//! This function is called by the standard USB read request function when
//! the USB request is not supported. This function returns true when the
//! request is processed. This function returns false if the request is not
//! supported. In this case, a STALL handshake will be automatically
//! sent by the standard USB read request function.
//!
bool usb_user_read_request(U8 type, U8 request)
{
Usb_read_endpoint_data(EP_CONTROL, 8); // string_type
Usb_read_endpoint_data(EP_CONTROL, 8); // descriptor_type
switch (request)
{
#if( EVK1101_CTRL_PANEL_PID==EVK1101_CTRL_PANEL_DEMO_HID_MS_PID )
case MASS_STORAGE_RESET:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
return true;
case GET_MAX_LUN:
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, get_nb_lun() - 1);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
while(!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
ms_multiple_drive = true;
return true;
#endif
/*
case HID_SET_REPORT:
switch (descriptor_type)
{
case HID_REPORT_OUTPUT:
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
return true;
default:
break;
}
break;
case HID_SET_IDLE:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
return true;
*/
default:
break;
}
return false;
}
//! This function is called by the standard USB read request function when
//! the USB request is not supported. This function returns true when the
//! request is processed. This function returns false if the request is not
//! supported. In this case, a STALL handshake will be automatically
//! sent by the standard USB read request function.
//!
bool usb_user_read_request(uint8_t type, uint8_t request)
{
uint16_t wInterface;
uint8_t wValue_msb;
uint8_t wValue_lsb;
wValue_lsb = Usb_read_endpoint_data(EP_CONTROL, 8);
wValue_msb = Usb_read_endpoint_data(EP_CONTROL, 8);
//** Specific request from Class MassStorage
if( USB_SETUP_SET_CLASS_INTER == type )
{
switch( request )
{
case MASS_STORAGE_RESET:
// wValue must be 0
// wIndex = Interface
if( (0!=wValue_lsb) || (0!=wValue_msb) )
break;
wInterface=Usb_read_endpoint_data(EP_CONTROL, 16);
if( INTERFACE_NB != wInterface )
break;
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
return true;
}
}
if( USB_SETUP_GET_CLASS_INTER == type )
{
switch( request )
{
case GET_MAX_LUN:
// wValue must be 0
// wIndex = Interface
if( (0!=wValue_lsb) || (0!=wValue_msb) )
break;
wInterface=Usb_read_endpoint_data(EP_CONTROL, 16);
if( INTERFACE_NB != wInterface )
break;
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, get_nb_lun() - 1);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
while(!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
ms_multiple_drive = true;
return true;
}
}
return false;
}
//! This function manages the CLEAR FEATURE request.
//!
void usb_clear_feature(void)
{
U8 wValue;
U8 wIndex;
switch (bmRequestType)
{
#if (USB_REMOTE_WAKEUP_FEATURE == true)
case USB_SETUP_SET_STAND_DEVICE:
wValue = Usb_read_endpoint_data(EP_CONTROL, 8);
if (wValue != FEATURE_DEVICE_REMOTE_WAKEUP)
break; // Invalid request
device_status &= ~USB_DEV_STATUS_REMOTEWAKEUP;
remote_wakeup_feature = false;
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
return;
#endif
case USB_SETUP_SET_STAND_INTERFACE:
break;
case USB_SETUP_SET_STAND_ENDPOINT:
wValue = Usb_read_endpoint_data(EP_CONTROL, 8);
if (wValue != FEATURE_ENDPOINT_HALT)
break;
Usb_read_endpoint_data(EP_CONTROL, 8); //!< dummy read (MSB of wValue)
wIndex = Usb_read_endpoint_data(EP_CONTROL, 8);
wIndex = Get_desc_ep_nbr(wIndex);
if (!Is_usb_endpoint_enabled(wIndex))
break;
if (wIndex != EP_CONTROL)
{
Usb_disable_stall_handshake(wIndex);
Usb_reset_endpoint(wIndex);
Usb_reset_data_toggle(wIndex);
}
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
return;
default:
break;
}
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
//! This function manages the CLEAR FEATURE request.
//!
void usb_clear_feature(void)
{
U8 wValue;
U8 wIndex;
if (bmRequestType == DEVICE_TYPE || bmRequestType == INTERFACE_TYPE)
{
//!< keep that order (set StallRq/clear RxSetup) or a
//!< OUT request following the SETUP may be acknowledged
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
else if (bmRequestType == ENDPOINT_TYPE)
{
wValue = Usb_read_endpoint_data(EP_CONTROL, 8);
if (wValue == FEATURE_ENDPOINT_HALT)
{
Usb_read_endpoint_data(EP_CONTROL, 8); //!< dummy read (MSB of wValue)
wIndex = Usb_read_endpoint_data(EP_CONTROL, 8);
wIndex = Get_desc_ep_nbr(wIndex);
if (Is_usb_endpoint_enabled(wIndex))
{
if (wIndex != EP_CONTROL)
{
Usb_disable_stall_handshake(wIndex);
Usb_reset_endpoint(wIndex);
Usb_reset_data_toggle(wIndex);
}
endpoint_status[wIndex] = 0; // Halt feature flag
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
}
else
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
}
else
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
}
}
//! This function manages the GET INTERFACE request.
//!
void usb_get_interface(void)
{
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! This function manages the HID Get_Descriptor request.
//!
static void hid_get_descriptor(U8 size_of_report, const U8* p_usb_hid_report)
{
bool zlp;
U16 wIndex;
U16 wLength;
zlp = false; /* no zero length packet */
data_to_transfer = size_of_report;
pbuffer = p_usb_hid_report;
wIndex = Usb_read_endpoint_data(EP_CONTROL, 16);
wIndex = usb_format_usb_to_mcu_data(16, wIndex);
wLength = Usb_read_endpoint_data(EP_CONTROL, 16);
wLength = usb_format_usb_to_mcu_data(16, wLength);
Usb_ack_setup_received_free(); //!< clear the setup received flag
if (wLength > data_to_transfer)
{
zlp = !(data_to_transfer % EP_CONTROL_LENGTH); //!< zero length packet condition
}
else
{
data_to_transfer = wLength; //!< send only requested number of data bytes
}
Usb_ack_nak_out(EP_CONTROL);
while (data_to_transfer && (!Is_usb_nak_out(EP_CONTROL)))
{
while( !Is_usb_control_in_ready() && !Is_usb_nak_out(EP_CONTROL) );
if( Is_usb_nak_out(EP_CONTROL) )
break; // don't clear the flag now, it will be cleared after
Usb_reset_endpoint_fifo_access(EP_CONTROL);
data_to_transfer = usb_write_ep_txpacket(EP_CONTROL, pbuffer,
data_to_transfer, &pbuffer);
if( Is_usb_nak_out(EP_CONTROL) )
break;
else
Usb_ack_control_in_ready_send(); //!< Send data until necessary
}
if ( zlp && (!Is_usb_nak_out(EP_CONTROL)) )
{
while (!Is_usb_control_in_ready());
Usb_ack_control_in_ready_send();
}
while (!(Is_usb_nak_out(EP_CONTROL)));
Usb_ack_nak_out(EP_CONTROL);
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! This function manages the GET CONFIGURATION request. The current
//! configuration number is returned.
//!
void usb_get_configuration(void)
{
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, usb_configuration_nb);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! This function manages the SET ADDRESS request. When complete, the device
//! will filter the requests using the new address.
//!
void usb_set_address(void)
{
U8 addr = Usb_read_endpoint_data(EP_CONTROL, 8);
Usb_configure_address(addr);
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_in_ready()); //!< waits for status phase done
//!< before using the new address
Usb_enable_address();
}
//! This function manages the GET STATUS request. The device, interface or
//! endpoint status is returned.
//!
void usb_get_status(void)
{
U8 wIndex;
switch (bmRequestType)
{
case REQUEST_DEVICE_STATUS:
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, device_status);
break;
case REQUEST_INTERFACE_STATUS:
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, INTERFACE_STATUS);
break;
case REQUEST_ENDPOINT_STATUS:
Usb_read_endpoint_data(EP_CONTROL, 16); //!< dummy read (wValue)
wIndex = Usb_read_endpoint_data(EP_CONTROL, 8);
wIndex = Get_desc_ep_nbr(wIndex);
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, Is_usb_endpoint_stall_requested(wIndex) );
break;
default:
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
return;
}
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! This function manages the SET CONFIGURATION request. If the selected
//! configuration is valid, this function call the usb_user_endpoint_init()
//! function that will configure the endpoints following the configuration
//! number.
//!
void usb_set_configuration(void)
{
U8 configuration_number = Usb_read_endpoint_data(EP_CONTROL, 8);
if (configuration_number <= NB_CONFIGURATION)
{
Usb_ack_setup_received_free();
usb_configuration_nb = configuration_number;
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
usb_user_endpoint_init(usb_configuration_nb); //!< endpoint configuration
Usb_set_configuration_action();
}
else
{
//!< keep that order (set StallRq/clear RxSetup) or a
//!< OUT request following the SETUP may be acknowledged
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
}
//!
void usb_hid_set_idle (U8 u8_report_id, U8 u8_duration )
{
U16 wInterface;
// Get interface number to put in idle mode
wInterface=Usb_read_endpoint_data(EP_CONTROL, 16);
Usb_ack_setup_received_free();
if( wInterface == INTERFACE_NB )
g_u8_report_rate = u8_duration;
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
}
static void usb_hid_set_idle (uint8_t u8_report_id, uint8_t u8_duration )
{
uint16_t wInterface;
// Get interface number to put in idle mode
wInterface=usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
Usb_ack_setup_received_free();
if( wInterface == INTERFACE_NB_KBD )
g_u8_report_rate = u8_duration;
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
}
//! @brief This function manages hit set report request.
//!
static void usb_hid_set_report_ouput (void)
{
//Usb_ack_receive_setup();
Usb_ack_setup_received_free();
//Usb_send_control_in();
Usb_ack_control_in_ready_send();
//while(!Is_usb_receive_out());
while (!Is_usb_control_out_received());
//Usb_ack_receive_out();
Usb_ack_control_out_received_free();
//Usb_send_control_in();
Usb_ack_control_in_ready_send();
}
void cdc_set_line_coding (void)
{
Usb_ack_setup_received_free();
while(!Is_usb_control_out_received());
Usb_reset_endpoint_fifo_access(EP_CONTROL);
LSB0(line_coding.dwDTERate) = Usb_read_endpoint_data(EP_CONTROL, 8);
LSB1(line_coding.dwDTERate) = Usb_read_endpoint_data(EP_CONTROL, 8);
LSB2(line_coding.dwDTERate) = Usb_read_endpoint_data(EP_CONTROL, 8);
LSB3(line_coding.dwDTERate) = Usb_read_endpoint_data(EP_CONTROL, 8);
line_coding.bCharFormat = Usb_read_endpoint_data(EP_CONTROL, 8);
line_coding.bParityType = Usb_read_endpoint_data(EP_CONTROL, 8);
line_coding.bDataBits = Usb_read_endpoint_data(EP_CONTROL, 8);
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
// Set the baudrate of the USART
{
static usart_options_t dbg_usart_options;
uint32_t stopbits, parity;
if ( line_coding.bCharFormat==0 ) stopbits = USART_1_STOPBIT;
else if( line_coding.bCharFormat==1 ) stopbits = USART_1_5_STOPBITS;
else stopbits = USART_2_STOPBITS;
if ( line_coding.bParityType==0 ) parity = USART_NO_PARITY;
else if( line_coding.bParityType==1 ) parity = USART_ODD_PARITY;
else if( line_coding.bParityType==2 ) parity = USART_EVEN_PARITY;
else if( line_coding.bParityType==3 ) parity = USART_MARK_PARITY;
else parity = USART_SPACE_PARITY;
// Options for debug USART.
dbg_usart_options.baudrate = line_coding.dwDTERate;
dbg_usart_options.charlength = line_coding.bDataBits;
dbg_usart_options.paritytype = parity;
dbg_usart_options.stopbits = stopbits;
dbg_usart_options.channelmode = USART_NORMAL_CHMODE;
// Initialize it in RS232 mode.
usart_init_rs232(DBG_USART, &dbg_usart_options, pcl_freq_param.pba_f);
// Enable Rx interrupts
DBG_USART->ier = AVR32_USART_IER_RXRDY_MASK;
}
}
void cdc_get_line_coding(void)
{
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, LSB0(line_coding.dwDTERate));
Usb_write_endpoint_data(EP_CONTROL, 8, LSB1(line_coding.dwDTERate));
Usb_write_endpoint_data(EP_CONTROL, 8, LSB2(line_coding.dwDTERate));
Usb_write_endpoint_data(EP_CONTROL, 8, LSB3(line_coding.dwDTERate));
Usb_write_endpoint_data(EP_CONTROL, 8, line_coding.bCharFormat);
Usb_write_endpoint_data(EP_CONTROL, 8, line_coding.bParityType);
Usb_write_endpoint_data(EP_CONTROL, 8, line_coding.bDataBits );
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
while(!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! @brief This function manages hid get idle request.
//!
//! @param u8_report_id 0 the idle rate applies to all input reports, else only applies to the Report ID
//!
void usb_hid_get_idle (U8 u8_report_id)
{
U16 wLength;
U16 wInterface;
// Get interface number to put in idle mode
wInterface=Usb_read_endpoint_data(EP_CONTROL, 16);
wLength =Usb_read_endpoint_data(EP_CONTROL, 16);
Usb_ack_setup_received_free();
if( (wLength != 0) && (wInterface == INTERFACE_NB) )
{
Usb_write_endpoint_data(EP_CONTROL, 8, g_u8_report_rate);
Usb_ack_control_in_ready_send();
}
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
void usb_hid_set_report_feature(void)
{
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();// send a ZLP
while(!Is_usb_control_out_received());
if(Usb_read_endpoint_data(EP_CONTROL, 8)==0x55)
if(Usb_read_endpoint_data(EP_CONTROL, 8)==0xAA)
if(Usb_read_endpoint_data(EP_CONTROL, 8)==0x55)
if(Usb_read_endpoint_data(EP_CONTROL, 8)==0xAA)
{
jump_bootloader=1; // Specific Request with 0x55AA55AA code
}
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while(!Is_usb_control_in_ready());
}
//! @brief This function manages hid get idle request.
//!
//! @param u8_report_id 0 the idle rate applies to all input reports, else only applies to the Report ID
//!
static void usb_hid_get_idle (uint8_t u8_report_id)
{
uint16_t wLength;
uint16_t wInterface;
// Get interface number to put in idle mode
wInterface=usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
wLength =usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
Usb_ack_setup_received_free();
if( (wLength != 0) && (wInterface == INTERFACE_NB_KBD) )
{
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, g_u8_report_rate);
Usb_ack_control_in_ready_send();
}
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! Checks if the audio control request is a Feature Unit Control request for the good feature unit and channel
//!
//! @return the target audio and the Control Selector from request
//!
st_audio_cmd check_audio_control_request(uint16_t wValue)
{
st_audio_cmd cmd;
uint16_t wIndex;
uint16_t length;
LSB(wIndex)=Usb_read_endpoint_data(EP_CONTROL, 8);
MSB(wIndex)=Usb_read_endpoint_data(EP_CONTROL, 8);
LSB(length)=Usb_read_endpoint_data(EP_CONTROL, 8);
MSB(length)=Usb_read_endpoint_data(EP_CONTROL, 8);
Usb_ack_setup_received_free();
cmd.target = TARGET_UNDEFINED;
cmd.cs = AUDIO_FU_CONTROL_CS_UNDEFINED;
// Note: The wValue field interpretation is qualified by the value in the wIndex field.
// Check target of the command
if( LSB(wIndex) == AC_INTERFACE_NB)
{
// The request is for the Feature Unit Control then
// MSB(wIndex) = Feature Unit ID, LSB(wValue) = Channel Number (CN), MSB(wValue) = Control Selector (CS)
cmd.cs = MSB(wValue);
if( (MSB(wIndex) == SPEAKER_FEATURE_UNIT_ID)
&& (LSB(wValue) == 0) )
{
// for Master Channel of speaker
cmd.target = TARGET_SPEAKER;
}
if( (MSB(wIndex) == MICRO_FEATURE_UNIT_ID)
&& (LSB(wValue) == 0) )
{
// for Master Channel of micro
cmd.target = TARGET_MICRO;
}
}
return cmd;
}
//! This function manages the SETUP_GET_INTERFACE request.
//!
bool usb_get_interface (void)
{
U16 wInterface;
U16 wValue;
// Read wValue
wValue = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
// wValue = Alternate Setting
// wIndex = Interface
wInterface=usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
if(0!=wValue)
return false;
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, usb_interface_status[wInterface] );
Usb_ack_control_in_ready_send();
while( !Is_usb_control_out_received() );
Usb_ack_control_out_received_free();
return true;
}
void audio_speaker_set_sample_freq(void)
{
uint32_t sample_freq=0;
Usb_ack_setup_received_free();
while(!Is_usb_control_out_received())
{
TASKS_SCHEDULE();
}
Usb_reset_endpoint_fifo_access(EP_CONTROL);
LSB0(sample_freq)=Usb_read_endpoint_data(EP_CONTROL, 8);
LSB1(sample_freq)=Usb_read_endpoint_data(EP_CONTROL, 8);
LSB2(sample_freq)=Usb_read_endpoint_data(EP_CONTROL, 8);
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); // send a ZLP
while (!Is_usb_control_in_ready())
{
TASKS_SCHEDULE();
}
#if (defined BOARD) && (BOARD==EVK1105) && (defined DEFAULT_DACS) && (DEFAULT_DACS==AUDIO_MIXER_DAC_AIC23B)
// Disable microphone callback interrupt in order for the flush to not be blocked.
// TODO: audio_mixer_dacs_flush_direct flushes Rx and Tw part of the DAC.
// Should we separate them? Here, we want to flash the output only.
device_audio_disable_microphone();
#endif
audio_mixer_dacs_flush_direct(false);
usb_stream_init(
sample_freq
, 2
, 16
, false
);
#if (defined BOARD) && (BOARD==EVK1105) && (defined DEFAULT_DACS) && (DEFAULT_DACS==AUDIO_MIXER_DAC_AIC23B)
// Enable microphone call back interrupts.
device_audio_enable_microphone();
#endif
}
//! This function manages the GET DESCRIPTOR request. The device descriptor,
//! the configuration descriptor and the device qualifier are supported. All
//! other descriptors must be supported by the usb_user_get_descriptor
//! function.
//! Only 1 configuration is supported.
//!
void usb_get_descriptor(void)
{
bool zlp;
U16 wLength;
U8 descriptor_type;
U8 string_type;
Union32 temp;
#if (USB_HIGH_SPEED_SUPPORT==true)
bool b_first_data = true;
#endif
zlp = false; /* no zero length packet */
string_type = Usb_read_endpoint_data(EP_CONTROL, 8); /* read LSB of wValue */
descriptor_type = Usb_read_endpoint_data(EP_CONTROL, 8); /* read MSB of wValue */
switch (descriptor_type)
{
case DEVICE_DESCRIPTOR:
data_to_transfer = Usb_get_dev_desc_length(); //!< sizeof(usb_dev_desc);
pbuffer = Usb_get_dev_desc_pointer();
break;
#if (USB_HIGH_SPEED_SUPPORT==false)
case CONFIGURATION_DESCRIPTOR:
data_to_transfer = Usb_get_conf_desc_length(); //!< sizeof(usb_conf_desc);
pbuffer = Usb_get_conf_desc_pointer();
break;
#else
case CONFIGURATION_DESCRIPTOR:
if( Is_usb_full_speed_mode() )
{
data_to_transfer = Usb_get_conf_desc_fs_length(); //!< sizeof(usb_conf_desc_fs);
pbuffer = Usb_get_conf_desc_fs_pointer();
}else{
data_to_transfer = Usb_get_conf_desc_hs_length(); //!< sizeof(usb_conf_desc_hs);
pbuffer = Usb_get_conf_desc_hs_pointer();
}
break;
case OTHER_SPEED_CONFIGURATION_DESCRIPTOR:
if( !Is_usb_full_speed_mode() )
{
data_to_transfer = Usb_get_conf_desc_fs_length(); //!< sizeof(usb_conf_desc_fs);
pbuffer = Usb_get_conf_desc_fs_pointer();
}else{
data_to_transfer = Usb_get_conf_desc_hs_length(); //!< sizeof(usb_conf_desc_hs);
pbuffer = Usb_get_conf_desc_hs_pointer();
}
break;
case DEVICE_QUALIFIER_DESCRIPTOR:
data_to_transfer = Usb_get_qualifier_desc_length(); //!< sizeof(usb_qualifier_desc);
pbuffer = Usb_get_qualifier_desc_pointer();
break;
#endif
default:
if (!usb_user_get_descriptor(descriptor_type, string_type))
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
return;
}
break;
}
temp.u32 = Usb_read_endpoint_data(EP_CONTROL, 32); //!< read wIndex and wLength with a 32-bit access
//!< since this access is aligned with a 32-bit
//!< boundary from the beginning of the endpoint
wLength = usb_format_usb_to_mcu_data(16, temp.u16[1]); //!< ignore wIndex, keep and format wLength
Usb_ack_setup_received_free(); //!< clear the setup received flag
if (wLength > data_to_transfer)
{
zlp = !(data_to_transfer % EP_CONTROL_LENGTH); //!< zero length packet condition
}
else
{
// No need to test ZLP sending since we send the exact number of bytes as
// expected by the host.
data_to_transfer = wLength; //!< send only requested number of data bytes
}
Usb_ack_nak_out(EP_CONTROL);
while (data_to_transfer && !Is_usb_nak_out(EP_CONTROL))
{
while (!Is_usb_control_in_ready() && !Is_usb_nak_out(EP_CONTROL));
if (Is_usb_nak_out(EP_CONTROL))
break; // don't clear the flag now, it will be cleared after
Usb_reset_endpoint_fifo_access(EP_CONTROL);
#if (USB_HIGH_SPEED_SUPPORT==true) // To support other descriptors like OTHER_SPEED_CONFIGURATION_DESCRIPTOR
if( b_first_data ) {
b_first_data = false;
if( 0!= data_to_transfer ) {
usb_write_ep_txpacket(EP_CONTROL, pbuffer, 1, &pbuffer);
data_to_transfer--;
}
if( 0!= data_to_transfer ) {
usb_write_ep_txpacket(EP_CONTROL, &descriptor_type, 1, NULL);
pbuffer = ((const U8*)pbuffer)+1;
data_to_transfer--;
}
}
#endif
if( 0!= data_to_transfer ) {
data_to_transfer = usb_write_ep_txpacket(EP_CONTROL, pbuffer,
data_to_transfer, &pbuffer);
}
if (Is_usb_nak_out(EP_CONTROL))
break;
Usb_ack_control_in_ready_send(); //!< Send data until necessary
}
if (zlp && !Is_usb_nak_out(EP_CONTROL))
{
while (!Is_usb_control_in_ready());
Usb_ack_control_in_ready_send();
}
while (!Is_usb_nak_out(EP_CONTROL));
Usb_ack_nak_out(EP_CONTROL);
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! This function is called by the standard USB read request function when
//! the USB request is not supported. This function returns true when the
//! request is processed. This function returns false if the request is not
//! supported. In this case, a STALL handshake will be automatically
//! sent by the standard USB read request function.
//!
bool usb_user_read_request(U8 type, U8 request)
{
U8 wValue_msb;
U8 wValue_lsb;
// Read wValue
wValue_lsb = Usb_read_endpoint_data(EP_CONTROL, 8);
wValue_msb = Usb_read_endpoint_data(EP_CONTROL, 8);
/*
U8 descriptor_type;
Usb_read_endpoint_data(EP_CONTROL, 8); // string_type
descriptor_type = Usb_read_endpoint_data(EP_CONTROL, 8);
*/
//** Specific request from Class HID
if( 0x81 == type ) // USB_SETUP_GET_STAND_INTERFACE
{
switch( request )
{
case GET_DESCRIPTOR:
switch( wValue_msb ) // Descriptor ID
{
#if (USB_HIGH_SPEED_SUPPORT==false)
case HID_DESCRIPTOR:
hid_get_descriptor(
sizeof(usb_conf_desc_fs.hid)
, (const U8*)&usb_conf_desc_fs.hid);
return true;
#else
case HID_DESCRIPTOR:
if( Is_usb_full_speed_mode() )
{
hid_get_descriptor(
sizeof(usb_conf_desc_fs.hid)
, (const U8*)&usb_conf_desc_fs.hid);
}else{
hid_get_descriptor(
sizeof(usb_conf_desc_hs.hid_mouse)
, (const U8*)&usb_conf_desc_hs.hid);
}
return true;
#endif
case HID_REPORT_DESCRIPTOR:
hid_get_descriptor(
sizeof(usb_hid_report_descriptor)
, usb_hid_report_descriptor);
return true;
case HID_PHYSICAL_DESCRIPTOR:
// TODO
break;
}
break;
}
}
if( 0x21 == type ) // USB_SETUP_SET_CLASS_INTER
{
switch( request )
{
case HID_SET_REPORT:
// The MSB wValue field specifies the Report Type
// The LSB wValue field specifies the Report ID
switch (wValue_msb)
{
case HID_REPORT_INPUT:
// TODO
break;
case HID_REPORT_OUTPUT:
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
return true;
case HID_REPORT_FEATURE:
usb_hid_set_report_feature();
return true;
break;
}
break;
case HID_SET_IDLE:
usb_hid_set_idle(wValue_lsb, wValue_msb);
return true;
case HID_SET_PROTOCOL:
// TODO
break;
}
}
if( 0xA1 == type ) // USB_SETUP_GET_CLASS_INTER
{
switch( request )
{
case HID_GET_REPORT:
// TODO
break;
case HID_GET_IDLE:
usb_hid_get_idle(wValue_lsb);
return true;
case HID_GET_PROTOCOL:
// TODO
break;
}
}
return false; // No supported request
}
//! This function reads the SETUP request sent to the default control endpoint
//! and calls the appropriate function. When exiting of the usb_read_request
//! function, the device is ready to manage the next request.
//!
//! If the received request is not supported or a non-standard USB request, the function
//! will call the custom decoding function in usb_specific_request module.
//!
//! @note List of supported requests:
//! GET_DESCRIPTOR
//! GET_CONFIGURATION
//! SET_ADDRESS
//! SET_CONFIGURATION
//! CLEAR_FEATURE
//! SET_FEATURE
//! GET_STATUS
//!
void usb_process_request(void)
{
U8 bRequest;
Usb_reset_endpoint_fifo_access(EP_CONTROL);
bmRequestType = Usb_read_endpoint_data(EP_CONTROL, 8);
bRequest = Usb_read_endpoint_data(EP_CONTROL, 8);
switch (bRequest)
{
case GET_DESCRIPTOR:
if (bmRequestType == 0x80) usb_get_descriptor();
else goto unsupported_request;
break;
case GET_CONFIGURATION:
if (bmRequestType == 0x80) usb_get_configuration();
else goto unsupported_request;
break;
case SET_ADDRESS:
if (bmRequestType == 0x00) usb_set_address();
else goto unsupported_request;
break;
case SET_CONFIGURATION:
if (bmRequestType == 0x00) usb_set_configuration();
else goto unsupported_request;
break;
case CLEAR_FEATURE:
if (bmRequestType <= 0x02) usb_clear_feature();
else goto unsupported_request;
break;
case SET_FEATURE:
if (bmRequestType <= 0x02) usb_set_feature();
else goto unsupported_request;
break;
case GET_STATUS:
if (0x7F < bmRequestType && bmRequestType <= 0x82) usb_get_status();
else goto unsupported_request;
break;
case GET_INTERFACE:
if (bmRequestType == 0x81)
{
if(!usb_get_interface())
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
}
else goto unsupported_request;
break;
case SET_INTERFACE:
if (bmRequestType == 0x01) usb_set_interface();
else goto unsupported_request;
break;
case SET_DESCRIPTOR:
case SYNCH_FRAME:
default: //!< unsupported request => call to user read request
unsupported_request:
if (!usb_user_read_request(bmRequestType, bRequest))
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
break;
}
}
//! This function manages the GET DESCRIPTOR request. The device descriptor,
//! the configuration descriptor and the device qualifier are supported. All
//! other descriptors must be supported by the usb_user_get_descriptor
//! function.
//! Only 1 configuration is supported.
//!
void usb_get_descriptor(void)
{
Bool zlp;
U16 wLength;
U8 descriptor_type;
U8 string_type;
Union32 temp;
zlp = FALSE; /* no zero length packet */
string_type = Usb_read_endpoint_data(EP_CONTROL, 8); /* read LSB of wValue */
descriptor_type = Usb_read_endpoint_data(EP_CONTROL, 8); /* read MSB of wValue */
switch (descriptor_type)
{
case DEVICE_DESCRIPTOR:
data_to_transfer = Usb_get_dev_desc_length(); //!< sizeof(usb_dev_desc);
pbuffer = Usb_get_dev_desc_pointer();
break;
case CONFIGURATION_DESCRIPTOR:
data_to_transfer = Usb_get_conf_desc_length(); //!< sizeof(usb_conf_desc);
pbuffer = Usb_get_conf_desc_pointer();
break;
default:
if (!usb_user_get_descriptor(descriptor_type, string_type))
{
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
return;
}
break;
}
temp.u32 = Usb_read_endpoint_data(EP_CONTROL, 32); //!< read wIndex and wLength with a 32-bit access
//!< since this access is aligned with a 32-bit
//!< boundary from the beginning of the endpoint
wLength = usb_format_usb_to_mcu_data(16, temp.u16[1]); //!< ignore wIndex, keep and format wLength
Usb_ack_setup_received_free(); //!< clear the setup received flag
if (wLength > data_to_transfer)
{
zlp = !(data_to_transfer % EP_CONTROL_LENGTH); //!< zero length packet condition
}
else
{
// No need to test ZLP sending since we send the exact number of bytes as
// expected by the host.
data_to_transfer = (U8)wLength; //!< send only requested number of data bytes
}
Usb_ack_nak_out(EP_CONTROL);
while (data_to_transfer && !Is_usb_nak_out(EP_CONTROL))
{
while (!Is_usb_control_in_ready() && !Is_usb_nak_out(EP_CONTROL));
if (Is_usb_nak_out(EP_CONTROL))
break; // don't clear the flag now, it will be cleared after
Usb_reset_endpoint_fifo_access(EP_CONTROL);
data_to_transfer = usb_write_ep_txpacket(EP_CONTROL, pbuffer,
data_to_transfer, &pbuffer);
if (Is_usb_nak_out(EP_CONTROL))
break;
else
Usb_ack_control_in_ready_send(); //!< Send data until necessary
}
if (zlp && !Is_usb_nak_out(EP_CONTROL))
{
while (!Is_usb_control_in_ready());
Usb_ack_control_in_ready_send();
}
while (!Is_usb_nak_out(EP_CONTROL));
Usb_ack_nak_out(EP_CONTROL);
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
}
//! This function is called by the standard USB read request function when
//! the USB request is not supported. This function returns TRUE when the
//! request is processed. This function returns FALSE if the request is not
//! supported. In this case, a STALL handshake will be automatically
//! sent by the standard USB read request function.
//!
Bool uac2_user_read_request(U8 type, U8 request)
{ int i;
// Read wValue
// why are these file statics?
wValue_lsb = Usb_read_endpoint_data(EP_CONTROL, 8);
wValue_msb = Usb_read_endpoint_data(EP_CONTROL, 8);
wIndex = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
wLength = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
if (type == IN_CL_INTERFACE || type == OUT_CL_INTERFACE){ // process Class Specific Interface
// request for AUDIO interfaces
if (wIndex == DSC_INTERFACE_AS){ // Audio Streaming Interface
if (type == IN_CL_INTERFACE){ // get controls
if (wValue_msb == AUDIO_AS_VAL_ALT_SETTINGS && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x01);
Usb_write_endpoint_data(EP_CONTROL, 8, 0b00000011); // alt 0 and 1 valid
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else if (wValue_msb == AUDIO_AS_ACT_ALT_SETTINGS && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, usb_alternate_setting);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else if (wValue_msb == AUDIO_AS_AUDIO_DATA_FORMAT && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x01);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00); // only PCM format
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
} else if (type == OUT_CL_INTERFACE){ // set controls
if (wValue_msb == AUDIO_AS_ACT_ALT_SETTINGS
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_reset_endpoint_fifo_access(EP_CONTROL);
usb_alternate_setting = Usb_read_endpoint_data(EP_CONTROL, 8);
usb_alternate_setting_changed = TRUE;
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_in_ready()); //!< waits for status phase done
return FALSE;
}
} // end OUT_CL_INTERFACE
} // end DSC_INTERFACE_AS
if (wIndex == DSC_INTERFACE_AS_OUT){ // Playback Audio Streaming Interface
if (type == IN_CL_INTERFACE){ // get controls
if (wValue_msb == AUDIO_AS_VAL_ALT_SETTINGS && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x01);
Usb_write_endpoint_data(EP_CONTROL, 8, 0b00000011); // alt 0 and 1 valid
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else if (wValue_msb == AUDIO_AS_ACT_ALT_SETTINGS && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, usb_alternate_setting_out);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else if (wValue_msb == AUDIO_AS_AUDIO_DATA_FORMAT && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x01);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00); // only PCM format
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
} else if (type == OUT_CL_INTERFACE){ // set controls
if (wValue_msb == AUDIO_AS_ACT_ALT_SETTINGS
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_reset_endpoint_fifo_access(EP_CONTROL);
usb_alternate_setting_out = Usb_read_endpoint_data(EP_CONTROL, 8);
usb_alternate_setting_out_changed = TRUE;
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_in_ready()); //!< waits for status phase done
return FALSE;
}
} // end OUT_CL_INTERFACE
} // end DSC_INTERFACE_AS_OUT
if ( (wIndex % 256) == DSC_INTERFACE_AUDIO){// low byte wIndex is Interface number
// high byte is for EntityID
if (type == IN_CL_INTERFACE){ // get controls
switch (wIndex /256){
case CSD_ID_1:
if (wValue_msb == AUDIO_CS_CONTROL_SAM_FREQ && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[3]); // 0x0000bb80 is 48khz
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[2]); // 0x00017700 is 96khz
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[1]); // 0x0002ee00 is 192khz
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[0]);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
}
else if (wValue_msb == AUDIO_CS_CONTROL_CLOCK_VALID && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, TRUE); // always valid
// temp hack to give total # of bytes requested
for (i = 0; i < (wLength - 1); i++)
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
}
else if (wValue_msb == AUDIO_CS_CONTROL_SAM_FREQ && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_RANGE){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
// give total # of bytes requested
for (i = 0; i < (wLength); i++){
if (FEATURE_DAC_ES9022)
Usb_write_endpoint_data(EP_CONTROL, 8, Speedx_1[i]);
else Usb_write_endpoint_data(EP_CONTROL, 8, Speedx_2[i]);
}
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
case CSD_ID_2:
if (wValue_msb == AUDIO_CS_CONTROL_SAM_FREQ && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[3]); // 0x0000bb80 is 48khz
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[2]); // 0x00017700 is 96khz
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[1]); // 0x0002ee00 is 192khz
Usb_write_endpoint_data(EP_CONTROL, 8, current_freq.freq_bytes[0]);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
}
else if (wValue_msb == AUDIO_CS_CONTROL_CLOCK_VALID && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, TRUE); // always valid
// temp hack to give total # of bytes requested
for (i = 0; i < (wLength - 1); i++)
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
}
else if (wValue_msb == AUDIO_CS_CONTROL_SAM_FREQ && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_RANGE){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
// give total # of bytes requested
for (i = 0; i < (wLength); i++)
Usb_write_endpoint_data(EP_CONTROL, 8, Speedx_2[i]);
// LED_Toggle(LED0);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
case CSX_ID:
if (wValue_msb == AUDIO_CX_CLOCK_SELECTOR && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, clock_selected);
// temp hack to give total # of bytes requested
for (i = 0; i < (wLength - 1); i++)
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
case MIC_FEATURE_UNIT_ID:
if (wValue_msb == AUDIO_FU_CONTROL_CS_MUTE
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, mute);
// temp hack to give total # of bytes requested
for (i = 0; i < (wLength - 1); i++)
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
case SPK_FEATURE_UNIT_ID:
if (wValue_msb == AUDIO_FU_CONTROL_CS_MUTE
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
Usb_write_endpoint_data(EP_CONTROL, 8, spk_mute);
// temp hack to give total # of bytes requested
for (i = 0; i < (wLength - 1); i++)
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
case INPUT_TERMINAL_ID:
if (wValue_msb == AUDIO_TE_CONTROL_CS_CLUSTER && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
if (usb_alternate_setting == 1) {
Usb_write_endpoint_data(EP_CONTROL, 8, INPUT_TERMINAL_NB_CHANNELS);
Usb_write_endpoint_data(EP_CONTROL, 8, (U8) INPUT_TERMINAL_CHANNEL_CONF);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, INPUT_TERMINAL_STRING_DESC);
}
else { // zero's at startup alt setting 0
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
};
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
case SPK_INPUT_TERMINAL_ID:
if (wValue_msb == AUDIO_TE_CONTROL_CS_CLUSTER && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
Usb_reset_endpoint_fifo_access(EP_CONTROL);
if (usb_alternate_setting_out == 1) {
Usb_write_endpoint_data(EP_CONTROL, 8, SPK_INPUT_TERMINAL_NB_CHANNELS);
Usb_write_endpoint_data(EP_CONTROL, 8, (U8) SPK_INPUT_TERMINAL_CHANNEL_CONF);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, INPUT_TERMINAL_STRING_DESC);
}
else { // zero's at startup alt setting 0
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
Usb_write_endpoint_data(EP_CONTROL, 8, 0x00);
};
Usb_ack_control_in_ready_send();
while (!Is_usb_control_out_received());
Usb_ack_control_out_received_free();
return TRUE;
} else return FALSE;
default:
return FALSE;
} // end switch EntityID
} else if (type == OUT_CL_INTERFACE){ // set controls
switch (wIndex /256){
case CSD_ID_1: // set CUR freq
case CSD_ID_2:
if (wValue_msb == AUDIO_CS_CONTROL_SAM_FREQ && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_reset_endpoint_fifo_access(EP_CONTROL);
current_freq.freq_bytes[3]=Usb_read_endpoint_data(EP_CONTROL, 8); // read 4 bytes freq to set
current_freq.freq_bytes[2]=Usb_read_endpoint_data(EP_CONTROL, 8);
current_freq.freq_bytes[1]=Usb_read_endpoint_data(EP_CONTROL, 8);
current_freq.freq_bytes[0]=Usb_read_endpoint_data(EP_CONTROL, 8);
freq_changed = TRUE;
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_in_ready()); //!< waits for status phase done
return TRUE;
}
else return FALSE;
case CSX_ID:
if (wValue_msb == AUDIO_CX_CLOCK_SELECTOR && wValue_lsb == 0
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_reset_endpoint_fifo_access(EP_CONTROL);
clock_selected = Usb_read_endpoint_data(EP_CONTROL, 8);
clock_changed = TRUE;
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_in_ready()); //!< waits for status phase done
if (clock_selected < 1 || clock_selected > CSX_INPUT_PINS)
clock_selected = 1;
return TRUE;
} else return FALSE;
case MIC_FEATURE_UNIT_ID:
if (wValue_msb == AUDIO_FU_CONTROL_CS_MUTE
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_reset_endpoint_fifo_access(EP_CONTROL);
mute = Usb_read_endpoint_data(EP_CONTROL, 8);
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_in_ready()); //!< waits for status phase done
return TRUE;
} else return FALSE;
case SPK_FEATURE_UNIT_ID:
if (wValue_msb == AUDIO_FU_CONTROL_CS_MUTE
&& request == AUDIO_CS_REQUEST_CUR){
Usb_ack_setup_received_free();
while (!Is_usb_control_out_received());
Usb_reset_endpoint_fifo_access(EP_CONTROL);
spk_mute = Usb_read_endpoint_data(EP_CONTROL, 8);
Usb_ack_control_out_received_free();
Usb_ack_control_in_ready_send(); //!< send a ZLP for STATUS phase
while (!Is_usb_control_in_ready()); //!< waits for status phase done
return TRUE;
} else return FALSE;
default:
return FALSE;
}
} // end OUT_CL_INTERFACE
} // end Audio Control Interface
} // end CL_INTERFACE
return FALSE; // No supported request
}
//! This function manages the SET INTERFACE request.
//!
void usb_set_interface(void)
{
U8 u8_i;
// wValue = Alternate Setting
// wIndex = Interface
U16 wValue = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
U16 wIndex = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
Usb_ack_setup_received_free();
// Get descriptor
#if (USB_HIGH_SPEED_SUPPORT==true)
if( Is_usb_full_speed_mode() )
{
data_to_transfer = Usb_get_conf_desc_fs_length(); //!< sizeof(usb_conf_desc_fs);
pbuffer = Usb_get_conf_desc_fs_pointer();
}else{
data_to_transfer = Usb_get_conf_desc_hs_length(); //!< sizeof(usb_conf_desc_hs);
pbuffer = Usb_get_conf_desc_hs_pointer();
}
#else
data_to_transfer = Usb_get_conf_desc_length(); //!< sizeof(usb_conf_desc);
pbuffer = Usb_get_conf_desc_pointer();
#endif
//** Scan descriptor
//* Find configuration selected
if( usb_configuration_nb == 0 )
{
// No configuration selected then no interface enable
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
return;
}
u8_i = usb_configuration_nb;
while( u8_i != 0 )
{
if( CONFIGURATION_DESCRIPTOR != ((S_usb_configuration_descriptor*)pbuffer)->bDescriptorType )
{
data_to_transfer -= ((S_usb_configuration_descriptor*)pbuffer)->bLength;
pbuffer = (U8*)pbuffer + ((S_usb_configuration_descriptor*)pbuffer)->bLength;
continue;
}
u8_i--;
if( u8_i != 0 )
{
data_to_transfer -= ((S_usb_configuration_descriptor*)pbuffer)->wTotalLength;
pbuffer = (U8*)pbuffer + ((S_usb_configuration_descriptor*)pbuffer)->wTotalLength;
}
}
// Find interface selected
if( wIndex >= ((S_usb_configuration_descriptor*)pbuffer)->bNumInterfaces )
{
// Interface number unknown
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
return;
}
while( 1 )
{
if( data_to_transfer <= ((S_usb_interface_descriptor*)pbuffer)->bLength )
{
// Interface unknown
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
return;
}
data_to_transfer -= ((S_usb_interface_descriptor*)pbuffer)->bLength;
pbuffer = (U8*)pbuffer + ((S_usb_interface_descriptor*)pbuffer)->bLength;
if( INTERFACE_DESCRIPTOR != ((S_usb_interface_descriptor*)pbuffer)->bDescriptorType )
continue;
if( wIndex != ((S_usb_interface_descriptor*)pbuffer)->bInterfaceNumber )
continue;
if( wValue != ((S_usb_interface_descriptor*)pbuffer)->bAlternateSetting )
continue;
usb_interface_status[wIndex] = wValue;
break;
}
//* Find endpoints of interface and reset it
while( 1 )
{
if( data_to_transfer <= ((S_usb_endpoint_descriptor*)pbuffer)->bLength )
break; // End of interface
data_to_transfer -= ((S_usb_endpoint_descriptor*)pbuffer)->bLength;
pbuffer = (U8*)pbuffer + ((S_usb_endpoint_descriptor*)pbuffer)->bLength;
if( INTERFACE_DESCRIPTOR == ((S_usb_endpoint_descriptor*)pbuffer)->bDescriptorType )
break; // End of interface
if( ENDPOINT_DESCRIPTOR == ((S_usb_endpoint_descriptor*)pbuffer)->bDescriptorType )
{
// Reset endpoint
u8_i = ((S_usb_endpoint_descriptor*)pbuffer)->bEndpointAddress & (~MSK_EP_DIR);
Usb_disable_stall_handshake(u8_i);
Usb_reset_endpoint(u8_i);
Usb_reset_data_toggle(u8_i);
}
}
// send a ZLP for STATUS phase
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
}
void cdc_set_control_line_state (void)
{
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
}
//! This function manages the SET FEATURE request. The USB test modes are
//! supported by this function.
//!
void usb_set_feature(void)
{
U16 wValue = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
U16 wIndex = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
U16 wLength = usb_format_usb_to_mcu_data(16, Usb_read_endpoint_data(EP_CONTROL, 16));
if (wLength)
goto unsupported_request;
if (bmRequestType==USB_SETUP_SET_STAND_DEVICE) {
#if (USB_REMOTE_WAKEUP_FEATURE == true)
if (FEATURE_DEVICE_REMOTE_WAKEUP == wValue)
{
device_status |= USB_DEV_STATUS_REMOTEWAKEUP;
remote_wakeup_feature = true;
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
return;
}
#endif
goto unsupported_request;
}
switch (wValue)
{
case FEATURE_ENDPOINT_HALT:
wIndex = Get_desc_ep_nbr(wIndex); // clear direction flag
if (bmRequestType != ENDPOINT_TYPE ||
wIndex == EP_CONTROL ||
!Is_usb_endpoint_enabled(wIndex))
goto unsupported_request;
Usb_enable_stall_handshake(wIndex);
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
break;
#if (USB_HIGH_SPEED_SUPPORT==true)
case FEATURE_TEST_MODE:
if (bmRequestType != DEVICE_TYPE ||
wIndex & 0x00FF)
goto unsupported_request;
switch (wIndex >> 8)
{
case TEST_J:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_TSTJ_MASK);
break;
case TEST_K:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_TSTK_MASK);
break;
case TEST_SE0_NAK:
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
break;
case TEST_PACKET:
{
static const U8 test_packet[] =
{
// 00000000 * 9
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// 01010101 * 8
0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
// 01110111 * 8
0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
// 0, {111111S * 15}, 111111
0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// S, 111111S, {0111111S * 7}
0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
// 00111111, {S0111111 * 9}, S0
0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
};
Usb_ack_setup_received_free();
Usb_ack_control_in_ready_send();
while (!Is_usb_control_in_ready());
Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_SPDCONF_MASK, 2);
Usb_disable_endpoint(EP_CONTROL);
Usb_unallocate_memory(EP_CONTROL);
(void)Usb_configure_endpoint(EP_CONTROL,
TYPE_BULK,
DIRECTION_IN,
64,
SINGLE_BANK);
Usb_reset_endpoint(EP_CONTROL);
Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_TSTPCKT_MASK);
usb_write_ep_txpacket(EP_CONTROL, &test_packet, sizeof(test_packet), NULL);
Usb_send_in(EP_CONTROL);
}
break;
case TEST_FORCE_ENABLE: // Only for downstream facing hub ports
default:
goto unsupported_request;
}
break;
#endif
case FEATURE_DEVICE_REMOTE_WAKEUP:
default:
goto unsupported_request;
}
return;
unsupported_request:
Usb_enable_stall_handshake(EP_CONTROL);
Usb_ack_setup_received_free();
}
