static void rtouch_start_read(uint32_t channel)
{
#ifdef AVR32_ADCIFA
volatile avr32_adcifa_t *adcifa = &RTOUCH_ADC;
s_current_channel = channel;
if (channel < 8) {
adcifa_sequence_conversion_opt[0].channel_p = channel;
adcifa_sequence_conversion_opt[0].channel_n = AVR32_ADCIFA_INN_GNDANA;
adcifa_sequence_conversion_opt[0].gain = ADCIFA_SHG_1;
} else {
adcifa_sequence_conversion_opt[0].channel_p = AVR32_ADCIFA_INP_GNDANA;
adcifa_sequence_conversion_opt[0].channel_n = channel;
adcifa_sequence_conversion_opt[0].gain = ADCIFA_SHG_1;
}
adcifa_configure_sequencer(adcifa, 0, &adcifa_sequence_opt,
adcifa_sequence_conversion_opt);
adcifa_start_sequencer(adcifa, 0);
#else
volatile avr32_adc_t *adc = &RTOUCH_ADC;
/* disable all touch channels */
adc->chdr = RTOUCH_ADC_XL_CHANNEL | RTOUCH_ADC_YL_CHANNEL
| RTOUCH_ADC_XH_CHANNEL | RTOUCH_ADC_YH_CHANNEL;
/* enable current touch channel */
adc->cher = channel;
adc_start(adc);
#endif
}
void adcifa_calibrate_offset(volatile avr32_adcifa_t *adcifa,
adcifa_opt_t *p_adcifa_opt, uint32_t pb_hz){
/* Sequencer Configuration */
adcifa_sequencer_opt_t adcifa_sequence_opt;
adcifa_sequencer_conversion_opt_t
adcifa_sequence_conversion_opt[CALIBRATION_ADCIFA_NUMBER_OF_SEQUENCE];
/* Configure the ADC */
p_adcifa_opt->sample_and_hold_disable = true;
p_adcifa_opt->single_sequencer_mode = true;
p_adcifa_opt->free_running_mode_enable = false;
p_adcifa_opt->sleep_mode_enable = false;
p_adcifa_opt->mux_settle_more_time = false;
/* Clear offset calibration value before starting calibration */
p_adcifa_opt->offset_calibration_value = 0;
/* Configure ADCIFA core */
adcifa_configure(&AVR32_ADCIFA, p_adcifa_opt, pb_hz);
/* ADCIFA sequencer 0 configuration structure*/
adcifa_sequence_opt.convnb =
CALIBRATION_ADCIFA_NUMBER_OF_SEQUENCE;
adcifa_sequence_opt.resolution =
ADCIFA_SRES_12B;
adcifa_sequence_opt.trigger_selection =
ADCIFA_TRGSEL_SOFT;
adcifa_sequence_opt.start_of_conversion =
ADCIFA_SOCB_ALLSEQ;
adcifa_sequence_opt.sh_mode =
ADCIFA_SH_MODE_OVERSAMP;
adcifa_sequence_opt.half_word_adjustment =
ADCIFA_HWLA_NOADJ;
adcifa_sequence_opt.software_acknowledge =
ADCIFA_SA_NO_EOS_SOFTACK;
/* ADCIFA conversions for sequencer 0*/
for (uint8_t i=0; i<CALIBRATION_ADCIFA_NUMBER_OF_SEQUENCE; i++){
adcifa_sequence_conversion_opt[i].channel_p = AVR32_ADCIFA_INP_GNDANA;
adcifa_sequence_conversion_opt[i].channel_n = AVR32_ADCIFA_INN_GNDANA;
adcifa_sequence_conversion_opt[i].gain = ADCIFA_SHG_1;
}
/* Configure ADCIFA sequencer 0 */
adcifa_configure_sequencer(&AVR32_ADCIFA, 0, &adcifa_sequence_opt,
adcifa_sequence_conversion_opt);
/* Start ADCIFA sequencer 0 */
adcifa_start_sequencer(&AVR32_ADCIFA, 0);
/* Wait end of ADCIFA sequencer 0*/
while(!ADCIFA_is_eos_sequencer_0());
/* The last converted value is the offset value */
p_adcifa_opt->offset_calibration_value =
- ADCIFA_read_resx_sequencer_0(CALIBRATION_ADCIFA_NUMBER_OF_SEQUENCE-1);
}
///< starts sampling, captures one buffer length and then stops
void adc_int_start_sampling(int32_t length, int32_t samplingrate, int32_t set_oversampling, int32_t set_oversampling_divider, bool continuous)
{
///< Configure ADCIFA sequencer 0
adcifa_sequence_opt.convnb = sequencer_item_count;
adcifa_configure_sequencer(adcifa, 0, (adcifa_sequencer_opt_t *)&adcifa_sequence_opt, (adcifa_sequencer_conversion_opt_t *)&adcifa_sequencer0_conversion_opt);
oversampling = set_oversampling;
oversampling_divider = set_oversampling_divider;
volatile int32_t period_us = adc_config_options.frequency / (samplingrate*oversampling);
oversampling_counter = 0;
sample_counter = -10;
number_of_samples = length;
continuous_mode = continuous;
channel_count = sequencer_item_count;
adcifa_enable_interrupt(adcifa, ADC_INT_SEOS0);
//adcifa_enable_interrupt(adcifa, ADC_INT_SEOS1);
adcifa_start_itimer(adcifa, period_us);
}
/** \brief Main function to initialize the system and loop to display ADC values
*
*/
int main( void )
{
int16_t adc_values[EXAMPLE_ADCIFA_NUMBER_OF_SEQUENCE];
adcifa_sequencer_opt_t adcifa_sequence_opt ;
adcifa_sequencer_conversion_opt_t
adcifa_sequence_conversion_opt[EXAMPLE_ADCIFA_NUMBER_OF_SEQUENCE];
adcifa_opt_t adc_config_t ;
adcifa_window_monitor_opt_t adcifa_window_monitor_0_opt;
adcifa_window_monitor_opt_t adcifa_window_monitor_1_opt;
/* GPIO pin/adc-function map. */
const gpio_map_t ADCIFA_GPIO_MAP = {
{AVR32_ADCREF0_PIN, AVR32_ADCREF0_FUNCTION},
{AVR32_ADCREFP_PIN, AVR32_ADCREFP_FUNCTION},
{AVR32_ADCREFN_PIN, AVR32_ADCREFN_FUNCTION},
{EXAMPLE_ADC_POTENTIOMETER_PIN, EXAMPLE_ADC_POTENTIOMETER_FUNCTION},
{EXAMPLE_ADC_MIC_PIN, EXAMPLE_ADC_MIC_FUNCTION}
};
/* Init system clocks */
sysclk_init();
/* Init debug serial line */
init_dbg_rs232(sysclk_get_cpu_hz());
/* Assign and enable GPIO pins to the ADC function. */
gpio_enable_module(ADCIFA_GPIO_MAP, sizeof(ADCIFA_GPIO_MAP) /
sizeof(ADCIFA_GPIO_MAP[0]));
/* Configure the ADC for the application*/
adc_config_t.frequency = 1000000;
adc_config_t.reference_source = ADCIFA_ADCREF0;
adc_config_t.sample_and_hold_disable = false;
adc_config_t.single_sequencer_mode = false;
adc_config_t.free_running_mode_enable = false;
adc_config_t.sleep_mode_enable = false;
adc_config_t.mux_settle_more_time = false;
/* Get ADCIFA Factory Configuration */
adcifa_get_calibration_data(&AVR32_ADCIFA, &adc_config_t);
/* Calibrate offset first*/
adcifa_calibrate_offset(&AVR32_ADCIFA, &adc_config_t, sysclk_get_cpu_hz());
/* Configure ADCIFA core */
adcifa_configure(&AVR32_ADCIFA, &adc_config_t, sysclk_get_cpu_hz());
/* ADCIFA sequencer 0 configuration structure*/
adcifa_sequence_opt.convnb = EXAMPLE_ADCIFA_NUMBER_OF_SEQUENCE;
adcifa_sequence_opt.resolution = ADCIFA_SRES_12B;
adcifa_sequence_opt.trigger_selection = ADCIFA_TRGSEL_SOFT;
adcifa_sequence_opt.start_of_conversion = ADCIFA_SOCB_ALLSEQ;
adcifa_sequence_opt.sh_mode = ADCIFA_SH_MODE_OVERSAMP;
adcifa_sequence_opt.half_word_adjustment= ADCIFA_HWLA_NOADJ;
adcifa_sequence_opt.software_acknowledge= ADCIFA_SA_NO_EOS_SOFTACK;
/* ADCIFA conversions for sequencer 0*/
adcifa_sequence_conversion_opt[0].channel_p = EXAMPLE_ADC_POTENTIOMETER_INP;
adcifa_sequence_conversion_opt[0].channel_n = EXAMPLE_ADC_POTENTIOMETER_INN;
adcifa_sequence_conversion_opt[0].gain = ADCIFA_SHG_1;
adcifa_sequence_conversion_opt[1].channel_p = EXAMPLE_ADC_MIC_INP;
adcifa_sequence_conversion_opt[1].channel_n = EXAMPLE_ADC_MIC_INN;
adcifa_sequence_conversion_opt[1].gain = ADCIFA_SHG_8;
/* Window Monitor 0 Configuration */
/* Window Mode 2 -> Active (If Result Register > Low Threshold) */
adcifa_window_monitor_0_opt.mode = ADCIFA_WINDOW_MODE_ABOVE;
/* First channel in the configured sequence */
adcifa_window_monitor_0_opt.source_index = 0;
/* Low Threshold Equivalent ADC counts */
adcifa_window_monitor_0_opt.low_threshold = 0x1FF;
/* High Threshold Equivalent ADC counts */
adcifa_window_monitor_0_opt.high_threshold = 0;
/* Window Monitor 1 Configuration */
/* Window Mode 2 -> Active (If Result Register > Low Threshold) */
adcifa_window_monitor_1_opt.mode = ADCIFA_WINDOW_MODE_ABOVE;
/* Second channel in the configured sequence */
adcifa_window_monitor_1_opt.source_index = 1;
/* Low Threshold Equivalent ADC counts */
adcifa_window_monitor_1_opt.low_threshold = 0x1FF;
/* High Threshold Equivalent ADC counts */
adcifa_window_monitor_1_opt.high_threshold = 0;
/*
* Initialize the interrupt vectors
* Note: This function adds nothing for IAR as the interrupts are
* handled by the IAR compiler itself. It provides an abstraction
* between GCC & IAR compiler to use interrupts.
* Refer function implementation in interrupt_avr32.h
*/
irq_initialize_vectors();
/*
* Register the ADCIFA interrupt handler
* Note: This function adds nothing for IAR as the interrupts are
* handled by the IAR compiler itself. It provides an abstraction
* between GCC & IAR compiler to use interrupts.
* Refer function implementation in interrupt_avr32.h
*/
irq_register_handler(&ADCIFA_interrupt_handler, AVR32_ADCIFA_WINDOW_IRQ,
ADC_INTERRUPT_PRIORITY);
/* Enable global Interrupts */
Enable_global_interrupt();
/* Configure ADCIFA Window Monitor 0 */
adcifa_configure_window_monitor(&AVR32_ADCIFA, 0 ,
&adcifa_window_monitor_0_opt);
/* Configure ADCIFA Window Monitor 1 */
adcifa_configure_window_monitor(&AVR32_ADCIFA, 1 ,
&adcifa_window_monitor_1_opt);
/* Enable the Window Monitor 0 Interrupt */
adcifa_enable_interrupt(&AVR32_ADCIFA,AVR32_ADCIFA_IDR_WM0_MASK);
/* Enable the Window Monitor 1 Interrupt */
adcifa_enable_interrupt(&AVR32_ADCIFA,AVR32_ADCIFA_IDR_WM1_MASK);
/* Configure ADCIFA sequencer 0 */
adcifa_configure_sequencer(&AVR32_ADCIFA, 0, &adcifa_sequence_opt,
adcifa_sequence_conversion_opt);
/* Start ADCIFA sequencer 0 */
adcifa_start_sequencer(&AVR32_ADCIFA, 0);
while (true) {
/* Get Values from sequencer 0 */
if (adcifa_get_values_from_sequencer(&AVR32_ADCIFA, 0,
&adcifa_sequence_opt, adc_values) == ADCIFA_STATUS_COMPLETED) {
/* Display values to user */
/* Display header */
print_dbg("\x1B[2J\x1B[H\r\nADCIFA Example\r\n");
print_dbg("HEX Value for Channel potentiometer: 0x");
print_dbg_hex(adc_values[0]);
print_dbg("\r\n");
if(window1) {
/* Out of Range -> Action */
print_dbg(" Window 1 : Out of Range\r\n");
window1=false;
adcifa_enable_interrupt(&AVR32_ADCIFA,AVR32_ADCIFA_IDR_WM0_MASK);
} else {
print_dbg(" Window 1 : Inside Range\r\n");
}
print_dbg("HEX Value for Channel microphone: 0x");
print_dbg_hex(~adc_values[1]);
print_dbg("\r\n");
if(window2) {
/* Out of Range -> Action */
print_dbg(" Window 2 : Out of Range\r\n");
window2=false;
adcifa_enable_interrupt(&AVR32_ADCIFA,AVR32_ADCIFA_IDR_WM1_MASK);
} else {
print_dbg(" Window 2 : Inside Range\r\n");
}
/*
* Clear end-of-sequence for sequencer 0,
* ready for next conversion.
*/
ADCIFA_clear_eos_sequencer_0();
/* Start new ADCIFA sequencer 0 */
adcifa_start_sequencer(&AVR32_ADCIFA, 0);
}
/* Slow down display of converted values */
delay_ms(100);
}
}
