct usbmsc_req_s *privreq;
	FAR struct usbdev_req_s *req;
#ifdef CONFIG_USBDEV_DUALSPEED
	FAR const struct usb_epdesc_s *epdesc;
	bool hispeed = (priv->usbdev->speed == USB_SPEED_HIGH);
#endif
	int i;
	int ret = 0;

#ifdef CONFIG_DEBUG
	if (priv == NULL) {
		usbtrace(TRACE_CLSERROR(USBMSC_TRACEERR_SETCONFIGINVALIDARGS), 0);
		return -EIO;
	}
#endif

	if (config == priv->config) {
		/* Already configured -- Do nothing */

		usbtrace(TRACE_CLSERROR(USBMSC_TRACEERR_ALREADYCONFIGURED), 0);
		return OK;
	}

	/* Discard the previous configuration data */

	usbmsc_resetconfig(priv);

	/* Was this a request to simply discard the current configuration? */

	if (config == USBMSC_CONFIGIDNONE) {
		usbtrace(TRACE_CLSERROR(USBMSC_TRACEERR_CONFIGNONE), 0);
		return OK;
	}

	/* We only accept one configuration */

	if (config != USBMSC_CONFIGID) {
		usbtrace(TRACE_CLSERROR(USBMSC_TRACEERR_CONFIGIDBAD), 0);
		return -EINVAL;
	}

	/* Configure the IN bulk endpoint */

#ifdef CONFIG_USBDEV_DUALSPEED
	epdesc = USBMSC_EPBULKINDESC(hispeed);
	ret = EP_CONFIGURE(priv->epbulkin, epdesc, false);
#else
	ret = EP_CONFIGURE(priv->epbulkin, usbmsc_getepdesc(USBMSC_EPFSBULKIN), false);
#endif
	if (ret < 0) {
		usbtrace(TRACE_CLSERROR(USBMSC_TRACEERR_EPBULKINCONFIGFAIL), 0);
		goto errout;
	}

	priv->epbulkin->priv = priv;

	/* Configure the OUT bulk endpoint */

#ifdef CONFIG_USBDEV_DUALSPEED
	epdesc = USBMSC_EPBULKOUTDESC(hispeed);
	ret = EP_CONFIGURE(priv->epbulkout, epdesc, true);
#else
	ret = EP_CONFIGURE(priv->epbulkout, usbmsc_getepdesc(USBMSC_EPFSBULKOUT), true);
#endif
	if (ret < 0) {
		usbtrace(TRACE_CLSERROR(USBMSC_TRACEERR_EPBULKOUTCONFIGFAIL), 0);
		goto errout;
	}

	priv->epbulkout->priv = priv;

	/* Queue read requests in the bulk OUT endpoint */

	for (i = 0; i < CONFIG_USBMSC_NRDREQS; i++) {
		privreq = &priv->rdreqs[i];
		req = privreq->req;
		req->len = CONFIG_USBMSC_BULKOUTREQLEN;
		req->priv = privreq;
		req->callback = usbmsc_rdcomplete;
		ret = EP_SUBMIT(priv->epbulkout, req);
		if (ret < 0) {
			usbtrace(TRACE_CLSERROR(USBMSC_TRACEERR_RDSUBMIT), (uint16_t)-ret);
			goto errout;
		}
	}

	priv->config = config;
	return OK;

errout:
	usbmsc_resetconfig(priv);
	return ret;
}