/**
* omap3_noncore_dpll_determine_rate - determine rate for a DPLL
* @hw: pointer to the clock to determine rate for
* @rate: target rate for the DPLL
* @best_parent_rate: pointer for returning best parent rate
* @best_parent_clk: pointer for returning best parent clock
*
* Determines which DPLL mode to use for reaching a desired target rate.
* Checks whether the DPLL shall be in bypass or locked mode, and if
* locked, calculates the M,N values for the DPLL via round-rate.
* Returns a positive clock rate with success, negative error value
* in failure.
*/
long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
unsigned long min_rate,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct dpll_data *dd;
if (!hw || !rate)
return -EINVAL;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
if (__clk_get_rate(dd->clk_bypass) == rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
*best_parent_clk = __clk_get_hw(dd->clk_bypass);
} else {
rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
*best_parent_clk = __clk_get_hw(dd->clk_ref);
}
*best_parent_rate = rate;
return rate;
}
/**
* omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
* The choice of modes depends on the DPLL's programmed rate: if it is
* the same as the DPLL's parent clock, it will enter bypass;
* otherwise, it will enter lock. This code will wait for the DPLL to
* indicate readiness before returning, unless the DPLL takes too long
* to enter the target state. Intended to be used as the struct clk's
* enable function. If DPLL3 was passed in, or the DPLL does not
* support low-power stop, or if the DPLL took too long to enter
* bypass or lock, return -EINVAL; otherwise, return 0.
*/
int omap3_noncore_dpll_enable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
int r;
struct dpll_data *dd;
struct clk_hw *parent;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
if (clk->clkdm) {
r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
if (r) {
WARN(1,
"%s: could not enable %s's clockdomain %s: %d\n",
__func__, clk_hw_get_name(hw),
clk->clkdm_name, r);
return r;
}
}
parent = clk_hw_get_parent(hw);
if (clk_hw_get_rate(hw) ==
clk_hw_get_rate(__clk_get_hw(dd->clk_bypass))) {
WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
r = _omap3_noncore_dpll_bypass(clk);
} else {
WARN_ON(parent != __clk_get_hw(dd->clk_ref));
r = _omap3_noncore_dpll_lock(clk);
}
return r;
}
/**
* omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
* @hw: pointer to the clock to determine rate for
* @req: target rate request
*
* Determines which DPLL mode to use for reaching a desired rate.
* Checks whether the DPLL shall be in bypass or locked mode, and if
* locked, calculates the M,N values for the DPLL via round-rate.
* Returns 0 on success and a negative error value otherwise.
*/
int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct dpll_data *dd;
if (!req->rate)
return -EINVAL;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
if (clk_get_rate(dd->clk_bypass) == req->rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
} else {
req->rate = omap4_dpll_regm4xen_round_rate(hw, req->rate,
&req->best_parent_rate);
req->best_parent_hw = __clk_get_hw(dd->clk_ref);
}
req->best_parent_rate = req->rate;
return 0;
}
/**
* omap3_noncore_dpll_set_rate - set rate for a DPLL clock
* @hw: pointer to the clock to set parent for
* @rate: target rate for the clock
* @parent_rate: rate of the parent clock
*
* Sets rate for a DPLL clock. First checks if the clock parent is
* reference clock (in bypass mode, the rate of the clock can't be
* changed) and proceeds with the rate change operation. Returns 0
* with success, negative error value otherwise.
*/
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct dpll_data *dd;
u16 freqsel = 0;
int ret;
if (!hw || !rate)
return -EINVAL;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
__clk_get_hw(dd->clk_ref))
return -EINVAL;
if (dd->last_rounded_rate == 0)
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
__clk_get_name(hw->clk), rate);
ret = omap3_noncore_dpll_program(clk, freqsel);
return ret;
}
/**
* _register_dpll - low level registration of a DPLL clock
* @hw: hardware clock definition for the clock
* @node: device node for the clock
*
* Finalizes DPLL registration process. In case a failure (clk-ref or
* clk-bypass is missing), the clock is added to retry list and
* the initialization is retried on later stage.
*/
static void __init _register_dpll(struct clk_hw *hw,
struct device_node *node)
{
struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
struct dpll_data *dd = clk_hw->dpll_data;
struct clk *clk;
clk = of_clk_get(node, 0);
if (IS_ERR(clk)) {
pr_debug("clk-ref missing for %s, retry later\n",
node->name);
if (!ti_clk_retry_init(node, hw, _register_dpll))
return;
goto cleanup;
}
dd->clk_ref = __clk_get_hw(clk);
clk = of_clk_get(node, 1);
if (IS_ERR(clk)) {
pr_debug("clk-bypass missing for %s, retry later\n",
node->name);
if (!ti_clk_retry_init(node, hw, _register_dpll))
return;
goto cleanup;
}
dd->clk_bypass = __clk_get_hw(clk);
/* register the clock */
clk = clk_register(NULL, &clk_hw->hw);
if (!IS_ERR(clk)) {
omap2_init_clk_hw_omap_clocks(&clk_hw->hw);
of_clk_add_provider(node, of_clk_src_simple_get, clk);
kfree(clk_hw->hw.init->parent_names);
kfree(clk_hw->hw.init);
return;
}
cleanup:
kfree(clk_hw->dpll_data);
kfree(clk_hw->hw.init->parent_names);
kfree(clk_hw->hw.init);
kfree(clk_hw);
}
/**
* omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
* from HSDivider PWRDN problem Implements Errata ID: i556.
* @clk: DPLL output struct clk
*
* 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
* dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
* valueafter their respective PWRDN bits are set. Any dummy write
* (Any other value different from the Read value) to the
* corresponding CM_CLKSEL register will refresh the dividers.
*/
int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
{
struct clk_divider *parent;
struct clk_hw *parent_hw;
u32 dummy_v, orig_v;
struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(clk);
parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
parent = to_clk_divider(parent_hw);
/* Restore the dividers */
if (!ret) {
orig_v = omap2_clk_readl(omap_clk, parent->reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
dummy_v ^= (1 << parent->shift);
omap2_clk_writel(dummy_v, omap_clk, parent->reg);
/* Write the original divider */
omap2_clk_writel(orig_v, omap_clk, parent->reg);
}
return ret;
}
static void __init of_ti_clockdomain_setup(struct device_node *node)
{
struct clk *clk;
struct clk_hw *clk_hw;
const char *clkdm_name = node->name;
int i;
int num_clks;
num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
for (i = 0; i < num_clks; i++) {
clk = of_clk_get(node, i);
if (IS_ERR(clk)) {
pr_err("%s: Failed get %s' clock nr %d (%ld)\n",
__func__, node->full_name, i, PTR_ERR(clk));
continue;
}
if (__clk_get_flags(clk) & CLK_IS_BASIC) {
pr_warn("can't setup clkdm for basic clk %s\n",
__clk_get_name(clk));
continue;
}
clk_hw = __clk_get_hw(clk);
to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
omap2_init_clk_clkdm(clk_hw);
}
}
/**
* omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
* from HSDivider PWRDN problem Implements Errata ID: i556.
* @clk: DPLL output struct clk
*
* 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
* dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
* valueafter their respective PWRDN bits are set. Any dummy write
* (Any other value different from the Read value) to the
* corresponding CM_CLKSEL register will refresh the dividers.
*/
static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
{
struct clk_divider *parent;
struct clk_hw *parent_hw;
u32 dummy_v, orig_v;
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(clk);
/* Parent is the x2 node, get parent of parent for the m2 div */
parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
parent = to_clk_divider(parent_hw);
/* Restore the dividers */
if (!ret) {
orig_v = ti_clk_ll_ops->clk_readl(parent->reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
dummy_v ^= (1 << parent->shift);
ti_clk_ll_ops->clk_writel(dummy_v, parent->reg);
/* Write the original divider */
ti_clk_ll_ops->clk_writel(orig_v, parent->reg);
}
return ret;
}
/**
* omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
* from HSDivider PWRDN problem Implements Errata ID: i556.
* @clk: DPLL output struct clk
*
* 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
* dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
* valueafter their respective PWRDN bits are set. Any dummy write
* (Any other value different from the Read value) to the
* corresponding CM_CLKSEL register will refresh the dividers.
*/
int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
{
struct clk_hw_omap *parent;
struct clk_hw *parent_hw;
u32 dummy_v, orig_v, clksel_shift;
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(clk);
parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
parent = to_clk_hw_omap(parent_hw);
/* Restore the dividers */
if (!ret) {
clksel_shift = __ffs(parent->clksel_mask);
orig_v = __raw_readl(parent->clksel_reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
dummy_v ^= (1 << clksel_shift);
__raw_writel(dummy_v, parent->clksel_reg);
/* Write the original divider */
__raw_writel(orig_v, parent->clksel_reg);
}
return ret;
}
/**
* omap2_clk_allow_idle - enable autoidle on an OMAP clock
* @clk: struct clk * to enable autoidle for
*
* Enable autoidle on an OMAP clock.
*/
int omap2_clk_allow_idle(struct clk *clk)
{
struct clk_hw_omap *c;
c = to_clk_hw_omap(__clk_get_hw(clk));
if (c->ops && c->ops->allow_idle)
c->ops->allow_idle(c);
return 0;
}
/**
* omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
* @clk: struct clk * to initialize
*
* Add an OMAP clock @clk to the internal list of OMAP clocks. Used
* temporarily for autoidle handling, until this support can be
* integrated into the common clock framework code in some way. No
* return value.
*/
void omap2_init_clk_hw_omap_clocks(struct clk *clk)
{
struct clk_hw_omap *c;
if (__clk_get_flags(clk) & CLK_IS_BASIC)
return;
c = to_clk_hw_omap(__clk_get_hw(clk));
list_add(&c->node, &clk_hw_omap_clocks);
}
void clk_unregister_fixed_factor(struct clk *clk)
{
struct clk_hw *hw;
hw = __clk_get_hw(clk);
if (!hw)
return;
clk_unregister(clk);
kfree(to_clk_fixed_factor(hw));
}
/**
* omap2_clk_allow_idle - enable autoidle on an OMAP clock
* @clk: struct clk * to enable autoidle for
*
* Enable autoidle on an OMAP clock.
*/
int omap2_clk_allow_idle(struct clk *clk)
{
struct clk_hw_omap *c;
if (__clk_get_flags(clk) & CLK_IS_BASIC)
return -EINVAL;
c = to_clk_hw_omap(__clk_get_hw(clk));
if (c->ops && c->ops->allow_idle)
c->ops->allow_idle(c);
return 0;
}
void clk_unregister_gate(struct clk *clk)
{
struct clk_gate *gate;
struct clk_hw *hw;
hw = __clk_get_hw(clk);
if (!hw)
return;
gate = to_clk_gate(hw);
clk_unregister(clk);
kfree(gate);
}
void clk_unregister_composite(struct clk *clk)
{
struct clk_composite *composite;
struct clk_hw *hw;
hw = __clk_get_hw(clk);
if (!hw)
return;
composite = to_clk_composite(hw);
clk_unregister(clk);
kfree(composite);
}
static struct clk *clk_gating_get_src(
struct of_phandle_args *clkspec, void *data)
{
int n;
if (clkspec->args_count < 1)
return ERR_PTR(-EINVAL);
for (n = 0; n < ctrl->num_gates; n++) {
struct clk_gate *gate =
to_clk_gate(__clk_get_hw(ctrl->gates[n]));
if (clkspec->args[0] == gate->bit_idx)
return ctrl->gates[n];
}
return ERR_PTR(-ENODEV);
}
static void kona_clk_teardown(struct clk *clk)
{
struct clk_hw *hw;
struct kona_clk *bcm_clk;
if (!clk)
return;
hw = __clk_get_hw(clk);
if (!hw) {
pr_err("%s: clk %p has null hw pointer\n", __func__, clk);
return;
}
clk_unregister(clk);
bcm_clk = to_kona_clk(hw);
bcm_clk_teardown(bcm_clk);
}
void tegra_periph_reset_assert(struct clk *c)
{
struct clk_hw *hw = __clk_get_hw(c);
struct tegra_clk_periph *periph = to_clk_periph(hw);
struct tegra_clk_periph_gate *gate;
if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) {
gate = to_clk_periph_gate(hw);
if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) {
WARN_ON(1);
return;
}
} else {
gate = &periph->gate;
}
tegra_periph_reset(gate, 1);
}
/**
* omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
* @clk: DPLL output struct clk
*
* Using parent clock DPLL data, look up DPLL state. If locked, set our
* rate to the dpll_clk * 2; otherwise, just use dpll_clk.
*/
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
const struct dpll_data *dd;
unsigned long rate;
u32 v;
struct clk_hw_omap *pclk = NULL;
struct clk *parent;
/* Walk up the parents of clk, looking for a DPLL */
do {
do {
parent = __clk_get_parent(hw->clk);
hw = __clk_get_hw(parent);
} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
if (!hw)
break;
pclk = to_clk_hw_omap(hw);
} while (pclk && !pclk->dpll_data);
/* clk does not have a DPLL as a parent? error in the clock data */
if (!pclk) {
WARN_ON(1);
return 0;
}
dd = pclk->dpll_data;
WARN_ON(!dd->enable_mask);
v = __raw_readl(dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
rate = parent_rate;
else
rate = parent_rate * 2;
return rate;
}
/* Find the parent DPLL for the given clkoutx2 clock */
static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
{
struct clk_hw_omap *pclk = NULL;
struct clk *parent;
/* Walk up the parents of clk, looking for a DPLL */
do {
do {
parent = __clk_get_parent(hw->clk);
hw = __clk_get_hw(parent);
} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
if (!hw)
break;
pclk = to_clk_hw_omap(hw);
} while (pclk && !pclk->dpll_data);
/* clk does not have a DPLL as a parent? error in the clock data */
if (!pclk) {
WARN_ON(1);
return NULL;
}
return pclk;
}
static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
unsigned long min_rate,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_p)
{
struct clk_composite *composite = to_clk_composite(hw);
const struct clk_ops *rate_ops = composite->rate_ops;
const struct clk_ops *mux_ops = composite->mux_ops;
struct clk_hw *rate_hw = composite->rate_hw;
struct clk_hw *mux_hw = composite->mux_hw;
struct clk *parent;
unsigned long parent_rate;
long tmp_rate, best_rate = 0;
unsigned long rate_diff;
unsigned long best_rate_diff = ULONG_MAX;
int i;
if (rate_hw && rate_ops && rate_ops->determine_rate) {
__clk_hw_set_clk(rate_hw, hw);
return rate_ops->determine_rate(rate_hw, rate, min_rate,
max_rate,
best_parent_rate,
best_parent_p);
} else if (rate_hw && rate_ops && rate_ops->round_rate &&
mux_hw && mux_ops && mux_ops->set_parent) {
*best_parent_p = NULL;
if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
parent = clk_get_parent(mux_hw->clk);
*best_parent_p = __clk_get_hw(parent);
*best_parent_rate = __clk_get_rate(parent);
return rate_ops->round_rate(rate_hw, rate,
best_parent_rate);
}
for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
parent = clk_get_parent_by_index(mux_hw->clk, i);
if (!parent)
continue;
parent_rate = __clk_get_rate(parent);
tmp_rate = rate_ops->round_rate(rate_hw, rate,
&parent_rate);
if (tmp_rate < 0)
continue;
rate_diff = abs(rate - tmp_rate);
if (!rate_diff || !*best_parent_p
|| best_rate_diff > rate_diff) {
*best_parent_p = __clk_get_hw(parent);
*best_parent_rate = parent_rate;
best_rate_diff = rate_diff;
best_rate = tmp_rate;
}
if (!rate_diff)
return rate;
}
return best_rate;
} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
__clk_hw_set_clk(mux_hw, hw);
return mux_ops->determine_rate(mux_hw, rate, min_rate,
max_rate, best_parent_rate,
best_parent_p);
} else {
pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n");
return 0;
}
}
static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
struct device_node *np;
int i, count;
u32 freq;
struct clk *clk;
const struct clk_hw *hwclk;
struct cpufreq_frequency_table *table;
struct cpu_data *data;
unsigned int cpu = policy->cpu;
u64 u64temp;
np = of_get_cpu_node(cpu, NULL);
if (!np)
return -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
goto err_np;
policy->clk = of_clk_get(np, 0);
if (IS_ERR(policy->clk)) {
pr_err("%s: no clock information\n", __func__);
goto err_nomem2;
}
hwclk = __clk_get_hw(policy->clk);
count = clk_hw_get_num_parents(hwclk);
data->pclk = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
if (!data->pclk)
goto err_nomem2;
table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL);
if (!table)
goto err_pclk;
for (i = 0; i < count; i++) {
clk = clk_hw_get_parent_by_index(hwclk, i)->clk;
data->pclk[i] = clk;
freq = clk_get_rate(clk);
table[i].frequency = freq / 1000;
table[i].driver_data = i;
}
freq_table_redup(table, count);
freq_table_sort(table, count);
table[i].frequency = CPUFREQ_TABLE_END;
policy->freq_table = table;
data->table = table;
/* update ->cpus if we have cluster, no harm if not */
set_affected_cpus(policy);
policy->driver_data = data;
/* Minimum transition latency is 12 platform clocks */
u64temp = 12ULL * NSEC_PER_SEC;
do_div(u64temp, get_bus_freq());
policy->cpuinfo.transition_latency = u64temp + 1;
of_node_put(np);
return 0;
err_pclk:
kfree(data->pclk);
err_nomem2:
kfree(data);
err_np:
of_node_put(np);
return -ENODEV;
}
struct clk *ti_clk_register_dpll(struct ti_clk *setup)
{
struct clk_hw_omap *clk_hw;
struct clk_init_data init = { NULL };
struct dpll_data *dd;
struct clk *clk;
struct ti_clk_dpll *dpll;
const struct clk_ops *ops = &omap3_dpll_ck_ops;
struct clk *clk_ref;
struct clk *clk_bypass;
dpll = setup->data;
if (dpll->num_parents < 2)
return ERR_PTR(-EINVAL);
clk_ref = clk_get_sys(NULL, dpll->parents[0]);
clk_bypass = clk_get_sys(NULL, dpll->parents[1]);
if (IS_ERR_OR_NULL(clk_ref) || IS_ERR_OR_NULL(clk_bypass))
return ERR_PTR(-EAGAIN);
dd = kzalloc(sizeof(*dd), GFP_KERNEL);
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
if (!dd || !clk_hw) {
clk = ERR_PTR(-ENOMEM);
goto cleanup;
}
clk_hw->dpll_data = dd;
clk_hw->ops = &clkhwops_omap3_dpll;
clk_hw->hw.init = &init;
clk_hw->flags = MEMMAP_ADDRESSING;
init.name = setup->name;
init.ops = ops;
init.num_parents = dpll->num_parents;
init.parent_names = dpll->parents;
dd->control_reg = _get_reg(dpll->module, dpll->control_reg);
dd->idlest_reg = _get_reg(dpll->module, dpll->idlest_reg);
dd->mult_div1_reg = _get_reg(dpll->module, dpll->mult_div1_reg);
dd->autoidle_reg = _get_reg(dpll->module, dpll->autoidle_reg);
dd->modes = dpll->modes;
dd->div1_mask = dpll->div1_mask;
dd->idlest_mask = dpll->idlest_mask;
dd->mult_mask = dpll->mult_mask;
dd->autoidle_mask = dpll->autoidle_mask;
dd->enable_mask = dpll->enable_mask;
dd->sddiv_mask = dpll->sddiv_mask;
dd->dco_mask = dpll->dco_mask;
dd->max_divider = dpll->max_divider;
dd->min_divider = dpll->min_divider;
dd->max_multiplier = dpll->max_multiplier;
dd->auto_recal_bit = dpll->auto_recal_bit;
dd->recal_en_bit = dpll->recal_en_bit;
dd->recal_st_bit = dpll->recal_st_bit;
dd->clk_ref = __clk_get_hw(clk_ref);
dd->clk_bypass = __clk_get_hw(clk_bypass);
if (dpll->flags & CLKF_CORE)
ops = &omap3_dpll_core_ck_ops;
if (dpll->flags & CLKF_PER)
ops = &omap3_dpll_per_ck_ops;
if (dpll->flags & CLKF_J_TYPE)
dd->flags |= DPLL_J_TYPE;
clk = clk_register(NULL, &clk_hw->hw);
if (!IS_ERR(clk))
return clk;
cleanup:
kfree(dd);
kfree(clk_hw);
return clk;
}
static int of_dra7_atl_clk_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct dra7_atl_clock_info *cinfo;
int i;
int ret = 0;
if (!node)
return -ENODEV;
cinfo = devm_kzalloc(&pdev->dev, sizeof(*cinfo), GFP_KERNEL);
if (!cinfo)
return -ENOMEM;
cinfo->iobase = of_iomap(node, 0);
cinfo->dev = &pdev->dev;
pm_runtime_enable(cinfo->dev);
pm_runtime_irq_safe(cinfo->dev);
pm_runtime_get_sync(cinfo->dev);
atl_write(cinfo, DRA7_ATL_PCLKMUX_REG(0), DRA7_ATL_PCLKMUX);
for (i = 0; i < DRA7_ATL_INSTANCES; i++) {
struct device_node *cfg_node;
char prop[5];
struct dra7_atl_desc *cdesc;
struct of_phandle_args clkspec;
struct clk *clk;
int rc;
rc = of_parse_phandle_with_args(node, "ti,provided-clocks",
NULL, i, &clkspec);
if (rc) {
pr_err("%s: failed to lookup atl clock %d\n", __func__,
i);
return -EINVAL;
}
clk = of_clk_get_from_provider(&clkspec);
cdesc = to_atl_desc(__clk_get_hw(clk));
cdesc->cinfo = cinfo;
cdesc->id = i;
/* Get configuration for the ATL instances */
snprintf(prop, sizeof(prop), "atl%u", i);
cfg_node = of_find_node_by_name(node, prop);
if (cfg_node) {
ret = of_property_read_u32(cfg_node, "bws",
&cdesc->bws);
ret |= of_property_read_u32(cfg_node, "aws",
&cdesc->aws);
if (!ret) {
cdesc->valid = true;
atl_write(cinfo, DRA7_ATL_BWSMUX_REG(i),
cdesc->bws);
atl_write(cinfo, DRA7_ATL_AWSMUX_REG(i),
cdesc->aws);
}
}
cdesc->probed = true;
/*
* Enable the clock if it has been asked prior to loading the
* hw driver
*/
if (cdesc->enabled)
atl_clk_enable(__clk_get_hw(clk));
}
pm_runtime_put_sync(cinfo->dev);
return ret;
}
