C++ (Cpp) __HAL_RCC_ADC1_CLK_DISABLE Beispiele

Beispiel #1

Datei: adc.c Projekt: theapi/solar

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC GPIO Configuration    
    PA3     ------> ADC_IN3
    PA4     ------> ADC_IN4
    PA6     ------> ADC_IN6
    PA7     ------> ADC_IN7
    PB0     ------> ADC_IN8
    PB1     ------> ADC_IN9 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_6|GPIO_PIN_7);

    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0|GPIO_PIN_1);

  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
  }
} 

Beispiel #2

Datei: stm32f4xx_hal_msp.c Projekt: hocarm/STM32F4-Discovery-Tutorial

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{

  if(hadc->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PA0-WKUP     ------> ADC1_IN0
    PA1     ------> ADC1_IN1
    PA2     ------> ADC1_IN2 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2);

    /* Peripheral DMA DeInit*/
    HAL_DMA_DeInit(hadc->DMA_Handle);

    /* Peripheral interrupt DeInit*/
    HAL_NVIC_DisableIRQ(ADC_IRQn);

  }
  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */

}

Beispiel #3

Datei: stm32f4xx_hal_msp.c Projekt: librespacefoundation/upsat-obc-software

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{

  if(hadc->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PB0     ------> ADC1_IN8 
    */
    HAL_GPIO_DeInit(IAC_CM_ADC1_8_GPIO_Port, IAC_CM_ADC1_8_Pin);

    /* Peripheral interrupt DeInit*/
    HAL_NVIC_DisableIRQ(ADC_IRQn);

  }
  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */

}

Beispiel #4

Datei: adc.c Projekt: StefanJia/test2

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PC0     ------> ADC1_IN10
    PC1     ------> ADC1_IN11
    PC2     ------> ADC1_IN12
    PC3     ------> ADC1_IN13
    PC4     ------> ADC1_IN14 
    */
    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
                          |GPIO_PIN_4);

  }
  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
} 

Beispiel #5

Datei: adc-board.c Projekt: CommunicationSolutions/LoRaMac-node

uint16_t AdcMcuRead( Adc_t *obj, uint8_t channel )
{
    ADC_HandleTypeDef *hadc;
    ADC_ChannelConfTypeDef adcConf;
    uint16_t adcData = 0;

    hadc = &obj->Adc;

    /* Enable HSI */
    __HAL_RCC_HSI_ENABLE();

    /* Wait till HSI is ready */
    while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
    {
    }

    __HAL_RCC_ADC1_CLK_ENABLE( );

    adcConf.Channel = channel;
    adcConf.Rank = ADC_REGULAR_RANK_1;
    adcConf.SamplingTime = ADC_SAMPLETIME_192CYCLES;

    HAL_ADC_ConfigChannel( hadc, &adcConf);

    /* Enable ADC1 */
    __HAL_ADC_ENABLE( hadc) ;

    /* Start ADC1 Software Conversion */
    HAL_ADC_Start( hadc);

    HAL_ADC_PollForConversion( hadc, HAL_MAX_DELAY );

    adcData = HAL_ADC_GetValue ( hadc);

    __HAL_ADC_DISABLE( hadc) ;

    if( ( adcConf.Channel == ADC_CHANNEL_TEMPSENSOR ) || ( adcConf.Channel == ADC_CHANNEL_VREFINT ) )
    {
        HAL_ADC_DeInit( hadc );
    }
    __HAL_RCC_ADC1_CLK_DISABLE( );

    /* Disable HSI */
    __HAL_RCC_HSI_DISABLE();

    return adcData;
}

Beispiel #6

Datei: adc_stm32f4.c Projekt: vrahane/incubator-mynewt-core

static void
stm32f4_adc_clk_disable(ADC_HandleTypeDef *hadc)
{
    uintptr_t adc_addr = (uintptr_t)hadc->Instance;

    switch (adc_addr) {
        case (uintptr_t)ADC1:
            __HAL_RCC_ADC1_CLK_DISABLE();
            break;
        case (uintptr_t)ADC2:
            __HAL_RCC_ADC2_CLK_DISABLE();
            break;
        case (uintptr_t)ADC3:
            __HAL_RCC_ADC3_CLK_DISABLE();
            break;
        default:
            assert(0);
    }
}

Beispiel #7

Datei: adc.c Projekt: sheepdoll/HALMX_Arduino_STM32

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PA0-WKUP     ------> ADC1_IN0 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0);

  }
  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
} 

Beispiel #8

Datei: adc.c Projekt: fpgamcu/watch-firmware

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC GPIO Configuration    
    PA6     ------> ADC_IN6 
    */
    HAL_GPIO_DeInit(POWER_ADC6_GPIO_Port, POWER_ADC6_Pin);

  }
  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
} 

Beispiel #9

Datei: stm32f0xx_hal_msp.c Projekt: ma-renaud/Soldering_Iron_Firmware

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{

  if(hadc->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC GPIO Configuration    
    PA4     ------> ADC_IN4 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4);

  }
  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */

}

Beispiel #10

Datei: stm32f4xx_hal_msp.c Projekt: librespacefoundation/upsat-comms-software

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{

  if(hadc->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();

    /* Peripheral DMA DeInit*/
    HAL_DMA_DeInit(hadc->DMA_Handle);

    /* Peripheral interrupt DeInit*/
    HAL_NVIC_DisableIRQ(ADC_IRQn);

  }
  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */

}

Beispiel #11

Datei: adc.c Projekt: gears-/BMS_CELL

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();

    /* ADC1 interrupt Deinit */
    HAL_NVIC_DisableIRQ(ADC1_COMP_IRQn);
   /**ADC GPIO Configuration
    PA1     ------> ADC_IN1
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1);

  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
  }
} 

Beispiel #12

Datei: drv_adc.c Projekt: ROBOTIS-GIT/OpenCM

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
  uint8_t i;


  if( hadc->Instance == ADC1 )
  {
    __HAL_RCC_ADC1_FORCE_RESET();
    __HAL_RCC_ADC1_RELEASE_RESET();
    __HAL_RCC_ADC1_CLK_DISABLE();
  }


  i = 0;
  while(1)
  {
    if( g_Pin2PortMapArray[i].GPIOx_Port == NULL ) break;

    HAL_GPIO_DeInit(g_Pin2PortMapArray[i].GPIOx_Port, g_Pin2PortMapArray[i].Pin_abstraction);

    i++;
  }
}

Beispiel #13

Datei: adc_V3_4.c Projekt: madcowswe/ODrive

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PC0     ------> ADC1_IN10
    PC1     ------> ADC1_IN11
    PC2     ------> ADC1_IN12
    PC3     ------> ADC1_IN13
    PA4     ------> ADC1_IN4
    PA5     ------> ADC1_IN5
    PA6     ------> ADC1_IN6
    PC4     ------> ADC1_IN14
    PC5     ------> ADC1_IN15 
    */
    HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin 
                          |AUX_TEMP_Pin|M0_TEMP_Pin);

    HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin);

    /* ADC1 interrupt Deinit */
  /* USER CODE BEGIN ADC1:ADC_IRQn disable */
    /**
    * Uncomment the line below to disable the "ADC_IRQn" interrupt
    * Be aware, disabling shared interrupt may affect other IPs
    */
    /* HAL_NVIC_DisableIRQ(ADC_IRQn); */
  /* USER CODE END ADC1:ADC_IRQn disable */

  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC2)
  {
  /* USER CODE BEGIN ADC2_MspDeInit 0 */

  /* USER CODE END ADC2_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC2_CLK_DISABLE();
  
    /**ADC2 GPIO Configuration    
    PC0     ------> ADC2_IN10
    PC1     ------> ADC2_IN11
    PC2     ------> ADC2_IN12
    PC3     ------> ADC2_IN13
    PA4     ------> ADC2_IN4
    PA5     ------> ADC2_IN5
    PA6     ------> ADC2_IN6
    PC4     ------> ADC2_IN14
    PC5     ------> ADC2_IN15 
    */
    HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin 
                          |AUX_TEMP_Pin|M0_TEMP_Pin);

    HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin);

    /* ADC2 interrupt Deinit */
  /* USER CODE BEGIN ADC2:ADC_IRQn disable */
    /**
    * Uncomment the line below to disable the "ADC_IRQn" interrupt
    * Be aware, disabling shared interrupt may affect other IPs
    */
    /* HAL_NVIC_DisableIRQ(ADC_IRQn); */
  /* USER CODE END ADC2:ADC_IRQn disable */

  /* USER CODE BEGIN ADC2_MspDeInit 1 */

  /* USER CODE END ADC2_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC3)
  {
  /* USER CODE BEGIN ADC3_MspDeInit 0 */

  /* USER CODE END ADC3_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC3_CLK_DISABLE();
  
    /**ADC3 GPIO Configuration    
    PC0     ------> ADC3_IN10
    PC1     ------> ADC3_IN11
    PC2     ------> ADC3_IN12
    PC3     ------> ADC3_IN13 
    */
    HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin);

    /* ADC3 interrupt Deinit */
  /* USER CODE BEGIN ADC3:ADC_IRQn disable */
    /**
    * Uncomment the line below to disable the "ADC_IRQn" interrupt
    * Be aware, disabling shared interrupt may affect other IPs
    */
    /* HAL_NVIC_DisableIRQ(ADC_IRQn); */
  /* USER CODE END ADC3:ADC_IRQn disable */

  /* USER CODE BEGIN ADC3_MspDeInit 1 */

  /* USER CODE END ADC3_MspDeInit 1 */
  }
} 

Beispiel #14

Datei: analog.c Projekt: amassou2017/Arduino_Core_STM32

/**
  * @brief  DeInitializes the ADC MSP.
  * @param  hadc: ADC handle
  * @retval None
  */
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
#ifdef __HAL_RCC_ADC_FORCE_RESET
  __HAL_RCC_ADC_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC_RELEASE_RESET
  __HAL_RCC_ADC_RELEASE_RESET();
#endif

  if(hadc->Instance == ADC1) {
#ifdef __HAL_RCC_ADC1_FORCE_RESET
	__HAL_RCC_ADC1_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC1_RELEASE_RESET
    __HAL_RCC_ADC1_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_FORCE_RESET
	__HAL_RCC_ADC12_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_RELEASE_RESET
    __HAL_RCC_ADC12_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC1_CLK_DISABLE
	__HAL_RCC_ADC1_CLK_DISABLE();
#endif
#ifdef __HAL_RCC_ADC12_CLK_DISABLE
	__HAL_RCC_ADC12_CLK_DISABLE();
#endif
  }
#ifdef ADC2
  else if(hadc->Instance == ADC2) {
#ifdef __HAL_RCC_ADC2_FORCE_RESET
	__HAL_RCC_ADC2_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC2_RELEASE_RESET
    __HAL_RCC_ADC2_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_FORCE_RESET
	__HAL_RCC_ADC12_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_RELEASE_RESET
    __HAL_RCC_ADC12_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC2_CLK_DISABLE
	__HAL_RCC_ADC2_CLK_DISABLE();
#endif
#ifdef __HAL_RCC_ADC2_CLK_DISABLE
	__HAL_RCC_ADC2_CLK_DISABLE();
#endif
  }
#endif
#ifdef ADC3
  else if(hadc->Instance == ADC3) {
#ifdef __HAL_RCC_ADC3_FORCE_RESET
	__HAL_RCC_ADC3_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC3_RELEASE_RESET
    __HAL_RCC_ADC3_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC34_FORCE_RESET
	__HAL_RCC_ADC34_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC34_RELEASE_RESET
    __HAL_RCC_ADC34_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC3_CLK_DISABLE
    __HAL_RCC_ADC3_CLK_DISABLE();
#endif
#ifdef __HAL_RCC_ADC34_CLK_DISABLE
    __HAL_RCC_ADC34_CLK_DISABLE();
#endif
  }
#endif
#ifdef ADC4
  else if(hadc->Instance == ADC4) {
	__HAL_RCC_ADC34_FORCE_RESET();
    __HAL_RCC_ADC34_RELEASE_RESET();
    __HAL_RCC_ADC34_CLK_DISABLE();
  }
#endif
#ifdef __HAL_RCC_ADC_CLK_DISABLE
  __HAL_RCC_ADC_CLK_DISABLE();
#endif
}

Beispiel #15

Datei: adc.c Projekt: dzavalishin/smart-home-devices

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PA6     ------> ADC1_IN6
    PB1     ------> ADC1_IN9 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6);

    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1);

  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC2)
  {
  /* USER CODE BEGIN ADC2_MspDeInit 0 */

  /* USER CODE END ADC2_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC2_CLK_DISABLE();
  
    /**ADC2 GPIO Configuration    
    PA5     ------> ADC2_IN5
    PB0     ------> ADC2_IN8 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);

    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0);

  /* USER CODE BEGIN ADC2_MspDeInit 1 */

  /* USER CODE END ADC2_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC3)
  {
  /* USER CODE BEGIN ADC3_MspDeInit 0 */

  /* USER CODE END ADC3_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC3_CLK_DISABLE();
  
    /**ADC3 GPIO Configuration    
    PC0     ------> ADC3_IN10
    PC2     ------> ADC3_IN12
    PC3     ------> ADC3_IN13
    PA0-WKUP     ------> ADC3_IN0 
    */
    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3);

    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0);

  /* USER CODE BEGIN ADC3_MspDeInit 1 */

  /* USER CODE END ADC3_MspDeInit 1 */
  }
}