int main(int argc, char *argv[])
{
uint8_t buf[BUF_SIZE];
int i = 0;
uint8_t temp, temp_last;
if (argc == 1) {
printf("Usage: %s [-s <resolution>] | [-c <filename]", argv[0]);
printf(" -s <resolution> Set resolution, valid resolutions are:\n");
printf(" 320x240\n");
printf(" 640x480\n");
printf(" 800x600\n");
//printf(" 1280x720\n");
printf(" 1920x1080\n");
printf(" 2048x1563\n");
printf(" 2592x1944\n");
printf(" -c <filename> Capture image\n");
exit(EXIT_SUCCESS);
}
if (strcmp(argv[1], "-c") == 0 && argc == 4) {
setup();
arducam_set_format(fmtJPEG);
arducam_init();
// Change to JPEG capture mode and initialize the OV2640 module
if (strcmp(argv[3], "320x240") == 0) arducam_OV5642_set_jpeg_size(OV5642_320x240);
else if (strcmp(argv[3], "640x480") == 0) arducam_OV5642_set_jpeg_size(OV5642_640x480);
//else if (strcmp(argv[2], "1280x720") == 0) arducam_OV5642_set_jpeg_size(OV5642_1280x720);
else if (strcmp(argv[3], "1920x1080") == 0) arducam_OV5642_set_jpeg_size(OV5642_1920x1080);
else if (strcmp(argv[3], "2048x1536") == 0) arducam_OV5642_set_jpeg_size(OV5642_2048x1536);
else if (strcmp(argv[3], "2592x1944") == 0) arducam_OV5642_set_jpeg_size(OV5642_2592x1944);
else {
printf("Unknown resolution %s\n", argv[3]);
exit(EXIT_FAILURE);
}
sleep(1); // Let auto exposure do it's thing after changing image settings
printf("Changed resolution1 to %s\n", argv[3]);
delay(1000);
arducam_write_reg(ARDUCHIP_TIM, VSYNC_LEVEL_MASK,CAM1_CS); //VSYNC is active HIGH
// Flush the FIFO
arducam_flush_fifo(CAM1_CS);
// Clear the capture done flag
arducam_clear_fifo_flag(CAM1_CS);
// Start capture
printf("Start capture\n");
arducam_start_capture(CAM1_CS);
while (!(arducam_read_reg(ARDUCHIP_TRIG,CAM1_CS) & CAP_DONE_MASK)) ;
printf(" CAM1 Capture Done\n");
// Open the new file
FILE *fp1 = fopen(argv[2], "w+");
if (!fp1) {
printf("Error: could not open %s\n", argv[2]);
exit(EXIT_FAILURE);
}
printf("Reading FIFO\n");
i = 0;
temp = arducam_read_fifo(CAM1_CS);
// Write first image data to buffer
buf[i++] = temp;
// Read JPEG data from FIFO
while((temp != 0xD9) | (temp_last != 0xFF)) {
temp_last = temp;
temp = arducam_read_fifo(CAM1_CS);
// Write image data to buffer if not full
if(i < BUF_SIZE) {
buf[i++] = temp;
} else {
// Write BUF_SIZE uint8_ts image data to file
fwrite(buf, BUF_SIZE, 1, fp1);
i = 0;
buf[i++] = temp;
}
}
// Write the remain uint8_ts in the buffer
if(i > 0) {
fwrite(buf, i, 1, fp1);
}
// Close the file
fclose(fp1);
// Clear the capture done flag
arducam_clear_fifo_flag(CAM1_CS);
} else {
printf("Error: unknown or missing argument.\n");
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
int main(void)
{
BOOL isShowFlag = TRUE;
int nmemb = 1;
setup();
while(1)
{
uint8_t buf[256];
static int i = 0;
uint8_t temp,temp_last;
uint8_t start_capture = 0;
//Wait trigger from shutter buttom
if(arducam_read_reg(ARDUCHIP_TRIG) & SHUTTER_MASK)
{
isShowFlag = FALSE;
arducam_write_reg(ARDUCHIP_MODE, 0x00);
arducam_set_format(fmtJPEG);
arducam_init();
arducam_write_reg(ARDUCHIP_TIM, VSYNC_LEVEL_MASK); //VSYNC is active HIGH
//Wait until buttom released
while(arducam_read_reg(ARDUCHIP_TRIG) & SHUTTER_MASK);
arducam_delay_ms(1000);
start_capture = 1;
}
else
{
if(isShowFlag )
{
temp = arducam_read_reg(ARDUCHIP_TRIG);
if(!(temp & VSYNC_MASK)) //New Frame is coming
{
arducam_write_reg(ARDUCHIP_MODE, 0x00); //Switch to MCU
resetXY();
arducam_write_reg(ARDUCHIP_MODE, 0x01); //Switch to CAM
while(!(arducam_read_reg(ARDUCHIP_TRIG)&0x01)); //Wait for VSYNC is gone
}
}
}
if(start_capture)
{
//Flush the FIFO
arducam_flush_fifo();
//Clear the capture done flag
arducam_clear_fifo_flag();
//Start capture
arducam_start_capture();
printf("Start Capture\n");
}
if(arducam_read_reg(ARDUCHIP_TRIG) & CAP_DONE_MASK)
{
printf("Capture Done!\n");
//Construct a file name
char filePath[128];
time_t timep;
struct tm *p;
time(&timep);
p = localtime(&timep);
printf("Capture Done!\n");
snprintf(filePath, sizeof(filePath), "/home/pi/%04d%02d%02d%02d%02d%02d.bmp", 1900+p->tm_year, 1+p->tm_mon, p->tm_mday, p->tm_hour, p->tm_min, p->tm_sec);
//Open the new file
FILE *fp = fopen(filePath,"w+");
if (fp == NULL)
{
printf("open file failed");
exit(EXIT_FAILURE);
}
i = 0;
temp = arducam_read_fifo();
//Write first image data to buffer
buf[i++] = temp;
//Read JPEG data from FIFO
while( (temp != 0xD9) | (temp_last != 0xFF) )
{
temp_last = temp;
temp = arducam_read_fifo();
//Write image data to buffer if not full
if(i < 256)
buf[i++] = temp;
else
{
//Write 256 uint8_ts image data to file
fwrite(buf,256,nmemb,fp);
i = 0;
buf[i++] = temp;
}
}
//Write the remain uint8_ts in the buffer
if(i > 0)
fwrite(buf,i,nmemb,fp);
//Close the file
fclose(fp);
//Clear the capture done flag
arducam_clear_fifo_flag();
//Clear the start capture flag
start_capture = 0;
arducam_set_format(fmtBMP);
arducam_init();
isShowFlag = TRUE;
}
}
exit(EXIT_SUCCESS);
}