int ext_disp_trigger(int blocking, void *callback, unsigned int userdata)
{
int ret = 0;
EXT_DISP_FUNC();
if((is_hdmi_active() == false)|| pgc->state == EXTD_DEINIT || pgc->state == EXTD_SUSPEND || pgc->need_trigger_overlay < 1)
{
EXT_DISP_LOG("trigger ext display is already sleeped\n");
MMProfileLogEx(ddp_mmp_get_events()->Extd_ErrorInfo, MMProfileFlagPulse, Trigger, 0);
return -1;
}
_ext_disp_path_lock();
if(_should_trigger_interface())
{
_trigger_display_interface(blocking, callback, userdata);
}
else
{
_trigger_overlay_engine();
}
pgc->state = EXTD_RESUME;
_ext_disp_path_unlock();
EXT_DISP_LOG("ext_disp_trigger done \n");
return ret;
}
int ext_disp_deinit(char *lcm_name)
{
EXT_DISP_FUNC();
_ext_disp_path_lock();
if(pgc->state == EXTD_DEINIT)
{
goto deinit_exit;
}
dpmgr_path_deinit(pgc->dpmgr_handle, CMDQ_DISABLE);
dpmgr_destroy_path(pgc->dpmgr_handle, NULL);
cmdqRecDestroy(pgc->cmdq_handle_config);
cmdqRecDestroy(pgc->cmdq_handle_trigger);
pgc->state = EXTD_DEINIT;
deinit_exit:
_ext_disp_path_unlock();
is_context_inited = 0;
EXT_DISP_LOG("ext_disp_deinit done \n" );
return 0;
}
int ext_disp_deinit(char *lcm_name)
{
DISPFUNC();
_ext_disp_path_lock();
if(pgc->state == EXTD_DEINIT)
goto deinit_exit;
dpmgr_path_deinit(pgc->dpmgr_handle, CMDQ_DISABLE);
dpmgr_destroy_path(pgc->dpmgr_handle,NULL);
cmdqRecDestroy(pgc->cmdq_handle_config);
cmdqRecDestroy(pgc->cmdq_handle_trigger);
pgc->state = EXTD_DEINIT;
deinit_exit:
_ext_disp_path_unlock();
is_context_inited = 0;
hdmi_smb_kpd_disable();
DISPMSG("ext_disp_deinit done \n" );
}
int ext_disp_suspend(void)
{
EXT_DISP_STATUS ret = EXT_DISP_STATUS_OK;
DISPFUNC();
_ext_disp_path_lock();
if(pgc->state == EXTD_DEINIT || pgc->state == EXTD_SUSPEND)
{
DISPERR("EXTD_DEINIT or EXTD_SUSPEND\n");
goto done;
}
pgc->need_trigger_overlay = 0;
if(dpmgr_path_is_busy(pgc->dpmgr_handle))
{
dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/30);
}
if(ext_disp_use_cmdq == CMDQ_ENABLE)
_cmdq_stop_trigger_loop();
dpmgr_path_stop(pgc->dpmgr_handle, CMDQ_DISABLE);
//ALPS01857347+
dpmgr_path_power_off(pgc->dpmgr_handle, CMDQ_DISABLE);
//-
if(dpmgr_path_is_busy(pgc->dpmgr_handle))
{
dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/30);
}
///if(dpmgr_path_is_busy(pgc->dpmgr_handle))
dpmgr_path_reset(pgc->dpmgr_handle, CMDQ_DISABLE);
#if 0///(dpmgr_path_is_busy2(pgc->dpmgr_handle))
{
dpmgr_path_reset(pgc->dpmgr_handle, CMDQ_DISABLE);
dpmgr_check_status(pgc->dpmgr_handle);
}
#endif
extd_drv_suspend(pgc->plcm);
///dpmgr_path_power_off(pgc->dpmgr_handle, CMDQ_DISABLE);
pgc->state = EXTD_SUSPEND;
done:
_ext_disp_path_unlock();
DISPMSG("ext_disp_suspend done \n");
return ret;
}
// register rdma done event
int ext_disp_wait_for_idle(void)
{
EXT_DISP_STATUS ret = EXT_DISP_STATUS_OK;
EXT_DISP_FUNC();
_ext_disp_path_lock();
_ext_disp_path_unlock();
return ret;
}
int ext_disp_switch_cmdq_cpu(CMDQ_SWITCH use_cmdq)
{
_ext_disp_path_lock();
ext_disp_use_cmdq = use_cmdq;
EXT_DISP_LOG("display driver use %s to config register now\n", (use_cmdq==CMDQ_ENABLE)?"CMDQ":"CPU");
_ext_disp_path_unlock();
return ext_disp_use_cmdq;
}
int ext_disp_is_sleepd(void)
{
unsigned int temp = 0;
//EXT_DISP_FUNC();
_ext_disp_path_lock();
temp = !pgc->state;
_ext_disp_path_unlock();
return temp;
}
int ext_disp_is_alive(void)
{
unsigned int temp = 0;
EXT_DISP_FUNC();
_ext_disp_path_lock();
temp = pgc->state;
_ext_disp_path_unlock();
return temp;
}
int ext_disp_suspend(void)
{
EXT_DISP_STATUS ret = EXT_DISP_STATUS_OK;
EXT_DISP_FUNC();
_ext_disp_path_lock();
if(pgc->state == EXTD_DEINIT || pgc->state == EXTD_SUSPEND)
{
EXT_DISP_ERR("status is not EXTD_RESUME\n");
goto done;
}
pgc->need_trigger_overlay = 0;
if(dpmgr_path_is_busy(pgc->dpmgr_handle))
{
dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/30);
}
if(ext_disp_use_cmdq == CMDQ_ENABLE)
{
_cmdq_stop_trigger_loop();
}
dpmgr_path_stop(pgc->dpmgr_handle, CMDQ_DISABLE);
dpmgr_path_power_off(pgc->dpmgr_handle, CMDQ_DISABLE);
if(dpmgr_path_is_busy(pgc->dpmgr_handle))
{
dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/30);
}
dpmgr_path_reset(pgc->dpmgr_handle, CMDQ_DISABLE);
extd_drv_suspend(pgc->plcm);
pgc->state = EXTD_SUSPEND;
done:
_ext_disp_path_unlock();
EXT_DISP_LOG("ext_disp_suspend done \n");
return ret;
}
int ext_disp_resume(void)
{
EXT_DISP_STATUS ret = EXT_DISP_STATUS_OK;
EXT_DISP_FUNC();
_ext_disp_path_lock();
if(pgc->state != EXTD_SUSPEND)
{
EXT_DISP_ERR("EXTD_DEINIT/EXTD_INIT/EXTD_RESUME \n");
goto done;
}
if(_should_reset_cmdq_config_handle())
{
_cmdq_reset_config_handle();
}
dpmgr_path_power_on(pgc->dpmgr_handle, CMDQ_DISABLE);
extd_drv_resume(pgc->plcm);
if(ext_disp_use_cmdq == CMDQ_ENABLE)
{
_cmdq_start_trigger_loop();
}
if(dpmgr_path_is_busy(pgc->dpmgr_handle))
{
EXT_DISP_LOG("stop display path failed, still busy\n");
ret = -1;
goto done;
}
pgc->state = EXTD_RESUME;
done:
_ext_disp_path_unlock();
EXT_DISP_LOG("ext_disp_resume done \n");
return ret;
}
int ext_disp_resume(void)
{
EXT_DISP_STATUS ret = EXT_DISP_STATUS_OK;
_ext_disp_path_lock();
if(pgc->state < EXTD_INIT)
{
DISPERR("EXTD_DEINIT \n");
goto done;
}
dpmgr_path_power_on(pgc->dpmgr_handle, CMDQ_DISABLE);
extd_drv_resume(pgc->plcm);
///dpmgr_path_start(pgc->dpmgr_handle, CMDQ_DISABLE);
if(ext_disp_use_cmdq == CMDQ_ENABLE)
_cmdq_start_trigger_loop();
if(dpmgr_path_is_busy(pgc->dpmgr_handle))
{
DISPCHECK("stop display path failed, still busy\n");
ret = -1;
goto done;
}
pgc->state = EXTD_RESUME;
done:
_ext_disp_path_unlock();
DISPMSG("ext_disp_resume done \n");
return ret;
}
int ext_disp_init(char *lcm_name, unsigned int session)
{
EXT_DISP_FUNC();
EXT_DISP_STATUS ret = EXT_DISP_STATUS_OK;
//DISP_MODULE_ENUM dst_module = 0;
LCM_PARAMS *lcm_param = NULL;
//LCM_INTERFACE_ID lcm_id = LCM_INTERFACE_NOTDEFINED;
dpmgr_init();
extd_mutex_init(&(pgc->lock));
_ext_disp_path_lock();
pgc->plcm = extd_drv_probe( lcm_name, LCM_INTERFACE_NOTDEFINED);
if(pgc->plcm == NULL)
{
EXT_DISP_LOG("disp_lcm_probe returns null\n");
ret = EXT_DISP_STATUS_ERROR;
//goto done; //Donglei
}
lcm_param = extd_drv_get_params(pgc->plcm);
if(lcm_param == NULL)
{
EXT_DISP_ERR("get lcm params FAILED\n");
ret = EXT_DISP_STATUS_ERROR;
goto done;
}
#if 0
ret = cmdqCoreRegisterCB(CMDQ_GROUP_DISP, cmdqDdpClockOn, cmdqDdpDumpInfo, cmdqDdpResetEng, cmdqDdpClockOff);
if(ret)
{
EXT_DISP_ERR("cmdqCoreRegisterCB failed, ret=%d \n", ret);
ret = EXT_DISP_STATUS_ERROR;
goto done;
}
#endif
ret = cmdqRecCreate(CMDQ_SCENARIO_MHL_DISP, &(pgc->cmdq_handle_config));
if(ret)
{
EXT_DISP_LOG("cmdqRecCreate FAIL, ret=%d \n", ret);
ret = EXT_DISP_STATUS_ERROR;
goto done;
}
else
{
EXT_DISP_LOG("cmdqRecCreate SUCCESS, g_cmdq_handle=%p \n", pgc->cmdq_handle_config);
}
if(ext_disp_mode == EXTD_DIRECT_LINK_MODE)
{
_build_path_direct_link();
// EXT_DISP_LOG("ext_disp display is DIRECT LINK MODE\n");
}
else if(ext_disp_mode == EXTD_DECOUPLE_MODE)
{
_build_path_decouple();
// EXT_DISP_LOG("ext_disp display is DECOUPLE MODE\n");
}
else if(ext_disp_mode == EXTD_SINGLE_LAYER_MODE)
{
_build_path_single_layer();
// EXT_DISP_LOG("ext_disp display is SINGLE LAYER MODE\n");
}
else if(ext_disp_mode == EXTD_RDMA_DPI_MODE)
{
_build_path_rdma_dpi();
// EXT_DISP_LOG("ext_disp display is RDMA to dpi MODE\n");
}
else
{
EXT_DISP_LOG("ext_disp display mode is WRONG\n");
}
if(ext_disp_use_cmdq == CMDQ_ENABLE)
{
_cmdq_build_trigger_loop();
EXT_DISP_LOG("ext_disp display BUILD cmdq trigger loop finished\n");
_cmdq_start_trigger_loop();
}
pgc->session = session;
EXT_DISP_LOG("ext_disp display START cmdq trigger loop finished\n");
dpmgr_path_set_video_mode(pgc->dpmgr_handle, ext_disp_is_video_mode());
dpmgr_path_init(pgc->dpmgr_handle, CMDQ_DISABLE);
disp_ddp_path_config *data_config = (disp_ddp_path_config *)vmalloc(sizeof(disp_ddp_path_config));
if(data_config)
{
memset((void*)data_config, 0, sizeof(disp_ddp_path_config));
memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
data_config->dst_w = lcm_param->width;
data_config->dst_h = lcm_param->height;
data_config->dst_dirty = 1;
init_roi = 0;
ret = dpmgr_path_config(pgc->dpmgr_handle, data_config, CMDQ_DISABLE);
}
else
{
EXT_DISP_LOG("allocate buffer failed!!!\n");
}
if(!extd_drv_is_inited(pgc->plcm))
{
ret = extd_drv_init(pgc->plcm);
}
// this will be set to always enable cmdq later
if(ext_disp_is_video_mode())
{
dpmgr_map_event_to_irq(pgc->dpmgr_handle, DISP_PATH_EVENT_IF_VSYNC, DDP_IRQ_RDMA1_DONE);
}
if(ext_disp_use_cmdq == CMDQ_ENABLE)
{
_cmdq_reset_config_handle();
//_cmdq_insert_wait_frame_done_token(); //Fixed me: why insert EOF event before the first frame start
}
dpmgr_path_power_on(pgc->dpmgr_handle, CMDQ_DISABLE);
pgc->state = EXTD_INIT;
done:
_ext_disp_path_unlock();
dpmgr_path_stop(pgc->dpmgr_handle, CMDQ_DISABLE);
EXT_DISP_LOG("ext_disp_init done \n");
return ret;
}
int ext_disp_config_input_multiple(ext_disp_input_config* input, int idx)
{
int ret = 0;
int i=0;
int layer =0;
///EXT_DISP_FUNC();
disp_ddp_path_config *data_config;
if((is_hdmi_active() == false) || (pgc->state != EXTD_INIT && pgc->state != EXTD_RESUME) )
{
EXT_DISP_LOG("[Donglei]config ext disp is already sleeped, hdmi_active:%d, state:%d\n", is_hdmi_active(), pgc->state);
MMProfileLogEx(ddp_mmp_get_events()->Extd_ErrorInfo, MMProfileFlagPulse, Config, idx );
return -2;
}
_ext_disp_path_lock();
// all dirty should be cleared in dpmgr_path_get_last_config()
data_config = dpmgr_path_get_last_config(pgc->dpmgr_handle);
// hope we can use only 1 input struct for input config, just set layer number
if(_should_config_ovl_input())
{
for(i = 0;i<HW_OVERLAY_COUNT;i++)
{
if(input[i].dirty)
{
ret = _convert_disp_input_to_ovl(&(data_config->ovl_config[input[i].layer]), &input[i]);
dprec_mmp_dump_ovl_layer(&(data_config->ovl_config[input[i].layer]), input[i].layer, 2);
}
if (init_roi == 1)
{
LCM_PARAMS *lcm_param = extd_drv_get_params(pgc->plcm);
memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
if(lcm_param != NULL)
{
EXT_DISP_LOG("set dest w:%d, h:%d\n", lcm_param->width, lcm_param->height);
data_config->dst_w = lcm_param->width;
data_config->dst_h = lcm_param->height;
}
data_config->dst_dirty = 1;
data_config->rdma_config.address = 0;
}
data_config->ovl_dirty = 1;
}
}
else
{
OVL_CONFIG_STRUCT ovl_config;
_convert_disp_input_to_ovl(&ovl_config, input);
dprec_mmp_dump_ovl_layer(&ovl_config, input->layer, 2);
ret = _convert_disp_input_to_rdma(&(data_config->rdma_config), input);
if (data_config->rdma_config.address)
{
data_config->rdma_dirty = 1;
}
}
if(_should_wait_path_idle())
{
dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/2);
}
memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
ret = dpmgr_path_config(pgc->dpmgr_handle, data_config, ext_disp_cmdq_enabled()? pgc->cmdq_handle_config : NULL);
// this is used for decouple mode, to indicate whether we need to trigger ovl
pgc->need_trigger_overlay = 1;
init_roi = 0;
_ext_disp_path_unlock();
if (data_config->ovl_dirty)
{
EXT_DISP_LOG("config_input_multiple idx:%d -w:%d, h:%d, pitch:%d\n", idx ,data_config->ovl_config[0].src_w, data_config->ovl_config[0].src_h, data_config->ovl_config[0].src_pitch);
}else{
EXT_DISP_LOG("config_input_multiple idx:%d -w:%d, h:%d, pitch:%d, mva:%p\n", idx ,data_config->rdma_config.width, data_config->rdma_config.height, data_config->rdma_config.pitch, data_config->rdma_config.address);
}
return ret;
}
int ext_disp_config_input(ext_disp_input_config* input)
{
int ret = 0;
int i=0;
int layer =0;
///EXT_DISP_FUNC();
disp_ddp_path_config *data_config;
if((is_hdmi_active() == false)|| ext_disp_is_sleepd())
{
EXT_DISP_LOG("ext disp is already sleeped\n");
return 0;
}
_ext_disp_path_lock();
data_config = dpmgr_path_get_last_config(pgc->dpmgr_handle);
if(input->layer_en)
{
if(input->vaddr)
{
///_debug_pattern(0x00000000, input->vaddr, input->dst_w, input->dst_h, input->src_pitch, 0x00000000, input->layer, input->buff_idx);
}
else
{
///_debug_pattern(input->addr,0x00000000, input->dst_w, input->dst_h, input->src_pitch, 0x00000000, input->layer, input->buff_idx);
}
}
#ifdef EXTD_DBG_USE_INNER_BUF
if(input->fmt == eYUY2)
{
///input->layer_en = 1;
///memset(input, 0, sizeof(ext_disp_input_config));
input->layer_en = 1;
input->addr = hdmi_mva_r ;
input->vaddr = hdmi_va ;
input->fmt = eRGB888; ///eRGBA8888 eYUY2
input->src_w = 1280;
input->src_h = 720;
input->src_x = 0;
input->src_y = 0;
input->src_pitch = 1280*3;
input->dst_w = 1280;
input->dst_h = 720;
input->dst_x = 0;
input->dst_y = 0;
input->aen = 0;
input->alpha = 0xff;
}
#endif
// hope we can use only 1 input struct for input config, just set layer number
if(_should_config_ovl_input())
{
ret = _convert_disp_input_to_ovl(&(data_config->ovl_config[input->layer]), input);
data_config->ovl_dirty = 1;
}
else
{
ret = _convert_disp_input_to_rdma(&(data_config->rdma_config), input);
data_config->rdma_dirty= 1;
}
///EXT_DISP_ERR("ext_disp_config_input cmdq %d wi %d ovl %d vm %d\n", ext_disp_cmdq_enabled(), _should_wait_path_idle(), _should_config_ovl_input(), ext_disp_is_video_mode());
if(_should_wait_path_idle())
{
dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/2);
}
memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
ret = dpmgr_path_config(pgc->dpmgr_handle, data_config, ext_disp_cmdq_enabled()? pgc->cmdq_handle_config : NULL);
// this is used for decouple mode, to indicate whether we need to trigger ovl
pgc->need_trigger_overlay = 1;
///EXT_DISP_LOG("ext_disp_config_input done \n");
_ext_disp_path_unlock();
return ret;
}
int ext_disp_config_input_multiple(ext_disp_input_config* input, int idx)
{
int ret = 0;
int i=0;
int layer =0;
///DISPFUNC();
disp_ddp_path_config *data_config;
if((is_hdmi_active() == false) || (pgc->state != EXTD_RESUME) )
{
DISPMSG("config ext disp is already sleeped\n");
MMProfileLogEx(ddp_mmp_get_events()->Extd_ErrorInfo, MMProfileFlagPulse, Config, idx );
return 0;
}
_ext_disp_path_lock();
// all dirty should be cleared in dpmgr_path_get_last_config()
data_config = dpmgr_path_get_last_config(pgc->dpmgr_handle);
data_config->dst_dirty = 0;
data_config->ovl_dirty = 0;
data_config->rdma_dirty = 0;
data_config->wdma_dirty = 0;
// hope we can use only 1 input struct for input config, just set layer number
if(_should_config_ovl_input())
{
for(i = 0;i<HW_OVERLAY_COUNT;i++)
{ ///dprec_logger_start(DPREC_LOGGER_PRIMARY_CONFIG, input->layer|(input->layer_en<<16), input->addr);
if(input[i].dirty)
{
dprec_mmp_dump_ovl_layer(&(data_config->ovl_config[input[i].layer]), input[i].layer, 2);
ret = _convert_disp_input_to_ovl(&(data_config->ovl_config[input[i].layer]), &input[i]);
}
/*
else
{
data_config->ovl_config[input[i].layer].layer_en = input[i].layer_en;
data_config->ovl_config[input[i].layer].layer = input[i].layer;
}
*/
data_config->ovl_dirty = 1;
///dprec_logger_done(DPREC_LOGGER_PRIMARY_CONFIG, input->src_x, input->src_y);
}
}
else
{
ret = _convert_disp_input_to_rdma(&(data_config->rdma_config), input);
data_config->rdma_dirty= 1;
}
if(_should_wait_path_idle())
{
dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/2);
}
memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
ret = dpmgr_path_config(pgc->dpmgr_handle, data_config, ext_disp_cmdq_enabled()? pgc->cmdq_handle_config : NULL);
// this is used for decouple mode, to indicate whether we need to trigger ovl
pgc->need_trigger_overlay = 1;
_ext_disp_path_unlock();
DISPMSG("config_input_multiple idx %x -w %d, h %d\n", idx ,data_config->ovl_config[0].src_w, data_config->ovl_config[0].src_h);
return ret;
}
