//------------------------------------------------------------------------
tresult PLUGIN_API AGainSimple::setBusArrangements (SpeakerArrangement* inputs, int32 numIns, SpeakerArrangement* outputs, int32 numOuts)
{
if (numIns == 1 && numOuts == 1)
{
if (inputs[0] == SpeakerArr::kMono && outputs[0] == SpeakerArr::kMono)
{
AudioBus* bus = FCast<AudioBus> (audioInputs.at (0));
if (bus)
{
if (bus->getArrangement () != SpeakerArr::kMono)
{
removeAudioBusses ();
addAudioInput (USTRING ("Mono In"), SpeakerArr::kMono);
addAudioOutput (USTRING ("Mono Out"), SpeakerArr::kMono);
}
return kResultOk;
}
}
else
{
AudioBus* bus = FCast<AudioBus> (audioInputs.at (0));
if (bus)
{
if (bus->getArrangement () != SpeakerArr::kStereo)
{
removeAudioBusses ();
addAudioInput (USTRING ("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING ("Stereo Out"), SpeakerArr::kStereo);
}
return kResultOk;
}
}
}
return kResultFalse;
}
tresult PLUGIN_API IPlugVST3Plugin::setBusArrangements(SpeakerArrangement* inputs, int32 numIns, SpeakerArrangement* outputs, int32 numOuts)
{
TRACE;
// disconnect all io pins, they will be reconnected in process
SetInputChannelConnections(0, NInChannels(), false);
SetOutputChannelConnections(0, NOutChannels(), false);
int32 reqNumInputChannels = SpeakerArr::getChannelCount(inputs[0]); //requested # input channels
int32 reqNumOutputChannels = SpeakerArr::getChannelCount(outputs[0]);//requested # output channels
// legal io doesn't consider sidechain inputs
if (!LegalIO(reqNumInputChannels, reqNumOutputChannels))
{
return kResultFalse;
}
// handle input
AudioBus* bus = FCast<AudioBus>(audioInputs.at(0));
// if existing input bus has a different number of channels to the input bus being connected
if (bus && SpeakerArr::getChannelCount(bus->getArrangement()) != reqNumInputChannels)
{
audioInputs.remove(bus);
addAudioInput(USTRING("Input"), getSpeakerArrForChans(reqNumInputChannels));
}
// handle output
bus = FCast<AudioBus>(audioOutputs.at(0));
// if existing output bus has a different number of channels to the output bus being connected
if (bus && SpeakerArr::getChannelCount(bus->getArrangement()) != reqNumOutputChannels)
{
audioOutputs.remove(bus);
addAudioOutput(USTRING("Output"), getSpeakerArrForChans(reqNumOutputChannels));
}
if (!mScChans && numIns == 1) // No sidechain, every thing OK
{
return kResultTrue;
}
if (mScChans && numIns == 2) // numIns = num Input BUSes
{
int32 reqNumSideChainChannels = SpeakerArr::getChannelCount(inputs[1]); //requested # sidechain input channels
bus = FCast<AudioBus>(audioInputs.at(1));
if (bus && SpeakerArr::getChannelCount(bus->getArrangement()) != reqNumSideChainChannels)
{
audioInputs.remove(bus);
addAudioInput(USTRING("Sidechain Input"), getSpeakerArrForChans(reqNumSideChainChannels), kAux, 0); // either mono or stereo
}
return kResultTrue;
}
return kResultFalse;
}
//------------------------------------------------------------------------
tresult PLUGIN_API AGain::setBusArrangements (SpeakerArrangement* inputs, int32 numIns, SpeakerArrangement* outputs, int32 numOuts)
{
if (numIns == 1 && numOuts == 1)
{
// the host wants Mono => Mono (or 1 channel -> 1 channel)
if (SpeakerArr::getChannelCount (inputs[0]) == 1 && SpeakerArr::getChannelCount (outputs[0]) == 1)
{
AudioBus* bus = FCast<AudioBus> (audioInputs.at (0));
if (bus)
{
// check if we are Mono => Mono, if not we need to recreate the buses
if (bus->getArrangement () != inputs[0])
{
removeAudioBusses ();
addAudioInput (STR16 ("Mono In"), inputs[0]);
addAudioOutput (STR16 ("Mono Out"), inputs[0]);
}
return kResultOk;
}
}
// the host wants something else than Mono => Mono, in this case we are always Stereo => Stereo
else
{
AudioBus* bus = FCast<AudioBus> (audioInputs.at (0));
if (bus)
{
tresult result = kResultFalse;
// the host wants 2->2 (could be LsRs -> LsRs)
if (SpeakerArr::getChannelCount (inputs[0]) == 2 && SpeakerArr::getChannelCount (outputs[0]) == 2)
{
removeAudioBusses ();
addAudioInput (STR16 ("Stereo In"), inputs[0]);
addAudioOutput (STR16 ("Stereo Out"), outputs[0]);
result = kResultTrue;
}
// the host want something different than 1->1 or 2->2 : in this case we want stereo
else if (bus->getArrangement () != SpeakerArr::kStereo)
{
removeAudioBusses ();
addAudioInput (STR16 ("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (STR16 ("Stereo Out"), SpeakerArr::kStereo);
result = kResultFalse;
}
return result;
}
}
}
return kResultFalse;
}
//------------------------------------------------------------------------
tresult PLUGIN_API AGain::initialize (FUnknown* context)
{
//---always initialize the parent-------
tresult result = AudioEffect::initialize (context);
wp = 0;
rp = 0;
if(!server) {
server = lo_server_thread_new("10001", lo_err_handler);
//lo_method tmp = lo_server_thread_add_method(server,"/dummy",NULL,lo_method_handler,this);
int res = lo_server_thread_start(server);
}
// if everything Ok, continue
if (result != kResultOk)
{
return result;
}
//---create Audio In/Out busses------
// we want a stereo Input and a Stereo Output
addAudioInput (STR16 ("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (STR16 ("Stereo Out"), SpeakerArr::kStereo);
//---create Event In/Out busses (1 bus with only 1 channel)------
addEventInput (STR16 ("Event In"), 1);
return kResultOk;
}
//-----------------------------------------------------------------------------
tresult PLUGIN_API MultiBandProcessor::initialize (FUnknown* context)
{
tresult res = BaseProcessor::initialize (context);
if (res == kResultTrue)
{
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo Out"), SpeakerArr::kStereo);
params[0] = 1.00; //Listen: L/M/H/out
params[1] = 0.103; //xover1
params[2] = 0.878; //xover2
params[3] = 0.54; //L drive (1)
params[4] = 0.00; //M drive
params[5] = 0.60; //H drive
params[6] = 0.45; //L trim (2)
params[7] = 0.50; //M trim
params[8] = 0.50; //H trim
params[9] = 0.22; //attack (3)
params[10] = 0.602; //release (4)
params[11] = 0.55; //width
params[12] = 0.; //MS swap
fb1 = fb2 = fb3 = 0.f;
gain1 = gain2 = gain3 = 0.f;
recalculate ();
}
return res;
}
//-----------------------------------------------------------------------------
tresult PLUGIN_API AmbienceProcessor::initialize (FUnknown* context)
{
tresult res = BaseProcessor::initialize (context);
if (res == kResultTrue)
{
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo Out"), SpeakerArr::kStereo);
//inits here!
params[0] = 0.7; //size
params[1] = 0.7; //hf
params[2] = 0.9; //mix
params[3] = 0.5; //output
buf1 = new float[1024];
buf2 = new float[1024];
buf3 = new float[1024];
buf4 = new float[1024];
fil = 0.0f;
den = pos = 0;
recalculate ();
}
return res;
}
tresult PLUGIN_API Processor::initialize(FUnknown* context) {
tresult result = AudioEffect::initialize(context);
if (result == kResultTrue)
{
addAudioInput(STR16("AudioInput"), SpeakerArr::kStereo);
addAudioOutput(STR16("AudioOutput"), SpeakerArr::kStereo);
}
return result;
}
//-----------------------------------------------------------------------------
tresult PLUGIN_API OverdriveProcessor::initialize (FUnknown* context)
{
tresult res = BaseProcessor::initialize (context);
if (res == kResultTrue)
{
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo Out"), SpeakerArr::kStereo);
params[0] = 0.0f;
params[1] = 0.0f;
params[2] = 0.5f;
recalculate ();
}
return res;
}
//------------------------------------------------------------------------
tresult PLUGIN_API AGainSimple::initialize (FUnknown* context)
{
tresult result = SingleComponentEffect::initialize (context);
if (result != kResultOk)
return result;
//---create Audio In/Out buses------
// we want a stereo Input and a Stereo Output
addAudioInput (USTRING ("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING ("Stereo Out"), SpeakerArr::kStereo);
//---create MIDI In/Out buses (1 bus with only 1 channel)------
addEventInput (USTRING ("MIDI In"), 1);
//---Create Parameters------------
//---Gain parameter--
GainParameter* gainParam = new GainParameter (ParameterInfo::kCanAutomate, kGainId);
parameters.addParameter (gainParam);
//---VuMeter parameter---
int32 stepCount = 0;
ParamValue defaultVal = 0;
int32 flags = ParameterInfo::kIsReadOnly;
int32 tag = kVuPPMId;
parameters.addParameter (USTRING ("VuPPM"), 0, stepCount, defaultVal, flags, tag);
//---Bypass parameter---
stepCount = 1;
defaultVal = 0;
flags = ParameterInfo::kCanAutomate|ParameterInfo::kIsBypass;
tag = kBypassId;
parameters.addParameter (USTRING ("Bypass"), 0, stepCount, defaultVal, flags, tag);
//---Custom state init------------
UString str (defaultMessageText, 128);
str.fromAscii ("Hello World!");
return result;
}
//------------------------------------------------------------------------
tresult PLUGIN_API AGain::initialize (FUnknown* context)
{
//---always initialize the parent-------
tresult result = AudioEffect::initialize (context);
// if everything Ok, continue
if (result != kResultOk)
{
return result;
}
//---create Audio In/Out buses------
// we want a stereo Input and a Stereo Output
addAudioInput (STR16 ("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (STR16 ("Stereo Out"), SpeakerArr::kStereo);
//---create Event In/Out buses (1 bus with only 1 channel)------
addEventInput (STR16 ("Event In"), 1);
return kResultOk;
}
//-----------------------------------------------------------------------------
tresult PLUGIN_API RingModProcessor::initialize (FUnknown* context)
{
tresult res = BaseProcessor::initialize (context);
if (res == kResultTrue)
{
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo Out"), SpeakerArr::kStereo);
params[0] = (float)0.0625; //1kHz
params[1] = (float)0.0;
params[2] = (float)0.0;
fPhi = 0.0;
twoPi = (float)6.2831853;
fprev = 0.f;
recalculate ();
}
return res;
}
//-----------------------------------------------------------------------------
tresult PLUGIN_API TestToneProcessor::initialize (FUnknown* context)
{
tresult res = BaseProcessor::initialize (context);
if (res == kResultTrue)
{
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo Out"), SpeakerArr::kStereo);
params[0] = 0.47f; //mode
params[1] = 0.71f; //level dB
params[2] = 0.50f; //pan dB
params[3] = 0.57f; //freq1 B
params[4] = 0.50f; //freq2 Hz
params[5] = 0.00f; //thru dB
params[6] = 0.30f; //sweep ms
params[7] = 1.00f; //cal dBFS
recalculate ();
}
return res;
}
//-----------------------------------------------------------------------------
tresult PLUGIN_API DynamicsProcessor::initialize (FUnknown* context)
{
tresult res = BaseProcessor::initialize (context);
if (res == kResultTrue)
{
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo Out"), SpeakerArr::kStereo);
params[0] = 0.60; //thresh ///Note : special version for ardislarge
params[1] = 0.40; //ratio
params[2] = 0.10; //level ///was 0.6
params[3] = 0.18; //attack
params[4] = 0.55; //release
params[5] = 1.00; //Limiter
params[6] = 0.00; //gate thresh
params[7] = 0.10; //gate attack
params[8] = 0.50; //gate decay
params[9] = 1.00; //fx mix
recalculate ();
}
return res;
}
//-----------------------------------------------------------------------------
tresult PLUGIN_API RezFilterProcessor::initialize (FUnknown* context)
{
tresult res = BaseProcessor::initialize (context);
if (res == kResultTrue)
{
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo Out"), SpeakerArr::kStereo);
params[0] = 0.33f; //f
params[1] = 0.70f; //q
params[2] = 0.50f; //a
params[3] = 0.85f; //fenv
params[4] = 0.00f; //att
params[5] = 0.50f; //rel
params[6] = 0.70f; //lfo
params[7] = 0.40f; //rate
params[8] = 0.00f; //trigger
params[9] = 0.75f; //max freq
recalculate ();
}
return res;
}
tresult PLUGIN_API TripleFProcessor::initialize(FUnknown *context)
{
tresult initbase = AudioEffect::initialize(context);
if(initbase == kResultTrue)
{
if(removeAllBusses() != kResultTrue)
return kResultFalse;
addAudioInput (USTRING("Stereo In"), SpeakerArr::kStereo);
addAudioOutput (USTRING("Stereo out"), SpeakerArr::kStereo);
try
{
m_env = new OpenCLEnvironment(CL_DEVICE_TYPE_GPU);
m_compiler = new Compiler(*m_env, path("%FFF%/cl").getPath());
m_compiler->build();
WaveReader<Sample> hReader("h.wav");
UInt channelCount = hReader.getChannelCount();
UInt sampleCount = hReader.getSampleCount();
m_ssize = sampleCount - 1;
ComputingData<Sample> cd(sampleCount);
DeviceProperties devprops(m_env->getDevice());
Mapper map(cd, devprops, 0);
m_x = new mcf::hmcp;
m_y = new mcf::hmcp;
mcf::multichannel b, a;
mcf::create(b, *m_env, CL_MEM_READ_ONLY, channelCount, fff_POW2(map.getLb2N()));
mcf::create(a, *m_env, CL_MEM_READ_ONLY, channelCount, fff_POW2(map.getLb2N()));
for(UInt ch = 0; ch < channelCount; ++ch)
a.host->getRawReal(ch)[0] = (Sample)20.f;
mcf::create(m_H, *m_env, CL_MEM_READ_WRITE, channelCount, fff_POW2(map.getLb2N()));
hReader.readFile(*(b.host));
TransferFunction<Sample> tra(*m_compiler, *b, *a, *m_H);
tra.invokeAndWait();
}
catch(...)
{
initbase = kResultFalse;
}
}
return
initbase;
}
tresult PLUGIN_API IPlugVST3Plugin::initialize (FUnknown* context)
{
TRACE;
tresult result = SingleComponentEffect::initialize(context);
String128 tmpStringBuf;
char hostNameCString[128];
FUnknownPtr<IHostApplication>app(context);
if (app)
{
app->getName(tmpStringBuf);
Steinberg::UString(tmpStringBuf, 128).toAscii(hostNameCString, 128);
SetHost(hostNameCString, 0); // Can't get version in VST3
}
if (result == kResultOk)
{
int maxInputs = getSpeakerArrForChans(NInChannels()-mScChans);
if(maxInputs < 0) maxInputs = 0;
// add io buses with the maximum i/o to start with
if (maxInputs)
{
Steinberg::UString(tmpStringBuf, 128).fromAscii(GetInputBusLabel(0)->Get(), 128);
addAudioInput(tmpStringBuf, maxInputs);
}
if(!mIsInst) // if effect, just add one output bus with max chan count
{
Steinberg::UString(tmpStringBuf, 128).fromAscii(GetOutputBusLabel(0)->Get(), 128);
addAudioOutput(tmpStringBuf, getSpeakerArrForChans(NOutChannels()) );
}
else
{
for (int i = 0, busIdx = 0; i < NOutChannels(); i+=2, busIdx++)
{
Steinberg::UString(tmpStringBuf, 128).fromAscii(GetOutputBusLabel(busIdx)->Get(), 128);
addAudioOutput(tmpStringBuf, SpeakerArr::kStereo );
}
}
if (mScChans)
{
if (mScChans > 2) mScChans = 2;
Steinberg::UString(tmpStringBuf, 128).fromAscii(GetInputBusLabel(1)->Get(), 128);
addAudioInput(tmpStringBuf, getSpeakerArrForChans(mScChans), kAux, 0);
}
if(DoesMIDI())
{
addEventInput (STR16("MIDI Input"), 1);
//addEventOutput(STR16("MIDI Output"), 1);
}
if (NPresets())
{
parameters.addParameter(new Parameter(STR16("Preset"),
kPresetParam,
STR16(""),
0,
NPresets(),
ParameterInfo::kIsProgramChange));
}
if(!mIsInst)
{
StringListParameter * bypass = new StringListParameter(STR16("Bypass"),
kBypassParam,
0,
ParameterInfo::kCanAutomate | ParameterInfo::kIsBypass | ParameterInfo::kIsList);
bypass->appendString(STR16("off"));
bypass->appendString(STR16("on"));
parameters.addParameter(bypass);
}
for (int i=0; i<NParams(); i++)
{
IParam *p = GetParam(i);
int32 flags = 0;
UnitID unitID = kRootUnitId;
const char* paramGroupName = p->GetParamGroupForHost();
if (CSTR_NOT_EMPTY(paramGroupName))
{
for(int j = 0; j < mParamGroups.GetSize(); j++)
{
if(strcmp(paramGroupName, mParamGroups.Get(j)) == 0)
{
unitID = j+1;
}
}
if (unitID == kRootUnitId) // new unit, nothing found, so add it
{
mParamGroups.Add(paramGroupName);
unitID = mParamGroups.GetSize();
}
}
if (p->GetCanAutomate())
{
flags |= ParameterInfo::kCanAutomate;
}
switch (p->Type())
{
case IParam::kTypeDouble:
case IParam::kTypeInt:
{
Parameter* param = new RangeParameter( STR16(p->GetNameForHost()),
i,
STR16(p->GetLabelForHost()),
p->GetMin(),
p->GetMax(),
p->GetDefault(),
0, // continuous
flags,
unitID);
param->setPrecision (p->GetPrecision());
parameters.addParameter(param);
break;
}
case IParam::kTypeEnum:
case IParam::kTypeBool:
{
StringListParameter* param = new StringListParameter (STR16(p->GetNameForHost()),
i,
STR16(p->GetLabelForHost()),
flags | ParameterInfo::kIsList,
unitID);
int nDisplayTexts = p->GetNDisplayTexts();
assert(nDisplayTexts);
for (int j=0; j<nDisplayTexts; j++)
{
param->appendString(STR16(p->GetDisplayText(j)));
}
parameters.addParameter(param);
break;
}
default:
break;
}
}
}
OnHostIdentified();
RestorePreset(0);
return result;
}
tresult PLUGIN_API IPlugVST3::setBusArrangements(SpeakerArrangement* inputs, int32 numIns, SpeakerArrangement* outputs, int32 numOuts)
{
TRACE;
//inputs
AudioBus* bus = getAudioInput(0);
if (bus && bus->getArrangement() != inputs[0])
{
if (inputs[0] == SpeakerArr::kMono)
{
//re-create the busses..
audioInputs.remove(bus);
if (mScChans)
{
bus = getAudioInput(0);
if (bus && bus->getArrangement() != inputs[1]) //sidechain SpeakerArr:: must match the input SpeakerArr::
{
audioInputs.remove(bus);
}
}
addAudioInput(USTRING ("Mono In"), SpeakerArr::kMono);
addAudioInput(USTRING ("Mono Sidechain In"), SpeakerArr::kMono, kAux, 0);
//disconnect the unused pins, don't worry about sidechain yet - it will get done at process()
SetInputChannelConnections(1, NInChannels(), false);
mSideChainIsConnected = false;
}
}
//outputs
bus = getAudioOutput(0);
if (bus && bus->getArrangement() != outputs[0])
{
if (outputs[0] == SpeakerArr::kMono)
{
audioOutputs.remove(bus);
addAudioOutput(USTRING ("Mono Out"), SpeakerArr::kMono);
//disconnect the unused pin
SetOutputChannelConnections(1, NOutChannels(), false);
}
}
if (mScChans)
{
if (getAudioInput(0)->getArrangement() == inputs[0] &&
getAudioOutput(0)->getArrangement() == outputs[0] &&
getAudioInput(1)->getArrangement() == inputs[1])
return kResultOk;
}
else
{
if (getAudioInput(0)->getArrangement() == inputs[0] &&
getAudioOutput(0)->getArrangement() == outputs[0])
return kResultOk;
}
return kResultFalse;
}
tresult PLUGIN_API IPlugVST3::initialize (FUnknown* context)
{
TRACE;
tresult result = SingleComponentEffect::initialize (context);
if (result == kResultOk)
{
addAudioInput (STR16("Audio Input"), getSpeakerArrForChans(NInChannels()) );
addAudioOutput (STR16("Audio Output"), getSpeakerArrForChans(NOutChannels()) );
if (mScChans == 1)
addAudioInput(STR16("Sidechain Input"), SpeakerArr::kMono, kAux, 0);
else if (mScChans >= 2)
{
mScChans = 2;
addAudioInput(STR16("Sidechain Input"), SpeakerArr::kStereo, kAux, 0);
}
if(mDoesMidi) {
addEventInput (STR16("MIDI In"), 1);
addEventOutput(STR16("MIDI Out"), 1);
}
for (int i=0;i<NParams();i++)
{
IParam *p = GetParam(i);
int32 flags = 0;
if (p->GetCanAutomate()) {
flags |= ParameterInfo::kCanAutomate;
}
switch (p->Type()) {
case IParam::kTypeDouble:
case IParam::kTypeInt:
{
Parameter* param = new RangeParameter ( STR16(p->GetNameForHost()),
i,
STR16(p->GetLabelForHost()),
p->GetMin(),
p->GetMax(),
p->GetDefault(),
p->GetStep(),
flags);
param->setPrecision (p->GetPrecision());
parameters.addParameter (param);
break;
}
case IParam::kTypeEnum:
case IParam::kTypeBool:
{
StringListParameter* param = new StringListParameter (STR16(p->GetNameForHost()),
i,
STR16(p->GetLabelForHost()),
flags | ParameterInfo::kIsList);
int nDisplayTexts = p->GetNDisplayTexts();
assert(nDisplayTexts);
for (int j=0; j<nDisplayTexts; j++)
{
param->appendString(STR16(p->GetDisplayText(j)));
}
parameters.addParameter (param);
break;
}
default:
break;
}
}
}
return result;
}