/**
* @brief Return SYSTEM clock frequency
* @retval SYSTEM clock frequency (in Hz)
*/
uint32_t RCC_GetSystemClockFreq(void)
{
uint32_t frequency = 0U;
/* Get SYSCLK source -------------------------------------------------------*/
switch (LL_RCC_GetSysClkSource())
{
case LL_RCC_SYS_CLKSOURCE_STATUS_MSI: /* MSI used as system clock source */
frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange());
break;
case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
frequency = HSI_VALUE;
break;
case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
frequency = HSE_VALUE;
break;
case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */
frequency = RCC_PLL_GetFreqDomain_SYS();
break;
default:
frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange());
break;
}
return frequency;
}
/**
* @brief Return PLLSAI2 clock frequency used for ADC domain
* @retval PLLSAI2 clock frequency (in Hz)
*/
uint32_t RCC_PLLSAI2_GetFreqDomain_ADC(void)
{
uint32_t pllinputfreq = 0, pllsource = 0;
/* PLLSAI2_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLSAI2N
48M Domain clock = PLLSAI2_VCO / PLLSAI2R
*/
pllsource = LL_RCC_PLL_GetMainSource();
switch (pllsource)
{
case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLLSAI2 clock source */
pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
(LL_RCC_MSI_IsEnabledRangeSelect() ?
LL_RCC_MSI_GetRange() :
LL_RCC_MSI_GetRangeAfterStandby()));
break;
case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI2 clock source */
pllinputfreq = HSI_VALUE;
break;
case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI2 clock source */
pllinputfreq = HSE_VALUE;
break;
default:
pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
(LL_RCC_MSI_IsEnabledRangeSelect() ?
LL_RCC_MSI_GetRange() :
LL_RCC_MSI_GetRangeAfterStandby()));
break;
}
return __LL_RCC_CALC_PLLSAI2_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
LL_RCC_PLLSAI2_GetN(), LL_RCC_PLLSAI2_GetR());
}
/**
* @brief Return RNGx clock frequency
* @param RNGxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_RNG_CLKSOURCE
* @retval RNG clock frequency (in Hz)
* - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (MSI) or PLL is not ready
* - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected
*/
uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource)
{
uint32_t rng_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
/* Check parameter */
assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource));
/* RNGCLK clock frequency */
switch (LL_RCC_GetRNGClockSource(RNGxSource))
{
case LL_RCC_RNG_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as RNG clock source */
if (LL_RCC_PLLSAI1_IsReady())
{
rng_frequency = RCC_PLLSAI1_GetFreqDomain_48M();
}
break;
case LL_RCC_RNG_CLKSOURCE_PLL: /* PLL clock used as RNG clock source */
if (LL_RCC_PLL_IsReady())
{
rng_frequency = RCC_PLL_GetFreqDomain_48M();
}
break;
case LL_RCC_RNG_CLKSOURCE_MSI: /* MSI clock used as RNG clock source */
if (LL_RCC_MSI_IsReady())
{
rng_frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
(LL_RCC_MSI_IsEnabledRangeSelect() ?
LL_RCC_MSI_GetRange() :
LL_RCC_MSI_GetRangeAfterStandby()));
}
break;
case LL_RCC_RNG_CLKSOURCE_NONE: /* No clock used as RNG clock source */
default:
rng_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
break;
}
return rng_frequency;
}
