C++ (Cpp) VIRTUAL_IF_UP Beispiele

Beispiel #1

Datei: ap_mbss.c Projekt: qwerty1023/wive-rtnl-firmware

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
	pDev			which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_Open(
	IN	PNET_DEV	pDev)
{
	PRTMP_ADAPTER pAd;
	INT BssId;

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	BssId = RT28xx_MBSS_IdxGet(pAd, pDev);
    if (BssId < 0)
        return -1;
    
    pAd->ApCfg.MBSSID[BssId].bBcnSntReq = TRUE;

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	RTMP_OS_NETDEV_START_QUEUE(pDev);

	return 0;
} /* End of MBSS_VirtualIF_Open */

Beispiel #2

Datei: rt_main_dev.c Projekt: jing-git/rt-n56u

/*
========================================================================
Routine Description:
    Open raxx interface.

Arguments:
	*net_dev			the raxx interface pointer

Return Value:
    0					Open OK
	otherwise			Open Fail

Note:
	1. if open fail, kernel will not call the close function.
	2. Free memory for
		(1) Mlme Memory Handler:		MlmeHalt()
		(2) TX & RX:					RTMPFreeTxRxRingMemory()
		(3) BA Reordering: 				ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_open(IN struct net_device *net_dev)
{
    RTMP_ADAPTER *pAd = NULL;

	GET_PAD_FROM_NET_DEV(pAd, net_dev);	

	// Sanity check for pAd
	if (pAd == NULL)
		return 0; // close ok

#ifdef CONFIG_AP_SUPPORT
	pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = TRUE;
#endif // CONFIG_AP_SUPPORT //
	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	// increase MODULE use count
	RT_MOD_INC_USE_COUNT();

	netif_start_queue(net_dev);
	netif_carrier_on(net_dev);
	netif_wake_queue(net_dev);

	return 0;
}

Beispiel #3

Datei: ap_apcli_inf.c Projekt: qwerty1023/wive-rtnl-firmware

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT ApCli_VirtualIF_Open(
	IN PNET_DEV		dev_p)
{
	UCHAR ifIndex;
	PRTMP_ADAPTER pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	// increase MODULE use count
	RT_MOD_INC_USE_COUNT();

	for (ifIndex = 0; ifIndex < MAX_APCLI_NUM; ifIndex++)
	{
		if (pAd->ApCfg.ApCliTab[ifIndex].dev == dev_p)
		{
			RTMP_OS_NETDEV_START_QUEUE(dev_p);
			ApCliIfUp(pAd);
		}
	}

	return 0;
} /* End of ApCli_VirtualIF_Open */

Beispiel #4

Datei: usb_main_dev.c Projekt: 83GTIGuy/openwrtSDN

static int rtusb_probe (struct usb_interface *intf,
						const USB_DEVICE_ID *id)
{	
	VOID *pAd;
	struct usb_device *dev;
	int rv;

	dev = interface_to_usbdev(intf);
	dev = usb_get_dev(dev);
	
	rv = rt2870_probe(intf, dev, id, &pAd);
	if (rv != 0)
	{
		usb_put_dev(dev);
	}
#ifdef IFUP_IN_PROBE
	else
	{
		if (VIRTUAL_IF_UP(pAd) != 0)
		{
			pAd = usb_get_intfdata(intf);
			usb_set_intfdata(intf, NULL);
			rt2870_disconnect(dev, pAd);
			rv = -ENOMEM;
		}
	}
#endif /* IFUP_IN_PROBE */	
	return rv;
}

Beispiel #5

Datei: p2p_inf.c Projekt: vision8520/kernel-amlogic-mx

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
int P2P_VirtualIF_Open(
    IN PNET_DEV		dev_p)
{
    VOID *pAd;
    /*PMULTISSID_STRUCT	pMbss; */

    pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
    ASSERT(pAd);

    DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

    if (RTMP_COM_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_P2P_OPEN_PRE, 0,
                             dev_p, 0) != NDIS_STATUS_SUCCESS)
        return -1;

    if (VIRTUAL_IF_UP(pAd) != 0)
        return -1;

    /* increase MODULE use count */
    RT_MOD_INC_USE_COUNT();

    RTMP_OS_NETDEV_START_QUEUE(dev_p);

    if (RTMP_COM_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_P2P_OPEN_POST, 0,
                             dev_p, 0) != NDIS_STATUS_SUCCESS)
        return -1;

    DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

    return 0;
}

Beispiel #6

Datei: usb_main_dev.c Projekt: pocketbook/U7

static void rt2870_late_resume(struct early_suspend *early)
{
        PRTMP_ADAPTER   pAd = container_of(early, RTMP_ADAPTER, early_suspend);
        DBGPRINT(RT_DEBUG_ERROR, ("%s\n", __func__));

	if (late_resume_flag == TRUE){
		printk("late_resume_flag is TRUE!!!\n");
		if (VIRTUAL_IF_UP((VOID *)pAd) != 0)
                {
			printk("%s, VIRTUAL_IF_UP != 0, WTF!!!!\n", __func__);
                }
		late_resume_flag = FALSE;
	}
}

Beispiel #7

Datei: ap_wds_inf.c Projekt: 23171580/ralink

INT WdsVirtualIF_open(PNET_DEV dev)
{
	VOID *pAd;


	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: ===> VirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();
	
	RTMP_OS_NETDEV_START_QUEUE(dev);
	return 0;
}

Beispiel #8

Datei: ap_wds_inf.c Projekt: jing-git/rt-n56u

INT WdsVirtualIF_open(
    IN	PNET_DEV dev)
{
    VOID			*pAd;

    DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> VirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));


    pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
    if (VIRTUAL_IF_UP(pAd) != 0)
        return -1;

    /* increase MODULE use count */
    RT_MOD_INC_USE_COUNT();

    RTMP_OS_NETDEV_START_QUEUE(dev);
    return 0;
}

Beispiel #9

Datei: rt_main_dev.c Projekt: mikuhatsune001/linux2.6.32

/*
========================================================================
Routine Description:
    Open raxx interface.

Arguments:
	*net_dev			the raxx interface pointer

Return Value:
    0					Open OK
	otherwise			Open Fail

Note:
	1. if open fail, kernel will not call the close function.
	2. Free memory for
		(1) Mlme Memory Handler:		MlmeHalt()
		(2) TX & RX:					RTMPFreeTxRxRingMemory()
		(3) BA Reordering:				ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_open(IN struct net_device *net_dev)
{
    RTMP_ADAPTER *pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);

	// Sanity check for pAd
	if (pAd == NULL)
		return 0; // close ok

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	// increase MODULE use count
	RT_MOD_INC_USE_COUNT();

	netif_start_queue(net_dev);
	netif_carrier_on(net_dev);
	netif_wake_queue(net_dev);

	return 0;
}

Beispiel #10

Datei: ap_apcli_inf.c Projekt: andy-padavan/rt-n56u

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT ApCli_VirtualIF_Open(PNET_DEV dev_p)
{
	VOID *pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();


	RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_APC_OPEN, 0, dev_p, 0);

	return 0;
}

Beispiel #11

int MainVirtualIF_open(IN struct net_device *net_dev)
{
    RTMP_ADAPTER *pAd = net_dev->ml_priv;

	
	if (pAd == NULL)
		return 0; 

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	
	RT_MOD_INC_USE_COUNT();

	netif_start_queue(net_dev);
	netif_carrier_on(net_dev);
	netif_wake_queue(net_dev);

	return 0;
}

Beispiel #12

Datei: ap_mbss_inf.c Projekt: ulli-kroll/mt7612u

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
	pDev			which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_Open(struct net_device *pDev)
{
	VOID *pAd;


	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);

	RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_MBSS_OPEN, 0, pDev, 0);

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	RTMP_OS_NETDEV_START_QUEUE(pDev);

	return 0;
}

Beispiel #13

/*
========================================================================
Routine Description:
    Open raxx interface.

Arguments:
	*net_dev			the raxx interface pointer

Return Value:
    0					Open OK
	otherwise			Open Fail

Note:
	1. if open fail, kernel will not call the close function.
	2. Free memory for
		(1) Mlme Memory Handler:		MlmeHalt()
		(2) TX & RX:					RTMPFreeTxRxRingMemory()
		(3) BA Reordering: 				ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_open(IN struct net_device *net_dev)
{
	struct rt_rtmp_adapter *pAd = NULL;

	GET_PAD_FROM_NET_DEV(pAd, net_dev);

	/* Sanity check for pAd */
	if (pAd == NULL)
		return 0;	/* close ok */

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	netif_start_queue(net_dev);
	netif_carrier_on(net_dev);
	netif_wake_queue(net_dev);

	return 0;
}

Beispiel #14

Datei: ap_apcli_inf.c Projekt: 32743069/amlogic_common_3050

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
int ApCli_VirtualIF_Open(
	IN PNET_DEV		dev_p)
{
/*	UCHAR ifIndex; */
	VOID *pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();


	RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_APC_OPEN, 0, dev_p, 0);

	return 0;
} /* End of ApCli_VirtualIF_Open */

Beispiel #15

Datei: ap_wds_inf.c Projekt: qwerty1023/wive-rtnl-firmware

INT WdsVirtualIF_open(
	IN	PNET_DEV dev)
{
	PRTMP_ADAPTER	pAd;
#ifdef RTL865X_SOC
	INT				index;
	unsigned int 	linkid;
#endif

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> VirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));


	pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	// increase MODULE use count
	RT_MOD_INC_USE_COUNT();
	
	RTMP_OS_NETDEV_START_QUEUE(dev);
	return 0;
}