Beispiel #1
0
static int
simple_pre_config(apr_pool_t * pconf, apr_pool_t * plog, apr_pool_t * ptemp)
{
    int run_debug;
    apr_status_t rv;
    simple_core_t *sc;

    /* this is our first 'real' entry point, so setup everything here. */
    rv = simple_core_init_once();

    if (rv) {
        ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL, APLOGNO(00257)
                     "simple_core_init_once: Fatal Error Encountered");
        return HTTP_INTERNAL_SERVER_ERROR;
    }

    sc = simple_core_get();

    sc->restart_num++;

    run_debug = ap_exists_config_define("DEBUG");

    if (run_debug) {
        sc->run_foreground = 1;
        sc->run_single_process = 1;
    }
    else {
        sc->run_foreground = ap_exists_config_define("FOREGROUND");
    }

    if (sc->restart_num == 2) {

        if (sc->run_foreground) {
            rv = apr_proc_detach(APR_PROC_DETACH_FOREGROUND);
        }
        else {
            rv = apr_proc_detach(APR_PROC_DETACH_DAEMONIZE);
        }

        if (rv) {
            ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL, APLOGNO(00258)
                         "simple_pre_config: apr_proc_detach(%s) failed",
                         sc->run_foreground ? "FOREGROUND" : "DAEMONIZE");
            return HTTP_INTERNAL_SERVER_ERROR;
        }
    }

    return OK;
}
Beispiel #2
0
static int prefork_pre_config(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp)
{
    static int restart_num = 0;
    int no_detach, debug, foreground;
    apr_status_t rv;

    mpm_state = AP_MPMQ_STARTING;

    debug = ap_exists_config_define("DEBUG");

    if (debug) {
        foreground = one_process = 1;
        no_detach = 0;
    }
    else
    {
        no_detach = ap_exists_config_define("NO_DETACH");
        one_process = ap_exists_config_define("ONE_PROCESS");
        foreground = ap_exists_config_define("FOREGROUND");
    }

    /* sigh, want this only the second time around */
    if (restart_num++ == 1) {
	is_graceful = 0;

        if (!one_process && !foreground) {
            rv = apr_proc_detach(no_detach ? APR_PROC_DETACH_FOREGROUND
                                           : APR_PROC_DETACH_DAEMONIZE);
            if (rv != APR_SUCCESS) {
                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL,
                             "apr_proc_detach failed");
                return HTTP_INTERNAL_SERVER_ERROR;
            }
        }

	parent_pid = ap_my_pid = getpid();
    }

    unixd_pre_config(ptemp);
    ap_listen_pre_config();
    ap_daemons_to_start = DEFAULT_START_DAEMON;
    ap_daemons_min_free = DEFAULT_MIN_FREE_DAEMON;
    ap_daemons_max_free = DEFAULT_MAX_FREE_DAEMON;
    ap_daemons_limit = server_limit;
    ap_pid_fname = DEFAULT_PIDLOG;
    ap_lock_fname = DEFAULT_LOCKFILE;
    ap_max_requests_per_child = DEFAULT_MAX_REQUESTS_PER_CHILD;
    ap_extended_status = 0;
#ifdef AP_MPM_WANT_SET_MAX_MEM_FREE
	ap_max_mem_free = APR_ALLOCATOR_MAX_FREE_UNLIMITED;
#endif

    apr_cpystrn(ap_coredump_dir, ap_server_root, sizeof(ap_coredump_dir));

    return OK;
}
Beispiel #3
0
int lua_apr_proc_detach(lua_State *L)
{
  apr_status_t status;
  int daemonize;

  luaL_checkany(L, 1);
  daemonize = lua_toboolean(L, 1);
  status = apr_proc_detach(daemonize);

  return push_status(L, status);
}
Beispiel #4
0
int main(int argc, const char* const argv[])
{
	int port, e;
	apr_int64_t signature;

	if (0 != (e = apr_initialize()))
	{
		gpsmon_fatalx(FLINE, e, "apr_initialize failed");
	}

	parse_command_line(argc, argv);

	port = atoi(opt.arg_port);
	if (!(0 < port && port < (1 << 16)))
		usage("Error: bad port number");

	if (1 != fscanf(stdin, "%" FMT64, &signature))
	{
		gpsmon_fatal(FLINE, "cannot read signature");
	}

	if (!opt.D)
	{
		if (0 != (e = apr_proc_detach(1)))
			gpsmon_fatalx(FLINE, e, "apr_proc_detach failed");
	}


	number_cpu_cores = (int)sysconf(_SC_NPROCESSORS_CONF);

	// sanity check this number a little
	if (number_cpu_cores < 1)
	{
		number_cpu_cores = 1;
	}

	cpu_cores_utilization_multiplier = 100.0 / (float)number_cpu_cores;

	gx_main(port, signature);
	return 0;
}
Beispiel #5
0
/*
 * main
 */
int main(int argc, const char * const argv[])
{
    apr_off_t max;
    apr_time_t current, repeat, delay, previous;
    apr_status_t status;
    apr_pool_t *pool, *instance;
    apr_getopt_t *o;
    apr_finfo_t info;
    int retries, isdaemon, limit_found, intelligent, dowork;
    char opt;
    const char *arg;
    char *proxypath, *path;

    interrupted = 0;
    repeat = 0;
    isdaemon = 0;
    dryrun = 0;
    limit_found = 0;
    max = 0;
    verbose = 0;
    realclean = 0;
    benice = 0;
    deldirs = 0;
    intelligent = 0;
    previous = 0; /* avoid compiler warning */
    proxypath = NULL;

    if (apr_app_initialize(&argc, &argv, NULL) != APR_SUCCESS) {
        return 1;
    }
    atexit(apr_terminate);

    if (argc) {
        shortname = apr_filepath_name_get(argv[0]);
    }

    if (apr_pool_create(&pool, NULL) != APR_SUCCESS) {
        return 1;
    }
    apr_pool_abort_set(oom, pool);
    apr_file_open_stderr(&errfile, pool);
    apr_signal(SIGINT, setterm);
    apr_signal(SIGTERM, setterm);

    apr_getopt_init(&o, pool, argc, argv);

    while (1) {
        status = apr_getopt(o, "iDnvrtd:l:L:p:", &opt, &arg);
        if (status == APR_EOF) {
            break;
        }
        else if (status != APR_SUCCESS) {
            usage();
        }
        else {
            switch (opt) {
            case 'i':
                if (intelligent) {
                    usage();
                }
                intelligent = 1;
                break;

            case 'D':
                if (dryrun) {
                    usage();
                }
                dryrun = 1;
                break;

            case 'n':
                if (benice) {
                    usage();
                }
                benice = 1;
                break;

            case 't':
                if (deldirs) {
                    usage();
                }
                deldirs = 1;
                break;

            case 'v':
                if (verbose) {
                    usage();
                }
                verbose = 1;
                break;

            case 'r':
                if (realclean) {
                    usage();
                }
                realclean = 1;
                deldirs = 1;
                break;

            case 'd':
                if (isdaemon) {
                    usage();
                }
                isdaemon = 1;
                repeat = apr_atoi64(arg);
                repeat *= SECS_PER_MIN;
                repeat *= APR_USEC_PER_SEC;
                break;

            case 'l':
                if (limit_found) {
                    usage();
                }
                limit_found = 1;

                do {
                    apr_status_t rv;
                    char *end;

                    rv = apr_strtoff(&max, arg, &end, 10);
                    if (rv == APR_SUCCESS) {
                        if ((*end == 'K' || *end == 'k') && !end[1]) {
                            max *= KBYTE;
                        }
                        else if ((*end == 'M' || *end == 'm') && !end[1]) {
                            max *= MBYTE;
                        }
                        else if ((*end == 'G' || *end == 'g') && !end[1]) {
                            max *= GBYTE;
                        }
                        else if (*end &&        /* neither empty nor [Bb] */
                                 ((*end != 'B' && *end != 'b') || end[1])) {
                            rv = APR_EGENERAL;
                        }
                    }
                    if (rv != APR_SUCCESS) {
                        apr_file_printf(errfile, "Invalid limit: %s"
                                                 APR_EOL_STR APR_EOL_STR, arg);
                        usage();
                    }
                } while(0);
                break;

            case 'p':
                if (proxypath) {
                    usage();
                }
                proxypath = apr_pstrdup(pool, arg);
                if (apr_filepath_set(proxypath, pool) != APR_SUCCESS) {
                    usage();
                }
                break;
            } /* switch */
        } /* else */
    } /* while */

    if (o->ind != argc) {
         usage();
    }

    if (isdaemon && (repeat <= 0 || verbose || realclean || dryrun)) {
         usage();
    }

    if (!isdaemon && intelligent) {
         usage();
    }

    if (!proxypath || max <= 0) {
         usage();
    }

    if (apr_filepath_get(&path, 0, pool) != APR_SUCCESS) {
        usage();
    }
    baselen = strlen(path);

#ifndef DEBUG
    if (isdaemon) {
        apr_file_close(errfile);
        apr_proc_detach(APR_PROC_DETACH_DAEMONIZE);
    }
#endif

    do {
        apr_pool_create(&instance, pool);

        now = apr_time_now();
        APR_RING_INIT(&root, _entry, link);
        delcount = 0;
        unsolicited = 0;
        dowork = 0;

        switch (intelligent) {
        case 0:
            dowork = 1;
            break;

        case 1:
            retries = STAT_ATTEMPTS;
            status = APR_SUCCESS;

            do {
                if (status != APR_SUCCESS) {
                    apr_sleep(STAT_DELAY);
                }
                status = apr_stat(&info, path, APR_FINFO_MTIME, instance);
            } while (status != APR_SUCCESS && !interrupted && --retries);

            if (status == APR_SUCCESS) {
                previous = info.mtime;
                intelligent = 2;
            }
            dowork = 1;
            break;

        case 2:
            retries = STAT_ATTEMPTS;
            status = APR_SUCCESS;

            do {
                if (status != APR_SUCCESS) {
                    apr_sleep(STAT_DELAY);
                }
                status = apr_stat(&info, path, APR_FINFO_MTIME, instance);
            } while (status != APR_SUCCESS && !interrupted && --retries);

            if (status == APR_SUCCESS) {
                if (previous != info.mtime) {
                    dowork = 1;
                }
                previous = info.mtime;
                break;
            }
            intelligent = 1;
            dowork = 1;
            break;
        }

        if (dowork && !interrupted) {
            if (!process_dir(path, instance) && !interrupted) {
                purge(path, instance, max);
            }
            else if (!isdaemon && !interrupted) {
                apr_file_printf(errfile, "An error occurred, cache cleaning "
                                         "aborted." APR_EOL_STR);
                return 1;
            }

            if (intelligent && !interrupted) {
                retries = STAT_ATTEMPTS;
                status = APR_SUCCESS;
                do {
                    if (status != APR_SUCCESS) {
                        apr_sleep(STAT_DELAY);
                    }
                    status = apr_stat(&info, path, APR_FINFO_MTIME, instance);
                } while (status != APR_SUCCESS && !interrupted && --retries);

                if (status == APR_SUCCESS) {
                    previous = info.mtime;
                    intelligent = 2;
                }
                else {
                    intelligent = 1;
                }
            }
        }

        apr_pool_destroy(instance);

        current = apr_time_now();
        if (current < now) {
            delay = repeat;
        }
        else if (current - now >= repeat) {
            delay = repeat;
        }
        else {
            delay = now + repeat - current;
        }

        /* we can't sleep the whole delay time here apiece as this is racy
         * with respect to interrupt delivery - think about what happens
         * if we have tested for an interrupt, then get scheduled
         * before the apr_sleep() call and while waiting for the cpu
         * we do get an interrupt
         */
        if (isdaemon) {
            while (delay && !interrupted) {
                if (delay > APR_USEC_PER_SEC) {
                    apr_sleep(APR_USEC_PER_SEC);
                    delay -= APR_USEC_PER_SEC;
                }
                else {
                    apr_sleep(delay);
                    delay = 0;
                }
            }
        }
    } while (isdaemon && !interrupted);

    if (!isdaemon && interrupted) {
        apr_file_printf(errfile, "Cache cleaning aborted due to user "
                                 "request." APR_EOL_STR);
        return 1;
    }

    return 0;
}
Beispiel #6
0
int main(int argc, const char * const argv[])
{
    apr_file_t *infd, *skwrapper;
    apr_sockaddr_t *skaddr;
    apr_getopt_t *gopt;
    apr_socket_t *skt;
    apr_pool_t *pool;
    apr_status_t rv;
    apr_proc_t proc;


    /* Command line arguments */
    int num_to_start = 1, port = 0;
    const char *interface = NULL;
    const char *command = NULL;

    apr_app_initialize(&argc, &argv, NULL);

    atexit(apr_terminate);

    apr_pool_create(&pool, NULL);

    rv = apr_getopt_init(&gopt, pool, argc, argv);
    if (rv) {
        return EXIT_FAILURE;
    }

    for (;;) {
        const char *arg;
        char opt;

        rv = apr_getopt(gopt, "c:p:i:N:", &opt, &arg);
        if (APR_STATUS_IS_EOF(rv)) {
            break;
        } else if (rv) {
            usage();
        } else {
            switch (opt) {
            case 'c':
                command = arg;
                break;

            case 'p':
                port = atoi(arg);
                if (! port) {
                    usage();
                }
                break;

            case 'i':
                interface = arg;
                break;

            case 'N':
                num_to_start = atoi(arg);
                if (! num_to_start) {
                    usage();
                }
                break;

            default:
                break;
            }
        }
    }

    if (! command || ! port) {
        usage();
    }

    rv = apr_sockaddr_info_get(&skaddr, interface, APR_UNSPEC, port, 0, pool);
    if (rv) {
        exit_error(rv, "apr_sockaddr_info_get");
    }

    rv = apr_socket_create(&skt, skaddr->family, SOCK_STREAM, APR_PROTO_TCP, pool);
    if (rv) {
        exit_error(rv, "apr_socket_create");
    }

    rv = apr_socket_bind(skt, skaddr);
    if (rv) {
        exit_error(rv, "apr_socket_bind");
    }

    rv = apr_socket_listen(skt, 1024);
    if (rv) {
        exit_error(rv, "apr_socket_listen");
    }

    rv = apr_proc_detach(APR_PROC_DETACH_DAEMONIZE);
    if (rv) {
        exit_error(rv, "apr_proc_detach");
    }

#if defined(WIN32) || defined(OS2) || defined(NETWARE)

#error "Please implement me."

#else

    while (--num_to_start >= 0) {
        rv = apr_proc_fork(&proc, pool);
        if (rv == APR_INCHILD) {
            apr_os_file_t oft = 0;
            apr_os_sock_t oskt;

            /* Ok, so we need a file that has file descriptor 0 (which
             * FastCGI wants), but points to our socket.  This isn't really
             * possible in APR, so we cheat a bit.  I have no idea how to
             * do this on a non-unix platform, so for now this is platform
             * specific.  Ick.
             *
             * Note that this has to happen post-detach, otherwise fd 0
             * gets closed during apr_proc_detach and it's all for nothing.
             *
             * Unfortunately, doing this post detach means we have no way
             * to let anyone know if there's a problem at this point :( */

            rv = apr_os_file_put(&infd, &oft, APR_READ | APR_WRITE, pool);
            if (rv) {
                exit(EXIT_FAILURE);
            }

            rv = apr_os_sock_get(&oskt, skt);
            if (rv) {
                exit(EXIT_FAILURE);
            }

            rv = apr_os_file_put(&skwrapper, &oskt, APR_READ | APR_WRITE,
                                 pool);
            if (rv) {
                exit(EXIT_FAILURE);
            }

            rv = apr_file_dup2(infd, skwrapper, pool);
            if (rv) {
                exit(EXIT_FAILURE);
            }

            /* XXX Can't use apr_proc_create because there's no way to get
             *     infd into the procattr without going through another dup2,
             *     which means by the time it gets to the fastcgi process it
             *     is no longer fd 0, so it doesn't work.  Sigh. */

            execl(command, command, NULL);

        } else if (rv == APR_INPARENT) {
            if (num_to_start == 0) {
                apr_socket_close(skt);
            }
        } else {
            exit_error(rv, "apr_proc_fork");
        }
    }

#endif

    return EXIT_SUCCESS;
}
Beispiel #7
0
/*
 * On success, leave *EXIT_CODE untouched and return SVN_NO_ERROR. On error,
 * either return an error to be displayed, or set *EXIT_CODE to non-zero and
 * return SVN_NO_ERROR.
 */
static svn_error_t *
sub_main(int *exit_code, int argc, const char *argv[], apr_pool_t *pool)
{
  enum run_mode run_mode = run_mode_unspecified;
  svn_boolean_t foreground = FALSE;
  apr_socket_t *sock;
  apr_sockaddr_t *sa;
  svn_error_t *err;
  apr_getopt_t *os;
  int opt;
  serve_params_t params;
  const char *arg;
  apr_status_t status;
#ifndef WIN32
  apr_proc_t proc;
#endif
  svn_boolean_t is_multi_threaded;
  enum connection_handling_mode handling_mode = CONNECTION_DEFAULT;
  svn_boolean_t cache_fulltexts = TRUE;
  svn_boolean_t cache_txdeltas = TRUE;
  svn_boolean_t cache_revprops = FALSE;
  svn_boolean_t use_block_read = FALSE;
  apr_uint16_t port = SVN_RA_SVN_PORT;
  const char *host = NULL;
  int family = APR_INET;
  apr_int32_t sockaddr_info_flags = 0;
#if APR_HAVE_IPV6
  svn_boolean_t prefer_v6 = FALSE;
#endif
  svn_boolean_t quiet = FALSE;
  svn_boolean_t is_version = FALSE;
  int mode_opt_count = 0;
  int handling_opt_count = 0;
  const char *config_filename = NULL;
  const char *pid_filename = NULL;
  const char *log_filename = NULL;
  svn_node_kind_t kind;
  apr_size_t min_thread_count = THREADPOOL_MIN_SIZE;
  apr_size_t max_thread_count = THREADPOOL_MAX_SIZE;
#ifdef SVN_HAVE_SASL
  SVN_ERR(cyrus_init(pool));
#endif

  /* Check library versions */
  SVN_ERR(check_lib_versions());

  /* Initialize the FS library. */
  SVN_ERR(svn_fs_initialize(pool));

  SVN_ERR(svn_cmdline__getopt_init(&os, argc, argv, pool));

  params.root = "/";
  params.tunnel = FALSE;
  params.tunnel_user = NULL;
  params.read_only = FALSE;
  params.base = NULL;
  params.cfg = NULL;
  params.compression_level = SVN_DELTA_COMPRESSION_LEVEL_DEFAULT;
  params.logger = NULL;
  params.config_pool = NULL;
  params.authz_pool = NULL;
  params.fs_config = NULL;
  params.vhost = FALSE;
  params.username_case = CASE_ASIS;
  params.memory_cache_size = (apr_uint64_t)-1;
  params.zero_copy_limit = 0;
  params.error_check_interval = 4096;

  while (1)
    {
      status = apr_getopt_long(os, svnserve__options, &opt, &arg);
      if (APR_STATUS_IS_EOF(status))
        break;
      if (status != APR_SUCCESS)
        {
          usage(argv[0], pool);
          *exit_code = EXIT_FAILURE;
          return SVN_NO_ERROR;
        }
      switch (opt)
        {
        case '6':
#if APR_HAVE_IPV6
          prefer_v6 = TRUE;
#endif
          /* ### Maybe error here if we don't have IPV6 support? */
          break;

        case 'h':
          help(pool);
          return SVN_NO_ERROR;

        case 'q':
          quiet = TRUE;
          break;

        case SVNSERVE_OPT_VERSION:
          is_version = TRUE;
          break;

        case 'd':
          if (run_mode != run_mode_daemon)
            {
              run_mode = run_mode_daemon;
              mode_opt_count++;
            }
          break;

        case SVNSERVE_OPT_FOREGROUND:
          foreground = TRUE;
          break;

        case SVNSERVE_OPT_SINGLE_CONN:
          handling_mode = connection_mode_single;
          handling_opt_count++;
          break;

        case 'i':
          if (run_mode != run_mode_inetd)
            {
              run_mode = run_mode_inetd;
              mode_opt_count++;
            }
          break;

        case SVNSERVE_OPT_LISTEN_PORT:
          {
            apr_uint64_t val;

            err = svn_cstring_strtoui64(&val, arg, 0, APR_UINT16_MAX, 10);
            if (err)
              return svn_error_createf(SVN_ERR_CL_ARG_PARSING_ERROR, err,
                                       _("Invalid port '%s'"), arg);
            port = (apr_uint16_t)val;
          }
          break;

        case SVNSERVE_OPT_LISTEN_HOST:
          host = arg;
          break;

        case 't':
          if (run_mode != run_mode_tunnel)
            {
              run_mode = run_mode_tunnel;
              mode_opt_count++;
            }
          break;

        case SVNSERVE_OPT_TUNNEL_USER:
          params.tunnel_user = arg;
          break;

        case 'X':
          if (run_mode != run_mode_listen_once)
            {
              run_mode = run_mode_listen_once;
              mode_opt_count++;
            }
          break;

        case 'r':
          SVN_ERR(svn_utf_cstring_to_utf8(&params.root, arg, pool));

          SVN_ERR(svn_io_check_resolved_path(params.root, &kind, pool));
          if (kind != svn_node_dir)
            {
              return svn_error_createf(SVN_ERR_ILLEGAL_TARGET, NULL,
                       _("Root path '%s' does not exist "
                         "or is not a directory"), params.root);
            }

          params.root = svn_dirent_internal_style(params.root, pool);
          SVN_ERR(svn_dirent_get_absolute(&params.root, params.root, pool));
          break;

        case 'R':
          params.read_only = TRUE;
          break;

        case 'T':
          handling_mode = connection_mode_thread;
          handling_opt_count++;
          break;

        case 'c':
          params.compression_level = atoi(arg);
          if (params.compression_level < SVN_DELTA_COMPRESSION_LEVEL_NONE)
            params.compression_level = SVN_DELTA_COMPRESSION_LEVEL_NONE;
          if (params.compression_level > SVN_DELTA_COMPRESSION_LEVEL_MAX)
            params.compression_level = SVN_DELTA_COMPRESSION_LEVEL_MAX;
          break;

        case 'M':
          params.memory_cache_size = 0x100000 * apr_strtoi64(arg, NULL, 0);
          break;

        case SVNSERVE_OPT_CACHE_TXDELTAS:
          cache_txdeltas = svn_tristate__from_word(arg) == svn_tristate_true;
          break;

        case SVNSERVE_OPT_CACHE_FULLTEXTS:
          cache_fulltexts = svn_tristate__from_word(arg) == svn_tristate_true;
          break;

        case SVNSERVE_OPT_CACHE_REVPROPS:
          cache_revprops = svn_tristate__from_word(arg) == svn_tristate_true;
          break;

        case SVNSERVE_OPT_BLOCK_READ:
          use_block_read = svn_tristate__from_word(arg) == svn_tristate_true;
          break;

        case SVNSERVE_OPT_CLIENT_SPEED:
          {
            apr_size_t bandwidth = (apr_size_t)apr_strtoi64(arg, NULL, 0);

            /* for slower clients, don't try anything fancy */
            if (bandwidth >= 1000)
              {
                /* block other clients for at most 1 ms (at full bandwidth).
                   Note that the send buffer is 16kB anyways. */
                params.zero_copy_limit = bandwidth * 120;

                /* check for aborted connections at the same rate */
                params.error_check_interval = bandwidth * 120;
              }
          }
          break;

        case SVNSERVE_OPT_MIN_THREADS:
          min_thread_count = (apr_size_t)apr_strtoi64(arg, NULL, 0);
          break;

        case SVNSERVE_OPT_MAX_THREADS:
          max_thread_count = (apr_size_t)apr_strtoi64(arg, NULL, 0);
          break;

#ifdef WIN32
        case SVNSERVE_OPT_SERVICE:
          if (run_mode != run_mode_service)
            {
              run_mode = run_mode_service;
              mode_opt_count++;
            }
          break;
#endif

        case SVNSERVE_OPT_CONFIG_FILE:
          SVN_ERR(svn_utf_cstring_to_utf8(&config_filename, arg, pool));
          config_filename = svn_dirent_internal_style(config_filename, pool);
          SVN_ERR(svn_dirent_get_absolute(&config_filename, config_filename,
                                          pool));
          break;

        case SVNSERVE_OPT_PID_FILE:
          SVN_ERR(svn_utf_cstring_to_utf8(&pid_filename, arg, pool));
          pid_filename = svn_dirent_internal_style(pid_filename, pool);
          SVN_ERR(svn_dirent_get_absolute(&pid_filename, pid_filename, pool));
          break;

         case SVNSERVE_OPT_VIRTUAL_HOST:
           params.vhost = TRUE;
           break;

         case SVNSERVE_OPT_LOG_FILE:
          SVN_ERR(svn_utf_cstring_to_utf8(&log_filename, arg, pool));
          log_filename = svn_dirent_internal_style(log_filename, pool);
          SVN_ERR(svn_dirent_get_absolute(&log_filename, log_filename, pool));
          break;

        }
    }

  if (is_version)
    {
      SVN_ERR(version(quiet, pool));
      return SVN_NO_ERROR;
    }

  if (os->ind != argc)
    {
      usage(argv[0], pool);
      *exit_code = EXIT_FAILURE;
      return SVN_NO_ERROR;
    }

  if (mode_opt_count != 1)
    {
      svn_error_clear(svn_cmdline_fputs(
#ifdef WIN32
                      _("You must specify exactly one of -d, -i, -t, "
                        "--service or -X.\n"),
#else
                      _("You must specify exactly one of -d, -i, -t or -X.\n"),
#endif
                       stderr, pool));
      usage(argv[0], pool);
      *exit_code = EXIT_FAILURE;
      return SVN_NO_ERROR;
    }

  if (handling_opt_count > 1)
    {
      svn_error_clear(svn_cmdline_fputs(
                      _("You may only specify one of -T or --single-thread\n"),
                      stderr, pool));
      usage(argv[0], pool);
      *exit_code = EXIT_FAILURE;
      return SVN_NO_ERROR;
    }

  /* construct object pools */
  is_multi_threaded = handling_mode == connection_mode_thread;
  params.fs_config = apr_hash_make(pool);
  svn_hash_sets(params.fs_config, SVN_FS_CONFIG_FSFS_CACHE_DELTAS,
                cache_txdeltas ? "1" :"0");
  svn_hash_sets(params.fs_config, SVN_FS_CONFIG_FSFS_CACHE_FULLTEXTS,
                cache_fulltexts ? "1" :"0");
  svn_hash_sets(params.fs_config, SVN_FS_CONFIG_FSFS_CACHE_REVPROPS,
                cache_revprops ? "2" :"0");
  svn_hash_sets(params.fs_config, SVN_FS_CONFIG_FSFS_BLOCK_READ,
                use_block_read ? "1" :"0");

  SVN_ERR(svn_repos__config_pool_create(&params.config_pool,
                                        is_multi_threaded,
                                        pool));
  SVN_ERR(svn_repos__authz_pool_create(&params.authz_pool,
                                       params.config_pool,
                                       is_multi_threaded,
                                       pool));

  /* If a configuration file is specified, load it and any referenced
   * password and authorization files. */
  if (config_filename)
    {
      params.base = svn_dirent_dirname(config_filename, pool);

      SVN_ERR(svn_repos__config_pool_get(&params.cfg, NULL,
                                         params.config_pool,
                                         config_filename,
                                         TRUE, /* must_exist */
                                         FALSE, /* names_case_sensitive */
                                         NULL,
                                         pool));
    }

  if (log_filename)
    SVN_ERR(logger__create(&params.logger, log_filename, pool));
  else if (run_mode == run_mode_listen_once)
    SVN_ERR(logger__create_for_stderr(&params.logger, pool));

  if (params.tunnel_user && run_mode != run_mode_tunnel)
    {
      return svn_error_create(SVN_ERR_CL_ARG_PARSING_ERROR, NULL,
               _("Option --tunnel-user is only valid in tunnel mode"));
    }

  if (run_mode == run_mode_inetd || run_mode == run_mode_tunnel)
    {
      apr_pool_t *connection_pool;
      svn_ra_svn_conn_t *conn;
      svn_stream_t *stdin_stream;
      svn_stream_t *stdout_stream;

      params.tunnel = (run_mode == run_mode_tunnel);
      apr_pool_cleanup_register(pool, pool, apr_pool_cleanup_null,
                                redirect_stdout);

      SVN_ERR(svn_stream_for_stdin(&stdin_stream, pool));
      SVN_ERR(svn_stream_for_stdout(&stdout_stream, pool));

      /* Use a subpool for the connection to ensure that if SASL is used
       * the pool cleanup handlers that call sasl_dispose() (connection_pool)
       * and sasl_done() (pool) are run in the right order. See issue #3664. */
      connection_pool = svn_pool_create(pool);
      conn = svn_ra_svn_create_conn4(NULL, stdin_stream, stdout_stream,
                                     params.compression_level,
                                     params.zero_copy_limit,
                                     params.error_check_interval,
                                     connection_pool);
      err = serve(conn, &params, connection_pool);
      svn_pool_destroy(connection_pool);

      return err;
    }

#ifdef WIN32
  /* If svnserve needs to run as a Win32 service, then we need to
     coordinate with the Service Control Manager (SCM) before
     continuing.  This function call registers the svnserve.exe
     process with the SCM, waits for the "start" command from the SCM
     (which will come very quickly), and confirms that those steps
     succeeded.

     After this call succeeds, the service is free to run.  At some
     point in the future, the SCM will send a message to the service,
     requesting that it stop.  This is translated into a call to
     winservice_notify_stop().  The service is then responsible for
     cleanly terminating.

     We need to do this before actually starting the service logic
     (opening files, sockets, etc.) because the SCM wants you to
     connect *first*, then do your service-specific logic.  If the
     service process takes too long to connect to the SCM, then the
     SCM will decide that the service is busted, and will give up on
     it.
     */
  if (run_mode == run_mode_service)
    {
      err = winservice_start();
      if (err)
        {
          svn_handle_error2(err, stderr, FALSE, "svnserve: ");

          /* This is the most common error.  It means the user started
             svnserve from a shell, and specified the --service
             argument.  svnserve cannot be started, as a service, in
             this way.  The --service argument is valid only valid if
             svnserve is started by the SCM. */
          if (err->apr_err ==
              APR_FROM_OS_ERROR(ERROR_FAILED_SERVICE_CONTROLLER_CONNECT))
            {
              svn_error_clear(svn_cmdline_fprintf(stderr, pool,
                  _("svnserve: The --service flag is only valid if the"
                    " process is started by the Service Control Manager.\n")));
            }

          svn_error_clear(err);
          *exit_code = EXIT_FAILURE;
          return SVN_NO_ERROR;
        }

      /* The service is now in the "starting" state.  Before the SCM will
         consider the service "started", this thread must call the
         winservice_running() function. */
    }
#endif /* WIN32 */

  /* Make sure we have IPV6 support first before giving apr_sockaddr_info_get
     APR_UNSPEC, because it may give us back an IPV6 address even if we can't
     create IPV6 sockets. */

#if APR_HAVE_IPV6
#ifdef MAX_SECS_TO_LINGER
  /* ### old APR interface */
  status = apr_socket_create(&sock, APR_INET6, SOCK_STREAM, pool);
#else
  status = apr_socket_create(&sock, APR_INET6, SOCK_STREAM, APR_PROTO_TCP,
                             pool);
#endif
  if (status == 0)
    {
      apr_socket_close(sock);
      family = APR_UNSPEC;

      if (prefer_v6)
        {
          if (host == NULL)
            host = "::";
          sockaddr_info_flags = APR_IPV6_ADDR_OK;
        }
      else
        {
          if (host == NULL)
            host = "0.0.0.0";
          sockaddr_info_flags = APR_IPV4_ADDR_OK;
        }
    }
#endif

  status = apr_sockaddr_info_get(&sa, host, family, port,
                                 sockaddr_info_flags, pool);
  if (status)
    {
      return svn_error_wrap_apr(status, _("Can't get address info"));
    }


#ifdef MAX_SECS_TO_LINGER
  /* ### old APR interface */
  status = apr_socket_create(&sock, sa->family, SOCK_STREAM, pool);
#else
  status = apr_socket_create(&sock, sa->family, SOCK_STREAM, APR_PROTO_TCP,
                             pool);
#endif
  if (status)
    {
      return svn_error_wrap_apr(status, _("Can't create server socket"));
    }

  /* Prevents "socket in use" errors when server is killed and quickly
   * restarted. */
  status = apr_socket_opt_set(sock, APR_SO_REUSEADDR, 1);
  if (status)
    {
      return svn_error_wrap_apr(status, _("Can't set options on server socket"));
    }

  status = apr_socket_bind(sock, sa);
  if (status)
    {
      return svn_error_wrap_apr(status, _("Can't bind server socket"));
    }

  status = apr_socket_listen(sock, ACCEPT_BACKLOG);
  if (status)
    {
      return svn_error_wrap_apr(status, _("Can't listen on server socket"));
    }

#if APR_HAS_FORK
  if (run_mode != run_mode_listen_once && !foreground)
    /* ### ignoring errors... */
    apr_proc_detach(APR_PROC_DETACH_DAEMONIZE);

  apr_signal(SIGCHLD, sigchld_handler);
#endif

#ifdef SIGPIPE
  /* Disable SIGPIPE generation for the platforms that have it. */
  apr_signal(SIGPIPE, SIG_IGN);
#endif

#ifdef SIGXFSZ
  /* Disable SIGXFSZ generation for the platforms that have it, otherwise
   * working with large files when compiled against an APR that doesn't have
   * large file support will crash the program, which is uncool. */
  apr_signal(SIGXFSZ, SIG_IGN);
#endif

  if (pid_filename)
    SVN_ERR(write_pid_file(pid_filename, pool));

#ifdef WIN32
  status = apr_os_sock_get(&winservice_svnserve_accept_socket, sock);
  if (status)
    winservice_svnserve_accept_socket = INVALID_SOCKET;

  /* At this point, the service is "running".  Notify the SCM. */
  if (run_mode == run_mode_service)
    winservice_running();
#endif

  /* Configure FS caches for maximum efficiency with svnserve.
   * For pre-forked (i.e. multi-processed) mode of operation,
   * keep the per-process caches smaller than the default.
   * Also, apply the respective command line parameters, if given. */
  {
    svn_cache_config_t settings = *svn_cache_config_get();

    if (params.memory_cache_size != -1)
      settings.cache_size = params.memory_cache_size;

    settings.single_threaded = TRUE;
    if (handling_mode == connection_mode_thread)
      {
#if APR_HAS_THREADS
        settings.single_threaded = FALSE;
#else
        /* No requests will be processed at all
         * (see "switch (handling_mode)" code further down).
         * But if they were, some other synchronization code
         * would need to take care of securing integrity of
         * APR-based structures. That would include our caches.
         */
#endif
      }

    svn_cache_config_set(&settings);
  }

#if APR_HAS_THREADS
  SVN_ERR(svn_root_pools__create(&connection_pools));

  if (handling_mode == connection_mode_thread)
    {
      /* create the thread pool with a valid range of threads */
      if (max_thread_count < 1)
        max_thread_count = 1;
      if (min_thread_count > max_thread_count)
        min_thread_count = max_thread_count;

      status = apr_thread_pool_create(&threads,
                                      min_thread_count,
                                      max_thread_count,
                                      pool);
      if (status)
        {
          return svn_error_wrap_apr(status, _("Can't create thread pool"));
        }

      /* let idle threads linger for a while in case more requests are
         coming in */
      apr_thread_pool_idle_wait_set(threads, THREADPOOL_THREAD_IDLE_LIMIT);

      /* don't queue requests unless we reached the worker thread limit */
      apr_thread_pool_threshold_set(threads, 0);
    }
  else
    {
      threads = NULL;
    }
#endif

  while (1)
    {
      connection_t *connection = NULL;
      SVN_ERR(accept_connection(&connection, sock, &params, handling_mode,
                                pool));
      if (run_mode == run_mode_listen_once)
        {
          err = serve_socket(connection, connection->pool);
          close_connection(connection);
          return err;
        }

      switch (handling_mode)
        {
        case connection_mode_fork:
#if APR_HAS_FORK
          status = apr_proc_fork(&proc, connection->pool);
          if (status == APR_INCHILD)
            {
              /* the child would't listen to the main server's socket */
              apr_socket_close(sock);

              /* serve_socket() logs any error it returns, so ignore it. */
              svn_error_clear(serve_socket(connection, connection->pool));
              close_connection(connection);
              return SVN_NO_ERROR;
            }
          else if (status != APR_INPARENT)
            {
              err = svn_error_wrap_apr(status, "apr_proc_fork");
              logger__log_error(params.logger, err, NULL, NULL);
              svn_error_clear(err);
            }
#endif
          break;

        case connection_mode_thread:
          /* Create a detached thread for each connection.  That's not a
             particularly sophisticated strategy for a threaded server, it's
             little different from forking one process per connection. */
#if APR_HAS_THREADS
          attach_connection(connection);

          status = apr_thread_pool_push(threads, serve_thread, connection,
                                        0, NULL);
          if (status)
            {
              return svn_error_wrap_apr(status, _("Can't push task"));
            }
#endif
          break;

        case connection_mode_single:
          /* Serve one connection at a time. */
          /* serve_socket() logs any error it returns, so ignore it. */
          svn_error_clear(serve_socket(connection, connection->pool));
        }

      close_connection(connection);
    }

  /* NOTREACHED */
}
int main(int argc, char *argv[])
{
	char errbuf[ERRBUFLEN + 1];
	apr_pool_t *pool;
	apr_proc_t proc;
	dynalogin_session_t *h;
	apr_status_t res;

	apr_sockaddr_t *sa;
	apr_socket_t *socket, *socket_new;

	char *cfg_filename;
	char *bind_address;
	int bind_port;
	int qlen = 32;
	int cfg_detach = 1;
	int ret;

	int done = 0;

	apr_hash_t *config;

	if(apr_initialize() != APR_SUCCESS)
	{
		fprintf(stderr, "apr_initialize failed\n");
		return 1;
	}

	/* Just return an error if a client closes a socket */
	apr_signal_block(SIGPIPE);

	openlog(argv[0], LOG_PID, LOG_AUTHPRIV);

	if((res = apr_pool_create(&pool, NULL)) != APR_SUCCESS)
	{
		syslog(LOG_ERR, "failed to create root pool: %s",
				apr_strerror(res, errbuf, ERRBUFLEN));
		return 1;
	}

	if(argc == 2)
		cfg_filename = argv[1];
	else
		cfg_filename = apr_psprintf(pool, "%s%c%s",
			SYSCONFDIR, DIR_SEP, DEFAULT_CONFIG_FILENAME);
	if(cfg_filename == NULL)
	{
		syslog(LOG_ERR, "apr_psprintf failed to create filename: %s",
				apr_strerror(res, errbuf, ERRBUFLEN));
		return 1;
	}
	/* Read config */
	if(dynalogin_read_config_from_file(&config, cfg_filename, pool)
			!= DYNALOGIN_SUCCESS)
	{
		syslog(LOG_ERR, "failed to read config file %s",
				cfg_filename);
		return 1;
	}

	/* Set up DYNALOGIN session (threadsafe?) */
	if(dynalogin_init(&h, pool, config) != DYNALOGIN_SUCCESS)
	{
		syslog(LOG_ERR, "failed to init dynalogin stack");
		return 1;
	}

	/* Daemonize? */
	GET_INT_PARAM(cfg_detach, config, DYNALOGIND_PARAM_DETACH)
	if((res=apr_proc_detach(cfg_detach)) != APR_SUCCESS)
	{
		syslog(LOG_ERR, "failed to detach: %s",
				apr_strerror(res, errbuf, ERRBUFLEN));
		return 1;
	}

	/* Create socket for clients */
	if((res=apr_socket_create(&socket,
			APR_INET, SOCK_STREAM, APR_PROTO_TCP, pool))!=APR_SUCCESS)
	{
		syslog(LOG_ERR, "failed to create listening socket: %s",
				apr_strerror(res, errbuf, ERRBUFLEN));
		return 1;
	}
	GET_STRING_PARAM_DEF(bind_address, config, DYNALOGIND_PARAM_BIND_ADDR, DEFAULT_BIND_ADDR)
	GET_INT_PARAM_DEF(bind_port, config, DYNALOGIND_PARAM_BIND_PORT, DEFAULT_BIND_PORT)
	if((res=apr_sockaddr_info_get(&sa, bind_address, APR_UNSPEC,
			bind_port, APR_IPV4_ADDR_OK || APR_IPV6_ADDR_OK, pool))!=APR_SUCCESS)
	{
		syslog(LOG_ERR, "failed to resolve bind address: %s",
				apr_strerror(res, errbuf, ERRBUFLEN));
		apr_socket_close(socket);
		return 1;
	}
	if((res=apr_socket_opt_set(socket, APR_SO_REUSEADDR, 1))!=APR_SUCCESS)
	{
		syslog(LOG_ERR, "failed to set APR_SO_REUSEADDR: %s",
			apr_strerror(res, errbuf, ERRBUFLEN));
		apr_socket_close(socket);
		return 1;
	}
	if((res=apr_socket_bind(socket, sa))!=APR_SUCCESS)
	{
		syslog(LOG_ERR, "failed to bind: %s",
				apr_strerror(res, errbuf, ERRBUFLEN));
		apr_socket_close(socket);
		return 1;
	}

	GET_STRING_PARAM_DEF(tls_cert, config, DYNALOGIND_PARAM_TLS_CERT, NULL)
	GET_STRING_PARAM_DEF(tls_key, config, DYNALOGIND_PARAM_TLS_KEY, NULL)
	if(tls_cert != NULL)
	{
		if(tls_key == NULL)
		{
			syslog(LOG_ERR, "%s specified, but %s not specified", DYNALOGIND_PARAM_TLS_CERT,
					DYNALOGIND_PARAM_TLS_KEY);
			return 1;
		}

		gnutls_global_init ();

		gnutls_certificate_allocate_credentials (&x509_cred);

		ret = gnutls_certificate_set_x509_key_file (x509_cred, tls_cert, tls_key,
				GNUTLS_X509_FMT_PEM);
		if (ret < 0)
		{
			syslog(LOG_ERR, "No certificate or key were found");
			return 1;
		}

		generate_dh_params ();

		gnutls_priority_init (&priority_cache, "PERFORMANCE:%SERVER_PRECEDENCE", NULL);

		gnutls_certificate_set_dh_params (x509_cred, dh_params);
	}
	else if(tls_key == NULL)
	{
		syslog(LOG_ERR, "%s specified, but %s not specified", DYNALOGIND_PARAM_TLS_KEY,
				DYNALOGIND_PARAM_TLS_CERT);
		return 1;
	}

	/* Main loop */
	while(done != 1)
	{
		if((res=apr_socket_listen(socket, qlen))!=APR_SUCCESS)
		{
			syslog(LOG_ERR, "failed apr_socket_listen: %s",
					apr_strerror(res, errbuf, ERRBUFLEN));
			apr_socket_close(socket);
			return 1;
		}

		if((res=apr_socket_accept(&socket_new, socket, pool))!=APR_SUCCESS)
		{
			syslog(LOG_ERR, "failed to accept incoming connection: %s",
					apr_strerror(res, errbuf, ERRBUFLEN));
			apr_socket_close(socket);
			return 1;
		}
		syslog(LOG_INFO, "new incoming connection");
		if((res=handle_new_client(socket_new, pool, h))!=APR_SUCCESS)
		{
			syslog(LOG_ERR, "failed to handle incoming connection: %s",
					apr_strerror(res, errbuf, ERRBUFLEN));
			apr_socket_close(socket);
			return 1;
		}
	}
	apr_socket_close(socket);
	return 0;
}
Beispiel #9
0
/////////////////////////////////////////////////////////////////////////////////
//
// Function:
//
// Purpose:
//
// Parameters:
//
// Return value:
//
// Author: Komatsu Yuji(Zheng Chuyu)
//
/////////////////////////////////////////////////////////////////////////////////
int main(int argc, char **argv)
{
    int rc;
    jhkarg_t *argument;
    jhkconf_t *cfg;

    rc = -1;
    apr_initialize();
    apr_pool_create(&jx_pool, NULL);
    apr_signal_init(jx_pool);

    // load command line
    if (jhkarg_create(argc, argv) != 0)
        goto error;
    argument = jhkarg_get();

    // load config file
    if (jhkconf_create(argument->config) != 0)
        goto error;
    cfg = jhkconf_get();

    // log
    if (jhklog_create(cfg) != 0)
        goto error;
    if (jhklog_open() != 0)
        goto error;

    // logging the basic information
    jhklog_info("Starting jHako Server. %s v%s",
                APPLICATION_NAME, JHAKO_VERSION);
    jhklog_info("Using configuration file. %s", argument->config);

    // joblog
    if (jhkjoblog_create(cfg->joblogfile) != 0)
        goto error;
    if (jhkjoblog_open() != 0)
        goto error;

    // database
    if (jhkdb_create(cfg) != 0)
        goto error;

    // start daemon
    apr_proc_detach(APR_PROC_DETACH_DAEMONIZE);

    // parent process
    jx_pid = getpid();
    if (jhkpid_create(cfg->pidfile) != 0) {
        jhklog_crit("In %s() can not create pidfile. %s", __func__,
                    cfg->pidfile);
        goto error;
    }

    atexit(jhako_on_exit);
    jhk_set_signal_handler();
    jhako_children_start();

    rc = 0;
error:
    jhkdb_destroy();
    jhkjoblog_destroy();
    jhklog_destroy();
    jhkconf_destroy();
    jhkarg_destroy();

    apr_terminate();
    exit(rc);
}