void BSP_START_SECTION bsp_start_hook_1(void)
{
bsp_start_config_uarts();
/* Copy .text section */
arm_cp15_instruction_cache_invalidate();
bsp_start_memcpy(
(int *) bsp_section_text_begin,
(const int *) bsp_section_text_load_begin,
(size_t) bsp_section_text_size
);
/* Copy .rodata section */
arm_cp15_instruction_cache_invalidate();
bsp_start_memcpy(
(int *) bsp_section_rodata_begin,
(const int *) bsp_section_rodata_load_begin,
(size_t) bsp_section_rodata_size
);
/* Copy .data section */
arm_cp15_instruction_cache_invalidate();
bsp_start_memcpy(
(int *) bsp_section_data_begin,
(const int *) bsp_section_data_load_begin,
(size_t) bsp_section_data_size
);
/* Copy .fast section */
arm_cp15_instruction_cache_invalidate();
bsp_start_memcpy(
(int *) bsp_section_fast_begin,
(const int *) bsp_section_fast_load_begin,
(size_t) bsp_section_fast_size
);
/* Clear .bss section */
lpc32xx_clear_bss();
/* At this point we can use objects outside the .start section */
}
void BSP_START_TEXT_SECTION bsp_start_hook_0(void)
{
uint32_t sctlr_val;
sctlr_val = arm_cp15_get_control();
/*
* Current U-boot loader seems to start kernel image
* with I and D caches on and MMU enabled.
* If RTEMS application image finds that cache is on
* during startup then disable caches.
*/
if (sctlr_val & (ARM_CP15_CTRL_I | ARM_CP15_CTRL_C | ARM_CP15_CTRL_M)) {
if (sctlr_val & (ARM_CP15_CTRL_C | ARM_CP15_CTRL_M)) {
/*
* If the data cache is on then ensure that it is clean
* before switching off to be extra carefull.
*/
arm_cp15_drain_write_buffer();
arm_cp15_data_cache_clean_and_invalidate();
}
arm_cp15_flush_prefetch_buffer();
sctlr_val &= ~(ARM_CP15_CTRL_I | ARM_CP15_CTRL_C | ARM_CP15_CTRL_M | ARM_CP15_CTRL_A);
arm_cp15_set_control(sctlr_val);
arm_cp15_tlb_invalidate();
arm_cp15_flush_prefetch_buffer();
arm_cp15_data_cache_invalidate();
arm_cp15_instruction_cache_invalidate();
}
/* Clear Translation Table Base Control Register */
arm_cp15_set_translation_table_base_control_register(0);
/* Clear Secure or Non-secure Vector Base Address Register */
arm_cp15_set_vector_base_address(0);
}
