Beispiel #1
0
static void
avx512f_test (void)
{
  float e = -3.234;
  float v[16];
  union512 res;
  int i, j;

  for (i = 0; i < 16; i++)
    {
      for (j = 0; j < 16; j++)
	v[j] = 0;
      v[i] = e;

      res.x = foo (e, i);

      if (check_union512 (res, v))
	abort ();

      res.x = _mm512_setzero_ps ();

      res.x = foo_r (e, i);

      if (check_union512 (res, v))
	abort ();
    }
}
	static inline mic_m512c_t mic_rcp_cps(mic_m512c_t a) {
		mic_m512_t temp1 = _mm512_add_ps(_mm512_mul_ps(a.xvec, a.xvec), _mm512_mul_ps(a.yvec, a.yvec));
		mic_m512_t temp2 = _mm512_rcp23_ps(temp1);
		mic_m512c_t vec;
		//__m512 neg_mask = _mm512_castsi512_ps(_mm512_set1_epi32(0x80000000));
		vec.xvec = _mm512_mul_ps(a.xvec, temp2);
		//vec.yvec = _mm512_xor_ps(_mm512_mul_ps(a.yvec, temp2), neg_mask);
		mic_m512_t zero = _mm512_setzero_ps();
		vec.yvec = _mm512_sub_ps(zero, _mm512_mul_ps(a.yvec, temp2));
		return vec;
	} // mic_rcp_cps()
Beispiel #3
0
void static
avx512f_test (void)
{
  int i;
  union512 res;
  float res_ref[16];

  res.x = _mm512_setzero_ps ();

  for (i = 0; i < 16; i++)
    res_ref[i] = 0.0;

  if (check_union512 (res, res_ref))
    abort ();
}
__attribute__((noinline)) float dot512(float *x1, float *x2, size_t len) {
  assert(len % 16 == 0);
  __m512 sum = _mm512_setzero_ps();
  if (len > 15) {
    size_t limit = len - 15;
    for (size_t i = 0; i < limit; i += 16) {
      __m512 v1 = _mm512_loadu_ps(x1 + i);
      __m512 v2 = _mm512_loadu_ps(x2 + i);
      sum = _mm512_add_ps(sum, _mm512_mul_ps(v1, v2));
    }
  }
  float buffer[16];
  _mm512_storeu_ps(buffer, sum);
  return buffer[0] + buffer[1] + buffer[2] + buffer[3] + buffer[4] + buffer[5] +
         buffer[6] + buffer[7] + buffer[8] + buffer[9] + buffer[10] +
         buffer[11] + buffer[12] + buffer[13] + buffer[14] + buffer[15];
}
__attribute__((noinline)) float dot512fma2(float *x1, float *x2, size_t len) {
  assert(len % 32 == 0);
  __m512 sum = _mm512_setzero_ps();
  if (len > 31) {
    size_t limit = len - 31;
    for (size_t i = 0; i < limit; i += 32) {

      __m512 v11 = _mm512_loadu_ps(x1 + i);
      __m512 v21 = _mm512_loadu_ps(x2 + i);
      __m512 v12 = _mm512_loadu_ps(x1 + i + 16);
      __m512 v22 = _mm512_loadu_ps(x2 + i + 16);
      sum = _mm512_fmadd_ps(v11, v21, sum);
      sum = _mm512_fmadd_ps(v12, v22, sum);
    }
  }
  float buffer[16];
  _mm512_storeu_ps(buffer, sum);
  return buffer[0] + buffer[1] + buffer[2] + buffer[3] + buffer[4] + buffer[5] +
         buffer[6] + buffer[7] + buffer[8] + buffer[9] + buffer[10] +
         buffer[11] + buffer[12] + buffer[13] + buffer[14] + buffer[15];
}
Beispiel #6
0
static void
avx512f_test (void)
{
  int i;
  float e = 34.5;
  float v[16];
  union512 res;

  for (i = 0; i < 16; i++)
    v[i] = e;

  res.x = foo (e);

  if (check_union512 (res, v))
    abort ();

  res.x = _mm512_setzero_ps ();

  res.x = foo_r (e);

  if (check_union512 (res, v))
    abort ();
}
int main() {
    // Initialize
    int N = 1 << 16;
    int NALIGN = 64;
    int i, j;
    float OPS = 20. * N * N * 1e-9;
    float EPS2 = 1e-6;
    double tic, toc;
    float * x = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    float * y = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    float * z = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    float * m = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    float * p = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    float * ax = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    float * ay = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    float * az = (float*) _mm_malloc(N * sizeof(float), NALIGN);
    #pragma omp parallel for
    for (i=0; i<N; i++) {
        x[i] = drand48();
        y[i] = drand48();
        z[i] = drand48();
        m[i] = drand48() / N;
        p[i] = ax[i] = ay[i] = az[i] = 0;
    }
    printf("N : %d\n",N);

    #pragma omp parallel private(j)
    {
        #pragma omp single
        tic = get_time();
        // Vectorize target with intrinsics
        #pragma omp for
        for (i=0; i<N; i+=16) {
            __m512 pi = _mm512_setzero_ps();
            __m512 axi = _mm512_setzero_ps();
            __m512 ayi = _mm512_setzero_ps();
            __m512 azi = _mm512_setzero_ps();
            __m512 xi = _mm512_load_ps(x+i);
            __m512 yi = _mm512_load_ps(y+i);
            __m512 zi = _mm512_load_ps(z+i);
            for (j=0; j<N; j++) {
                __m512 xj = _mm512_set1_ps(x[j]);
                xj = _mm512_sub_ps(xj, xi);
                __m512 yj = _mm512_set1_ps(y[j]);
                yj = _mm512_sub_ps(yj, yi);
                __m512 zj = _mm512_set1_ps(z[j]);
                zj = _mm512_sub_ps(zj, zi);
                __m512 R2 = _mm512_set1_ps(EPS2);
                R2 = _mm512_fmadd_ps(xj, xj, R2);
                R2 = _mm512_fmadd_ps(yj, yj, R2);
                R2 = _mm512_fmadd_ps(zj, zj, R2);
                __m512 mj = _mm512_set1_ps(m[j]);
                __m512 invR = _mm512_rsqrt23_ps(R2);
                mj = _mm512_mul_ps(mj, invR);
                pi = _mm512_add_ps(pi, mj);
                invR = _mm512_mul_ps(invR, invR);
                invR = _mm512_mul_ps(invR, mj);
                axi = _mm512_fmadd_ps(xj, invR, axi);
                ayi = _mm512_fmadd_ps(yj, invR, ayi);
                azi = _mm512_fmadd_ps(zj, invR, azi);
            }
            _mm512_store_ps(p+i, pi);
            _mm512_store_ps(ax+i, axi);
            _mm512_store_ps(ay+i, ayi);
            _mm512_store_ps(az+i, azi);
        }
        #pragma omp single
        {
            toc = get_time();
            printf("Vectorize target with intrinsics : %e s : %lf GFlops\n",toc-tic, OPS/(toc-tic));

            // Vectorize source with intrinsics
            tic = get_time();
        }
        #pragma omp for
        for (i=0; i<N; i++) {
            __m512 pi = _mm512_setzero_ps();
            __m512 axi = _mm512_setzero_ps();
            __m512 ayi = _mm512_setzero_ps();
            __m512 azi = _mm512_setzero_ps();
            __m512 xi = _mm512_set1_ps(x[i]);
            __m512 yi = _mm512_set1_ps(y[i]);
            __m512 zi = _mm512_set1_ps(z[i]);
            for (j=0; j<N; j+=16) {
                __m512 xj = _mm512_load_ps(x+j);
                xj = _mm512_sub_ps(xj, xi);
                __m512 yj = _mm512_load_ps(y+j);
                yj = _mm512_sub_ps(yj, yi);
                __m512 zj = _mm512_load_ps(z+j);
                zj = _mm512_sub_ps(zj, zi);
                __m512 R2 = _mm512_set1_ps(EPS2);
                R2 = _mm512_fmadd_ps(xj, xj, R2);
                R2 = _mm512_fmadd_ps(yj, yj, R2);
                R2 = _mm512_fmadd_ps(zj, zj, R2);
                __m512 mj = _mm512_load_ps(m+j);
                __m512 invR = _mm512_rsqrt23_ps(R2);
                mj = _mm512_mul_ps(mj, invR);
                pi = _mm512_add_ps(pi, mj);
                invR = _mm512_mul_ps(invR, invR);
                invR = _mm512_mul_ps(invR, mj);
                axi = _mm512_fmadd_ps(xj, invR, axi);
                ayi = _mm512_fmadd_ps(yj, invR, ayi);
                azi = _mm512_fmadd_ps(zj, invR, azi);
            }
            p[i] = _mm512_reduce_add_ps(pi);
            ax[i] = _mm512_reduce_add_ps(axi);
            ay[i] = _mm512_reduce_add_ps(ayi);
            az[i] = _mm512_reduce_add_ps(azi);
        }
        #pragma omp single
        {
            toc = get_time();
            printf("Vectorize source with intrinsics : %e s : %lf GFlops\n",toc-tic, OPS/(toc-tic));

            // Vectorize target with pragma simd
            tic = get_time();
        }
#pragma simd
        #pragma omp for
        for (i=0; i<N; i++) {
            float pi = 0;
            float axi = 0;
            float ayi = 0;
            float azi = 0;
            float xi = x[i];
            float yi = y[i];
            float zi = z[i];
            for (j=0; j<N; j++) {
                float dx = x[j] - xi;
                float dy = y[j] - yi;
                float dz = z[j] - zi;
                float R2 = dx * dx + dy * dy + dz * dz + EPS2;
                float invR = 1.0f / sqrtf(R2);
                float invR3 = m[j] * invR * invR * invR;
                pi += m[j] * invR;
                axi += dx * invR3;
                ayi += dy * invR3;
                azi += dz * invR3;
            }
            p[i] = pi;
            ax[i] = axi;
            ay[i] = ayi;
            az[i] = azi;
        }
        #pragma omp single
        {
            toc = get_time();
            printf("Vectorize target with pragma simd: %e s : %lf GFlops\n",toc-tic, OPS/(toc-tic));

            // Vectorize source with pragma simd
            tic = get_time();
        }
        #pragma omp for
        for (i=0; i<N; i++) {
            float pi = 0;
            float axi = 0;
            float ayi = 0;
            float azi = 0;
            float xi = x[i];
            float yi = y[i];
            float zi = z[i];
#pragma simd
            for (j=0; j<N; j++) {
                float dx = x[j] - xi;
                float dy = y[j] - yi;
                float dz = z[j] - zi;
                float R2 = dx * dx + dy * dy + dz * dz + EPS2;
                float invR = 1.0f / sqrtf(R2);
                float invR3 = m[j] * invR * invR * invR;
                pi += m[j] * invR;
                axi += dx * invR3;
                ayi += dy * invR3;
                azi += dz * invR3;
            }
            p[i] = pi;
            ax[i] = axi;
            ay[i] = ayi;
            az[i] = azi;
        }
        #pragma omp single
        {
            toc = get_time();
            printf("Vectorize source with pragma simd: %e s : %lf GFlops\n",toc-tic, OPS/(toc-tic));
        }
    }

    _mm_free(x);
    _mm_free(y);
    _mm_free(z);
    _mm_free(m);
    _mm_free(p);
    _mm_free(ax);
    _mm_free(ay);
    _mm_free(az);
    return 0;
}
	static inline mic_m512c_t mic_setzero_cps() {
		mic_m512c_t vec;
		vec.xvec = _mm512_setzero_ps();
		vec.yvec = _mm512_setzero_ps();
		return vec;
	} // mic_setzero_cps()
Beispiel #9
0
 static batch_type neg(const batch_type& rhs)
 {
     return _mm512_sub_ps(_mm512_setzero_ps(), rhs);
 }
void AVX512BW_mandelbrot(
	float Re_min, float Re_max,
	float Im_min, float Im_max,
	float threshold,
	int maxiters,
	int width, int height,
	uint8_t *data)

{
	float dRe, dIm;
	int x, y;

	__m128i* ptr = (__m128i*)data;

	// step on Re and Im axis
	dRe = (Re_max - Re_min)/width;
	dIm = (Im_max - Im_min)/height;

	// prepare vectors
	// 1. threshold
    const __m512 vec_threshold = _mm512_set1_ps(threshold);

	// 2. Cim
    __m512 Cim = _mm512_set1_ps(Im_min);

	// 3. Re advance every x iteration
    const __m512 vec_dRe = _mm512_set1_ps(16*dRe);

	// 4. Im advance every y iteration
    const __m512 vec_dIm = _mm512_set1_ps(dIm);

	// calculations
	for (y=0; y < height; y++) {

        __m512 Cre = _mm512_setr_ps(
            Re_min +  0*dRe, Re_min +  1*dRe, Re_min +  2*dRe, Re_min +  3*dRe,
            Re_min +  4*dRe, Re_min +  5*dRe, Re_min +  6*dRe, Re_min +  7*dRe,
            Re_min +  8*dRe, Re_min +  9*dRe, Re_min + 10*dRe, Re_min + 11*dRe,
            Re_min + 12*dRe, Re_min + 13*dRe, Re_min + 14*dRe, Re_min + 15*dRe
        );

		for (x=0; x < width; x+=16) {

            __m512 Xre = _mm512_setzero_ps();
            __m512 Xim = _mm512_setzero_ps();

            __m128i itercount = _mm_setzero_si128();

            int i;
            for (i=0; i < maxiters; i++) {

			    // Tre = Xre^2 - Xim^2 + Cim
                const __m512 Xre2 = _mm512_mul_ps(Xre, Xre);
                const __m512 Xim2 = _mm512_mul_ps(Xim, Xim);
                const __m512 Tre  = _mm512_add_ps(Cre, _mm512_sub_ps(Xre2, Xim2));

			    // Tim = 2*Xre*Xim + Cre
                const __m512 t1  = _mm512_mul_ps(Xre, Xim);
                const __m512 Tim = _mm512_add_ps(Cim, _mm512_add_ps(t1, t1));

                // sqr_dist = Tre^2 + Tim^2
                __m512 Tre2 = _mm512_mul_ps(Tre, Tre);
                __m512 Tim2 = _mm512_mul_ps(Tim, Tim);
                __m512 sqr_dist = _mm512_add_ps(Tre2, Tim2);

                // sqr_dist < threshold => 16-bit mask
                __mmask16 mask = _mm512_cmp_ps_mask(sqr_dist, vec_threshold, _CMP_LE_OS);
                if (mask == 0) {
                    break;
                }

                // Note: unlike SSE/AVX2 versions itercount is a packed byte vector,
                //       thus conversion packed dword -> byte is not needed.
                itercount = _mm_sub_epi8(itercount, _mm_movm_epi8(mask));

                Xre = Tre;
                Xim = Tim;

            } // for

            *ptr++ = itercount;

			// advance Cre vector
            Cre = _mm512_add_ps(Cre, vec_dRe);
		}

		// advance Cim vector
        Cim = _mm512_add_ps(Cim, vec_dIm);
	}
}