STATIC
AGESA_STATUS
ReadSmbusByteData (
IN UINT16 Iobase,
IN UINT8 Address,
OUT UINT8 *ByteData,
IN UINTN Offset
)
{
UINTN Status;
UINT64 Limit;
Address |= 1; // set read bit
__outbyte (Iobase + 0, 0xFF); // clear error status
__outbyte (Iobase + 1, 0x1F); // clear error status
__outbyte (Iobase + 3, Offset); // offset in eeprom
__outbyte (Iobase + 4, Address); // slave address and read bit
__outbyte (Iobase + 2, 0x48); // read byte command
/* time limit to avoid hanging for unexpected error status (should never happen) */
Limit = __rdtsc () + 2000000000 / 10;
for (;;) {
Status = __inbyte (Iobase);
if (__rdtsc () > Limit) break;
if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((Status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
*ByteData = __inbyte (Iobase + 5);
if (Status == 2) Status = 0; // check for done with no errors
return Status;
}
STATIC
AGESA_STATUS
ReadSmbusByte (
IN UINT16 Iobase,
IN UINT8 Address,
OUT UINT8 *Buffer
)
{
UINTN Status;
UINT64 Limit;
__outbyte (Iobase + 0, 0xFF); // clear error status
__outbyte (Iobase + 1, 0x1F); // clear error status
__outbyte (Iobase + 2, 0x44); // read command
// time limit to avoid hanging for unexpected error status
Limit = __rdtsc () + 2000000000 / 10;
for (;;) {
Status = __inbyte (Iobase);
if (__rdtsc () > Limit) break;
if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((Status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
Buffer [0] = __inbyte (Iobase + 5);
if (Status == 2) Status = 0; // check for done with no errors
return Status;
}
VOID
NTAPI
HalpInitializeClock(VOID)
{
//PKPRCB Prcb = KeGetCurrentPrcb();
ULONG Increment;
USHORT RollOver;
ULONG Flags = 0;
/* Get increment and rollover for the largest time clock ms possible */
Increment = HalpRolloverTable[HalpLargestClockMS - 1].HighPart;
RollOver = (USHORT)HalpRolloverTable[HalpLargestClockMS - 1].LowPart;
/* Set the maximum and minimum increment with the kernel */
HalpCurrentTimeIncrement = Increment;
KeSetTimeIncrement(Increment, HalpRolloverTable[0].HighPart);
/* Disable interrupts */
Flags = __readmsr();
_disable();
/* Set the rollover */
__outbyte(TIMER_CONTROL_PORT, TIMER_SC0 | TIMER_BOTH | TIMER_MD2);
__outbyte(TIMER_DATA_PORT0, RollOver & 0xFF);
__outbyte(TIMER_DATA_PORT0, RollOver >> 8);
/* Restore interrupts if they were previously enabled */
__writemsr(Flags);
/* Save rollover and return */
HalpCurrentRollOver = RollOver;
}
static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
{
unsigned int status;
UINT64 limit;
address |= 1; // set read bit
__outbyte (iobase + 0, 0xFF); // clear error status
__outbyte (iobase + 1, 0x1F); // clear error status
__outbyte (iobase + 3, offset); // offset in eeprom
__outbyte (iobase + 4, address); // slave address and read bit
__outbyte (iobase + 2, 0x48); // read byte command
// time limit to avoid hanging for unexpected error status (should never happen)
limit = __rdtsc () + 2000000000 / 10;
for (;;)
{
status = __inbyte (iobase);
if (__rdtsc () > limit) break;
if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
buffer [0] = __inbyte (iobase + 5);
if (status == 2) status = 0; // check for done with no errors
return status;
}
STATIC
VOID
WritePmReg (
IN UINT8 Reg,
IN UINT8 Data
)
{
__outbyte (0xCD6, Reg);
__outbyte (0xCD7, Data);
}
STATIC
VOID
SetupFch (
IN UINT16
IN IoBase
)
{
AMD_CONFIG_PARAMS StdHeader;
UINT32 PciData32;
UINT8 PciData8;
PCI_ADDR PciAddress;
/* Set SMBUS MMIO. */
PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0x90);
PciData32 = (SMBUS_BASE_ADDR & 0xFFFFFFF0) | BIT0;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData32, &StdHeader);
/* Enable SMBUS MMIO. */
PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0xD2);
LibAmdPciRead(AccessWidth8, PciAddress, &PciData8, &StdHeader); ;
PciData8 |= BIT0;
LibAmdPciWrite(AccessWidth8, PciAddress, &PciData8, &StdHeader);
/* set SMBus clock to 400 KHz */
__outbyte (IoBase + 0x0E, 66000000 / 400000 / 4);
}
/*
Initialize the serial device hardware.
*/
VOID SerialPortInitialize(UINT16 Port, UINTN Baudrate)
{
// Map 5..8 to 0..3
UINT8 Data = (UINT8)(m_Data - (UINT8)5);
// Calculate divisor for baud generator
UINTN Divisor = BAUDRATE_MAX / Baudrate;
// Set communications format
UINT8 OutputData = (UINT8)((DLAB << 7) | (m_BreakSet << 6) | (m_Parity << 3) | (m_Stop << 2) | Data);
__outbyte((UINTN)(Port + LCR_OFFSET), OutputData);
// Configure baud rate
__outbyte((UINTN)(Port + BAUD_HIGH_OFFSET), (UINT8)(Divisor >> 8));
__outbyte((UINTN)(Port + BAUD_LOW_OFFSET), (UINT8)(Divisor & 0xff));
// Switch back to bank 0
OutputData = (UINT8)((~DLAB << 7) | (m_BreakSet << 6) | (m_Parity << 3) | (m_Stop << 2) | Data);
__outbyte((UINTN)(Port + LCR_OFFSET), OutputData);
}
/**
* Write a single smbus byte.
*/
UINT8 writeSmbusByte(UINT16 iobase, UINT8 address, UINT8 buffer,
int offset)
{
unsigned int status = -1;
UINT64 time_limit;
/* clear status register */
__outbyte(iobase + SMBUS_STATUS_REG, 0xFF);
__outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x1F);
/* set offset, set slave address, set data and start writing */
__outbyte(iobase + SMBUS_CONTROL_REG, offset);
__outbyte(iobase + SMBUS_HOST_CMD_REG, address & (~READ_BIT));
__outbyte(iobase + SMBUS_DATA0_REG, buffer);
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_WRITE_BYTE_COMMAND);
/* time limit to avoid hanging for unexpected error status */
time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
while (__rdtsc() <= time_limit) {
status = __inbyte(iobase + SMBUS_STATUS_REG);
if ((status & SMBUS_INTERRUPT_MASK) == 0)
continue; /* SMBusInterrupt not set, keep waiting */
if ((status & HOSTBUSY_MASK) != 0)
continue; /* HostBusy set, keep waiting */
break;
}
if (status != STATUS__COMPLETED_SUCCESSFULLY)
return AGESA_ERROR;
return AGESA_SUCCESS;
}
/*
Write data to serial device.
*/
VOID SerialPortWrite(UINT16 Port, UINT8 Data)
{
UINT8 Status = 0;
do
{
// Wait for the serail port to be ready
Status = __inbyte(Port + LSR_OFFSET);
} while ((Status & LSR_TXRDY) == 0);
__outbyte(Port, Data);
}
// Perform IO instruction according with parameters
_Use_decl_annotations_ static void VmmpIoWrapper(bool to_memory, bool is_string,
SIZE_T size_of_access,
unsigned short port,
void *address,
unsigned long count) {
NT_ASSERT(size_of_access == 1 || size_of_access == 2 || size_of_access == 4);
// Update CR3 with that of the guest since below code is going to access
// memory.
const auto guest_cr3 = UtilVmRead(VmcsField::kGuestCr3);
const auto vmm_cr3 = __readcr3();
__writecr3(guest_cr3);
// clang-format off
if (to_memory) {
if (is_string) {
// IN
switch (size_of_access) {
case 1: *reinterpret_cast<UCHAR*>(address) = __inbyte(port); break;
case 2: *reinterpret_cast<USHORT*>(address) = __inword(port); break;
case 4: *reinterpret_cast<ULONG*>(address) = __indword(port); break;
}
} else {
// INS
switch (size_of_access) {
case 1: __inbytestring(port, reinterpret_cast<UCHAR*>(address), count); break;
case 2: __inwordstring(port, reinterpret_cast<USHORT*>(address), count); break;
case 4: __indwordstring(port, reinterpret_cast<ULONG*>(address), count); break;
}
}
} else {
if (is_string) {
// OUT
switch (size_of_access) {
case 1: __outbyte(port, *reinterpret_cast<UCHAR*>(address)); break;
case 2: __outword(port, *reinterpret_cast<USHORT*>(address)); break;
case 4: __outdword(port, *reinterpret_cast<ULONG*>(address)); break;
}
} else {
// OUTS
switch (size_of_access) {
case 1: __outbytestring(port, reinterpret_cast<UCHAR*>(address), count); break;
case 2: __outwordstring(port, reinterpret_cast<USHORT*>(address), count); break;
case 4: __outdwordstring(port, reinterpret_cast<ULONG*>(address), count); break;
}
}
}
// clang-format on
__writecr3(vmm_cr3);
}
static int readSmbusByte (int iobase, int address, char *buffer)
{
unsigned int status;
UINT64 limit;
__outbyte (iobase + 0, 0xFF); // clear error status
__outbyte (iobase + 2, 0x44); // read command
// time limit to avoid hanging for unexpected error status
limit = __rdtsc () + 2000000000 / 10;
for (;;)
{
status = __inbyte (iobase);
if (__rdtsc () > limit) break;
if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
buffer [0] = __inbyte (iobase + 5);
if (status == 2) status = 0; // check for done with no errors
return status;
}
static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data)
{
__outbyte(SMB0_STATUS, 0x1E); // clear error status
__outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction = out
__outbyte(SMB0_HOSTCMD, command); // or destination offset
__outbyte(SMB0_DATA0, length); // sent before data
__inbyte(SMB0_CONTROL); // reset block data array
while (length--)
__outbyte(SMB0_BLOCKDATA, *(data++));
__outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ
while (__inbyte(SMB0_STATUS) == 0x01); // busy, no errors
return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors
}
static void setupFch(UINT16 ioBase)
{
AMD_CONFIG_PARAMS StdHeader;
UINT32 PciData32;
UINT8 PciData8;
PCI_ADDR PciAddress;
/* Set SMBus MMIO. */
PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0x90);
PciData32 = (ioBase & 0xFFFFFFF0) | BIT0;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData32, &StdHeader);
/* Enable SMBus MMIO. */
PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0xD2);
LibAmdPciRead(AccessWidth8, PciAddress, &PciData8, &StdHeader); ;
PciData8 |= BIT0;
LibAmdPciWrite(AccessWidth8, PciAddress, &PciData8, &StdHeader);
/* Set SMBus clock to 400 KHz */
__outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000);
}
/**
* Read a single SPD byte. If the first byte is being read, set up the
* address and offset. Following bytes auto increment.
*/
static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer,
int offset, int initial_offset)
{
unsigned int status = -1;
UINT64 time_limit;
/* clear status register */
__outbyte(iobase + SMBUS_STATUS_REG, 0xFF);
__outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x1F);
if (offset == initial_offset) {
/* Set offset, set slave address and start reading */
__outbyte(iobase + SMBUS_CONTROL_REG, offset);
__outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT);
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND);
} else {
/* Issue read command - auto increments to next byte */
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND);
}
/* time limit to avoid hanging for unexpected error status */
time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
while (__rdtsc() <= time_limit) {
status = __inbyte(iobase + SMBUS_STATUS_REG);
if ((status & SMBUS_INTERRUPT_MASK) == 0)
continue; /* SMBusInterrupt not set, keep waiting */
if ((status & HOSTBUSY_MASK) != 0)
continue; /* HostBusy set, keep waiting */
break;
}
if (status != STATUS__COMPLETED_SUCCESSFULLY)
return AGESA_ERROR;
buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG);
return AGESA_SUCCESS;
}
NTSTATUS __fastcall DispatchIOCTL(IN PIOCTL_INFO RequestInfo, OUT PULONG ResponseLength) {
NTSTATUS Status = STATUS_SUCCESS;
#define INPUT(Type) ((Type)(RequestInfo->InputBuffer))
#define OUTPUT(Type) ((Type)(RequestInfo->OutputBuffer))
#define SET_RESPONSE_LENGTH(Length) if (ResponseLength != NULL) {*ResponseLength = (Length);}
switch (RequestInfo->ControlCode) {
// DriverFunctions:
case GET_HANDLES_COUNT:
*OUTPUT(PULONG) = GetHandlesCount();
SET_RESPONSE_LENGTH(sizeof(ULONG));
break;
// NativeFunctions:
case START_BEEPER:
__outbyte(0x61, __inbyte(0x61) | 3);
break;
case STOP_BEEPER:
__outbyte(0x61, __inbyte(0x61) & 252);
break;
case SET_BEEPER_REGIME:
__outbyte(0x43, 0xB6);
break;
case SET_BEEPER_OUT:
__outbyte(0x61, __inbyte(0x61) | 2);
break;
case SET_BEEPER_IN:
__outbyte(0x61, __inbyte(0x61) & 253);
break;
case SET_BEEPER_DIVIDER:
SetBeeperDivider(*INPUT(PWORD));
break;
case SET_BEEPER_FREQUENCY:
SetBeeperFrequency(*INPUT(PWORD));
break;
case READ_IO_PORT_BYTE:
*OUTPUT(PBYTE) = __inbyte(*INPUT(PWORD));
SET_RESPONSE_LENGTH(sizeof(BYTE));
break;
case READ_IO_PORT_WORD:
*OUTPUT(PWORD) = __inword(*INPUT(PWORD));
SET_RESPONSE_LENGTH(sizeof(WORD));
break;
case READ_IO_PORT_DWORD:
*OUTPUT(PDWORD32) = __indword(*INPUT(PWORD));
SET_RESPONSE_LENGTH(sizeof(DWORD));
break;
case WRITE_IO_PORT_BYTE:
__outbyte(
INPUT(PWRITE_IO_PORT_BYTE_INPUT)->PortNumber,
INPUT(PWRITE_IO_PORT_BYTE_INPUT)->Data
);
break;
case WRITE_IO_PORT_WORD:
__outword(
INPUT(PWRITE_IO_PORT_WORD_INPUT)->PortNumber,
INPUT(PWRITE_IO_PORT_WORD_INPUT)->Data
);
break;
case WRITE_IO_PORT_DWORD:
__outdword(
INPUT(PWRITE_IO_PORT_DWORD_INPUT)->PortNumber,
INPUT(PWRITE_IO_PORT_DWORD_INPUT)->Data
);
break;
case RDPMC:
*OUTPUT(PULONGLONG) = __readpmc(*INPUT(PULONG));
SET_RESPONSE_LENGTH(sizeof(ULONGLONG));
break;
case RDMSR:
*OUTPUT(PULONGLONG) = __readmsr(*INPUT(PULONG));
SET_RESPONSE_LENGTH(sizeof(ULONGLONG));
break;
case WRMSR:
__writemsr(INPUT(PWRMSR_INPUT)->Index, INPUT(PWRMSR_INPUT)->Data);
break;
// MemoryUtils:
case ALLOC_KERNEL_MEMORY:
*OUTPUT(PUINT64) = (SIZE_T)GetMem(*INPUT(PSIZE_T));
SET_RESPONSE_LENGTH(sizeof(UINT64));
break;
case FREE_KERNEL_MEMORY:
FreeMem((PVOID)*INPUT(PUINT64));
break;
case COPY_MEMORY:
RtlCopyMemory(
(PVOID)INPUT(PCOPY_MEMORY_INPUT)->Destination,
(PVOID)INPUT(PCOPY_MEMORY_INPUT)->Source,
(SIZE_T)INPUT(PCOPY_MEMORY_INPUT)->Size
);
break;
case FILL_MEMORY:
RtlFillMemory(
(PVOID)INPUT(PFILL_MEMORY_INPUT)->Destination,
(SIZE_T)INPUT(PFILL_MEMORY_INPUT)->Size,
(BYTE)INPUT(PFILL_MEMORY_INPUT)->FillingByte
);
break;
case ALLOC_PHYSICAL_MEMORY:
*OUTPUT(PUINT64) = (SIZE_T)AllocPhysicalMemory(
INPUT(PALLOC_PHYSICAL_MEMORY_INPUT)->PhysicalAddress,
(SIZE_T)INPUT(PALLOC_PHYSICAL_MEMORY_INPUT)->Size
);
SET_RESPONSE_LENGTH(sizeof(UINT64));
break;
case FREE_PHYSICAL_MEMORY:
FreePhysicalMemory((PVOID)*INPUT(PUINT64));
break;
case GET_PHYSICAL_ADDRESS:
*OUTPUT(PPHYSICAL_ADDRESS) = GetPhysicalAddressInProcess(
(HANDLE)INPUT(PGET_PHYSICAL_ADDRESS_INPUT)->ProcessID,
(PVOID)INPUT(PGET_PHYSICAL_ADDRESS_INPUT)->VirtualAddress
);
SET_RESPONSE_LENGTH(sizeof(PHYSICAL_ADDRESS));
break;
case READ_PHYSICAL_MEMORY:
*OUTPUT(PBOOL) = ReadPhysicalMemory(
INPUT(PREAD_PHYSICAL_MEMORY_INPUT)->PhysicalAddress,
(PVOID)INPUT(PREAD_PHYSICAL_MEMORY_INPUT)->Buffer,
INPUT(PREAD_PHYSICAL_MEMORY_INPUT)->BufferSize
);
SET_RESPONSE_LENGTH(sizeof(BOOL));
break;
case WRITE_PHYSICAL_MEMORY:
*OUTPUT(PBOOL) = WritePhysicalMemory(
INPUT(PWRITE_PHYSICAL_MEMORY_INPUT)->PhysicalAddress,
(PVOID)INPUT(PWRITE_PHYSICAL_MEMORY_INPUT)->Buffer,
INPUT(PWRITE_PHYSICAL_MEMORY_INPUT)->BufferSize
);
SET_RESPONSE_LENGTH(sizeof(BOOL));
break;
case READ_DMI_MEMORY:
ReadDmiMemory((PVOID)*INPUT(PUINT64), DMI_SIZE);
SET_RESPONSE_LENGTH(DMI_SIZE);
break;
// ShellCode:
case EXECUTE_SHELL_CODE:
*OUTPUT(PSHELL_STATUS) = ExecuteShell(
(PVOID)INPUT(PEXECUTE_SHELL_CODE_INPUT)->EntryPoint,
(PVOID)INPUT(PEXECUTE_SHELL_CODE_INPUT)->CodeBlock,
(PVOID)INPUT(PEXECUTE_SHELL_CODE_INPUT)->InputData,
(PVOID)INPUT(PEXECUTE_SHELL_CODE_INPUT)->OutputData,
(PVOID)INPUT(PEXECUTE_SHELL_CODE_INPUT)->Result
);
SET_RESPONSE_LENGTH(sizeof(SHELL_STATUS));
break;
// ProcessesUtils:
case ALLOC_VIRTUAL_MEMORY:
OUTPUT(PALLOC_VIRTUAL_MEMORY_OUTPUT)->Status = VirtualAllocInProcess(
(HANDLE)INPUT(PALLOC_VIRTUAL_MEMORY_INPUT)->ProcessId,
(SIZE_T)INPUT(PALLOC_VIRTUAL_MEMORY_INPUT)->Size,
(PVOID*)&OUTPUT(PALLOC_VIRTUAL_MEMORY_OUTPUT)->VirtualAddress
);
SET_RESPONSE_LENGTH(sizeof(ALLOC_VIRTUAL_MEMORY_OUTPUT));
break;
case FREE_VIRTUAL_MEMORY:
*OUTPUT(PNTSTATUS) = VirtualFreeInProcess(
(HANDLE)INPUT(PFREE_VIRTUAL_MEMORY_INPUT)->ProcessId,
(PVOID)INPUT(PFREE_VIRTUAL_MEMORY_INPUT)->VirtualAddress
);
SET_RESPONSE_LENGTH(sizeof(NTSTATUS));
break;
case MAP_VIRTUAL_MEMORY:
OUTPUT(PMAP_VIRTUAL_MEMORY_OUTPUT)->MappedMemory = MapVirtualMemory(
(HANDLE)INPUT(PMAP_VIRTUAL_MEMORY_INPUT)->ProcessId,
INPUT(PMAP_VIRTUAL_MEMORY_INPUT)->VirtualAddress,
INPUT(PMAP_VIRTUAL_MEMORY_INPUT)->MapToVirtualAddress,
INPUT(PMAP_VIRTUAL_MEMORY_INPUT)->Size,
UserMode,
(PMDL*)&(OUTPUT(PMAP_VIRTUAL_MEMORY_OUTPUT)->Mdl)
);
SET_RESPONSE_LENGTH(sizeof(MAP_VIRTUAL_MEMORY_OUTPUT));
break;
case UNMAP_VIRTUAL_MEMORY:
UnmapVirtualMemory(
INPUT(PUNMAP_VIRTUAL_MEMORY_INPUT)->Mdl,
INPUT(PUNMAP_VIRTUAL_MEMORY_INPUT)->MappedMemory
);
break;
case READ_PROCESS_MEMORY:
*OUTPUT(PBOOL) = ReadProcessMemory(
(HANDLE)INPUT(PREAD_PROCESS_MEMORY_INPUT)->ProcessId,
(PVOID)INPUT(PREAD_PROCESS_MEMORY_INPUT)->VirtualAddress,
(PVOID)INPUT(PREAD_PROCESS_MEMORY_INPUT)->Buffer,
INPUT(PREAD_PROCESS_MEMORY_INPUT)->BytesToRead,
TRUE,
(MEMORY_ACCESS_TYPE)INPUT(PREAD_PROCESS_MEMORY_INPUT)->AccessType
);
SET_RESPONSE_LENGTH(sizeof(BOOL));
break;
case WRITE_PROCESS_MEMORY:
*OUTPUT(PBOOL) = WriteProcessMemory(
(HANDLE)INPUT(PWRITE_PROCESS_MEMORY_INPUT)->ProcessId,
(PVOID)INPUT(PWRITE_PROCESS_MEMORY_INPUT)->VirtualAddress,
(PVOID)INPUT(PWRITE_PROCESS_MEMORY_INPUT)->Buffer,
INPUT(PWRITE_PROCESS_MEMORY_INPUT)->BytesToWrite,
TRUE,
(MEMORY_ACCESS_TYPE)INPUT(PWRITE_PROCESS_MEMORY_INPUT)->AccessType
);
SET_RESPONSE_LENGTH(sizeof(BOOL));
break;
case RAISE_IOPL_BY_TF:
#ifdef _AMD64_
RaiseIOPLByTrapFrame();
#else
Status = STATUS_NOT_IMPLEMENTED;
#endif
break;
case RESET_IOPL_BY_TF:
#ifdef _AMD64_
ResetIOPLByTrapFrame();
#else
Status = STATUS_NOT_IMPLEMENTED;
#endif
break;
case RAISE_IOPL_BY_TF_SCAN:
RaiseIOPLByTrapFrameScan();
break;
case RESET_IOPL_BY_TF_SCAN:
ResetIOPLByTrapFrameScan();
break;
case RAISE_IOPL_BY_TSS:
#ifdef _X86_
RaiseIOPLByTSS();
#else
Status = STATUS_NOT_IMPLEMENTED;
#endif
break;
case RESET_IOPL_BY_TSS:
#ifdef _x86_
ResetIOPLByTSS();
#else
Status = STATUS_NOT_IMPLEMENTED;
#endif
break;
case RAISE_IOPM:
#ifdef _X86_
*OUTPUT(PNTSTATUS) = RaiseIOPM((HANDLE)*INPUT(PUINT64));
SET_RESPONSE_LENGTH(sizeof(NTSTATUS));
#else
Status = STATUS_NOT_IMPLEMENTED;
#endif
break;
case RESET_IOPM:
#ifdef _X86_
*OUTPUT(PNTSTATUS) = ResetIOPM((HANDLE)*INPUT(PUINT64));
SET_RESPONSE_LENGTH(sizeof(NTSTATUS));
#else
Status = STATUS_NOT_IMPLEMENTED;
#endif
break;
// PCI:
case READ_PCI_CONFIG:
OUTPUT(PREAD_PCI_CONFIG_OUTPUT)->Status = ReadPciConfig(
INPUT(PREAD_PCI_CONFIG_INPUT)->PciAddress,
INPUT(PREAD_PCI_CONFIG_INPUT)->PciOffset,
(PVOID)INPUT(PREAD_PCI_CONFIG_INPUT)->Buffer,
INPUT(PREAD_PCI_CONFIG_INPUT)->BufferSize,
&OUTPUT(PREAD_PCI_CONFIG_OUTPUT)->BytesRead
);
SET_RESPONSE_LENGTH(sizeof(READ_PCI_CONFIG_OUTPUT));
break;
case WRITE_PCI_CONFIG:
OUTPUT(PWRITE_PCI_CONFIG_OUTPUT)->Status = WritePciConfig(
INPUT(PWRITE_PCI_CONFIG_INPUT)->PciAddress,
INPUT(PWRITE_PCI_CONFIG_INPUT)->PciOffset,
(PVOID)INPUT(PWRITE_PCI_CONFIG_INPUT)->Buffer,
INPUT(PWRITE_PCI_CONFIG_INPUT)->BufferSize,
&OUTPUT(PWRITE_PCI_CONFIG_OUTPUT)->BytesWritten
);
SET_RESPONSE_LENGTH(sizeof(WRITE_PCI_CONFIG_OUTPUT));
break;
default:
Status = STATUS_NOT_IMPLEMENTED;
break;
}
return Status;
#undef INPUT
#undef OUTPUT
#undef SET_RESPONSE_LENGTH
}
static void writePmReg(UINT8 reg, UINT8 data)
{
__outbyte(PMIO_INDEX_REG, reg);
__outbyte(PMIO_DATA_REG, data);
}
VOID
NTAPI
HalpInitializeLegacyPIC(VOID)
{
I8259_ICW1 Icw1;
I8259_ICW2 Icw2;
I8259_ICW3 Icw3;
I8259_ICW4 Icw4;
/* Initialize ICW1 for master, interval 8, edge-triggered mode with ICW4 */
Icw1.NeedIcw4 = TRUE;
Icw1.OperatingMode = Cascade;
Icw1.Interval = Interval8;
Icw1.InterruptMode = EdgeTriggered;
Icw1.Init = TRUE;
Icw1.InterruptVectorAddress = 0;
__outbyte(PIC1_CONTROL_PORT, Icw1.Bits);
/* ICW2 - interrupt vector offset */
Icw2.Bits = PRIMARY_VECTOR_BASE;
__outbyte(PIC1_DATA_PORT, Icw2.Bits);
/* Connect slave to IRQ 2 */
Icw3.Bits = 0;
Icw3.SlaveIrq2 = TRUE;
__outbyte(PIC1_DATA_PORT, Icw3.Bits);
/* Enable 8086 mode, non-automatic EOI, non-buffered mode, non special fully nested mode */
Icw4.SystemMode = New8086Mode;
Icw4.EoiMode = NormalEoi;
Icw4.BufferedMode = NonBuffered;
Icw4.SpecialFullyNestedMode = FALSE;
Icw4.Reserved = 0;
__outbyte(PIC1_DATA_PORT, Icw4.Bits);
/* Mask all interrupts */
__outbyte(PIC1_DATA_PORT, 0xFF);
/* Initialize ICW1 for slave, interval 8, edge-triggered mode with ICW4 */
Icw1.NeedIcw4 = TRUE;
Icw1.InterruptMode = EdgeTriggered;
Icw1.OperatingMode = Cascade;
Icw1.Interval = Interval8;
Icw1.Init = TRUE;
Icw1.InterruptVectorAddress = 0; /* This is only used in MCS80/85 mode */
__outbyte(PIC2_CONTROL_PORT, Icw1.Bits);
/* Set interrupt vector base */
Icw2.Bits = PRIMARY_VECTOR_BASE + 8;
__outbyte(PIC2_DATA_PORT, Icw2.Bits);
/* Slave ID */
Icw3.Bits = 0;
Icw3.SlaveId = 2;
__outbyte(PIC2_DATA_PORT, Icw3.Bits);
/* Enable 8086 mode, non-automatic EOI, non-buffered mode, non special fully nested mode */
Icw4.SystemMode = New8086Mode;
Icw4.EoiMode = NormalEoi;
Icw4.BufferedMode = NonBuffered;
Icw4.SpecialFullyNestedMode = FALSE;
Icw4.Reserved = 0;
__outbyte(PIC2_DATA_PORT, Icw4.Bits);
/* Mask all interrupts */
__outbyte(PIC2_DATA_PORT, 0xFF);
}
static void writePmReg (int reg, int data)
{
__outbyte (0xCD6, reg);
__outbyte (0xCD7, data);
}
