C++ (Cpp) XTESTS_START_RUNNER_WITH_SETUP_FNS Beispiele

Beispiel #1

Datei: test.component.platformstl.filesystem.memory_mapped_file.cpp Projekt: synesissoftware/STLSoft-1.10-delta

int main(int argc, char **argv)
{
    int retCode = EXIT_SUCCESS;
    int verbosity = 2;

    argv0 = argv[0];

    XTESTS_COMMANDLINE_PARSEVERBOSITY(argc, argv, &verbosity);

    if(XTESTS_START_RUNNER_WITH_SETUP_FNS("test.component.platformstl.filesystem.memory_mapped_file", verbosity, NULL, NULL, NULL))
    {

        XTESTS_RUN_CASE(test_construct_1);
        XTESTS_RUN_CASE(test_construct_2);
        XTESTS_RUN_CASE(test_equal);
        XTESTS_RUN_CASE(test_swap_1);
        XTESTS_RUN_CASE(test_swap_2);
        XTESTS_RUN_CASE(test_swap_3);
        XTESTS_RUN_CASE(test_1_6);
        XTESTS_RUN_CASE(test_1_7);
        XTESTS_RUN_CASE(test_1_8);
        XTESTS_RUN_CASE(test_1_9);
        XTESTS_RUN_CASE(test_1_10);
        XTESTS_RUN_CASE(test_1_11);
        XTESTS_RUN_CASE(test_1_12);
        XTESTS_RUN_CASE(test_1_13);
        XTESTS_RUN_CASE(test_1_14);
        XTESTS_RUN_CASE(test_1_15);
        XTESTS_RUN_CASE(test_1_16);
        XTESTS_RUN_CASE(test_1_17);
        XTESTS_RUN_CASE(test_1_18);
        XTESTS_RUN_CASE(test_1_19);

#ifdef STLSOFT_USE_XCOVER
        XCOVER_REPORT_FILE_COVERAGE("*platformstl/*/file_lines.hpp", NULL);
#endif /* STLSOFT_USE_XCOVER */

        XTESTS_PRINT_RESULTS();

        XTESTS_END_RUNNER_UPDATE_EXITCODE(&retCode);
    }

    return retCode;
}

Beispiel #2

Datei: test.component.core.getProcessIdentity.c Projekt: synesissoftware/Pantheios

int main(int argc, char **argv)
{
    int retCode = EXIT_SUCCESS;
    int verbosity = 2;

    XTESTS_COMMANDLINE_PARSEVERBOSITY(argc, argv, &verbosity);

    if(XTESTS_START_RUNNER_WITH_SETUP_FNS("test.component.core.getProcessIdentity", verbosity, setup, teardown, param))
    {
        XTESTS_RUN_CASE(test_1_0);
        XTESTS_RUN_CASE(test_1_1);
        XTESTS_RUN_CASE(test_1_2);
        XTESTS_RUN_CASE(test_1_3);
        XTESTS_RUN_CASE(test_1_4);
        XTESTS_RUN_CASE(test_1_5);
        XTESTS_RUN_CASE(test_1_6);
        XTESTS_RUN_CASE(test_1_7);
        XTESTS_RUN_CASE(test_1_8);
        XTESTS_RUN_CASE(test_1_9);
        XTESTS_RUN_CASE(test_1_10);
        XTESTS_RUN_CASE(test_1_11);
        XTESTS_RUN_CASE(test_1_12);
        XTESTS_RUN_CASE(test_1_13);
        XTESTS_RUN_CASE(test_1_14);
        XTESTS_RUN_CASE(test_1_15);
        XTESTS_RUN_CASE(test_1_16);
        XTESTS_RUN_CASE(test_1_17);
        XTESTS_RUN_CASE(test_1_18);
        XTESTS_RUN_CASE(test_1_19);

        XTESTS_PRINT_RESULTS();

        XTESTS_END_RUNNER_UPDATE_EXITCODE(&retCode);
    }

    return retCode;
}

Beispiel #3

Datei: test.unit.winstl.diagnostics.output_debug_line.C.c Projekt: synesissoftware/STLSoft-1.10-delta

int main(int argc, char **argv)
{
	int retCode = EXIT_SUCCESS;
	int verbosity = 2;

	XTESTS_COMMANDLINE_PARSEVERBOSITY(argc, argv, &verbosity);

	if(XTESTS_START_RUNNER_WITH_SETUP_FNS("test.unit.winstl.diagnostics.output_debug_line.C", verbosity, setup, teardown, setupParam))
	{
		XTESTS_RUN_CASE(test_1_0);
		XTESTS_RUN_CASE(test_1_1);
		XTESTS_RUN_CASE(test_1_2);
		XTESTS_RUN_CASE(test_1_3);
		XTESTS_RUN_CASE(test_1_4);
		XTESTS_RUN_CASE(test_1_5);
		XTESTS_RUN_CASE(test_1_6);
		XTESTS_RUN_CASE(test_1_7);
		XTESTS_RUN_CASE(test_1_8);
		XTESTS_RUN_CASE(test_1_9);
		XTESTS_RUN_CASE(test_1_10);
		XTESTS_RUN_CASE(test_1_11);
		XTESTS_RUN_CASE(test_1_12);
		XTESTS_RUN_CASE(test_1_13);
		XTESTS_RUN_CASE(test_1_14);
		XTESTS_RUN_CASE(test_1_15);
		XTESTS_RUN_CASE(test_1_16);
		XTESTS_RUN_CASE(test_1_17);
		XTESTS_RUN_CASE(test_1_18);
		XTESTS_RUN_CASE(test_1_19);

		XTESTS_PRINT_RESULTS();

		XTESTS_END_RUNNER_UPDATE_EXITCODE(&retCode);
	}

	return retCode;
}

Beispiel #4

Datei: test.unit.sink.OutputDebugString.cpp Projekt: JerYme/fastformat

int main(int argc, char **argv)
{
    int retCode = EXIT_SUCCESS;
    int verbosity = 2;

    XTESTS_COMMANDLINE_PARSEVERBOSITY(argc, argv, &verbosity);

    if(XTESTS_START_RUNNER_WITH_SETUP_FNS("test.unit.sink.OutputDebugString", verbosity, OutputDebugString_setup, NULL, NULL))
    {
        XTESTS_RUN_CASE(test_1_0);
        XTESTS_RUN_CASE(test_1_1);
        XTESTS_RUN_CASE(test_1_2);
        XTESTS_RUN_CASE(test_1_3);
        XTESTS_RUN_CASE(test_1_4);
        XTESTS_RUN_CASE(test_1_5);
        XTESTS_RUN_CASE(test_1_6);
        XTESTS_RUN_CASE(test_1_7);
        XTESTS_RUN_CASE(test_1_8);
        XTESTS_RUN_CASE(test_1_9);
        XTESTS_RUN_CASE(test_1_10);
        XTESTS_RUN_CASE(test_1_11);
        XTESTS_RUN_CASE(test_1_12);
        XTESTS_RUN_CASE(test_1_13);
        XTESTS_RUN_CASE(test_1_14);
        XTESTS_RUN_CASE(test_1_15);
        XTESTS_RUN_CASE(test_1_16);
        XTESTS_RUN_CASE(test_1_17);
        XTESTS_RUN_CASE(test_1_18);
        XTESTS_RUN_CASE(test_1_19);

        XTESTS_PRINT_RESULTS();

        XTESTS_END_RUNNER_UPDATE_EXITCODE(&retCode);
    }

    return retCode;
}