// Create an output MPE LUT from agiven profile. Version mismatches are handled here
cmsPipeline* _cmsReadOutputLUT(cmsHPROFILE hProfile, int Intent)
{
cmsTagTypeSignature OriginalType;
cmsTagSignature tag16 = PCS2Device16[Intent];
cmsTagSignature tagFloat = PCS2DeviceFloat[Intent];
cmsContext ContextID = cmsGetProfileContextID(hProfile);
if (cmsIsTag(hProfile, tagFloat)) { // Float tag takes precedence
// Floating point LUT are always V4, so no adjustment is required
return cmsPipelineDup((cmsPipeline*) cmsReadTag(hProfile, tagFloat));
}
// Revert to perceptual if no tag is found
if (!cmsIsTag(hProfile, tag16)) {
tag16 = PCS2Device16[0];
}
if (cmsIsTag(hProfile, tag16)) { // Is there any LUT-Based table?
// Check profile version and LUT type. Do the necessary adjustments if needed
// First read the tag
cmsPipeline* Lut = (cmsPipeline*) cmsReadTag(hProfile, tag16);
if (Lut == NULL) return NULL;
// After reading it, we have info about the original type
OriginalType = _cmsGetTagTrueType(hProfile, tag16);
// The profile owns the Lut, so we need to copy it
Lut = cmsPipelineDup(Lut);
if (Lut == NULL) return NULL;
// Now it is time for a controversial stuff. I found that for 3D LUTS using
// Lab used as indexer space, trilinear interpolation should be used
if (cmsGetPCS(hProfile) == cmsSigLabData)
ChangeInterpolationToTrilinear(Lut);
// We need to adjust data only for Lab and Lut16 type
if (OriginalType != cmsSigLut16Type || cmsGetPCS(hProfile) != cmsSigLabData)
return Lut;
// Add a matrix for conversion V4 to V2 Lab PCS
cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocLabV4ToV2(ContextID));
return Lut;
}
// Lut not found, try to create a matrix-shaper
// Check if this is a grayscale profile.
if (cmsGetColorSpace(hProfile) == cmsSigGrayData) {
// if so, build appropiate conversion tables.
// The tables are the PCS iluminant, scaled across GrayTRC
return BuildGrayOutputPipeline(hProfile);
}
// Not gray, create a normal matrix-shaper
return BuildRGBOutputMatrixShaper(hProfile);
}
// Read and create a BRAND NEW MPE LUT from a given profile. All stuff dependent of version, etc
// is adjusted here in order to create a LUT that takes care of all those details
cmsPipeline* _cmsReadInputLUT(cmsHPROFILE hProfile, int Intent)
{
cmsTagTypeSignature OriginalType;
cmsTagSignature tag16 = Device2PCS16[Intent];
cmsTagSignature tagFloat = Device2PCSFloat[Intent];
cmsContext ContextID = cmsGetProfileContextID(hProfile);
if (cmsIsTag(hProfile, tagFloat)) { // Float tag takes precedence
// Floating point LUT are always V4, so no adjustment is required
return cmsPipelineDup((cmsPipeline*) cmsReadTag(hProfile, tagFloat));
}
// Revert to perceptual if no tag is found
if (!cmsIsTag(hProfile, tag16)) {
tag16 = Device2PCS16[0];
}
if (cmsIsTag(hProfile, tag16)) { // Is there any LUT-Based table?
// Check profile version and LUT type. Do the necessary adjustments if needed
// First read the tag
cmsPipeline* Lut = (cmsPipeline*) cmsReadTag(hProfile, tag16);
if (Lut == NULL) return NULL;
// After reading it, we have now info about the original type
OriginalType = _cmsGetTagTrueType(hProfile, tag16);
// The profile owns the Lut, so we need to copy it
Lut = cmsPipelineDup(Lut);
// We need to adjust data only for Lab16 on output
if (OriginalType != cmsSigLut16Type || cmsGetPCS(hProfile) != cmsSigLabData)
return Lut;
// If the input is Lab, add also a conversion at the begin
if (cmsGetColorSpace(hProfile) == cmsSigLabData)
cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocLabV4ToV2(ContextID));
// Add a matrix for conversion V2 to V4 Lab PCS
cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID));
return Lut;
}
// Lut was not found, try to create a matrix-shaper
// Check if this is a grayscale profile.
if (cmsGetColorSpace(hProfile) == cmsSigGrayData) {
// if so, build appropiate conversion tables.
// The tables are the PCS iluminant, scaled across GrayTRC
return BuildGrayInputMatrixPipeline(hProfile);
}
// Not gray, create a normal matrix-shaper
return BuildRGBInputMatrixShaper(hProfile);
}
// This one includes abstract profiles as well. Matrix-shaper cannot be obtained on that device class. The
// tag name here may default to AToB0
cmsPipeline* _cmsReadDevicelinkLUT(cmsHPROFILE hProfile, int Intent)
{
cmsPipeline* Lut;
cmsTagTypeSignature OriginalType;
cmsTagSignature tag16 = Device2PCS16[Intent];
cmsTagSignature tagFloat = Device2PCSFloat[Intent];
cmsContext ContextID = cmsGetProfileContextID(hProfile);
if (cmsIsTag(hProfile, tagFloat)) { // Float tag takes precedence
// Floating point LUT are always V4, no adjustment is required
return cmsPipelineDup((cmsPipeline*) cmsReadTag(hProfile, tagFloat));
}
tagFloat = Device2PCSFloat[0];
if (cmsIsTag(hProfile, tagFloat)) {
return cmsPipelineDup((cmsPipeline*) cmsReadTag(hProfile, tagFloat));
}
if (!cmsIsTag(hProfile, tag16)) { // Is there any LUT-Based table?
tag16 = Device2PCS16[0];
if (!cmsIsTag(hProfile, tag16)) return NULL;
}
// Check profile version and LUT type. Do the necessary adjustments if needed
// Read the tag
Lut = (cmsPipeline*) cmsReadTag(hProfile, tag16);
if (Lut == NULL) return NULL;
// The profile owns the Lut, so we need to copy it
Lut = cmsPipelineDup(Lut);
// After reading it, we have info about the original type
OriginalType = _cmsGetTagTrueType(hProfile, tag16);
// We need to adjust data for Lab16 on output
if (OriginalType != cmsSigLut16Type) return Lut;
// Here it is possible to get Lab on both sides
if (cmsGetPCS(hProfile) == cmsSigLabData) {
cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocLabV4ToV2(ContextID));
}
if (cmsGetColorSpace(hProfile) == cmsSigLabData) {
cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID));
}
return Lut;
}
// This one includes abstract profiles as well. Matrix-shaper cannot be obtained on that device class. The
// tag name here may default to AToB0
cmsPipeline* _cmsReadDevicelinkLUT(cmsHPROFILE hProfile, int Intent)
{
cmsPipeline* Lut;
cmsTagTypeSignature OriginalType;
cmsTagSignature tag16;
cmsTagSignature tagFloat;
cmsContext ContextID = cmsGetProfileContextID(hProfile);
if (Intent < INTENT_PERCEPTUAL || Intent > INTENT_ABSOLUTE_COLORIMETRIC)
return NULL;
tag16 = Device2PCS16[Intent];
tagFloat = Device2PCSFloat[Intent];
// On named color, take the appropriate tag
if (cmsGetDeviceClass(hProfile) == cmsSigNamedColorClass) {
cmsNAMEDCOLORLIST* nc = (cmsNAMEDCOLORLIST*)cmsReadTag(hProfile, cmsSigNamedColor2Tag);
if (nc == NULL) return NULL;
Lut = cmsPipelineAlloc(ContextID, 0, 0);
if (Lut == NULL)
goto Error;
if (!cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocNamedColor(nc, FALSE)))
goto Error;
if (cmsGetColorSpace(hProfile) == cmsSigLabData)
if (!cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID)))
goto Error;
return Lut;
Error:
cmsPipelineFree(Lut);
cmsFreeNamedColorList(nc);
return NULL;
}
if (cmsIsTag(hProfile, tagFloat)) { // Float tag takes precedence
// Floating point LUT are always V
return _cmsReadFloatDevicelinkTag(hProfile, tagFloat);
}
tagFloat = Device2PCSFloat[0];
if (cmsIsTag(hProfile, tagFloat)) {
return cmsPipelineDup((cmsPipeline*)cmsReadTag(hProfile, tagFloat));
}
if (!cmsIsTag(hProfile, tag16)) { // Is there any LUT-Based table?
tag16 = Device2PCS16[0];
if (!cmsIsTag(hProfile, tag16)) return NULL;
}
// Check profile version and LUT type. Do the necessary adjustments if needed
// Read the tag
Lut = (cmsPipeline*)cmsReadTag(hProfile, tag16);
if (Lut == NULL) return NULL;
// The profile owns the Lut, so we need to copy it
Lut = cmsPipelineDup(Lut);
if (Lut == NULL) return NULL;
// Now it is time for a controversial stuff. I found that for 3D LUTS using
// Lab used as indexer space, trilinear interpolation should be used
if (cmsGetPCS(hProfile) == cmsSigLabData)
ChangeInterpolationToTrilinear(Lut);
// After reading it, we have info about the original type
OriginalType = _cmsGetTagTrueType(hProfile, tag16);
// We need to adjust data for Lab16 on output
if (OriginalType != cmsSigLut16Type) return Lut;
// Here it is possible to get Lab on both sides
if (cmsGetColorSpace(hProfile) == cmsSigLabData) {
if (!cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocLabV4ToV2(ContextID)))
goto Error2;
}
if (cmsGetPCS(hProfile) == cmsSigLabData) {
if (!cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID)))
goto Error2;
}
return Lut;
Error2:
cmsPipelineFree(Lut);
return NULL;
}
// Read and create a BRAND NEW MPE LUT from a given profile. All stuff dependent of version, etc
// is adjusted here in order to create a LUT that takes care of all those details.
// We add intent = -1 as a way to read matrix shaper always, no matter of other LUT
cmsPipeline* _cmsReadInputLUT(cmsHPROFILE hProfile, int Intent)
{
cmsTagTypeSignature OriginalType;
cmsTagSignature tag16;
cmsTagSignature tagFloat;
cmsContext ContextID = cmsGetProfileContextID(hProfile);
// On named color, take the appropriate tag
if (cmsGetDeviceClass(hProfile) == cmsSigNamedColorClass) {
cmsPipeline* Lut;
cmsNAMEDCOLORLIST* nc = (cmsNAMEDCOLORLIST*) cmsReadTag(hProfile, cmsSigNamedColor2Tag);
if (nc == NULL) return NULL;
Lut = cmsPipelineAlloc(ContextID, 0, 0);
if (Lut == NULL) {
cmsFreeNamedColorList(nc);
return NULL;
}
if (!cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocNamedColor(nc, TRUE)) ||
!cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID))) {
cmsPipelineFree(Lut);
return NULL;
}
return Lut;
}
// This is an attempt to reuse this function to retrieve the matrix-shaper as pipeline no
// matter other LUT are present and have precedence. Intent = -1 means just this.
if (Intent >= INTENT_PERCEPTUAL && Intent <= INTENT_ABSOLUTE_COLORIMETRIC) {
tag16 = Device2PCS16[Intent];
tagFloat = Device2PCSFloat[Intent];
if (cmsIsTag(hProfile, tagFloat)) { // Float tag takes precedence
// Floating point LUT are always V4, but the encoding range is no
// longer 0..1.0, so we need to add an stage depending on the color space
return _cmsReadFloatInputTag(hProfile, tagFloat);
}
// Revert to perceptual if no tag is found
if (!cmsIsTag(hProfile, tag16)) {
tag16 = Device2PCS16[0];
}
if (cmsIsTag(hProfile, tag16)) { // Is there any LUT-Based table?
// Check profile version and LUT type. Do the necessary adjustments if needed
// First read the tag
cmsPipeline* Lut = (cmsPipeline*) cmsReadTag(hProfile, tag16);
if (Lut == NULL) return NULL;
// After reading it, we have now info about the original type
OriginalType = _cmsGetTagTrueType(hProfile, tag16);
// The profile owns the Lut, so we need to copy it
Lut = cmsPipelineDup(Lut);
// We need to adjust data only for Lab16 on output
if (OriginalType != cmsSigLut16Type || cmsGetPCS(hProfile) != cmsSigLabData)
return Lut;
// If the input is Lab, add also a conversion at the begin
if (cmsGetColorSpace(hProfile) == cmsSigLabData &&
!cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocLabV4ToV2(ContextID)))
goto Error;
// Add a matrix for conversion V2 to V4 Lab PCS
if (!cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID)))
goto Error;
return Lut;
Error:
cmsPipelineFree(Lut);
return NULL;
}
}
// Lut was not found, try to create a matrix-shaper
// Check if this is a grayscale profile.
if (cmsGetColorSpace(hProfile) == cmsSigGrayData) {
// if so, build appropriate conversion tables.
// The tables are the PCS iluminant, scaled across GrayTRC
return BuildGrayInputMatrixPipeline(hProfile);
}
// Not gray, create a normal matrix-shaper
return BuildRGBInputMatrixShaper(hProfile);
}
// Does convert a transform into a device link profile
cmsHPROFILE CMSEXPORT cmsTransform2DeviceLink(cmsHTRANSFORM hTransform, cmsFloat64Number Version, cmsUInt32Number dwFlags)
{
cmsHPROFILE hProfile = NULL;
cmsUInt32Number FrmIn, FrmOut, ChansIn, ChansOut;
cmsUInt32Number ColorSpaceBitsIn, ColorSpaceBitsOut;
_cmsTRANSFORM* xform = (_cmsTRANSFORM*) hTransform;
cmsPipeline* LUT = NULL;
cmsStage* mpe;
cmsContext ContextID = cmsGetTransformContextID(hTransform);
const cmsAllowedLUT* AllowedLUT;
cmsTagSignature DestinationTag;
cmsProfileClassSignature deviceClass;
_cmsAssert(hTransform != NULL);
// Get the first mpe to check for named color
mpe = cmsPipelineGetPtrToFirstStage(xform ->Lut);
// Check if is a named color transform
if (mpe != NULL) {
if (cmsStageType(mpe) == cmsSigNamedColorElemType) {
return CreateNamedColorDevicelink(hTransform);
}
}
// First thing to do is to get a copy of the transformation
LUT = cmsPipelineDup(xform ->Lut);
if (LUT == NULL) return NULL;
// Time to fix the Lab2/Lab4 issue.
if ((xform ->EntryColorSpace == cmsSigLabData) && (Version < 4.0)) {
if (!cmsPipelineInsertStage(LUT, cmsAT_BEGIN, _cmsStageAllocLabV2ToV4curves(ContextID)))
goto Error;
}
// On the output side too
if ((xform ->ExitColorSpace) == cmsSigLabData && (Version < 4.0)) {
if (!cmsPipelineInsertStage(LUT, cmsAT_END, _cmsStageAllocLabV4ToV2(ContextID)))
goto Error;
}
hProfile = cmsCreateProfilePlaceholder(ContextID);
if (!hProfile) goto Error; // can't allocate
cmsSetProfileVersion(hProfile, Version);
FixColorSpaces(hProfile, xform -> EntryColorSpace, xform -> ExitColorSpace, dwFlags);
// Optimize the LUT and precalculate a devicelink
ChansIn = cmsChannelsOf(xform -> EntryColorSpace);
ChansOut = cmsChannelsOf(xform -> ExitColorSpace);
ColorSpaceBitsIn = _cmsLCMScolorSpace(xform -> EntryColorSpace);
ColorSpaceBitsOut = _cmsLCMScolorSpace(xform -> ExitColorSpace);
FrmIn = COLORSPACE_SH(ColorSpaceBitsIn) | CHANNELS_SH(ChansIn)|BYTES_SH(2);
FrmOut = COLORSPACE_SH(ColorSpaceBitsOut) | CHANNELS_SH(ChansOut)|BYTES_SH(2);
deviceClass = cmsGetDeviceClass(hProfile);
if (deviceClass == cmsSigOutputClass)
DestinationTag = cmsSigBToA0Tag;
else
DestinationTag = cmsSigAToB0Tag;
// Check if the profile/version can store the result
if (dwFlags & cmsFLAGS_FORCE_CLUT)
AllowedLUT = NULL;
else
AllowedLUT = FindCombination(LUT, Version >= 4.0, DestinationTag);
if (AllowedLUT == NULL) {
// Try to optimize
_cmsOptimizePipeline(ContextID, &LUT, xform ->RenderingIntent, &FrmIn, &FrmOut, &dwFlags);
AllowedLUT = FindCombination(LUT, Version >= 4.0, DestinationTag);
}
// If no way, then force CLUT that for sure can be written
if (AllowedLUT == NULL) {
dwFlags |= cmsFLAGS_FORCE_CLUT;
_cmsOptimizePipeline(ContextID, &LUT, xform ->RenderingIntent, &FrmIn, &FrmOut, &dwFlags);
// Put identity curves if needed
if (cmsPipelineGetPtrToFirstStage(LUT) ->Type != cmsSigCurveSetElemType)
if (!cmsPipelineInsertStage(LUT, cmsAT_BEGIN, _cmsStageAllocIdentityCurves(ContextID, ChansIn)))
goto Error;
if (cmsPipelineGetPtrToLastStage(LUT) ->Type != cmsSigCurveSetElemType)
if (!cmsPipelineInsertStage(LUT, cmsAT_END, _cmsStageAllocIdentityCurves(ContextID, ChansOut)))
goto Error;
AllowedLUT = FindCombination(LUT, Version >= 4.0, DestinationTag);
}
// Somethings is wrong...
if (AllowedLUT == NULL) {
goto Error;
}
if (dwFlags & cmsFLAGS_8BITS_DEVICELINK)
cmsPipelineSetSaveAs8bitsFlag(LUT, TRUE);
// Tag profile with information
if (!SetTextTags(hProfile, L"devicelink")) goto Error;
// Store result
if (!cmsWriteTag(hProfile, DestinationTag, LUT)) goto Error;
if (xform -> InputColorant != NULL) {
if (!cmsWriteTag(hProfile, cmsSigColorantTableTag, xform->InputColorant)) goto Error;
}
if (xform -> OutputColorant != NULL) {
if (!cmsWriteTag(hProfile, cmsSigColorantTableOutTag, xform->OutputColorant)) goto Error;
}
if ((deviceClass == cmsSigLinkClass) && (xform ->Sequence != NULL)) {
if (!_cmsWriteProfileSequence(hProfile, xform ->Sequence)) goto Error;
}
// Set the white point
if (deviceClass == cmsSigInputClass) {
if (!cmsWriteTag(hProfile, cmsSigMediaWhitePointTag, &xform ->EntryWhitePoint)) goto Error;
}
else {
if (!cmsWriteTag(hProfile, cmsSigMediaWhitePointTag, &xform ->ExitWhitePoint)) goto Error;
}
// Per 7.2.15 in spec 4.3
cmsSetHeaderRenderingIntent(hProfile, xform ->RenderingIntent);
cmsPipelineFree(LUT);
return hProfile;
Error:
if (LUT != NULL) cmsPipelineFree(LUT);
cmsCloseProfile(hProfile);
return NULL;
}
