void USB_Host_ResetDevice(void)
{
bool BusSuspended = USB_Host_IsBusSuspended();
USB_INT_Disable(USB_INT_DDISCI);
USB_Host_WaitMS(20);
USB_Host_ResetBus();
while (!(USB_Host_IsResetBusDone()));
USB_INT_Clear(USB_INT_HSOFI);
USB_Host_ResumeBus();
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
/* Workaround for powerless-pullup devices. After a USB bus reset,
all disconnection interrupts are supressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_DDISCI);
break;
}
_delay_ms(1);
}
if (BusSuspended)
USB_Host_SuspendBus();
USB_INT_Enable(USB_INT_DDISCI);
}
uint8_t Pipe_WaitUntilReady(void)
{
#if (USB_STREAM_TIMEOUT_MS < 0xFF)
uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
#else
uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
#endif
for (;;)
{
if (Pipe_GetPipeToken() == PIPE_TOKEN_IN)
{
if (Pipe_IsINReceived())
return PIPE_READYWAIT_NoError;
}
else
{
if (Pipe_IsOUTReady())
return PIPE_READYWAIT_NoError;
}
if (Pipe_IsStalled())
return PIPE_READYWAIT_PipeStalled;
else if (USB_HostState == HOST_STATE_Unattached)
return PIPE_READYWAIT_DeviceDisconnected;
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
if (!(TimeoutMSRem--))
return PIPE_READYWAIT_Timeout;
}
}
}
uint8_t Endpoint_WaitUntilReady(void)
{
#if (USB_STREAM_TIMEOUT_MS < 0xFF)
uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
#else
uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
#endif
for (;;)
{
if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN)
{
if (Endpoint_IsINReady())
return ENDPOINT_READYWAIT_NoError;
}
else
{
if (Endpoint_IsOUTReceived())
return ENDPOINT_READYWAIT_NoError;
}
if (USB_DeviceState == DEVICE_STATE_Unattached)
return ENDPOINT_READYWAIT_DeviceDisconnected;
else if (Endpoint_IsStalled())
return ENDPOINT_READYWAIT_EndpointStalled;
if (USB_INT_HasOccurred(USB_INT_SOFI))
{
USB_INT_Clear(USB_INT_SOFI);
if (!(TimeoutMSRem--))
return ENDPOINT_READYWAIT_Timeout;
}
}
}
/** Waits until the attached device is ready to accept data following a CBW, checking
* to ensure that the device has not stalled the transaction.
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
static uint8_t MassStore_WaitForDataReceived(void)
{
uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
/* Unfreeze the OUT pipe so that it can be checked */
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Select the IN data pipe for data reception */
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Wait until data received in the IN pipe */
while (!(Pipe_IsINReceived()))
{
/* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
/* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
return PIPE_RWSTREAM_Timeout;
}
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the OUT pipe */
MassStore_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the IN pipe */
MassStore_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
return PIPE_RWSTREAM_DeviceDisconnected;
};
return PIPE_RWSTREAM_NoError;
}
uint8_t USB_Host_WaitMS(uint8_t MS)
{
bool BusSuspended = USB_Host_IsBusSuspended();
uint8_t ErrorCode = HOST_WAITERROR_Successful;
USB_INT_Clear(USB_INT_HSOFI);
USB_Host_ResumeBus();
while (MS)
{
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
MS--;
}
if ((USB_IsConnected == false) || (USB_CurrentMode == USB_MODE_DEVICE))
{
ErrorCode = HOST_WAITERROR_DeviceDisconnect;
break;
}
if (Pipe_IsError() == true)
{
Pipe_ClearError();
ErrorCode = HOST_WAITERROR_PipeError;
break;
}
if (Pipe_IsStalled() == true)
{
Pipe_ClearStall();
ErrorCode = HOST_WAITERROR_SetupStalled;
break;
}
}
if (BusSuspended)
USB_Host_SuspendBus();
return ErrorCode;
}
uint8_t Pipe_WaitUntilReady(void)
{
uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
USB_INT_Clear(USB_INT_HSOFI);
while (!(Pipe_ReadWriteAllowed()))
{
if (Pipe_IsStalled())
return PIPE_READYWAIT_PipeStalled;
else if (!(USB_IsConnected))
return PIPE_READYWAIT_DeviceDisconnected;
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
if (!(TimeoutMSRem--))
return PIPE_READYWAIT_Timeout;
}
}
return PIPE_READYWAIT_NoError;
}
uint8_t Endpoint_WaitUntilReady(void)
{
uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
USB_INT_Clear(USB_INT_SOFI);
while (!(Endpoint_ReadWriteAllowed()))
{
if (!(USB_IsConnected))
return ENDPOINT_READYWAIT_DeviceDisconnected;
else if (Endpoint_IsStalled())
return ENDPOINT_READYWAIT_EndpointStalled;
if (USB_INT_HasOccurred(USB_INT_SOFI))
{
USB_INT_Clear(USB_INT_SOFI);
if (!(TimeoutMSRem--))
return ENDPOINT_READYWAIT_Timeout;
}
}
return ENDPOINT_READYWAIT_NoError;
}
ISR(USB_GEN_vect, ISR_BLOCK)
{
#if defined(USB_CAN_BE_DEVICE)
#if !defined(NO_SOF_EVENTS)
if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI))
{
USB_INT_Clear(USB_INT_SOFI);
EVENT_USB_Device_StartOfFrame();
}
#endif
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
if (USB_INT_HasOccurred(USB_INT_VBUSTI) && USB_INT_IsEnabled(USB_INT_VBUSTI))
{
USB_INT_Clear(USB_INT_VBUSTI);
if (USB_VBUS_GetStatus())
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_DeviceState = DEVICE_STATE_Powered;
EVENT_USB_Device_Connect();
}
else
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
USB_DeviceState = DEVICE_STATE_Unattached;
EVENT_USB_Device_Disconnect();
}
}
#endif
if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI))
{
USB_INT_Disable(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_WAKEUPI);
USB_CLK_Freeze();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
USB_DeviceState = DEVICE_STATE_Unattached;
EVENT_USB_Device_Disconnect();
#else
USB_DeviceState = DEVICE_STATE_Suspended;
EVENT_USB_Device_Suspend();
#endif
}
if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI))
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_CLK_Unfreeze();
USB_INT_Clear(USB_INT_WAKEUPI);
USB_INT_Disable(USB_INT_WAKEUPI);
USB_INT_Enable(USB_INT_SUSPI);
if (USB_Device_ConfigurationNumber)
USB_DeviceState = DEVICE_STATE_Configured;
else
USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;
#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
EVENT_USB_Device_Connect();
#else
EVENT_USB_Device_WakeUp();
#endif
}
if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
{
USB_INT_Clear(USB_INT_EORSTI);
USB_DeviceState = DEVICE_STATE_Default;
USB_Device_ConfigurationNumber = 0;
USB_INT_Clear(USB_INT_SUSPI);
USB_INT_Disable(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_WAKEUPI);
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize,
ENDPOINT_BANK_SINGLE);
#if defined(INTERRUPT_CONTROL_ENDPOINT)
USB_INT_Enable(USB_INT_RXSTPI);
#endif
EVENT_USB_Device_Reset();
}
#endif
#if defined(USB_CAN_BE_HOST)
#if !defined(NO_SOF_EVENTS)
if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
EVENT_USB_Host_StartOfFrame();
}
#endif
if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
{
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Disable(USB_INT_DDISCI);
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
{
USB_INT_Clear(USB_INT_VBERRI);
USB_Host_VBUS_Manual_Off();
USB_Host_VBUS_Auto_Off();
EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip);
EVENT_USB_Host_DeviceUnattached();
USB_HostState = HOST_STATE_Unattached;
}
if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI))
{
USB_INT_Clear(USB_INT_SRPI);
USB_INT_Disable(USB_INT_SRPI);
EVENT_USB_Host_DeviceAttached();
USB_INT_Enable(USB_INT_DDISCI);
USB_HostState = HOST_STATE_Powered;
}
if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
{
USB_INT_Clear(USB_INT_BCERRI);
EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0);
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
#endif
#if defined(USB_CAN_BE_BOTH)
if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
{
USB_INT_Clear(USB_INT_IDTI);
if (USB_DeviceState != DEVICE_STATE_Unattached)
EVENT_USB_Device_Disconnect();
if (USB_HostState != HOST_STATE_Unattached)
EVENT_USB_Host_DeviceUnattached();
USB_CurrentMode = USB_GetUSBModeFromUID();
USB_ResetInterface();
EVENT_USB_UIDChange();
}
#endif
}
void USB_Host_ProcessNextHostState(void)
{
uint8_t ErrorCode = HOST_ENUMERROR_NoError;
uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
static uint16_t WaitMSRemaining;
static uint8_t PostWaitState;
switch (USB_HostState)
{
case HOST_STATE_WaitForDevice:
if (WaitMSRemaining)
{
if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
{
USB_HostState = PostWaitState;
ErrorCode = HOST_ENUMERROR_WaitStage;
break;
}
if (!(--WaitMSRemaining))
USB_HostState = PostWaitState;
}
break;
case HOST_STATE_Powered:
WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
break;
case HOST_STATE_Powered_WaitForDeviceSettle:
if (WaitMSRemaining--)
{
_delay_ms(1);
break;
}
else
{
USB_Host_VBUS_Manual_Off();
USB_OTGPAD_On();
USB_Host_VBUS_Auto_Enable();
USB_Host_VBUS_Auto_On();
USB_HostState = HOST_STATE_Powered_WaitForConnect;
}
break;
case HOST_STATE_Powered_WaitForConnect:
if (USB_INT_HasOccurred(USB_INT_DCONNI))
{
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_VBERRI);
USB_INT_Enable(USB_INT_VBERRI);
USB_Host_ResumeBus();
Pipe_ClearPipes();
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
}
break;
case HOST_STATE_Powered_DoReset:
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
break;
case HOST_STATE_Powered_ConfigPipe:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_HostState = HOST_STATE_Default;
break;
case HOST_STATE_Default:
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Device << 8),
.wIndex = 0,
.wLength = 8,
};
uint8_t DataBuffer[8];
if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
break;
case HOST_STATE_Default_PostReset:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
USB_ControlPipeSize, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetAddress,
.wValue = USB_HOST_DEVICEADDRESS,
.wIndex = 0,
.wLength = 0,
};
if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
break;
case HOST_STATE_Default_PostAddressSet:
USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
EVENT_USB_Host_DeviceEnumerationComplete();
USB_HostState = HOST_STATE_Addressed;
break;
}
if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
{
EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode);
USB_Host_VBUS_Auto_Off();
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
}
uint8_t USB_Host_WaitMS(uint8_t MS)
{
bool BusSuspended = USB_Host_IsBusSuspended();
uint8_t ErrorCode = HOST_WAITERROR_Successful;
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
USB_Host_ResumeBus();
while (MS)
{
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
MS--;
}
if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host))
{
ErrorCode = HOST_WAITERROR_DeviceDisconnect;
break;
}
if (Pipe_IsError() == true)
{
Pipe_ClearError();
ErrorCode = HOST_WAITERROR_PipeError;
break;
}
if (Pipe_IsStalled() == true)
{
Pipe_ClearStall();
ErrorCode = HOST_WAITERROR_SetupStalled;
break;
}
}
if (BusSuspended)
USB_Host_SuspendBus();
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
return ErrorCode;
}
static void USB_Host_ResetDevice(void)
{
bool BusSuspended = USB_Host_IsBusSuspended();
USB_INT_Disable(USB_INT_DDISCI);
USB_Host_ResetBus();
while (!(USB_Host_IsBusResetComplete()));
USB_Host_ResumeBus();
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
/* Workaround for powerless-pull-up devices. After a USB bus reset,
all disconnection interrupts are suppressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_DDISCI);
break;
}
_delay_ms(1);
}
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
if (BusSuspended)
USB_Host_SuspendBus();
USB_INT_Enable(USB_INT_DDISCI);
}
ISR(USB_GEN_vect, ISR_BLOCK)
{
#if defined(USB_CAN_BE_DEVICE)
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
if (USB_INT_HasOccurred(USB_INT_VBUS) && USB_INT_IsEnabled(USB_INT_VBUS))
{
USB_INT_Clear(USB_INT_VBUS);
RAISE_EVENT(USB_VBUSChange);
if (USB_VBUS_GetStatus())
{
RAISE_EVENT(USB_VBUSConnect);
if (USB_IsConnected)
RAISE_EVENT(USB_Disconnect);
USB_ResetInterface();
USB_IsConnected = true;
RAISE_EVENT(USB_Connect);
}
else
{
RAISE_EVENT(USB_Disconnect);
USB_Detach();
USB_CLK_Freeze();
USB_PLL_Off();
USB_REG_Off();
USB_IsConnected = false;
RAISE_EVENT(USB_VBUSDisconnect);
USB_INT_Clear(USB_INT_VBUS);
}
}
#endif
if (USB_INT_HasOccurred(USB_INT_SUSPEND) && USB_INT_IsEnabled(USB_INT_SUSPEND))
{
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Disable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_WAKEUP);
USB_CLK_Freeze();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
USB_IsSuspended = true;
RAISE_EVENT(USB_Suspend);
#if defined(USB_LIMITED_CONTROLLER) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
if (USB_IsConnected)
{
USB_IsConnected = false;
RAISE_EVENT(USB_Disconnect);
}
#endif
}
if (USB_INT_HasOccurred(USB_INT_WAKEUP) && USB_INT_IsEnabled(USB_INT_WAKEUP))
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_CLK_Unfreeze();
USB_INT_Clear(USB_INT_WAKEUP);
USB_INT_Disable(USB_INT_WAKEUP);
USB_INT_Enable(USB_INT_SUSPEND);
#if defined(USB_LIMITED_CONTROLLER) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
if (!(USB_IsConnected))
{
USB_IsConnected = true;
RAISE_EVENT(USB_Connect);
}
#endif
USB_IsSuspended = false;
RAISE_EVENT(USB_WakeUp);
}
if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
{
USB_INT_Clear(USB_INT_EORSTI);
USB_ConfigurationNumber = 0;
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Disable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_WAKEUP);
Endpoint_ClearEndpoints();
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_ControlEndpointSize,
ENDPOINT_BANK_SINGLE);
RAISE_EVENT(USB_Reset);
}
#endif
#if defined(USB_CAN_BE_HOST)
if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
{
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Disable(USB_INT_DDISCI);
RAISE_EVENT(USB_DeviceUnattached);
RAISE_EVENT(USB_Disconnect);
USB_ResetInterface();
}
if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
{
USB_INT_Clear(USB_INT_VBERRI);
USB_Host_VBUS_Manual_Off();
USB_Host_VBUS_Auto_Off();
RAISE_EVENT(USB_HostError, HOST_ERROR_VBusVoltageDip);
RAISE_EVENT(USB_DeviceUnattached);
USB_HostState = HOST_STATE_Unattached;
}
if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI))
{
USB_INT_Clear(USB_INT_SRPI);
USB_INT_Disable(USB_INT_SRPI);
RAISE_EVENT(USB_DeviceAttached);
USB_INT_Enable(USB_INT_DDISCI);
USB_HostState = HOST_STATE_Attached;
}
if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
{
USB_INT_Clear(USB_INT_BCERRI);
RAISE_EVENT(USB_DeviceEnumerationFailed, HOST_ENUMERROR_NoDeviceDetected, 0);
RAISE_EVENT(USB_DeviceUnattached);
if (USB_IsConnected)
RAISE_EVENT(USB_Disconnect);
USB_ResetInterface();
}
#endif
#if defined(USB_CAN_BE_BOTH)
if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
{
USB_INT_Clear(USB_INT_IDTI);
if (USB_IsConnected)
{
if (USB_CurrentMode == USB_MODE_HOST)
RAISE_EVENT(USB_DeviceUnattached);
else
RAISE_EVENT(USB_Disconnect);
}
RAISE_EVENT(USB_UIDChange);
USB_ResetInterface();
}
#endif
}
static uint8_t SImage_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, SI_PIMA_Container_t* const PIMAHeader)
{
uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber);
Pipe_Unfreeze();
while (!(Pipe_IsReadWriteAllowed()))
{
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
if (!(TimeoutMSRem))
{
return PIPE_RWSTREAM_Timeout;
}
}
Pipe_Freeze();
Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipeNumber);
Pipe_Unfreeze();
if (Pipe_IsStalled())
{
USB_Host_ClearPipeStall(SIInterfaceInfo->Config.DataOUTPipeNumber);
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_Freeze();
Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber);
Pipe_Unfreeze();
if (Pipe_IsStalled())
{
USB_Host_ClearPipeStall(SIInterfaceInfo->Config.DataINPipeNumber);
return PIPE_RWSTREAM_PipeStalled;
}
if (USB_HostState == HOST_STATE_Unattached)
return PIPE_RWSTREAM_DeviceDisconnected;
}
Pipe_Read_Stream_LE(PIMAHeader, PIMA_COMMAND_SIZE(0), NO_STREAM_CALLBACK);
if (PIMAHeader->Type == CType_ResponseBlock)
{
uint8_t ParamBytes = (PIMAHeader->DataLength - PIMA_COMMAND_SIZE(0));
if (ParamBytes)
Pipe_Read_Stream_LE(&PIMAHeader->Params, ParamBytes, NO_STREAM_CALLBACK);
Pipe_ClearIN();
PIMAHeader->Code &= 0x0000000F;
}
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
/** Function to receive a PIMA response container from the attached still image device.
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t SImage_ReceiveBlockHeader(void)
{
uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
/* Unfreeze the data IN pipe */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Wait until data received on the IN pipe */
while (!(Pipe_IsReadWriteAllowed()))
{
/* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
/* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
{
/* Return error code */
return PIPE_RWSTREAM_Timeout;
}
}
Pipe_Freeze();
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the OUT pipe */
USB_Host_ClearPipeStall(SIMAGE_DATA_OUT_PIPE);
/* Return error code and break out of the loop */
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_Freeze();
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the IN pipe */
USB_Host_ClearPipeStall(SIMAGE_DATA_IN_PIPE);
/* Return error code */
return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (USB_HostState == HOST_STATE_Unattached)
return PIPE_RWSTREAM_DeviceDisconnected;
}
/* Load in the response from the attached device */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0));
/* Check if the returned block type is a response block */
if (PIMA_ReceivedBlock.Type == CType_ResponseBlock)
{
/* Determine the size of the parameters in the block via the data length attribute */
uint8_t ParamBytes = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Check if the device has returned any parameters */
if (ParamBytes)
{
/* Read the PIMA parameters from the data IN pipe */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes);
}
/* Clear pipe bank after use */
Pipe_ClearIN();
}
/* Freeze the IN pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
}
