int main(int argc, char *argv[])
{
struct GModule *module;
struct Option *in_opt, *layer_opt, *out_opt, *length_opt, *units_opt, *vertices_opt;
struct Map_info In, Out;
struct line_pnts *Points, *Points2;
struct line_cats *Cats;
int line, nlines, layer;
double length = -1;
int vertices = 0;
double (*line_length) ();
int latlon = 0;
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("geometry"));
module->description = _("Splits vector lines to shorter segments.");
in_opt = G_define_standard_option(G_OPT_V_INPUT);
layer_opt = G_define_standard_option(G_OPT_V_FIELD_ALL);
out_opt = G_define_standard_option(G_OPT_V_OUTPUT);
length_opt = G_define_option();
length_opt->key = "length";
length_opt->type = TYPE_DOUBLE;
length_opt->required = NO;
length_opt->multiple = NO;
length_opt->description = _("Maximum segment length");
units_opt = G_define_option();
units_opt->key = "units";
units_opt->type = TYPE_STRING;
units_opt->required = NO;
units_opt->multiple = NO;
units_opt->options = "meters,kilometers,feet,miles,nautmiles";
units_opt->answer = "meters";
units_opt->description = _("Length units");
vertices_opt = G_define_option();
vertices_opt->key = "vertices";
vertices_opt->type = TYPE_INTEGER;
vertices_opt->required = NO;
vertices_opt->multiple = NO;
vertices_opt->description = _("Maximum number of vertices in segment");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
if ((length_opt->answer && vertices_opt->answer) ||
!(length_opt->answer || vertices_opt->answer))
G_fatal_error(_("Use either length or vertices"));
line_length = NULL;
if (length_opt->answer) {
length = atof(length_opt->answer);
if (length <= 0)
G_fatal_error(_("Length must be positive but is %g"), length);
/* convert length to meters */
if (strcmp(units_opt->answer, "meters") == 0)
/* do nothing */ ;
else if (strcmp(units_opt->answer, "kilometers") == 0)
length *= FROM_KILOMETERS;
else if (strcmp(units_opt->answer, "feet") == 0)
length *= FROM_FEET;
else if (strcmp(units_opt->answer, "miles") == 0)
length *= FROM_MILES;
else if (strcmp(units_opt->answer, "nautmiles") == 0)
length *= FROM_NAUTMILES;
else
G_fatal_error(_("Unknown unit %s"), units_opt->answer);
/* set line length function */
if ((latlon = (G_projection() == PROJECTION_LL)) == 1)
line_length = Vect_line_geodesic_length;
else {
double factor;
line_length = Vect_line_length;
/* convert length to map units */
if ((factor = G_database_units_to_meters_factor()) == 0)
G_fatal_error(_("Can not get projection units"));
else {
/* meters to units */
length = length / factor;
}
}
G_verbose_message(_("length in %s: %g"), (latlon ? "meters" : "map units"), length);
}
if (vertices_opt->answer) {
vertices = atoi(vertices_opt->answer);
if (vertices < 2)
G_fatal_error(_("Number of vertices must be at least 2"));
}
Vect_set_open_level(2);
Vect_open_old2(&In, in_opt->answer, "", layer_opt->answer);
layer = Vect_get_field_number(&In, layer_opt->answer);
Vect_open_new(&Out, out_opt->answer, Vect_is_3d(&In));
Vect_copy_head_data(&In, &Out);
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
Vect_copy_tables(&In, &Out, layer);
Points = Vect_new_line_struct();
Points2 = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
nlines = Vect_get_num_lines(&In);
for (line = 1; line <= nlines; line++) {
int ltype;
G_percent(line, nlines, 1);
if (!Vect_line_alive(&In, line))
continue;
ltype = Vect_read_line(&In, Points, Cats, line);
if (layer != -1 && !Vect_cat_get(Cats, layer, NULL))
continue;
if (ltype & GV_LINES) {
if (length > 0) {
double l, from, to, step;
l = line_length(Points);
if (l <= length) {
Vect_write_line(&Out, ltype, Points, Cats);
}
else {
int n, i;
n = ceil(l / length);
if (latlon)
l = Vect_line_length(Points);
step = l / n;
from = 0.;
for (i = 0; i < n; i++) {
int ret;
double x, y, z;
if (i == n - 1) {
to = l; /* to be sure that it goes to end */
}
else {
to = from + step;
}
ret = Vect_line_segment(Points, from, to, Points2);
if (ret == 0) {
G_warning(_("Unable to make line segment: %f - %f (line length = %f)"),
from, to, l);
continue;
}
/* To be sure that the coordinates are identical */
if (i > 0) {
Points2->x[0] = x;
Points2->y[0] = y;
Points2->z[0] = z;
}
if (i == n - 1) {
Points2->x[Points2->n_points - 1] =
Points->x[Points->n_points - 1];
Points2->y[Points2->n_points - 1] =
Points->y[Points->n_points - 1];
Points2->z[Points2->n_points - 1] =
Points->z[Points->n_points - 1];
}
Vect_write_line(&Out, ltype, Points2, Cats);
/* last point */
x = Points2->x[Points2->n_points - 1];
y = Points2->y[Points2->n_points - 1];
z = Points2->z[Points2->n_points - 1];
from += step;
}
}
}
else {
int start = 0; /* number of coordinates written */
while (start < Points->n_points - 1) {
int i, v;
Vect_reset_line(Points2);
for (i = 0; i < vertices; i++) {
v = start + i;
if (v == Points->n_points)
break;
Vect_append_point(Points2, Points->x[v], Points->y[v],
Points->z[v]);
}
Vect_write_line(&Out, ltype, Points2, Cats);
start = v;
}
}
}
else {
Vect_write_line(&Out, ltype, Points, Cats);
}
}
Vect_close(&In);
Vect_build(&Out);
Vect_close(&Out);
exit(EXIT_SUCCESS);
}
int main(int argc, char *argv[])
{
struct Map_info In, Out, Error;
struct line_pnts *Points;
struct line_cats *Cats;
int i, type, iter;
struct GModule *module; /* GRASS module for parsing arguments */
struct Option *map_in, *map_out, *error_out, *thresh_opt, *method_opt,
*look_ahead_opt;
struct Option *iterations_opt, *cat_opt, *alpha_opt, *beta_opt, *type_opt;
struct Option *field_opt, *where_opt, *reduction_opt, *slide_opt;
struct Option *angle_thresh_opt, *degree_thresh_opt,
*closeness_thresh_opt;
struct Option *betweeness_thresh_opt;
struct Flag *notab_flag, *loop_support_flag;
int with_z;
int total_input, total_output; /* Number of points in the input/output map respectively */
double thresh, alpha, beta, reduction, slide, angle_thresh;
double degree_thresh, closeness_thresh, betweeness_thresh;
int method;
int look_ahead, iterations;
int loop_support;
int layer;
int n_lines;
int simplification, mask_type;
struct cat_list *cat_list = NULL;
char *s, *descriptions;
/* initialize GIS environment */
G_gisinit(argv[0]); /* reads grass env, stores program name to G_program_name() */
/* initialize module */
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("generalization"));
G_add_keyword(_("simplification"));
G_add_keyword(_("smoothing"));
G_add_keyword(_("displacement"));
G_add_keyword(_("network generalization"));
module->description = _("Performs vector based generalization.");
/* Define the different options as defined in gis.h */
map_in = G_define_standard_option(G_OPT_V_INPUT);
field_opt = G_define_standard_option(G_OPT_V_FIELD_ALL);
type_opt = G_define_standard_option(G_OPT_V_TYPE);
type_opt->options = "line,boundary,area";
type_opt->answer = "line,boundary,area";
type_opt->guisection = _("Selection");
map_out = G_define_standard_option(G_OPT_V_OUTPUT);
error_out = G_define_standard_option(G_OPT_V_OUTPUT);
error_out->key = "error";
error_out->required = NO;
error_out->description =
_("Error map of all lines and boundaries not being generalized due to topology issues or over-simplification");
method_opt = G_define_option();
method_opt->key = "method";
method_opt->type = TYPE_STRING;
method_opt->required = YES;
method_opt->multiple = NO;
method_opt->options =
"douglas,douglas_reduction,lang,reduction,reumann,boyle,sliding_averaging,distance_weighting,chaiken,hermite,snakes,network,displacement";
descriptions = NULL;
G_asprintf(&descriptions,
"douglas;%s;"
"douglas_reduction;%s;"
"lang;%s;"
"reduction;%s;"
"reumann;%s;"
"boyle;%s;"
"sliding_averaging;%s;"
"distance_weighting;%s;"
"chaiken;%s;"
"hermite;%s;"
"snakes;%s;"
"network;%s;"
"displacement;%s;",
_("Douglas-Peucker Algorithm"),
_("Douglas-Peucker Algorithm with reduction parameter"),
_("Lang Simplification Algorithm"),
_("Vertex Reduction Algorithm eliminates points close to each other"),
_("Reumann-Witkam Algorithm"),
_("Boyle's Forward-Looking Algorithm"),
_("McMaster's Sliding Averaging Algorithm"),
_("McMaster's Distance-Weighting Algorithm"),
_("Chaiken's Algorithm"),
_("Interpolation by Cubic Hermite Splines"),
_("Snakes method for line smoothing"),
_("Network generalization"),
_("Displacement of lines close to each other"));
method_opt->descriptions = G_store(descriptions);
method_opt->description = _("Generalization algorithm");
thresh_opt = G_define_option();
thresh_opt->key = "threshold";
thresh_opt->type = TYPE_DOUBLE;
thresh_opt->required = YES;
thresh_opt->options = "0-1000000000";
thresh_opt->description = _("Maximal tolerance value");
look_ahead_opt = G_define_option();
look_ahead_opt->key = "look_ahead";
look_ahead_opt->type = TYPE_INTEGER;
look_ahead_opt->required = NO;
look_ahead_opt->answer = "7";
look_ahead_opt->description = _("Look-ahead parameter");
reduction_opt = G_define_option();
reduction_opt->key = "reduction";
reduction_opt->type = TYPE_DOUBLE;
reduction_opt->required = NO;
reduction_opt->answer = "50";
reduction_opt->options = "0-100";
reduction_opt->description =
_("Percentage of the points in the output of 'douglas_reduction' algorithm");
slide_opt = G_define_option();
slide_opt->key = "slide";
slide_opt->type = TYPE_DOUBLE;
slide_opt->required = NO;
slide_opt->answer = "0.5";
slide_opt->options = "0-1";
slide_opt->description =
_("Slide of computed point toward the original point");
angle_thresh_opt = G_define_option();
angle_thresh_opt->key = "angle_thresh";
angle_thresh_opt->type = TYPE_DOUBLE;
angle_thresh_opt->required = NO;
angle_thresh_opt->answer = "3";
angle_thresh_opt->options = "0-180";
angle_thresh_opt->description =
_("Minimum angle between two consecutive segments in Hermite method");
degree_thresh_opt = G_define_option();
degree_thresh_opt->key = "degree_thresh";
degree_thresh_opt->type = TYPE_INTEGER;
degree_thresh_opt->required = NO;
degree_thresh_opt->answer = "0";
degree_thresh_opt->description =
_("Degree threshold in network generalization");
closeness_thresh_opt = G_define_option();
closeness_thresh_opt->key = "closeness_thresh";
closeness_thresh_opt->type = TYPE_DOUBLE;
closeness_thresh_opt->required = NO;
closeness_thresh_opt->answer = "0";
closeness_thresh_opt->options = "0-1";
closeness_thresh_opt->description =
_("Closeness threshold in network generalization");
betweeness_thresh_opt = G_define_option();
betweeness_thresh_opt->key = "betweeness_thresh";
betweeness_thresh_opt->type = TYPE_DOUBLE;
betweeness_thresh_opt->required = NO;
betweeness_thresh_opt->answer = "0";
betweeness_thresh_opt->description =
_("Betweeness threshold in network generalization");
alpha_opt = G_define_option();
alpha_opt->key = "alpha";
alpha_opt->type = TYPE_DOUBLE;
alpha_opt->required = NO;
alpha_opt->answer = "1.0";
alpha_opt->description = _("Snakes alpha parameter");
beta_opt = G_define_option();
beta_opt->key = "beta";
beta_opt->type = TYPE_DOUBLE;
beta_opt->required = NO;
beta_opt->answer = "1.0";
beta_opt->description = _("Snakes beta parameter");
iterations_opt = G_define_option();
iterations_opt->key = "iterations";
iterations_opt->type = TYPE_INTEGER;
iterations_opt->required = NO;
iterations_opt->answer = "1";
iterations_opt->description = _("Number of iterations");
cat_opt = G_define_standard_option(G_OPT_V_CATS);
cat_opt->guisection = _("Selection");
where_opt = G_define_standard_option(G_OPT_DB_WHERE);
where_opt->guisection = _("Selection");
loop_support_flag = G_define_flag();
loop_support_flag->key = 'l';
loop_support_flag->label = _("Disable loop support");
loop_support_flag->description = _("Do not modify end points of lines forming a closed loop");
notab_flag = G_define_standard_flag(G_FLG_V_TABLE);
notab_flag->description = _("Do not copy attributes");
notab_flag->guisection = _("Attributes");
/* options and flags parser */
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
thresh = atof(thresh_opt->answer);
look_ahead = atoi(look_ahead_opt->answer);
alpha = atof(alpha_opt->answer);
beta = atof(beta_opt->answer);
reduction = atof(reduction_opt->answer);
iterations = atoi(iterations_opt->answer);
slide = atof(slide_opt->answer);
angle_thresh = atof(angle_thresh_opt->answer);
degree_thresh = atof(degree_thresh_opt->answer);
closeness_thresh = atof(closeness_thresh_opt->answer);
betweeness_thresh = atof(betweeness_thresh_opt->answer);
mask_type = type_mask(type_opt);
G_debug(3, "Method: %s", method_opt->answer);
s = method_opt->answer;
if (strcmp(s, "douglas") == 0)
method = DOUGLAS;
else if (strcmp(s, "lang") == 0)
method = LANG;
else if (strcmp(s, "reduction") == 0)
method = VERTEX_REDUCTION;
else if (strcmp(s, "reumann") == 0)
method = REUMANN;
else if (strcmp(s, "boyle") == 0)
method = BOYLE;
else if (strcmp(s, "distance_weighting") == 0)
method = DISTANCE_WEIGHTING;
else if (strcmp(s, "chaiken") == 0)
method = CHAIKEN;
else if (strcmp(s, "hermite") == 0)
method = HERMITE;
else if (strcmp(s, "snakes") == 0)
method = SNAKES;
else if (strcmp(s, "douglas_reduction") == 0)
method = DOUGLAS_REDUCTION;
else if (strcmp(s, "sliding_averaging") == 0)
method = SLIDING_AVERAGING;
else if (strcmp(s, "network") == 0)
method = NETWORK;
else if (strcmp(s, "displacement") == 0) {
method = DISPLACEMENT;
/* we can displace only the lines */
mask_type = GV_LINE;
}
else {
G_fatal_error(_("Unknown method"));
exit(EXIT_FAILURE);
}
/* simplification or smoothing? */
switch (method) {
case DOUGLAS:
case DOUGLAS_REDUCTION:
case LANG:
case VERTEX_REDUCTION:
case REUMANN:
simplification = 1;
break;
default:
simplification = 0;
break;
}
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
Vect_check_input_output_name(map_in->answer, map_out->answer,
G_FATAL_EXIT);
Vect_set_open_level(2);
if (Vect_open_old2(&In, map_in->answer, "", field_opt->answer) < 1)
G_fatal_error(_("Unable to open vector map <%s>"), map_in->answer);
if (Vect_get_num_primitives(&In, mask_type) == 0) {
G_warning(_("No lines found in input map <%s>"), map_in->answer);
Vect_close(&In);
exit(EXIT_SUCCESS);
}
with_z = Vect_is_3d(&In);
if (0 > Vect_open_new(&Out, map_out->answer, with_z)) {
Vect_close(&In);
G_fatal_error(_("Unable to create vector map <%s>"), map_out->answer);
}
if (error_out->answer) {
if (0 > Vect_open_new(&Error, error_out->answer, with_z)) {
Vect_close(&In);
G_fatal_error(_("Unable to create error vector map <%s>"), error_out->answer);
}
}
Vect_copy_head_data(&In, &Out);
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
total_input = total_output = 0;
layer = Vect_get_field_number(&In, field_opt->answer);
/* parse filter options */
if (layer > 0)
cat_list = Vect_cats_set_constraint(&In, layer,
where_opt->answer, cat_opt->answer);
if (method == DISPLACEMENT) {
/* modifies only lines, all other features including boundaries are preserved */
/* options where, cats, and layer are respected */
G_message(_("Displacement..."));
snakes_displacement(&In, &Out, thresh, alpha, beta, 1.0, 10.0,
iterations, cat_list, layer);
}
/* TODO: rearrange code below. It's really messy */
if (method == NETWORK) {
/* extracts lines of selected type, all other features are discarded */
/* options where, cats, and layer are ignored */
G_message(_("Network generalization..."));
total_output =
graph_generalization(&In, &Out, mask_type, degree_thresh,
closeness_thresh, betweeness_thresh);
}
/* copy tables here because method == NETWORK is complete and
* tables for Out may be needed for parse_filter_options() below */
if (!notab_flag->answer) {
if (method == NETWORK)
copy_tables_by_cats(&In, &Out);
else
Vect_copy_tables(&In, &Out, -1);
}
else if (where_opt->answer && method < NETWORK) {
G_warning(_("Attributes are needed for 'where' option, copying table"));
Vect_copy_tables(&In, &Out, -1);
}
/* smoothing/simplification */
if (method < NETWORK) {
/* modifies only lines of selected type, all other features are preserved */
int not_modified_boundaries = 0, n_oversimplified = 0;
struct line_pnts *APoints; /* original Points */
set_topo_debug();
Vect_copy_map_lines(&In, &Out);
Vect_build_partial(&Out, GV_BUILD_CENTROIDS);
G_message("-----------------------------------------------------");
G_message(_("Generalization (%s)..."), method_opt->answer);
G_message(_("Using threshold: %g %s"), thresh, G_database_unit_name(1));
G_percent_reset();
APoints = Vect_new_line_struct();
n_lines = Vect_get_num_lines(&Out);
for (i = 1; i <= n_lines; i++) {
int after = 0;
G_percent(i, n_lines, 1);
type = Vect_read_line(&Out, APoints, Cats, i);
if (!(type & GV_LINES) || !(mask_type & type))
continue;
if (layer > 0) {
if ((type & GV_LINE) &&
!Vect_cats_in_constraint(Cats, layer, cat_list))
continue;
else if ((type & GV_BOUNDARY)) {
int do_line = 0;
int left, right;
do_line = Vect_cats_in_constraint(Cats, layer, cat_list);
if (!do_line) {
/* check if any of the centroids is selected */
Vect_get_line_areas(&Out, i, &left, &right);
if (left < 0)
left = Vect_get_isle_area(&Out, abs(left));
if (right < 0)
right = Vect_get_isle_area(&Out, abs(right));
if (left > 0) {
Vect_get_area_cats(&Out, left, Cats);
do_line = Vect_cats_in_constraint(Cats, layer, cat_list);
}
if (!do_line && right > 0) {
Vect_get_area_cats(&Out, right, Cats);
do_line = Vect_cats_in_constraint(Cats, layer, cat_list);
}
}
if (!do_line)
continue;
}
}
Vect_line_prune(APoints);
if (APoints->n_points < 2)
/* Line of length zero, delete if boundary ? */
continue;
total_input += APoints->n_points;
/* copy points */
Vect_reset_line(Points);
Vect_append_points(Points, APoints, GV_FORWARD);
loop_support = 0;
if (!loop_support_flag->answer) {
int n1, n2;
Vect_get_line_nodes(&Out, i, &n1, &n2);
if (n1 == n2) {
if (Vect_get_node_n_lines(&Out, n1) == 2) {
if (abs(Vect_get_node_line(&Out, n1, 0)) == i &&
abs(Vect_get_node_line(&Out, n1, 1)) == i)
loop_support = 1;
}
}
}
for (iter = 0; iter < iterations; iter++) {
switch (method) {
case DOUGLAS:
douglas_peucker(Points, thresh, with_z);
break;
case DOUGLAS_REDUCTION:
douglas_peucker_reduction(Points, thresh, reduction,
with_z);
break;
case LANG:
lang(Points, thresh, look_ahead, with_z);
break;
case VERTEX_REDUCTION:
vertex_reduction(Points, thresh, with_z);
break;
case REUMANN:
reumann_witkam(Points, thresh, with_z);
break;
case BOYLE:
boyle(Points, look_ahead, loop_support, with_z);
break;
case SLIDING_AVERAGING:
sliding_averaging(Points, slide, look_ahead, loop_support, with_z);
break;
case DISTANCE_WEIGHTING:
distance_weighting(Points, slide, look_ahead, loop_support, with_z);
break;
case CHAIKEN:
chaiken(Points, thresh, loop_support, with_z);
break;
case HERMITE:
hermite(Points, thresh, angle_thresh, loop_support, with_z);
break;
case SNAKES:
snakes(Points, alpha, beta, loop_support, with_z);
break;
}
}
if (loop_support == 0) {
/* safety check, BUG in method if not passed */
if (APoints->x[0] != Points->x[0] ||
APoints->y[0] != Points->y[0] ||
APoints->z[0] != Points->z[0])
G_fatal_error(_("Method '%s' did not preserve first point"), method_opt->answer);
if (APoints->x[APoints->n_points - 1] != Points->x[Points->n_points - 1] ||
APoints->y[APoints->n_points - 1] != Points->y[Points->n_points - 1] ||
APoints->z[APoints->n_points - 1] != Points->z[Points->n_points - 1])
G_fatal_error(_("Method '%s' did not preserve last point"), method_opt->answer);
}
else {
/* safety check, BUG in method if not passed */
if (Points->x[0] != Points->x[Points->n_points - 1] ||
Points->y[0] != Points->y[Points->n_points - 1] ||
Points->z[0] != Points->z[Points->n_points - 1])
G_fatal_error(_("Method '%s' did not preserve loop"), method_opt->answer);
}
Vect_line_prune(Points);
/* oversimplified line */
if (Points->n_points < 2) {
after = APoints->n_points;
n_oversimplified++;
if (error_out->answer)
Vect_write_line(&Error, type, APoints, Cats);
}
/* check for topology corruption */
else if (type == GV_BOUNDARY) {
if (!check_topo(&Out, i, APoints, Points, Cats)) {
after = APoints->n_points;
not_modified_boundaries++;
if (error_out->answer)
Vect_write_line(&Error, type, APoints, Cats);
}
else
after = Points->n_points;
}
else {
/* type == GV_LINE */
Vect_rewrite_line(&Out, i, type, Points, Cats);
after = Points->n_points;
}
total_output += after;
}
if (not_modified_boundaries > 0)
G_warning(_("%d boundaries were not modified because modification would damage topology"),
not_modified_boundaries);
if (n_oversimplified > 0)
G_warning(_("%d lines/boundaries were not modified due to over-simplification"),
n_oversimplified);
G_message("-----------------------------------------------------");
/* make sure that clean topo is built at the end */
Vect_build_partial(&Out, GV_BUILD_NONE);
if (error_out->answer)
Vect_build_partial(&Error, GV_BUILD_NONE);
}
Vect_build(&Out);
if (error_out->answer)
Vect_build(&Error);
Vect_close(&In);
Vect_close(&Out);
if (error_out->answer)
Vect_close(&Error);
G_message("-----------------------------------------------------");
if (total_input != 0 && total_input != total_output)
G_done_msg(_("Number of vertices for selected features %s from %d to %d (%d%% remaining)"),
simplification ? _("reduced") : _("changed"),
total_input, total_output,
(total_output * 100) / total_input);
else
G_done_msg(" ");
exit(EXIT_SUCCESS);
}
int main(int argc, char *argv[])
{
int i, type, stat;
int day, yr, Out_proj;
int out_zone = 0;
int overwrite; /* overwrite output map */
const char *mapset;
const char *omap_name, *map_name, *iset_name, *iloc_name;
struct pj_info info_in;
struct pj_info info_out;
const char *gbase;
char date[40], mon[4];
struct GModule *module;
struct Option *omapopt, *mapopt, *isetopt, *ilocopt, *ibaseopt, *smax;
struct Key_Value *in_proj_keys, *in_unit_keys;
struct Key_Value *out_proj_keys, *out_unit_keys;
struct line_pnts *Points, *Points2;
struct line_cats *Cats;
struct Map_info Map;
struct Map_info Out_Map;
struct bound_box src_box, tgt_box;
int nowrap = 0, recommend_nowrap = 0;
double lmax;
struct
{
struct Flag *list; /* list files in source location */
struct Flag *transformz; /* treat z as ellipsoidal height */
struct Flag *wrap; /* latlon output: wrap to 0,360 */
struct Flag *no_topol; /* do not build topology */
} flag;
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("projection"));
G_add_keyword(_("transformation"));
G_add_keyword(_("import"));
module->description = _("Re-projects a vector map from one location to the current location.");
/* set up the options and flags for the command line parser */
ilocopt = G_define_standard_option(G_OPT_M_LOCATION);
ilocopt->required = YES;
ilocopt->label = _("Location containing input vector map");
ilocopt->guisection = _("Source");
isetopt = G_define_standard_option(G_OPT_M_MAPSET);
isetopt->label = _("Mapset containing input vector map");
isetopt->description = _("Default: name of current mapset");
isetopt->guisection = _("Source");
mapopt = G_define_standard_option(G_OPT_V_INPUT);
mapopt->required = NO;
mapopt->label = _("Name of input vector map to re-project");
mapopt->description = NULL;
mapopt->guisection = _("Source");
ibaseopt = G_define_standard_option(G_OPT_M_DBASE);
ibaseopt->label = _("Path to GRASS database of input location");
smax = G_define_option();
smax->key = "smax";
smax->type = TYPE_DOUBLE;
smax->required = NO;
smax->answer = "10000";
smax->label = _("Maximum segment length in meters in output vector map");
smax->description = _("Increases accuracy of reprojected shapes, disable with smax=0");
smax->guisection = _("Target");
omapopt = G_define_standard_option(G_OPT_V_OUTPUT);
omapopt->required = NO;
omapopt->description = _("Name for output vector map (default: input)");
omapopt->guisection = _("Target");
flag.list = G_define_flag();
flag.list->key = 'l';
flag.list->description = _("List vector maps in input mapset and exit");
flag.transformz = G_define_flag();
flag.transformz->key = 'z';
flag.transformz->description = _("3D vector maps only");
flag.transformz->label =
_("Assume z coordinate is ellipsoidal height and "
"transform if possible");
flag.transformz->guisection = _("Target");
flag.wrap = G_define_flag();
flag.wrap->key = 'w';
flag.wrap->description = _("Latlon output only, default is -180,180");
flag.wrap->label =
_("Disable wrapping to -180,180 for latlon output");
flag.transformz->guisection = _("Target");
flag.no_topol = G_define_flag();
flag.no_topol->key = 'b';
flag.no_topol->label = _("Do not build vector topology");
flag.no_topol->description = _("Recommended for massive point projection");
/* The parser checks if the map already exists in current mapset,
we switch out the check and do it
in the module after the parser */
overwrite = G_check_overwrite(argc, argv);
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
/* start checking options and flags */
/* set input vector map name and mapset */
map_name = mapopt->answer;
if (omapopt->answer)
omap_name = omapopt->answer;
else
omap_name = map_name;
if (omap_name && !flag.list->answer && !overwrite &&
G_find_vector2(omap_name, G_mapset()))
G_fatal_error(_("option <%s>: <%s> exists. To overwrite, use the --overwrite flag"), omapopt->key,
omap_name);
if (isetopt->answer)
iset_name = isetopt->answer;
else
iset_name = G_store(G_mapset());
iloc_name = ilocopt->answer;
if (ibaseopt->answer)
gbase = ibaseopt->answer;
else
gbase = G_store(G_gisdbase());
if (!ibaseopt->answer && strcmp(iloc_name, G_location()) == 0)
G_fatal_error(_("Input and output locations can not be the same"));
lmax = atof(smax->answer);
if (lmax < 0)
lmax = 0;
Out_proj = G_projection();
if (Out_proj == PROJECTION_LL && flag.wrap->answer)
nowrap = 1;
G_begin_distance_calculations();
/* Change the location here and then come back */
select_target_env();
G_setenv_nogisrc("GISDBASE", gbase);
G_setenv_nogisrc("LOCATION_NAME", iloc_name);
stat = G_mapset_permissions(iset_name);
if (stat >= 0) { /* yes, we can access the mapset */
/* if requested, list the vector maps in source location - MN 5/2001 */
if (flag.list->answer) {
int i;
char **list;
G_verbose_message(_("Checking location <%s> mapset <%s>"),
iloc_name, iset_name);
list = G_list(G_ELEMENT_VECTOR, G_getenv_nofatal("GISDBASE"),
G_getenv_nofatal("LOCATION_NAME"), iset_name);
if (list[0]) {
for (i = 0; list[i]; i++) {
fprintf(stdout, "%s\n", list[i]);
}
fflush(stdout);
}
else {
G_important_message(_("No vector maps found"));
}
exit(EXIT_SUCCESS); /* leave v.proj after listing */
}
if (mapopt->answer == NULL) {
G_fatal_error(_("Required parameter <%s> not set"), mapopt->key);
}
G_setenv_nogisrc("MAPSET", iset_name);
/* Make sure map is available */
mapset = G_find_vector2(map_name, iset_name);
if (mapset == NULL)
G_fatal_error(_("Vector map <%s> in location <%s> mapset <%s> not found"),
map_name, iloc_name, iset_name);
/*** Get projection info for input mapset ***/
in_proj_keys = G_get_projinfo();
if (in_proj_keys == NULL)
exit(EXIT_FAILURE);
/* apparently the +over switch must be set in the input projection,
* not the output latlon projection */
if (Out_proj == PROJECTION_LL && nowrap == 1)
G_set_key_value("+over", "defined", in_proj_keys);
in_unit_keys = G_get_projunits();
if (in_unit_keys == NULL)
exit(EXIT_FAILURE);
if (pj_get_kv(&info_in, in_proj_keys, in_unit_keys) < 0)
exit(EXIT_FAILURE);
Vect_set_open_level(1);
G_debug(1, "Open old: location: %s mapset : %s", G_location_path(),
G_mapset());
if (Vect_open_old(&Map, map_name, mapset) < 0)
G_fatal_error(_("Unable to open vector map <%s>"), map_name);
}
else if (stat < 0)
{ /* allow 0 (i.e. denied permission) */
/* need to be able to read from others */
if (stat == 0)
G_fatal_error(_("Mapset <%s> in input location <%s> - permission denied"),
iset_name, iloc_name);
else
G_fatal_error(_("Mapset <%s> in input location <%s> not found"),
iset_name, iloc_name);
}
select_current_env();
/****** get the output projection parameters ******/
out_proj_keys = G_get_projinfo();
if (out_proj_keys == NULL)
exit(EXIT_FAILURE);
out_unit_keys = G_get_projunits();
if (out_unit_keys == NULL)
exit(EXIT_FAILURE);
if (pj_get_kv(&info_out, out_proj_keys, out_unit_keys) < 0)
exit(EXIT_FAILURE);
G_free_key_value(in_proj_keys);
G_free_key_value(in_unit_keys);
G_free_key_value(out_proj_keys);
G_free_key_value(out_unit_keys);
if (G_verbose() == G_verbose_max()) {
pj_print_proj_params(&info_in, &info_out);
}
/* Initialize the Point / Cat structure */
Points = Vect_new_line_struct();
Points2 = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
/* test if latlon wrapping to -180,180 should be disabled */
if (Out_proj == PROJECTION_LL && nowrap == 0) {
int first = 1, counter = 0;
double x, y;
/* Cycle through all lines */
Vect_rewind(&Map);
while (1) {
type = Vect_read_next_line(&Map, Points, Cats); /* read line */
if (type == 0)
continue; /* Dead */
if (type == -1)
G_fatal_error(_("Reading input vector map"));
if (type == -2)
break;
if (first && Points->n_points > 0) {
first = 0;
src_box.E = src_box.W = Points->x[0];
src_box.N = src_box.S = Points->y[0];
src_box.T = src_box.B = Points->z[0];
}
for (i = 0; i < Points->n_points; i++) {
if (src_box.E < Points->x[i])
src_box.E = Points->x[i];
if (src_box.W > Points->x[i])
src_box.W = Points->x[i];
if (src_box.N < Points->y[i])
src_box.N = Points->y[i];
if (src_box.S > Points->y[i])
src_box.S = Points->y[i];
}
counter++;
}
if (counter == 0) {
G_warning(_("Input vector map <%s> is empty"), omap_name);
exit(EXIT_SUCCESS);
}
/* NW corner */
x = src_box.W;
y = src_box.N;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
tgt_box.E = x;
tgt_box.W = x;
tgt_box.N = y;
tgt_box.S = y;
/* SW corner */
x = src_box.W;
y = src_box.S;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
if (tgt_box.W > x)
tgt_box.W = x;
if (tgt_box.E < x)
tgt_box.E = x;
if (tgt_box.N < y)
tgt_box.N = y;
if (tgt_box.S > y)
tgt_box.S = y;
/* NE corner */
x = src_box.E;
y = src_box.N;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
if (tgt_box.W > x) {
tgt_box.E = x + 360;
recommend_nowrap = 1;
}
if (tgt_box.N < y)
tgt_box.N = y;
if (tgt_box.S > y)
tgt_box.S = y;
/* SE corner */
x = src_box.E;
y = src_box.S;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
if (tgt_box.W > x) {
if (tgt_box.E < x + 360)
tgt_box.E = x + 360;
recommend_nowrap = 1;
}
if (tgt_box.N < y)
tgt_box.N = y;
if (tgt_box.S > y)
tgt_box.S = y;
}
G_debug(1, "Open new: location: %s mapset : %s", G_location_path(),
G_mapset());
if (Vect_open_new(&Out_Map, omap_name, Vect_is_3d(&Map)) < 0)
G_fatal_error(_("Unable to create vector map <%s>"), omap_name);
Vect_set_error_handler_io(NULL, &Out_Map); /* register standard i/o error handler */
Vect_copy_head_data(&Map, &Out_Map);
Vect_hist_copy(&Map, &Out_Map);
Vect_hist_command(&Out_Map);
out_zone = info_out.zone;
Vect_set_zone(&Out_Map, out_zone);
/* Read and write header info */
sprintf(date, "%s", G_date());
sscanf(date, "%*s%s%d%*s%d", mon, &day, &yr);
if (yr < 2000)
yr = yr - 1900;
else
yr = yr - 2000;
sprintf(date, "%s %d %d", mon, day, yr);
Vect_set_date(&Out_Map, date);
/* line densification works only with vector topology */
if (Map.format != GV_FORMAT_NATIVE)
lmax = 0;
/* Cycle through all lines */
Vect_rewind(&Map);
i = 0;
G_message(_("Reprojecting primitives ..."));
while (TRUE) {
++i;
G_progress(i, 1e3);
type = Vect_read_next_line(&Map, Points, Cats); /* read line */
if (type == 0)
continue; /* Dead */
if (type == -1)
G_fatal_error(_("Reading input vector map"));
if (type == -2)
break;
Vect_line_prune(Points);
if (lmax > 0 && (type & GV_LINES) && Points->n_points > 1) {
double x1, y1, z1, x2, y2, z2;
double dx, dy, dz;
double l;
int i, n;
Vect_reset_line(Points2);
for (i = 0; i < Points->n_points - 1; i++) {
x1 = Points->x[i];
y1 = Points->y[i];
z1 = Points->z[i];
n = i + 1;
x2 = Points->x[n];
y2 = Points->y[n];
z2 = Points->z[n];
dx = x2 - x1;
dy = y2 - y1;
dz = z2 - z1;
if (pj_do_transform(1, &x1, &y1,
flag.transformz->answer ? &z1 : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
if (pj_do_transform(1, &x2, &y2,
flag.transformz->answer ? &z2 : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
Vect_append_point(Points2, x1, y1, z1);
l = G_distance(x1, y1, x2, y2);
if (l > lmax) {
int j;
double x, y, z;
x1 = Points->x[i];
y1 = Points->y[i];
z1 = Points->z[i];
n = ceil(l / lmax);
for (j = 1; j < n; j++) {
x = x1 + dx * j / n;
y = y1 + dy * j / n;
z = z1 + dz * j / n;
if (pj_do_transform(1, &x, &y,
flag.transformz->answer ? &z : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
Vect_append_point(Points2, x, y, z);
}
}
}
Vect_append_point(Points2, x2, y2, z2);
Vect_write_line(&Out_Map, type, Points2, Cats); /* write line */
}
else {
if (pj_do_transform(Points->n_points, Points->x, Points->y,
flag.transformz->answer ? Points->z : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
Vect_write_line(&Out_Map, type, Points, Cats); /* write line */
}
} /* end lines section */
G_progress(1, 1);
/* Copy tables */
if (Vect_copy_tables(&Map, &Out_Map, 0))
G_warning(_("Failed to copy attribute table to output map"));
Vect_close(&Map);
if (!flag.no_topol->answer)
Vect_build(&Out_Map);
Vect_close(&Out_Map);
if (recommend_nowrap)
G_important_message(_("Try to disable wrapping to -180,180 "
"if topological errors occurred"));
exit(EXIT_SUCCESS);
}
int main(int argc, char *argv[])
{
struct file_info Current, Trans, Coord;
struct GModule *module;
struct Option *vold, *vnew, *pointsfile, *xshift, *yshift, *zshift,
*xscale, *yscale, *zscale, *zrot, *columns, *table, *field;
struct Flag *quiet_flag, *tozero_flag, *shift_flag, *print_mat_flag;
char *mapset, mon[4], date[40], buf[1000];
struct Map_info Old, New;
int ifield;
int day, yr;
BOUND_BOX box;
double ztozero;
double trans_params[7]; /* xshift, ..., xscale, ..., zrot */
/* columns */
unsigned int i;
int idx, out3d;
char **tokens;
char *columns_name[7]; /* xshift, yshift, zshift, xscale, yscale, zscale, zrot */
G_gisinit(argv[0]);
module = G_define_module();
module->keywords = _("vector, transformation");
module->description =
_("Performs an affine transformation (shift, scale and rotate, "
"or GPCs) on vector map.");
/* remove in GRASS7 */
quiet_flag = G_define_flag();
quiet_flag->key = 'q';
quiet_flag->description =
_("Suppress display of residuals or other information");
tozero_flag = G_define_flag();
tozero_flag->key = 't';
tozero_flag->description = _("Shift all z values to bottom=0");
tozero_flag->guisection = _("Custom");
print_mat_flag = G_define_flag();
print_mat_flag->key = 'm';
print_mat_flag->description =
_("Print the transformation matrix to stdout");
shift_flag = G_define_flag();
shift_flag->key = 's';
shift_flag->description =
_("Instead of points use transformation parameters "
"(xshift, yshift, zshift, xscale, yscale, zscale, zrot)");
shift_flag->guisection = _("Custom");
vold = G_define_standard_option(G_OPT_V_INPUT);
field = G_define_standard_option(G_OPT_V_FIELD);
field->answer = "-1";
vnew = G_define_standard_option(G_OPT_V_OUTPUT);
pointsfile = G_define_standard_option(G_OPT_F_INPUT);
pointsfile->key = "pointsfile";
pointsfile->required = NO;
pointsfile->label = _("ASCII file holding transform coordinates");
pointsfile->description = _("If not given, transformation parameters "
"(xshift, yshift, zshift, xscale, yscale, zscale, zrot) are used instead");
pointsfile->gisprompt = "old_file,file,points";
pointsfile->guisection = _("Points");
xshift = G_define_option();
xshift->key = "xshift";
xshift->type = TYPE_DOUBLE;
xshift->required = NO;
xshift->multiple = NO;
xshift->description = _("Shifting value for x coordinates");
xshift->answer = "0.0";
xshift->guisection = _("Custom");
yshift = G_define_option();
yshift->key = "yshift";
yshift->type = TYPE_DOUBLE;
yshift->required = NO;
yshift->multiple = NO;
yshift->description = _("Shifting value for y coordinates");
yshift->answer = "0.0";
yshift->guisection = _("Custom");
zshift = G_define_option();
zshift->key = "zshift";
zshift->type = TYPE_DOUBLE;
zshift->required = NO;
zshift->multiple = NO;
zshift->description = _("Shifting value for z coordinates");
zshift->answer = "0.0";
zshift->guisection = _("Custom");
xscale = G_define_option();
xscale->key = "xscale";
xscale->type = TYPE_DOUBLE;
xscale->required = NO;
xscale->multiple = NO;
xscale->description = _("Scaling factor for x coordinates");
xscale->answer = "1.0";
xscale->guisection = _("Custom");
yscale = G_define_option();
yscale->key = "yscale";
yscale->type = TYPE_DOUBLE;
yscale->required = NO;
yscale->multiple = NO;
yscale->description = _("Scaling factor for y coordinates");
yscale->answer = "1.0";
yscale->guisection = _("Custom");
zscale = G_define_option();
zscale->key = "zscale";
zscale->type = TYPE_DOUBLE;
zscale->required = NO;
zscale->multiple = NO;
zscale->description = _("Scaling factor for z coordinates");
zscale->answer = "1.0";
zscale->guisection = _("Custom");
zrot = G_define_option();
zrot->key = "zrot";
zrot->type = TYPE_DOUBLE;
zrot->required = NO;
zrot->multiple = NO;
zrot->description =
_("Rotation around z axis in degrees counterclockwise");
zrot->answer = "0.0";
zrot->guisection = _("Custom");
table = G_define_standard_option(G_OPT_TABLE);
table->description =
_("Name of table containing transformation parameters");
table->guisection = _("Attributes");
columns = G_define_option();
columns->key = "columns";
columns->type = TYPE_STRING;
columns->required = NO;
columns->multiple = NO;
columns->label =
_("Name of attribute column(s) used as transformation parameters");
columns->description =
_("Format: parameter:column, e.g. xshift:xs,yshift:ys,zrot:zr");
columns->guisection = _("Attributes");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
G_strcpy(Current.name, vold->answer);
G_strcpy(Trans.name, vnew->answer);
Vect_check_input_output_name(vold->answer, vnew->answer, GV_FATAL_EXIT);
out3d = WITHOUT_Z;
ifield = atoi(field->answer);
if (shift_flag->answer)
G_warning(_("The '%c' flag is deprecated and will be removed in future. "
"Transformation parameters are used automatically when no pointsfile is given."),
shift_flag->key);
/* please remove in GRASS7 */
if (quiet_flag->answer) {
G_warning(_("The '%c' flag is deprecated and will be removed in future. "
"Please use '--quiet' instead."), quiet_flag->key);
G_putenv("GRASS_VERBOSE", "0");
}
/* if a table is specified, require columns and layer */
/* if columns are specified, but no table, require layer > 0 and use
* the table attached to that layer */
if (table->answer && !columns->answer) {
G_fatal_error(_("Column names are not defined. Please use '%s' parameter."),
columns->key);
}
if ((columns->answer || table->answer) && ifield < 1) {
G_fatal_error(_("Please specify a valid layer with '%s' parameter."),
field->key);
}
if (table->answer && strcmp(vnew->answer, table->answer) == 0) {
G_fatal_error(_("Name of table and name for output vector map must be different. "
"Otherwise the table is overwritten."));
}
if (!columns->answer && !table->answer)
ifield = -1;
if (pointsfile->answer != NULL && !shift_flag->answer) {
G_strcpy(Coord.name, pointsfile->answer);
}
else {
Coord.name[0] = '\0';
}
/* open coord file */
if (Coord.name[0] != '\0') {
if ((Coord.fp = fopen(Coord.name, "r")) == NULL)
G_fatal_error(_("Unable to open file with coordinates <%s>"),
Coord.name);
}
/* tokenize columns names */
for (i = 0; i <= IDX_ZROT; i++) {
columns_name[i] = NULL;
}
i = 0;
if (columns->answer) {
while (columns->answers[i]) {
tokens = G_tokenize(columns->answers[i], ":");
if (G_number_of_tokens(tokens) == 2) {
if (strcmp(tokens[0], xshift->key) == 0)
idx = IDX_XSHIFT;
else if (strcmp(tokens[0], yshift->key) == 0)
idx = IDX_YSHIFT;
else if (strcmp(tokens[0], zshift->key) == 0)
idx = IDX_ZSHIFT;
else if (strcmp(tokens[0], xscale->key) == 0)
idx = IDX_XSCALE;
else if (strcmp(tokens[0], yscale->key) == 0)
idx = IDX_YSCALE;
else if (strcmp(tokens[0], zscale->key) == 0)
idx = IDX_ZSCALE;
else if (strcmp(tokens[0], zrot->key) == 0)
idx = IDX_ZROT;
else
idx = -1;
if (idx != -1)
columns_name[idx] = G_store(tokens[1]);
G_free_tokens(tokens);
}
else {
G_fatal_error(_("Unable to tokenize column string: [%s]"),
columns->answers[i]);
}
i++;
}
}
/* determine transformation parameters */
trans_params[IDX_XSHIFT] = atof(xshift->answer);
trans_params[IDX_YSHIFT] = atof(yshift->answer);
trans_params[IDX_ZSHIFT] = atof(zshift->answer);
trans_params[IDX_XSCALE] = atof(xscale->answer);
trans_params[IDX_YSCALE] = atof(yscale->answer);
trans_params[IDX_ZSCALE] = atof(zscale->answer);
trans_params[IDX_ZROT] = atof(zrot->answer);
/* open vector maps */
if ((mapset = G_find_vector2(vold->answer, "")) == NULL)
G_fatal_error(_("Vector map <%s> not found"), vold->answer);
Vect_open_old(&Old, vold->answer, mapset);
/* should output be 3D ?
* note that z-scale and ztozero have no effect with input 2D */
if (Vect_is_3d(&Old) || trans_params[IDX_ZSHIFT] != 0. ||
columns_name[IDX_ZSHIFT])
out3d = WITH_Z;
Vect_open_new(&New, vnew->answer, out3d);
/* copy and set header */
Vect_copy_head_data(&Old, &New);
Vect_hist_copy(&Old, &New);
Vect_hist_command(&New);
sprintf(date, "%s", G_date());
sscanf(date, "%*s%s%d%*s%d", mon, &day, &yr);
sprintf(date, "%s %d %d", mon, day, yr);
Vect_set_date(&New, date);
Vect_set_person(&New, G_whoami());
sprintf(buf, "transformed from %s", vold->answer);
Vect_set_map_name(&New, buf);
Vect_set_scale(&New, 1);
Vect_set_zone(&New, 0);
Vect_set_thresh(&New, 0.0);
/* points file */
if (Coord.name[0]) {
create_transform_from_file(&Coord, quiet_flag->answer);
if (Coord.name[0] != '\0')
fclose(Coord.fp);
}
Vect_get_map_box(&Old, &box);
/* z to zero */
if (tozero_flag->answer)
ztozero = 0 - box.B;
else
ztozero = 0;
/* do the transformation */
transform_digit_file(&Old, &New, Coord.name[0] ? 1 : 0,
ztozero, trans_params,
table->answer, columns_name, ifield);
if (Vect_copy_tables(&Old, &New, 0))
G_warning(_("Failed to copy attribute table to output map"));
Vect_close(&Old);
Vect_build(&New);
if (!quiet_flag->answer) {
Vect_get_map_box(&New, &box);
G_message(_("\nNew vector map <%s> boundary coordinates:"),
vnew->answer);
G_message(_(" N: %-10.3f S: %-10.3f"), box.N, box.S);
G_message(_(" E: %-10.3f W: %-10.3f"), box.E, box.W);
G_message(_(" B: %6.3f T: %6.3f"), box.B, box.T);
/* print the transformation matrix if requested */
if (print_mat_flag->answer)
print_transform_matrix();
}
Vect_close(&New);
G_done_msg(" ");
exit(EXIT_SUCCESS);
}
int main(int argc, char **argv)
{
struct GModule *module;
struct opts opt;
struct Map_info In, Out;
BOUND_BOX box;
int field, type;
int ret;
G_gisinit(argv[0]);
module = G_define_module();
module->keywords = _("vector, transformation, 3D");
module->description =
_("Performs transformation of 2D vector features to 3D.");
parse_args(&opt);
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
field = atoi(opt.field->answer);
type = Vect_option_to_types(opt.type);
if (!opt.reverse->answer) {
if ((!opt.height->answer && !opt.column->answer) ||
(opt.height->answer && opt.column->answer)) {
G_fatal_error(_("Either '%s' or '%s' parameter have to be used"),
opt.height->key, opt.column->key);
}
}
else {
if (opt.height->answer) {
G_warning(_("Parameters '%s' ignored"), opt.height->key);
}
}
if (opt.reverse->answer && opt.table->answer) {
G_fatal_error(_("Attribute table required"));
}
Vect_check_input_output_name(opt.input->answer, opt.output->answer,
GV_FATAL_EXIT);
/* open input vector, topology not needed */
Vect_set_open_level(1);
if (Vect_open_old(&In, opt.input->answer, "") < 1)
G_fatal_error(_("Unable to open vector map <%s>"), opt.input->answer);
if (opt.reverse->answer && !Vect_is_3d(&In)) {
Vect_close(&In);
G_fatal_error(_("Vector map <%s> is 2D"), opt.input->answer);
}
if (!opt.reverse->answer && Vect_is_3d(&In)) {
Vect_close(&In);
G_fatal_error(_("Vector map <%s> is 3D"), opt.input->answer);
}
/* create output vector */
Vect_set_open_level(2);
if (Vect_open_new(&Out, opt.output->answer,
opt.reverse->answer ? WITHOUT_Z : WITH_Z) == -1)
G_fatal_error(_("Unable to create vector map <%s>"),
opt.output->answer);
/* copy history & header */
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
Vect_copy_head_data(&In, &Out);
if (opt.reverse->answer && !opt.table->answer) {
G_message(_("Copying attributes..."));
if (Vect_copy_tables(&In, &Out, 0) == -1) {
G_warning(_("Unable to copy attributes"));
}
}
G_message(_("Transforming features..."));
ret = 0;
if (opt.reverse->answer) {
/* 3d -> 2d */
ret = trans3d(&In, &Out, type, field, opt.column->answer);
}
else {
/* 2d -> 3d */
double height = 0.;
if (opt.height->answer) {
height = atof(opt.height->answer);
}
ret = trans2d(&In, &Out, type, height, field, opt.column->answer);
}
if (ret < 0) {
Vect_close(&In);
Vect_close(&Out);
Vect_delete(opt.output->answer);
G_fatal_error(_("%s failed"), G_program_name());
}
if (!opt.reverse->answer && !opt.table->answer) {
G_message(_("Copying attributes..."));
if (Vect_copy_tables(&In, &Out, 0) == -1) {
G_warning(_("Unable to copy attributes"));
}
}
Vect_close(&In);
Vect_build(&Out);
if (!opt.reverse->answer) {
Vect_get_map_box(&Out, &box);
G_message(_("Vertical extent of vector map <%s>: B: %f T: %f"),
opt.output->answer, box.B, box.T);
}
Vect_close(&Out);
exit(EXIT_SUCCESS);
}
int main(int argc, char **argv)
{
int line;
struct line_pnts *points;
struct line_cats *Cats;
struct Map_info map, Out;
struct GModule *module;
struct Option *input;
struct Option *output;
struct Option *cats;
struct Option *type_opt;
char *desc;
int polyline;
int *lines_visited;
int points_in_polyline;
int start_line;
int nlines;
int write_cats, copy_tables;
int type, ltype;
/* Initialize the GIS calls */
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("topology"));
G_add_keyword(_("geometry"));
G_add_keyword(_("line"));
G_add_keyword(_("node"));
G_add_keyword(_("vertex"));
module->description = _("Builds polylines from lines or boundaries.");
/* Define the options */
input = G_define_standard_option(G_OPT_V_INPUT);
output = G_define_standard_option(G_OPT_V_OUTPUT);
cats = G_define_option();
cats->key = "cats";
cats->type = TYPE_STRING;
cats->description = _("Category number mode");
cats->options = "no,first,multi,same";
desc = NULL;
G_asprintf(&desc,
"no;%s;first;%s;multi;%s;same;%s",
_("Do not assign any category number to polyline"),
_("Assign category number of first line to polyline"),
_("Assign multiple category numbers to polyline"),
_("Create polyline from lines with same categories"));
cats->descriptions = desc;
cats->answer = "no";
type_opt = G_define_standard_option(G_OPT_V_TYPE);
type_opt->options = "line,boundary";
type_opt->answer = "line,boundary";
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
Vect_check_input_output_name(input->answer, output->answer,
G_FATAL_EXIT);
/* Open binary vector map at level 2 */
Vect_set_open_level(2);
if (Vect_open_old(&map, input->answer, "") < 0)
G_fatal_error(_("Unable to open vector map <%s>"), input->answer);
/* Open new vector */
G_find_vector2(output->answer, "");
if (Vect_open_new(&Out, output->answer, Vect_is_3d(&map)) < 0)
G_fatal_error(_("Unable to create vector map <%s>"), output->answer);
/* Copy header info. */
Vect_copy_head_data(&map, &Out);
/* History */
Vect_hist_copy(&map, &Out);
Vect_hist_command(&Out);
/* Get the number of lines in the binary map and set up record of lines visited */
lines_visited =
(int *)G_calloc(Vect_get_num_lines(&map) + 1, sizeof(int));
/* Set up points structure and coordinate arrays */
points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
/* Write cats */
if (strcmp(cats->answer, "no") == 0)
write_cats = NO_CATS;
else if (strcmp(cats->answer, "first") == 0)
write_cats = ONE_CAT;
else
write_cats = MULTI_CATS;
if (type_opt->answer)
type = Vect_option_to_types(type_opt);
else
type = GV_LINES;
/* Step over all lines in binary map */
polyline = 0;
nlines = 0;
copy_tables = (write_cats != NO_CATS);
for (line = 1; line <= Vect_get_num_lines(&map); line++) {
Vect_reset_cats(Cats);
ltype = Vect_read_line(&map, NULL, NULL, line);
if ((ltype & GV_LINES) && (ltype & type))
nlines++;
else {
/* copy points to output as they are, with cats */
Vect_read_line(&map, points, Cats, line);
Vect_write_line(&Out, ltype, points, Cats);
if (Cats->n_cats > 0)
copy_tables = 1;
continue;
}
/* Skip line if already visited from another */
if (lines_visited[line])
continue;
/* Only get here if line is not previously visited */
/* Find start of this polyline */
start_line = walk_back(&map, line, ltype);
G_debug(1, "Polyline %d: start line = %d", polyline, start_line);
/* Walk forward and pick up coordinates */
points_in_polyline =
walk_forward_and_pick_up_coords(&map, start_line, ltype, points,
lines_visited, Cats, write_cats);
/* Write the line (type of the first line is used) */
Vect_write_line(&Out, ltype, points, Cats);
polyline++;
}
G_verbose_message(n_("%d line or boundaries found in input vector map",
"%d lines or boundaries found in input vector map",
nlines),
nlines, Vect_get_name(&map), Vect_get_mapset(&map));
G_verbose_message(n_("%d polyline stored in output vector map",
"%d polylines stored in output vector map",
polyline),
polyline, Vect_get_name(&Out), Vect_get_mapset(&Out));
/* Copy (all linked) tables if needed */
if (copy_tables) {
if (Vect_copy_tables(&map, &Out, 0))
G_warning(_("Failed to copy attribute table to output map"));
}
/* Tidy up */
Vect_destroy_line_struct(points);
Vect_destroy_cats_struct(Cats);
G_free(lines_visited);
Vect_close(&map);
Vect_build(&Out);
Vect_close(&Out);
exit(EXIT_SUCCESS);
}
int main(int argc, char *argv[])
{
struct Map_info In, Out;
static struct line_pnts *Points;
struct line_cats *Cats;
struct field_info *Fi;
struct cat_list *Clist;
int i, j, ret, option, otype, type, with_z, step, id;
int n_areas, centr, new_centr, nmodified;
int open_level;
double x, y;
int cat, ocat, scat, *fields, nfields, field;
struct GModule *module;
struct Option *in_opt, *out_opt, *option_opt, *type_opt;
struct Option *cat_opt, *field_opt, *step_opt, *id_opt;
struct Flag *shell, *notab;
FREPORT **freps;
int nfreps, rtype, fld;
char *desc;
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("category"));
G_add_keyword(_("layer"));
module->description =
_("Attaches, deletes or reports vector categories to map geometry.");
in_opt = G_define_standard_option(G_OPT_V_INPUT);
field_opt = G_define_standard_option(G_OPT_V_FIELD);
field_opt->multiple = YES;
field_opt->guisection = _("Selection");
type_opt = G_define_standard_option(G_OPT_V3_TYPE);
type_opt->answer = "point,line,centroid,face";
type_opt->guisection = _("Selection");
id_opt = G_define_standard_option(G_OPT_V_IDS);
id_opt->label = _("Feature ids (by default all features are processed)");
id_opt->guisection = _("Selection");
out_opt = G_define_standard_option(G_OPT_V_OUTPUT);
out_opt->required = NO;
option_opt = G_define_option();
option_opt->key = "option";
option_opt->type = TYPE_STRING;
option_opt->required = YES;
option_opt->multiple = NO;
option_opt->options = "add,del,chlayer,sum,report,print,layers,transfer";
option_opt->description = _("Action to be done");
desc = NULL;
G_asprintf(&desc,
"add;%s;"
"del;%s;"
"chlayer;%s;"
"sum;%s;"
"transfer;%s;"
"report;%s;"
"print;%s;"
"layers;%s",
_("add a category to features without category in the given layer"),
_("delete category (cat=-1 to delete all categories of given layer)"),
_("change layer number (e.g. layer=3,1 changes layer 3 to layer 1)"),
_("add the value specified by cat option to the current category value"),
_("copy values from one layer to another (e.g. layer=1,2,3 copies values from layer 1 to layer 2 and 3)"),
_("print report (statistics), in shell style: layer type count min max"),
_("print category values, layers are separated by '|', more cats in the same layer are separated by '/'"),
_("print only layer numbers"));
option_opt->descriptions = desc;
cat_opt = G_define_standard_option(G_OPT_V_CAT);
cat_opt->answer = "1";
step_opt = G_define_option();
step_opt->key = "step";
step_opt->type = TYPE_INTEGER;
step_opt->required = NO;
step_opt->multiple = NO;
step_opt->answer = "1";
step_opt->description = _("Category increment");
shell = G_define_flag();
shell->key = 'g';
shell->label = _("Shell script style, currently only for report");
shell->description = _("Format: layer type count min max");
notab = G_define_standard_flag(G_FLG_V_TABLE);
notab->description = _("Do not copy attribute table(s)");
G_gisinit(argv[0]);
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
/* read options */
option = 0;
switch (option_opt->answer[0]) {
case ('a'):
option = O_ADD;
break;
case ('d'):
option = O_DEL;
break;
case ('c'):
option = O_CHFIELD;
G_warning(_("Database connection and attribute tables for concerned layers are not changed"));
break;
case ('s'):
option = O_SUM;
break;
case ('t'):
option = O_TRANS;
break;
case ('r'):
option = O_REP;
break;
case ('p'):
option = O_PRN;
break;
case ('l'):
option = O_LYR;
break;
}
if (option == O_LYR) {
/* print vector layer numbers */
/* open vector on level 2 head only, this is why this option
* is processed here, all other options need (?) to fully open
* the input vector */
Vect_set_open_level(2);
if (Vect_open_old_head2(&In, in_opt->answer, "", field_opt->answer) < 2) {
G_fatal_error(_("Unable to open vector map <%s> at topological level %d"),
Vect_get_full_name(&In), 2);
}
if (In.format == GV_FORMAT_NATIVE) {
nfields = Vect_cidx_get_num_fields(&In);
for (i = 0; i < nfields; i++) {
if ((field = Vect_cidx_get_field_number(&In, i)) > 0)
fprintf(stdout, "%d\n", field);
}
}
else
fprintf(stdout, "%s\n", field_opt->answer);
Vect_close(&In);
exit(EXIT_SUCCESS);
}
cat = atoi(cat_opt->answer);
step = atoi(step_opt->answer);
otype = Vect_option_to_types(type_opt);
if (cat < 0 && option == O_ADD)
G_fatal_error(_("Invalid category number (must be equal to or greater than 0). "
"Normally category number starts at 1."));
/* collect ids */
if (id_opt->answer) {
Clist = Vect_new_cat_list();
Clist->field = atoi(field_opt->answer);
ret = Vect_str_to_cat_list(id_opt->answer, Clist);
if (ret > 0) {
G_warning(n_("%d error in id option",
"%d errors in id option",
ret), ret);
}
}
else {
Clist = NULL;
}
if ((option != O_REP) && (option != O_PRN) && (option != O_LYR)) {
if (out_opt->answer == NULL)
G_fatal_error(_("Output vector wasn't entered"));
Vect_check_input_output_name(in_opt->answer, out_opt->answer,
G_FATAL_EXIT);
}
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
/* do we need topology ? */
if ((option == O_ADD && (otype & GV_AREA)) ||
(option == O_REP && (otype & GV_AREA)) ||
(option == O_TRANS) || /* topo for cidx check */
(option == O_LYR)) /* topo for cidx check */
open_level = 2;
else
open_level = 1;
/* open input vector */
if (open_level > 1) {
Vect_set_open_level(open_level);
if (Vect_open_old2(&In, in_opt->answer, "", field_opt->answer) < open_level) {
G_warning(_("Unable to open vector map <%s> at topological level %d"),
Vect_get_full_name(&In), open_level);
open_level = 1;
}
}
if (open_level == 1) {
Vect_set_open_level(open_level);
if (Vect_open_old2(&In, in_opt->answer, "", field_opt->answer) < open_level) {
G_fatal_error(_("Unable to open vector map <%s> at topological level %d"),
Vect_get_full_name(&In), open_level);
}
}
/* read fields */
i = nfields = 0;
while (field_opt->answers[i++])
nfields++;
fields = (int *)G_malloc(nfields * sizeof(int));
i = 0;
while (field_opt->answers[i]) {
fields[i] = Vect_get_field_number(&In, field_opt->answers[i]);
i++;
}
if (nfields > 1 && option != O_PRN && option != O_CHFIELD && option != O_TRANS)
G_fatal_error(_("Too many layers for this operation"));
if (nfields != 2 && option == O_CHFIELD)
G_fatal_error(_("2 layers must be specified"));
if (option == O_TRANS && open_level == 1 && nfields < 2) {
G_fatal_error(_("2 layers must be specified"));
}
if (option == O_TRANS && open_level > 1) {
/* check if field[>0] already exists */
if (nfields > 1) {
for(i = 1; i < nfields; i++) {
if (Vect_cidx_get_field_index(&In, fields[i]) != -1)
G_warning(_("Categories already exist in layer %d"), fields[i]);
}
}
/* find next free layer number */
else if (nfields == 1) {
int max = -1;
for (i = 0; i < Vect_cidx_get_num_fields(&In); i++) {
if (max < Vect_cidx_get_field_number(&In, i))
max = Vect_cidx_get_field_number(&In, i);
}
max++;
nfields++;
fields = (int *)G_realloc(fields, nfields * sizeof(int));
fields[nfields - 1] = max;
}
}
if (otype & GV_AREA && option == O_TRANS && !(otype & GV_CENTROID))
otype |= GV_CENTROID;
/* open output vector if needed */
if (option == O_ADD || option == O_DEL || option == O_CHFIELD ||
option == O_SUM || option == O_TRANS) {
with_z = Vect_is_3d(&In);
if (0 > Vect_open_new(&Out, out_opt->answer, with_z)) {
Vect_close(&In);
exit(EXIT_FAILURE);
}
Vect_copy_head_data(&In, &Out);
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
}
id = 0;
nmodified = 0;
if (option == O_ADD || option == O_DEL || option == O_CHFIELD ||
option == O_SUM || option == O_TRANS) {
G_message(_("Processing features..."));
}
switch (option) {
case (O_ADD):
/* Lines */
while ((type = Vect_read_next_line(&In, Points, Cats)) > 0) {
id++;
if (type & otype && (!Clist ||
(Clist &&
Vect_cat_in_cat_list(id, Clist) == TRUE))) {
if ((Vect_cat_get(Cats, fields[0], &ocat)) == 0) {
if (ocat < 0) {
if (Vect_cat_set(Cats, fields[0], cat) > 0) {
nmodified++;
}
cat += step;
}
}
}
Vect_write_line(&Out, type, Points, Cats);
}
/* Areas */
if ((otype & GV_AREA) && open_level > 1) {
n_areas = Vect_get_num_areas(&In);
new_centr = 0;
for (i = 1; i <= n_areas; i++) {
centr = Vect_get_area_centroid(&In, i);
if (centr > 0)
continue; /* Centroid exists and may be processed as line */
ret = Vect_get_point_in_area(&In, i, &x, &y);
if (ret < 0) {
G_warning(_("Unable to calculate area centroid"));
continue;
}
Vect_reset_line(Points);
Vect_reset_cats(Cats);
Vect_append_point(Points, x, y, 0.0);
if (Vect_cat_set(Cats, fields[0], cat) > 0) {
nmodified++;
}
cat += step;
Vect_write_line(&Out, GV_CENTROID, Points, Cats);
new_centr++;
}
if (new_centr > 0)
G_message(n_("%d new centroid placed in output map",
"%d new centroids placed in output map",
new_centr), new_centr);
}
break;
case (O_TRANS):
/* Lines */
while ((type = Vect_read_next_line(&In, Points, Cats)) > 0) {
id++;
if (type & otype && (!Clist ||
(Clist &&
Vect_cat_in_cat_list(id, Clist) == TRUE))) {
int n = Cats->n_cats;
scat = -1;
for (i = 0; i < n; i++) {
if (Cats->field[i] == fields[0]) {
scat = Cats->cat[i];
for (j = 1; j < nfields; j++) {
if (Vect_cat_set(Cats, fields[j], scat) > 0) {
G_debug(4, "Copy cat %i of field %i to field %i", scat, fields[0], fields[j]);
}
}
}
}
if (scat != -1)
nmodified++;
}
Vect_write_line(&Out, type, Points, Cats);
}
break;
case (O_DEL):
while ((type = Vect_read_next_line(&In, Points, Cats)) > 0) {
id++;
if (type & otype && (!Clist ||
(Clist &&
Vect_cat_in_cat_list(id, Clist) == TRUE))) {
ret = Vect_field_cat_del(Cats, fields[0], cat);
if (ret > 0) {
nmodified++;
}
}
Vect_write_line(&Out, type, Points, Cats);
}
break;
case (O_CHFIELD):
while ((type = Vect_read_next_line(&In, Points, Cats)) > 0) {
id++;
if (type & otype && (!Clist ||
(Clist &&
Vect_cat_in_cat_list(id, Clist) == TRUE))) {
i = 0;
while (i < Cats->n_cats) {
if (Cats->field[i] == fields[0]) {
int found = -1;
/* check if cat already exists in layer fields[1] */
for (j = 0; j < Cats->n_cats; j++) {
if (Cats->field[j] == fields[1] &&
Cats->cat[j] == Cats->cat[i]) {
found = j;
break;
}
}
/* does not exist, change layer */
if (found < 0) {
Cats->field[i] = fields[1];
i++;
}
/* exists already in fields[1], delete from fields[0] */
else
Vect_field_cat_del(Cats, fields[0], Cats->cat[found]);
nmodified++;
}
}
}
Vect_write_line(&Out, type, Points, Cats);
}
break;
case (O_SUM):
while ((type = Vect_read_next_line(&In, Points, Cats)) > 0) {
id++;
if (type & otype && (!Clist ||
(Clist &&
Vect_cat_in_cat_list(id, Clist) == TRUE))) {
for (i = 0; i < Cats->n_cats; i++) {
if (Cats->field[i] == fields[0]) {
Cats->cat[i] += cat;
}
}
nmodified++;
}
Vect_write_line(&Out, type, Points, Cats);
}
break;
case (O_REP):
nfreps = 0;
freps = NULL;
while ((type = Vect_read_next_line(&In, Points, Cats)) > 0) {
id++;
if (Clist && Vect_cat_in_cat_list(id, Clist) == FALSE)
continue;
switch (type) {
case (GV_POINT):
rtype = FR_POINT;
break;
case (GV_LINE):
rtype = FR_LINE;
break;
case (GV_BOUNDARY):
rtype = FR_BOUNDARY;
break;
case (GV_CENTROID):
rtype = FR_CENTROID;
break;
case (GV_FACE):
rtype = FR_FACE;
break;
case (GV_KERNEL):
rtype = FR_KERNEL;
break;
default:
rtype = FR_UNKNOWN;
}
for (i = 0; i < Cats->n_cats; i++) {
field = Cats->field[i];
cat = Cats->cat[i];
ret = FALSE;
for (j = 0; j < nfreps; j++) {
if (freps[j]->field == field) {
fld = j;
ret = TRUE;
break;
}
}
if (!ret) { /* field report doesn't exist */
nfreps++;
freps =
(FREPORT **) G_realloc(freps,
nfreps * sizeof(FREPORT *));
fld = nfreps - 1;
freps[fld] = (FREPORT *) G_calloc(1, sizeof(FREPORT));
freps[fld]->field = field;
for (j = 0; j < FRTYPES; j++) {
/* cat '0' is valid category number */
freps[fld]->min[j] = -1;
}
if ((Fi = Vect_get_field(&In, field)) != NULL) {
freps[fld]->table = G_store(Fi->table);
}
else {
freps[fld]->table = '\0';
}
}
freps[fld]->count[rtype]++;
freps[fld]->count[FR_ALL]++;
if (freps[fld]->min[rtype] == -1 ||
freps[fld]->min[rtype] > cat)
freps[fld]->min[rtype] = cat;
if ((freps[fld]->max[rtype] == 0) ||
freps[fld]->max[rtype] < cat)
freps[fld]->max[rtype] = cat;
if (freps[fld]->min[FR_ALL] == -1 ||
freps[fld]->min[FR_ALL] > cat)
freps[fld]->min[FR_ALL] = cat;
if ((freps[fld]->max[FR_ALL] == 0) ||
freps[fld]->max[FR_ALL] < cat)
freps[fld]->max[FR_ALL] = cat;
}
}
/* Areas */
if ((otype & GV_AREA) && open_level > 1 && !Clist) {
n_areas = Vect_get_num_areas(&In);
for (i = 1; i <= n_areas; i++) {
int k;
centr = Vect_get_area_centroid(&In, i);
if (centr <= 0)
continue; /* Area without centroid */
Vect_read_line(&In, NULL, Cats, centr);
for (j = 0; j < Cats->n_cats; j++) {
field = Cats->field[j];
cat = Cats->cat[j];
ret = FALSE;
for (k = 0; k < nfreps; k++) {
if (freps[k]->field == field) {
fld = k;
ret = TRUE;
break;
}
}
if (!ret) { /* field report doesn't exist */
nfreps++;
freps =
(FREPORT **) G_realloc(freps,
nfreps * sizeof(FREPORT *));
fld = nfreps - 1;
freps[fld] = (FREPORT *) G_calloc(1, sizeof(FREPORT));
freps[fld]->field = field;
for (j = 0; j < FRTYPES; j++) {
/* cat '0' is valid category number */
freps[fld]->min[k] = -1;
}
if ((Fi = Vect_get_field(&In, field)) != NULL) {
freps[fld]->table = G_store(Fi->table);
}
else {
freps[fld]->table = '\0';
}
}
freps[fld]->count[FR_AREA]++;
if (freps[fld]->min[FR_AREA] == -1 ||
freps[fld]->min[FR_AREA] > cat)
freps[fld]->min[FR_AREA] = cat;
if ((freps[fld]->max[FR_AREA] == 0) ||
freps[fld]->max[FR_AREA] < cat)
freps[fld]->max[FR_AREA] = cat;
}
}
}
for (i = 0; i < nfreps; i++) {
if (shell->answer) {
if (freps[i]->count[FR_POINT] > 0)
fprintf(stdout, "%d point %d %d %d\n", freps[i]->field,
freps[i]->count[FR_POINT],
(freps[i]->min[FR_POINT] < 0 ? 0 : freps[i]->min[FR_POINT]),
freps[i]->max[FR_POINT]);
if (freps[i]->count[FR_LINE] > 0)
fprintf(stdout, "%d line %d %d %d\n", freps[i]->field,
freps[i]->count[FR_LINE],
(freps[i]->min[FR_LINE] < 0 ? 0 : freps[i]->min[FR_LINE]),
freps[i]->max[FR_LINE]);
if (freps[i]->count[FR_BOUNDARY] > 0)
fprintf(stdout, "%d boundary %d %d %d\n", freps[i]->field,
freps[i]->count[FR_BOUNDARY],
(freps[i]->min[FR_BOUNDARY] < 0 ? 0 : freps[i]->min[FR_BOUNDARY]),
freps[i]->max[FR_BOUNDARY]);
if (freps[i]->count[FR_CENTROID] > 0)
fprintf(stdout, "%d centroid %d %d %d\n", freps[i]->field,
freps[i]->count[FR_CENTROID],
(freps[i]->min[FR_BOUNDARY] < 0 ? 0 : freps[i]->min[FR_BOUNDARY]),
freps[i]->max[FR_CENTROID]);
if (freps[i]->count[FR_AREA] > 0)
fprintf(stdout, "%d area %d %d %d\n", freps[i]->field,
freps[i]->count[FR_AREA],
(freps[i]->min[FR_AREA] < 0 ? 0 : freps[i]->min[FR_AREA]),
freps[i]->max[FR_AREA]);
if (freps[i]->count[FR_FACE] > 0)
fprintf(stdout, "%d face %d %d %d\n", freps[i]->field,
freps[i]->count[FR_FACE],
(freps[i]->min[FR_FACE] < 0 ? 0 : freps[i]->min[FR_FACE]),
freps[i]->max[FR_FACE]);
if (freps[i]->count[FR_KERNEL] > 0)
fprintf(stdout, "%d kernel %d %d %d\n", freps[i]->field,
freps[i]->count[FR_KERNEL],
(freps[i]->min[FR_KERNEL] < 0 ? 0 : freps[i]->min[FR_KERNEL]),
freps[i]->max[FR_KERNEL]);
if (freps[i]->count[FR_ALL] > 0)
fprintf(stdout, "%d all %d %d %d\n", freps[i]->field,
freps[i]->count[FR_ALL],
(freps[i]->min[FR_ALL] < 0 ? 0 : freps[i]->min[FR_ALL]),
freps[i]->max[FR_ALL]);
}
else {
if (freps[i]->table != '\0') {
fprintf(stdout, "%s: %d/%s\n", _("Layer/table"),
freps[i]->field, freps[i]->table);
}
else {
fprintf(stdout, "%s: %d\n", _("Layer"), freps[i]->field);
}
fprintf(stdout, _("type count min max\n"));
fprintf(stdout, "%s %7d %10d %10d\n", _("point"),
freps[i]->count[FR_POINT],
(freps[i]->min[FR_POINT] < 0) ? 0 : freps[i]->min[FR_POINT],
freps[i]->max[FR_POINT]);
fprintf(stdout, "%s %7d %10d %10d\n", _("line"),
freps[i]->count[FR_LINE],
(freps[i]->min[FR_LINE] < 0) ? 0 : freps[i]->min[FR_LINE],
freps[i]->max[FR_LINE]);
fprintf(stdout, "%s %7d %10d %10d\n", _("boundary"),
freps[i]->count[FR_BOUNDARY],
(freps[i]->min[FR_BOUNDARY] < 0) ? 0 : freps[i]->min[FR_BOUNDARY],
freps[i]->max[FR_BOUNDARY]);
fprintf(stdout, "%s %7d %10d %10d\n", _("centroid"),
freps[i]->count[FR_CENTROID],
(freps[i]->min[FR_CENTROID] < 0) ? 0 : freps[i]->min[FR_CENTROID],
freps[i]->max[FR_CENTROID]);
fprintf(stdout, "%s %7d %10d %10d\n", _("area"),
freps[i]->count[FR_AREA],
(freps[i]->min[FR_AREA] < 0) ? 0 : freps[i]->min[FR_AREA],
freps[i]->max[FR_AREA]);
fprintf(stdout, "%s %7d %10d %10d\n", _("face"),
freps[i]->count[FR_FACE],
(freps[i]->min[FR_FACE] < 0) ? 0 : freps[i]->min[FR_FACE],
freps[i]->max[FR_FACE]);
fprintf(stdout, "%s %7d %10d %10d\n", _("kernel"),
freps[i]->count[FR_KERNEL],
(freps[i]->min[FR_KERNEL] < 0) ? 0 : freps[i]->min[FR_KERNEL],
freps[i]->max[FR_KERNEL]);
fprintf(stdout, "%s %7d %10d %10d\n", _("all"),
freps[i]->count[FR_ALL],
(freps[i]->min[FR_ALL] < 0) ? 0 : freps[i]->min[FR_ALL],
freps[i]->max[FR_ALL]);
}
}
break;
case (O_PRN):
while ((type = Vect_read_next_line(&In, Points, Cats)) > 0) {
id++;
int has = 0;
if (!(type & otype))
continue;
if (Clist && Vect_cat_in_cat_list(id, Clist) == FALSE)
continue;
/* Check if the line has at least one cat */
for (i = 0; i < nfields; i++) {
for (j = 0; j < Cats->n_cats; j++) {
if (Cats->field[j] == fields[i]) {
has = 1;
break;
}
}
}
if (!has)
continue;
for (i = 0; i < nfields; i++) {
int first = 1;
if (i > 0)
fprintf(stdout, "|");
for (j = 0; j < Cats->n_cats; j++) {
if (Cats->field[j] == fields[i]) {
if (!first)
fprintf(stdout, "/");
fprintf(stdout, "%d", Cats->cat[j]);
first = 0;
}
}
}
fprintf(stdout, "\n");
}
break;
}
if (option == O_ADD || option == O_DEL || option == O_CHFIELD ||
option == O_SUM || option == O_TRANS){
if (!notab->answer){
G_message(_("Copying attribute table(s)..."));
if (Vect_copy_tables(&In, &Out, 0))
G_warning(_("Failed to copy attribute table to output map"));
}
Vect_build(&Out);
Vect_close(&Out);
}
if (option == O_TRANS && nmodified > 0)
for(i = 1; i < nfields; i++)
G_important_message(_("Categories copied from layer %d to layer %d"),
fields[0], fields[i]);
if (option != O_REP && option != O_PRN)
G_done_msg(n_("%d feature modified.",
"%d features modified.",
nmodified), nmodified);
Vect_close(&In);
exit(EXIT_SUCCESS);
}
int main(int argc, char *argv[])
{
struct GModule *module;
struct {
struct Option *input, *output, *zshift, *height, *elevation, *hcolumn,
*type, *field, *cats, *where, *interp, *scale, *null;
} opt;
struct {
struct Flag *trace;
} flag;
struct Map_info In, Out;
struct line_pnts *Points;
struct line_cats *Cats;
struct bound_box map_box;
struct cat_list *cat_list;
struct Cell_head window;
int field;
int only_type, cat;
int fdrast, interp_method, trace;
double objheight, objheight_default, voffset;
double scale, null_val;
struct field_info *Fi;
dbDriver *driver = NULL;
char *comment;
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("geometry"));
G_add_keyword(_("sampling"));
G_add_keyword(_("3D"));
module->label =
_("Extrudes flat vector features to 3D vector features with defined height.");
module->description =
_("Optionally the height can be derived from sampling of elevation raster map.");
flag.trace = G_define_flag();
flag.trace->key = 't';
flag.trace->description = _("Trace elevation");
flag.trace->guisection = _("Elevation");
opt.input = G_define_standard_option(G_OPT_V_INPUT);
opt.field = G_define_standard_option(G_OPT_V_FIELD_ALL);
opt.field->guisection = _("Selection");
opt.cats = G_define_standard_option(G_OPT_V_CATS);
opt.cats->guisection = _("Selection");
opt.where = G_define_standard_option(G_OPT_DB_WHERE);
opt.where->guisection = _("Selection");
opt.type = G_define_standard_option(G_OPT_V_TYPE);
opt.type->answer = "point,line,area";
opt.type->options = "point,line,area";
opt.type->guisection = _("Selection");
opt.output = G_define_standard_option(G_OPT_V_OUTPUT);
opt.zshift = G_define_option();
opt.zshift->key = "zshift";
opt.zshift->description = _("Shifting value for z coordinates");
opt.zshift->type = TYPE_DOUBLE;
opt.zshift->required = NO;
opt.zshift->answer = "0";
opt.zshift->guisection = _("Height");
opt.height = G_define_option();
opt.height->key = "height";
opt.height->type = TYPE_DOUBLE;
opt.height->required = NO;
opt.height->multiple = NO;
opt.height->description = _("Fixed height for 3D vector features");
opt.height->guisection = _("Height");
opt.hcolumn = G_define_standard_option(G_OPT_DB_COLUMN);
opt.hcolumn->key = "height_column";
opt.hcolumn->multiple = NO;
opt.hcolumn->description = _("Name of attribute column with feature height");
opt.hcolumn->guisection = _("Height");
/* raster sampling */
opt.elevation = G_define_standard_option(G_OPT_R_ELEV);
opt.elevation->required = NO;
opt.elevation->description = _("Elevation raster map for height extraction");
opt.elevation->guisection = _("Elevation");
opt.interp = G_define_standard_option(G_OPT_R_INTERP_TYPE);
opt.interp->answer = "nearest";
opt.interp->guisection = _("Elevation");
opt.scale = G_define_option();
opt.scale->key = "scale";
opt.scale->type = TYPE_DOUBLE;
opt.scale->description = _("Scale factor sampled raster values");
opt.scale->answer = "1.0";
opt.scale->guisection = _("Elevation");
opt.null = G_define_option();
opt.null->key = "null_value";
opt.null->type = TYPE_DOUBLE;
opt.null->description =
_("Height for sampled raster NULL values");
opt.null->guisection = _("Elevation");
G_gisinit(argv[0]);
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
if (!opt.height->answer && !opt.hcolumn->answer) {
G_fatal_error(_("One of '%s' or '%s' parameters must be set"),
opt.height->key, opt.hcolumn->key);
}
sscanf(opt.zshift->answer, "%lf", &voffset);
G_debug(1, "voffset = %f", voffset);
if (opt.height->answer)
sscanf(opt.height->answer, "%lf", &objheight);
else
objheight = 0.;
G_debug(1, "objheight = %f", objheight);
objheight_default = objheight;
only_type = Vect_option_to_types(opt.type);
/* sampling method */
interp_method = Rast_option_to_interp_type(opt.interp);
/* used to scale sampled raster values */
scale = atof(opt.scale->answer);
/* is null value defined */
if (opt.null->answer)
null_val = atof(opt.null->answer);
/* trace elevation */
trace = flag.trace->answer ? TRUE : FALSE;
/* set input vector map name and mapset */
Vect_check_input_output_name(opt.input->answer, opt.output->answer, G_FATAL_EXIT);
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
Vect_set_open_level(2); /* topology required for input */
/* opening input vector map */
if (Vect_open_old2(&In, opt.input->answer, "", opt.field->answer) < 0)
G_fatal_error(_("Unable to open vector map <%s>"), opt.input->answer);
Vect_set_error_handler_io(&In, &Out);
/* creating output vector map */
if (Vect_open_new(&Out, opt.output->answer, WITH_Z) < 0)
G_fatal_error(_("Unable to create vector map <%s>"),
opt.output->answer);
field = Vect_get_field_number(&In, opt.field->answer);
if ((opt.hcolumn->answer || opt.cats->answer || opt.where->answer) && field == -1) {
G_warning(_("Invalid layer number (%d). "
"Parameter '%s', '%s' or '%s' specified, assuming layer '1'."),
field, opt.hcolumn->key, opt.cats->key, opt.where->key);
field = 1;
}
/* set constraint for cats or where */
cat_list = NULL;
if (field > 0)
cat_list = Vect_cats_set_constraint(&In, field, opt.where->answer,
opt.cats->answer);
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
/* opening database connection, if required */
if (opt.hcolumn->answer) {
int ctype;
dbColumn *column;
if ((Fi = Vect_get_field(&In, field)) == NULL)
G_fatal_error(_("Database connection not defined for layer %d"),
field);
if ((driver =
db_start_driver_open_database(Fi->driver, Fi->database)) == NULL)
G_fatal_error(_("Unable to open database <%s> by driver <%s>"),
Fi->database, Fi->driver);
db_set_error_handler_driver(driver);
if (db_get_column(driver, Fi->table, opt.hcolumn->answer, &column) != DB_OK)
G_fatal_error(_("Column <%s> does not exist"),
opt.hcolumn->answer);
else
db_free_column(column);
ctype = db_column_Ctype(driver, Fi->table, opt.hcolumn->answer);
if (ctype != DB_C_TYPE_INT && ctype != DB_C_TYPE_STRING &&
ctype != DB_C_TYPE_DOUBLE) {
G_fatal_error(_("Column <%s>: invalid data type"),
opt.hcolumn->answer);
}
}
/* do we work with elevation raster? */
fdrast = -1;
if (opt.elevation->answer) {
/* raster setup */
G_get_window(&window);
/* open the elev raster, and check for error condition */
fdrast = Rast_open_old(opt.elevation->answer, "");
}
/* if area */
if (only_type & GV_AREA) {
int area, nareas, centroid;
nareas = Vect_get_num_areas(&In);
G_debug(2, "n_areas = %d", nareas);
if (nareas > 0)
G_message(_("Extruding areas..."));
for (area = 1; area <= nareas; area++) {
G_debug(3, "area = %d", area);
G_percent(area, nareas, 2);
if (!Vect_area_alive(&In, area))
continue;
centroid = Vect_get_area_centroid(&In, area);
if (!centroid) {
G_warning(_("Skipping area %d without centroid"), area);
continue;
}
Vect_read_line(&In, NULL, Cats, centroid);
if (field > 0 && !Vect_cats_in_constraint(Cats, field, cat_list))
continue;
/* height attribute */
if (opt.hcolumn->answer) {
cat = Vect_get_area_cat(&In, area, field);
if (cat == -1) {
G_warning(_("No category defined for area %d. Using default fixed height %f."),
area, objheight_default);
objheight = objheight_default;
}
if (get_height(Fi, opt.hcolumn->answer,
driver, cat, &objheight) != 0) {
G_warning(_("Unable to fetch height from DB for area %d. Using default fixed height %f."),
area, objheight_default);
objheight = objheight_default;
}
} /* if opt.hcolumn->answer */
Vect_get_area_points(&In, area, Points);
G_debug(3, "area: %d height: %f", area, objheight);
extrude(&In, &Out, Cats, Points,
fdrast, trace, interp_method, scale,
opt.null->answer ? TRUE : FALSE, null_val,
objheight, voffset, &window, GV_AREA,
centroid);
} /* foreach area */
}
if (only_type > 0) {
int line, nlines;
int type;
G_debug(1, "other than areas");
/* loop through each line in the dataset */
nlines = Vect_get_num_lines(&In);
G_message(_("Extruding features..."));
for (line = 1; line <= nlines; line++) {
/* progress feedback */
G_percent(line, nlines, 2);
if (!Vect_line_alive(&In, line))
continue;
/* read line */
type = Vect_read_line(&In, Points, Cats, line);
if (!(type & only_type))
continue;
if (field > 0 && !Vect_cats_in_constraint(Cats, field, cat_list))
continue;
/* height attribute */
if (opt.hcolumn->answer) {
cat = Vect_get_line_cat(&In, line, field);
if (cat == -1) {
G_warning(_("No category defined for feature %d. Using default fixed height %f."),
line, objheight_default);
objheight = objheight_default;
}
if (get_height(Fi, opt.hcolumn->answer,
driver, cat, &objheight) != 0) {
G_warning(_("Unable to fetch height from DB for line %d. Using default fixed height %f."),
line, objheight_default);
objheight = objheight_default;
}
} /* if opt.hcolumn->answer */
extrude(&In, &Out, Cats, Points,
fdrast, trace, interp_method, scale,
opt.null->answer ? TRUE : FALSE, null_val,
objheight, voffset, &window, type, -1);
} /* for each line */
} /* else if area */
if (driver) {
db_close_database(driver);
db_shutdown_driver(driver);
}
G_important_message(_("Copying attribute table..."));
if (field < 0)
Vect_copy_tables(&In, &Out, 0);
else
Vect_copy_table_by_cat_list(&In, &Out, field, field, NULL,
GV_1TABLE, cat_list);
Vect_build(&Out);
/* header */
G_asprintf(&comment, "Generated by %s from vector map <%s>",
G_program_name(), Vect_get_full_name(&In));
Vect_set_comment(&Out, comment);
G_free(comment);
Vect_get_map_box(&Out, &map_box);
Vect_close(&In);
Vect_close(&Out);
Vect_destroy_line_struct(Points);
Vect_destroy_cats_struct(Cats);
G_done_msg("T: %f B: %f.", map_box.T, map_box.B);
exit(EXIT_SUCCESS);
}
