void application_start( )
{
wiced_ip_address_t ip_address;
wiced_result_t result;
wiced_init( );
wiced_network_up(WICED_STA_INTERFACE, WICED_USE_EXTERNAL_DHCP_SERVER, NULL);
/* Configure the device */
/* wiced_configure_device( app_config ); */ /* Config bypassed in local makefile and wifi_config_dct.h */
WPRINT_APP_INFO( ( "Resolving IP address of HTTPS server\n" ) );
wiced_hostname_lookup("www.google.com", &ip_address, 10000);
WPRINT_APP_INFO( ( "Server is at %u.%u.%u.%u\n", (uint8_t)(GET_IPV4_ADDRESS(ip_address) >> 24),
(uint8_t)(GET_IPV4_ADDRESS(ip_address) >> 16),
(uint8_t)(GET_IPV4_ADDRESS(ip_address) >> 8),
(uint8_t)(GET_IPV4_ADDRESS(ip_address) >> 0) ) );
WPRINT_APP_INFO( ( "Getting '/'...\n" ) );
/* Initialize the root CA certificate */
wiced_tls_init_root_ca_certificates( google_root_ca_certificate );
result = wiced_https_get( &ip_address, SIMPLE_GET_REQUEST, buffer, BUFFER_LENGTH, "www.google.com" );
if ( result == WICED_SUCCESS )
{
WPRINT_APP_INFO( ( "Server returned\n%s", buffer ) );
}
else
{
WPRINT_APP_INFO( ( "Get failed: %u\n", result ) );
}
wiced_deinit();
}
// Main application thread which is started by the RTOS after boot
void application_start(void)
{
wiced_init( );
dbStart();
WPRINT_APP_INFO(("Starting WWEP Server\n"));
while(wiced_network_up( INTERFACE, DHCP_MODE, &ip_settings ) != WICED_SUCCESS); // Keep trying until you get hooked up
// I created all of the server code in a separate thread to make it easier to put the server
// and client together in one application.
wiced_rtos_create_thread(&tcp_thread, TCP_SERVER_NONSECURE_THREAD_PRIORITY, "Server TCP Server", tcp_server_nonsecure_thread_main, TCP_SERVER_NONSECURE_STACK_SIZE, 0);
wiced_rtos_create_thread(&ping_thread, PING_THREAD_PRIORITY, "Ping", pingAP, 1024, 0);
// Setup Display
WPRINT_APP_INFO(("#\t IP\t\tPort\tMessage\n"));
WPRINT_APP_INFO(("----------------------------------------------------------------------\n"));
// just blink the led while the whole thing is running
while(1)
{
wiced_gpio_output_low( WICED_LED1 );
wiced_rtos_delay_milliseconds( 250 );
wiced_gpio_output_high( WICED_LED1 );
wiced_rtos_delay_milliseconds( 250 );
}
}
/*
* A simple result log function
*/
static void amqp_print_status ( wiced_result_t result, const char * ok_message, const char * error_message )
{
if ( result == WICED_SUCCESS )
{
if ( ok_message != NULL )
{
WPRINT_APP_INFO(( "OK (%s)\n\n", (ok_message)));
}
else
{
WPRINT_APP_INFO(( "OK.\n\n" ));
}
}
else
{
if ( error_message != NULL )
{
WPRINT_APP_INFO(( "ERROR (%s)\n\n", (error_message)));
}
else
{
WPRINT_APP_INFO(( "ERROR.\n\n" ));
}
}
}
static wiced_result_t send_ping( void )
{
const uint32_t ping_timeout = 1000;
uint32_t elapsed_ms;
wiced_result_t status;
wiced_ip_address_t ping_target_ip;
wiced_ip_get_gateway_address( WICED_STA_INTERFACE, &ping_target_ip );
status = wiced_ping( WICED_STA_INTERFACE, &ping_target_ip, ping_timeout, &elapsed_ms );
if ( status == WICED_SUCCESS )
{
WPRINT_APP_INFO(( "Ping Reply %lums\r\n", elapsed_ms ));
}
else if ( status == WICED_TIMEOUT )
{
WPRINT_APP_INFO(( "Ping timeout\r\n" ));
}
else
{
WPRINT_APP_INFO(( "Ping error\r\n" ));
}
return WICED_SUCCESS;
}
void application_start(void)
{
/* Initialise the device and WICED framework */
wiced_init( );
/* Bring up the network interface */
wiced_network_up( WICED_STA_INTERFACE, WICED_USE_EXTERNAL_DHCP_SERVER, NULL );
/* Create a TCP server socket */
if (wiced_tcp_create_socket(&tcp_server_handle.socket, WICED_STA_INTERFACE) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP socket creation failed\n"));
}
if (wiced_tcp_listen( &tcp_server_handle.socket, TCP_SERVER_LISTEN_PORT ) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP server socket initialization failed\n"));
wiced_tcp_delete_socket(&tcp_server_handle.socket);
return;
}
/* Start a tcp server thread */
WPRINT_APP_INFO(("Creating tcp server thread \n"));
wiced_rtos_create_thread(&tcp_thread, TCP_SERVER_THREAD_PRIORITY, "Demo tcp server", tcp_server_thread_main, TCP_SERVER_STACK_SIZE, &tcp_server_handle);
}
static void audio_state_handler( wiced_bt_avk_audio_state_t state, wiced_bt_bdaddr_t* device_address )
{
switch ( state )
{
case WICED_BT_AVK_AUDIO_STATE_STARTED: WPRINT_APP_INFO( ("Audio streaming started\n") ); break;
case WICED_BT_AVK_AUDIO_STATE_REMOTE_SUSPEND: WPRINT_APP_INFO( ("Audio streaming suspended\n") ); break;
case WICED_BT_AVK_AUDIO_STATE_STOPPED: WPRINT_APP_INFO( ("Audio streaming stopped\n") ); break;
default: break;
}
}
/*!
******************************************************************************
* Prints partial details of a scan result on a single line
*
* @param[in] record A pointer to the wiced_scan_result_t record
*
*/
void print_scan_result( wiced_scan_result_t* record )
{
WPRINT_APP_INFO( ( "%5s ", ( record->bss_type == WICED_BSS_TYPE_ADHOC ) ? "Adhoc" : "Infra" ) );
WPRINT_APP_INFO( ( "%02X:%02X:%02X:%02X:%02X:%02X ", record->BSSID.octet[0], record->BSSID.octet[1], record->BSSID.octet[2], record->BSSID.octet[3], record->BSSID.octet[4], record->BSSID.octet[5] ) );
WPRINT_APP_INFO( ( " %d ", record->signal_strength ) );
if ( record->max_data_rate < 100000 )
{
WPRINT_APP_INFO( ( " %.1f ", (double) (record->max_data_rate / 1000.0) ) );
}
else
{
WPRINT_APP_INFO( ( "%.1f ", (double) (record->max_data_rate / 1000.0) ) );
}
WPRINT_APP_INFO( ( " %3d ", record->channel ) );
WPRINT_APP_INFO( ( "%-10s ", ( record->security == WICED_SECURITY_OPEN ) ? "Open" :
( record->security == WICED_SECURITY_WEP_PSK ) ? "WEP" :
( record->security == WICED_SECURITY_WPA_TKIP_PSK ) ? "WPA TKIP" :
( record->security == WICED_SECURITY_WPA_AES_PSK ) ? "WPA AES" :
( record->security == WICED_SECURITY_WPA2_AES_PSK ) ? "WPA2 AES" :
( record->security == WICED_SECURITY_WPA2_TKIP_PSK ) ? "WPA2 TKIP" :
( record->security == WICED_SECURITY_WPA2_MIXED_PSK ) ? "WPA2 Mixed" :
"Unknown" ) );
WPRINT_APP_INFO( ( " %-32s ", record->SSID.value ) );
WPRINT_APP_INFO( ( "\n" ) );
}
// This function formats all of the data and prints it out ... called by the tcp_server
static void displayResult(wiced_ip_address_t peerAddress, uint16_t peerPort, char *returnMessage)
{
WPRINT_APP_INFO(("%d\t",nonsecureConnectionCount));
WPRINT_APP_INFO(("%u.%u.%u.%u",
(uint8_t)(GET_IPV4_ADDRESS(peerAddress) >> 24),
(uint8_t)(GET_IPV4_ADDRESS(peerAddress) >> 16),
(uint8_t)(GET_IPV4_ADDRESS(peerAddress) >> 8),
(uint8_t)(GET_IPV4_ADDRESS(peerAddress) >> 0)
));
WPRINT_APP_INFO(("\t%d\t%s\n",peerPort,returnMessage));
}
int
rwl_write_eth_port(void* hndle, char* write_buf, unsigned long size, unsigned long *numwritten)
{
uint16_t available_data_length;
wiced_packet_t* tx_packet;
char* tx_data;
unsigned long temp_size = 0;
unsigned long temp=0;
if ( size == 0 )
{
return SUCCESS;
}
while (size > 0)
{
if (wiced_packet_create_tcp(&tcp_client_socket, 128, &tx_packet, (uint8_t **)&tx_data, &available_data_length) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP packet creation failed\n"));
return WICED_ERROR;
}
if (size > available_data_length)
{
temp_size = available_data_length;
}
else
{
temp_size =size;
}
/* Write the message into tx_data"*/
memcpy(tx_data, (write_buf + temp), temp_size);
wiced_packet_set_data_end( tx_packet, (uint8_t*)tx_data + temp_size );
/* Send the TCP packet*/
if ( wiced_tcp_send_packet( &tcp_client_socket, tx_packet ) != WICED_SUCCESS )
{
WPRINT_APP_INFO(("TCP packet send failed \n"));
/*Delete packet, since the send failed*/
wiced_packet_delete(tx_packet);
return WICED_ERROR;
}
wiced_packet_delete(tx_packet);
size = size - temp_size;
temp = temp+temp_size;
}
return available_data_length;
}
/* This is the callback event for HTTP events */
static void event_handler( http_client_t* client, http_event_t event, http_response_t* response )
{
static uint8_t count = 1; // Keep track of how many responses we have received
switch( event )
{
case HTTP_CONNECTED:
/* This state is never called */
break;
/* This is called when we are disconnected by the server */
case HTTP_DISCONNECTED:
{
connected = WICED_FALSE;
http_client_disconnect( client ); /* Need to keep client connection state synchronized with the server */
WPRINT_APP_INFO(( "Disconnected from %s\n", SERVER_HOST ));
break;
}
/* This is called when new data is received (header, or payload) */
case HTTP_DATA_RECEIVED:
{
WPRINT_APP_INFO( ( "------------------ Received response: %d ------------------\n", count ) );
/* Print Response Header */
if(response->response_hdr != NULL)
{
WPRINT_APP_INFO( ( "----- Response Header: -----\n " ) );
print_data( (char*) response->response_hdr, response->response_hdr_length );
}
/* Print Response Payload */
WPRINT_APP_INFO( ("\n----- Response Payload: -----\n" ) );
print_data( (char*) response->payload, response->payload_data_length );
if(response->remaining_length == 0)
{
WPRINT_APP_INFO( ("\n------------------ End Response %d ------------------\n", count ) );
http_request_deinit( (http_request_t*) &(response->request) );
wiced_rtos_set_semaphore(&httpWait); // Set semaphore that allows the next request to start
count++;
}
break;
}
default:
break;
}
}
static void audio_connection_state_handler( wiced_bt_avk_connection_state_t state, wiced_bt_bdaddr_t* device_address )
{
switch ( state )
{
case WICED_BT_AVK_CONNECTION_STATE_CONNECTED:
WPRINT_APP_INFO( ("Device connected [0x%x:0x%x:0x%x:0x%x:0x%x:0x%x]\n", device_address->address[0], device_address->address[1], device_address->address[2], device_address->address[3], device_address->address[4], device_address->address[5]) );
break;
case WICED_BT_AVK_CONNECTION_STATE_DISCONNECTED:
WPRINT_APP_INFO( ("Device disconnected\n") );
break;
default:
break;
}
}
void application_start( )
{
/* Initialise the WICED device */
wiced_init();
WPRINT_APP_INFO( ( "The color of the RGB is changing every second.\n" ) );
RGB_Init( D0 );
while ( 1 )
{
RGB_Show(0xFF, 0x00, 0x00);
wiced_rtos_delay_milliseconds( 500 );
RGB_Show(0x00, 0xFF, 0x00);
wiced_rtos_delay_milliseconds( 500 );
RGB_Show(0x00, 0x00, 0xFF);
wiced_rtos_delay_milliseconds( 500 );
RGB_Show(0xFF, 0x00, 0xFF);
wiced_rtos_delay_milliseconds( 500 );
RGB_Show(0xFF, 0xFF, 0x00);
wiced_rtos_delay_milliseconds( 500 );
RGB_Show(0x00, 0xFF, 0xFF);
wiced_rtos_delay_milliseconds( 500 );
}
}
static void curtain_keypad_handler( uart_key_code_t code, uart_key_event_t event )
{
//WPRINT_APP_INFO(("curtain_keypad_handler: key_code = 0x%.2x, key_event = %d\n", code, event));
if ( event == KEY_EVENT_RELEASED )
{
switch ( code )
{
case CURTAIN_KEY_OPEN:
curtain_open(this_dev.specific.curtain);
break;
case CURTAIN_KEY_CLOSE:
curtain_close(this_dev.specific.curtain);
break;
case CURTAIN_KEY_STOP:
curtain_stop(this_dev.specific.curtain);
break;
default:
break;
}
}
else if( event == KEY_EVENT_LONG_LONG_PRESSED) {
WPRINT_APP_INFO(("KEY_EVENT_LONG_LONG_PRESSED\n"));
if (code == CURTAIN_KEY_OPEN) {
curtain_cali_start(this_dev.specific.curtain);
}
}
return;
}
void application_start( )
{
uint8_t led_state = 0;
wiced_bool_t button_pressed;
/* Initialise the WICED device */
wiced_init();
// The RGB and setup button are initialized in platform.c
WPRINT_APP_INFO( ( "The RGB are flashing R-G-B alternately. Holding the setup button will force it flashing white.\n" ) );
while ( 1 )
{
/* Read the state of setup button */
button_pressed = wiced_gpio_input_get( SETUP_BUTTON ) ? WICED_FALSE : WICED_TRUE; /* The button has inverse logic */
if ( button_pressed == WICED_TRUE )
{
/* Flashing white */
if( (led_state%2) == 0 )
{
wiced_gpio_output_low( RGB_R );
wiced_gpio_output_low( RGB_G );
wiced_gpio_output_low( RGB_B );
}
else
{
wiced_gpio_output_high( RGB_R );
wiced_gpio_output_high( RGB_G );
wiced_gpio_output_high( RGB_B );
}
}
else
{
/* Flashing R-G-B alternately */
if ( (led_state%3) == 0 )
{
wiced_gpio_output_low( RGB_R );
wiced_gpio_output_high( RGB_G );
wiced_gpio_output_high( RGB_B );
}
else if ( (led_state%3) == 1 )
{
wiced_gpio_output_high( RGB_R );
wiced_gpio_output_low( RGB_G );
wiced_gpio_output_high( RGB_B );
}
else
{
wiced_gpio_output_high( RGB_R );
wiced_gpio_output_high( RGB_G );
wiced_gpio_output_low( RGB_B );
}
}
wiced_rtos_delay_milliseconds( 300 );
led_state++;
}
}
void application_start( )
{
WPRINT_APP_INFO( ( "Application stack = %u\r\n", APPLICATION_STACK_SIZE ) );
blow_the_stack();
}
/******************************************************
* Function Definitions
******************************************************/
void application_start( )
{
/* Initialise the device */
wiced_init( );
//WPRINT_APP_INFO(("Version data & time 2015/09/06 10:00\n"));
/* Configure the device */
configure_device();
if(device_init() != WICED_SUCCESS){
WPRINT_APP_INFO(("device_init failed\n"));
return;
}
WPRINT_APP_INFO(("end ...\n"));
}
static void device_state_handler( wiced_bt_state_t state, wiced_result_t status )
{
switch ( state )
{
case WICED_BT_STATE_ENABLED:
WPRINT_APP_INFO( ("Bluetooth enabled\n") );
wiced_bt_avk_init( &app_callbacks.audio_callbacks );
break;
case WICED_BT_STATE_DISABLED:
WPRINT_APP_INFO( ("Bluetooth disabled\n") );
break;
default:
break;
}
}
void printStatus()
{
linked_list_node_t* current;
linked_list_get_front_node( &tcp_server.socket_list, ¤t);
while(current)
{
wiced_tcp_socket_t *socket;
wiced_tcp_server_socket_t *serverSocket;
serverSocket = (wiced_tcp_server_socket_t *) current->data;
socket = &serverSocket->socket;
wiced_socket_state_t ss;
wiced_tcp_get_socket_state( socket, &ss);
switch(ss)
{
case WICED_SOCKET_CLOSED: WPRINT_APP_INFO(("Status:closed\n")); break;
case WICED_SOCKET_CLOSING: WPRINT_APP_INFO(("Status:closing\n")); break;
case WICED_SOCKET_CONNECTING: WPRINT_APP_INFO(("Status:connecting\n")); break;
case WICED_SOCKET_CONNECTED: WPRINT_APP_INFO(("Status:connected\n")); break;
case WICED_SOCKET_DATA_PENDING: WPRINT_APP_INFO(("Status:data pending\n")); break;
case WICED_SOCKET_LISTEN: WPRINT_APP_INFO(("Status:listen\n")); break;
case WICED_SOCKET_ERROR: WPRINT_APP_INFO(("Status:error\n")); break;
}
current = current->next;
}
}
int main( void )
{
wiced_mac_t dest_mac = { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} };
char* payload_ptr = 0;
wwd_result_t result;
NoOS_setup_timing( );
WPRINT_APP_INFO(("\nPlatform " PLATFORM " initialised\n"));
/* Initialise Wiced */
WPRINT_APP_INFO(("Starting Wiced v" WICED_VERSION "\n"));
nons_buffer_init_t pkt_buff_init = { pkt_buffer, sizeof( pkt_buffer ) };
while ( WWD_SUCCESS != ( result = wwd_management_init( COUNTRY, &pkt_buff_init ) ) )
{
WPRINT_APP_INFO(("Error %d while starting WICED!\n", result));
}
/* Get MAC address - this needs to be done before joining a network, so that */
/* we can check the address of any incoming packets against our MAC */
wwd_wifi_get_mac_address( &my_mac, WWD_STA_INTERFACE );
/* Attempt to join the Wi-Fi network */
WPRINT_APP_INFO(("Joining : " AP_SSID "\n"));
while ( wwd_wifi_join( &ap_ssid, AP_SEC, (uint8_t*) AP_PASS, sizeof( AP_PASS ) - 1, NULL ) != WWD_SUCCESS )
{
WPRINT_APP_INFO(("Failed to join : " AP_SSID " .. retrying\n"));
}
WPRINT_APP_INFO(("Successfully joined : " AP_SSID "\n"));
if ( PKT_TARGET_IP != 0xFFFFFFFF ) /* Check if the target has a broadcast address */
{
/* Send an ARP request to resolve the destination IP address into a MAC address */
resolve_dest_mac( PKT_TARGET_IP, &dest_mac );
}
/* Loop forever, repeatedly sending the UDP packet */
while ( 1 )
{
int i;
/* Setup the packet buffer with the canned packet contents. */
payload_ptr = setup_canned_packet( pkt_buffer, sizeof( pkt_buffer ), my_ip_addr, &my_mac, PKT_TARGET_IP, &dest_mac, LOCAL_UDP_PORT, PKT_TARGET_UDP_PORT );
/* Copy the payload into the packet */
memcpy( payload_ptr, PAYLOAD, sizeof( PAYLOAD ) - 1 );
WPRINT_APP_INFO(("Sending Hello!\n"));
send_canned_packet( pkt_buffer, sizeof( PAYLOAD ) - 1 );
for ( i = 0; i < 10; i++ )
{
host_rtos_delay_milliseconds( 100 );
/* Poll for packets to receive (which will be dropped) - 802.11 device will run out of memory if packets are not read out of it */
while ( wwd_thread_poll_all( ) != 0 )
{ }
}
}
}
/******************************************************
* Function Definitions
******************************************************/
wiced_result_t aws_app_init( aws_app_info_t *app_info )
{
wiced_result_t ret = WICED_SUCCESS;
aws_config_dct_t *aws_app_dct = NULL;
aws_app_info = app_info;
wiced_init( );
/* Disable roaming to other access points */
wiced_wifi_set_roam_trigger( -99 ); /* -99dBm ie. extremely low signal level */
WPRINT_APP_INFO((" Please wait, connecting to network...\n"));
WPRINT_APP_INFO(("(To return to SSID console screen, hold USER switch for 5 seconds during RESET to clear DCT configuration)\n"));
wiced_rtos_delay_milliseconds( 1000 );
for ( int i = 0; i < 25; i++ )
{
wiced_gpio_output_high( WICED_LED2 );
wiced_rtos_delay_milliseconds( 100 );
wiced_gpio_output_low( WICED_LED2 );
wiced_rtos_delay_milliseconds( 100 );
if ( !wiced_gpio_input_get( WICED_BUTTON1 ) )
{
wiced_rtos_delay_milliseconds( 5000 );
if ( !wiced_gpio_input_get( WICED_BUTTON1 ) )
{
aws_config_dct_t aws_dct =
{
.is_configured = WICED_FALSE,
.thing_name = AWS_DEFAULT_THING_NAME
};
wiced_gpio_output_high( WICED_LED1 );
WPRINT_APP_INFO(( "DCT clearing start\n" ));
wiced_dct_write( &aws_dct, DCT_APP_SECTION, 0, sizeof( aws_config_dct_t ) );
wiced_rtos_delay_milliseconds( 1000 );
wiced_gpio_output_low( WICED_LED1 );
WPRINT_APP_INFO(( "DCT clearing end\n" ));
break;
}
}
/* Helper function to print data in the response to the UART */
static void print_data( char* data, uint32_t length )
{
uint32_t a;
for ( a = 0; a < length; a++ )
{
WPRINT_APP_INFO( ( "%c", data[a] ) );
}
}
static wiced_result_t tcp_server_process( tcp_server_handle_t* server, wiced_packet_t* rx_packet )
{
char* request;
uint16_t request_length;
uint16_t available_data_length;
wiced_packet_t* tx_packet;
char* tx_data;
wiced_packet_get_data( rx_packet, 0, (uint8_t**) &request, &request_length, &available_data_length );
/* Null terminate the received string */
request[request_length] = '\x0';
WPRINT_APP_INFO(("Received data: %s \n", request));
/* Send echo back */
if (wiced_packet_create_tcp(&server->socket, TCP_PACKET_MAX_DATA_LENGTH, &tx_packet, (uint8_t**)&tx_data, &available_data_length) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP packet creation failed\n"));
return WICED_ERROR;
}
/* Write the message into tx_data" */
tx_data[request_length] = '\x0';
memcpy(tx_data, request, request_length);
/* Set the end of the data portion */
wiced_packet_set_data_end(tx_packet, (uint8_t*)tx_data + request_length);
/* Send the TCP packet */
if (wiced_tcp_send_packet(&server->socket, tx_packet) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP packet send failed\n"));
/* Delete packet, since the send failed */
wiced_packet_delete(tx_packet);
server->quit=WICED_TRUE;
return WICED_ERROR;
}
WPRINT_APP_INFO(("Echo data: %s\n", tx_data));
return WICED_SUCCESS;
}
void messageArrived( MessageData* md )
{
MQTTMessage* message = md->message;
WPRINT_APP_INFO ( ("Message Subscribed %d \r\n", message->payloadlen));WPRINT_APP_INFO ( ("Message dup %x \r\n", message->dup));WPRINT_APP_INFO ( ("Message id %x \r\n", message->id));WPRINT_APP_INFO ( ("Message qos %x \r\n", message->qos));WPRINT_APP_INFO ( ("Message retained %x \r\n", message->retained));
WPRINT_APP_INFO( ( "Topic Name ==> %.*s\t", md->topicName->lenstring.len, md->topicName->lenstring.data ) );WPRINT_APP_INFO( ( "Message ==> %.*s\n", (int)message->payloadlen, (char*)message->payload ) );
if ( strstr( (char*) message->payload, "ON" ) )
{
printf( "Turn ON LED\n" );
wiced_gpio_output_high( WICED_LED1 );
}
else
{
if ( strstr( (char*) message->payload, "OFF" ) )
{
printf( "Turn OFF LED\n" );
wiced_gpio_output_low( WICED_LED1 );
}
}
}
void application_start( )
{
float temp = 100;
float duty = 100;
float cnt = 0;
wiced_bool_t rise = WICED_FALSE;
/* Initialise the WICED device */
wiced_init();
// The RGB and setup button are initialized in platform.c
WPRINT_APP_INFO( ( "The RGB is breathing green.\n" ) );
while ( 1 )
{
wiced_pwm_init( RGB_G_PWM, 1000, duty );
wiced_pwm_start( RGB_G_PWM );
wiced_rtos_delay_milliseconds( 10 );
if(rise)
{
temp += cnt;
cnt -= 0.005;
if(temp >= 100.0)
{
duty = 100;
cnt = 0;
rise = WICED_FALSE;
}
else
{
duty = temp;
}
}
else
{
cnt += 0.005;
temp -= cnt;
if(temp <= 0.0)
{
duty = 0;
rise = WICED_TRUE;
}
else
{
duty = temp;
}
}
}
}
static void publish_callback( void* arg )
{
if ( button_pressed == 0 )
{
smart_control = button_pressed = 1;
}
else
{
smart_control = button_pressed = 0;
}
WPRINT_APP_INFO (( "button_pressed %d\n", button_pressed ));
}
void application_start( )
{
/* Initialise the WICED device */
wiced_init();
while ( 1 )
{
WPRINT_APP_INFO( ( "Analog input voltage measurement:\n" ) );
for(uint8_t i=0; i<8; i++)
{
wiced_adc_init( analog_channel[i], 480 );
// This function only takes sample for the channel that selected by the last time invoking wiced_adc_init().
// So if you change to take sample for another channel, you need to invoke wiced_adc_init() to select this channel first.
wiced_adc_take_sample( analog_channel[i], &analog_value[i] );
WPRINT_APP_INFO( ( "Channel %d input voltage: %d\n", i, analog_value[i] ) );
}
wiced_rtos_delay_milliseconds( 3000 );
WPRINT_APP_INFO( ( "\n\n" ) );
}
}
wiced_result_t wiced_wlu_server_eth_start( int tcp_server_port , char** argv)
{
wiced_result_t result;
UNUSED_PARAMETER(argv);
wiced_assert("wlu_server already started", (wlu_server.started == WICED_FALSE));
wlu_server.started = WICED_TRUE;
wlu_server.eth_started = WICED_TRUE;
wlu_server.eth_port = tcp_server_port;
// WWD_WLAN_KEEP_AWAKE( );
/* Bring up the network interface */
result = wiced_network_up( WICED_ETHERNET_INTERFACE, WICED_USE_EXTERNAL_DHCP_SERVER, NULL );
if ( result != WICED_SUCCESS )
{
WPRINT_APP_INFO(("Failed to connect to Ethernet.\n"));
}
/* Create a TCP socket */
if ( wiced_tcp_create_socket( &tcp_client_socket, WICED_ETHERNET_INTERFACE ) != WICED_SUCCESS )
{
WPRINT_APP_INFO( ("TCP socket creation failed\n") );
}
if (wiced_tcp_listen( &tcp_client_socket, tcp_server_port ) != WICED_SUCCESS)
{
WPRINT_APP_INFO(("TCP server socket initialization failed\n"));
wiced_tcp_delete_socket(&tcp_client_socket);
return WICED_ERROR;
}
wiced_rtos_create_thread( &wlu_server.thread, WLU_SERVER_THREAD_PRIORITY, "wlu_eth_server", wlu_server_thread, WLU_SERVER_STACK_SIZE, &wlu_server );
return WICED_SUCCESS;
}
/*
* Call back function to handle connection events.
*/
static wiced_result_t wiced_amqp_connection_event_cb( wiced_amqp_event_t event, void *args, wiced_amqp_connection_t *conn )
{
switch( event )
{
case AMQP_EVENT_CONNECTION_RECV_OPEN_OK:
case AMQP_EVENT_CONNECTION_RECV_CLOSE_OK:
{
expected_event = event;
wiced_rtos_set_semaphore( &semaphore );
}
break;
case AMQP_EVENT_CONNECTION_ERROR:
{
WPRINT_APP_INFO(("[AMQP] ERROR LOST CONNECTION\n\n"));
}
break;
case AMQP_EVENT_PROTOCOL_RECV_HEADER:
{
WPRINT_APP_INFO(("[AMQP] ERROR RECEIVED PROTOCOL HEADER.\n"));
WPRINT_APP_INFO(("[AMQP] Broker should support AMQP0.9-1.\n\n"));
}
break;
case AMQP_EVENT_CONNECTION_RECV_CLOSE:
{
wiced_amqp_connection_close_arg_t *close_args = ( wiced_amqp_connection_close_arg_t* )args;
/* Data is sent as short string */
memcpy( str, close_args->reply_text.str, close_args->reply_text.len );
str[ close_args->reply_text.len ] = '\0';
WPRINT_APP_INFO(("[AMQP] ERROR RECEIVED BROKER CLOSE REQUEST.\n"));
WPRINT_APP_INFO(("[AMQP] REPLY TEXT: %s.\n\n",str));
}
break;
default:
break;
}
return WICED_SUCCESS;
}
static wiced_result_t device_init()
{
smart_home_app_dct_t* dct_app;
wiced_result_t res;
if( wiced_dct_read_lock( (void**) &dct_app, WICED_TRUE, DCT_APP_SECTION, 0, sizeof( *dct_app ) ) != WICED_SUCCESS)
{
return WICED_ERROR;
}
this_dev.configured = dct_app->device_configured;
this_dev.dev_type = dct_app->dev_type;
this_dev.dev_index = dct_app->dev_index;
strncpy(this_dev.dev_name, dct_app->dev_name, sizeof(this_dev.dev_name));
WPRINT_APP_INFO(("this_dev.dev_name is %s\n", this_dev.dev_name));
wiced_dct_read_unlock( dct_app, WICED_TRUE );
if(this_dev.configured == WICED_FALSE) {
return WICED_ERROR;
}
if(this_dev.dev_type == DEV_TYPE_MASTER) {
this_dev.parse_socket_msg_fun = master_parse_socket_msg;
uart_receive_enable(master_process_uart_msg);
user_receive_enable();
}else if(this_dev.dev_type == DEV_TYPE_LIGHT || this_dev.dev_type == DEV_TYPE_CURTAIN) {
if(this_dev.dev_type == DEV_TYPE_LIGHT) {
res = light_dev_init(&this_dev.specific.light_dev, WICED_HARDWARE_IO_WORKER_THREAD, report_light_status);
if(res != WICED_SUCCESS) {
return WICED_ERROR;
}
this_dev.parse_socket_msg_fun = light_parse_socket_msg;
//this_dev.device_keypad_handler = light_keypad_handler;
uart_keypad_enable( &device_keypad, WICED_HARDWARE_IO_WORKER_THREAD, light_keypad_handler, 3000);
} else if(this_dev.dev_type == DEV_TYPE_CURTAIN) {
res = curtain_init(&this_dev.specific.curtain, WICED_HARDWARE_IO_WORKER_THREAD, report_curtain_pos);
if( res != WICED_SUCCESS) {
return WICED_ERROR;
}
this_dev.parse_socket_msg_fun = curtain_parse_socket_msg;
//this_dev.device_keypad_handler = curtain_keypad_handler;
uart_keypad_enable( &device_keypad, WICED_HARDWARE_IO_WORKER_THREAD, curtain_keypad_handler, 3000);
}
pre_receive_enable();
}
next_receive_enable();
return WICED_SUCCESS;
}
void application_start( )
{
wiced_result_t result;
wiced_init( );
platform_init_audio( );
WPRINT_APP_INFO ( ("Starting Bluetooth...\n") );
/* Initialize BT stack and profiles */
result = wiced_bt_init( &app_callbacks.device_manager_callbacks, &audio_preferences );
if ( result != WICED_SUCCESS )
{
WPRINT_APP_ERROR( ( "Failed to initialize Bluetooth\n" ) );
}
}