void smf_mapbounds( int fast, Grp *igrp, int size, const char *system,
AstFrameSet *spacerefwcs, int alignsys, int *lbnd_out,
int *ubnd_out, AstFrameSet **outframeset, int *moving,
smfBox ** boxes, fts2Port fts_port, int *status ) {
/* Local Variables */
AstSkyFrame *abskyframe = NULL; /* Output Absolute SkyFrame */
int actval; /* Number of parameter values supplied */
AstMapping *bolo2map = NULL; /* Combined mapping bolo->map
coordinates, WCS->GRID Mapping from
input WCS FrameSet */
smfBox *box = NULL; /* smfBox for current file */
smfData *data = NULL; /* pointer to SCUBA2 data struct */
double dlbnd[ 2 ]; /* Floating point lower bounds for output map */
drcntrl_bits drcntrl_mask = 0;/* Mask to use for DRCONTROL on this instrument */
double dubnd[ 2 ]; /* Floating point upper bounds for output map */
AstMapping *fast_map = NULL; /* Mapping from tracking to absolute map coords */
smfFile *file = NULL; /* SCUBA2 data file information */
int first; /* Is this the first good subscan ? */
AstFitsChan *fitschan = NULL;/* Fits channels to construct WCS header */
AstFrameSet *fs = NULL; /* A general purpose FrameSet pointer */
smfHead *hdr = NULL; /* Pointer to data header this time slice */
int i; /* Loop counter */
dim_t j; /* Loop counter */
AstSkyFrame *junksky = NULL; /* Unused SkyFrame argument */
dim_t k; /* Loop counter */
int lbnd0[ 2 ]; /* Defaults for LBND parameter */
double map_pa=0; /* Map PA in output coord system (rads) */
dim_t maxloop; /* Number of times to go round the time slice loop */
dim_t nbadt = 0; /* Number of bad time slices */
dim_t ngoodt = 0; /* Number of good time slices */
double par[7]; /* Projection parameters */
double shift[ 2 ]; /* Shifts from PIXEL to GRID coords */
AstMapping *oskymap = NULL; /* Mapping celestial->map coordinates,
Sky <> PIXEL mapping in output
FrameSet */
AstSkyFrame *oskyframe = NULL;/* Output SkyFrame */
char *refsys = NULL; /* Sky system from supplied reference FrameSet */
dim_t textreme[4]; /* Time index corresponding to minmax TCS posn */
AstFrame *skyin = NULL; /* Sky Frame in input FrameSet */
double skyref[ 2 ]; /* Values for output SkyFrame SkyRef attribute */
struct timeval tv1; /* Timer */
struct timeval tv2; /* Timer */
AstMapping *tmap; /* Temporary Mapping */
int trim; /* Trim borders of bad pixels from o/p image? */
int ubnd0[ 2 ]; /* Defaults for UBND parameter */
double x_array_corners[4]; /* X-Indices for corner bolos in array */
double x_map[4]; /* Projected X-coordinates of corner bolos */
double y_array_corners[4]; /* Y-Indices for corner pixels in array */
double y_map[4]; /* Projected X-coordinates of corner bolos */
/* Main routine */
if (*status != SAI__OK) return;
/* Start a timer to see how long this takes */
smf_timerinit( &tv1, &tv2, status );
/* Initialize pointer to output FrameSet and moving-source flag */
*outframeset = NULL;
*moving = 0;
/* initialize double precision output bounds and the proj pars */
for( i = 0; i < 7; i++ ) par[ i ] = AST__BAD;
dlbnd[ 0 ] = VAL__MAXD;
dlbnd[ 1 ] = VAL__MAXD;
dubnd[ 0 ] = VAL__MIND;
dubnd[ 1 ] = VAL__MIND;
/* If we have a supplied reference WCS we can use that directly
without having to calculate it from the data. Replace the requested
system with the system from the reference FrameSet (take a copy of the
string since astGetC may re-use its buffer). */
if (spacerefwcs) {
oskyframe = astGetFrame( spacerefwcs, AST__CURRENT );
int nc = 0;
refsys = astAppendString( NULL, &nc, astGetC( oskyframe, "System" ) );
system = refsys;
}
/* Create array of returned smfBox structures and store a pointer
to the next one to be initialised. */
*boxes = astMalloc( sizeof( smfBox ) * size );
box = *boxes;
astBegin;
/* Loop over all files in the Grp */
first = 1;
for( i=1; i<=size; i++, box++ ) {
/* Initialise the spatial bounds of section of the the output cube that is
contributed to by the current ionput file. */
box->lbnd[ 0 ] = VAL__MAXD;
box->lbnd[ 1 ] = VAL__MAXD;
box->ubnd[ 0 ] = VAL__MIND;
box->ubnd[ 1 ] = VAL__MIND;
/* Read data from the ith input file in the group */
smf_open_file( NULL, igrp, i, "READ", SMF__NOCREATE_DATA, &data, status );
if (*status != SAI__OK) {
msgSeti( "I", i );
errRep( "smf_mapbounds", "Could not open data file no ^I.", status );
break;
} else {
if( *status == SAI__OK ) {
if( data->file == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfFile associated with smfData.",
status );
break;
} else if( data->hdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfHead associated with smfData.",
status );
break;
} else if( data->hdr->fitshdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No FITS header associated with smfHead.",
status );
break;
}
}
}
/* convenience pointers */
file = data->file;
hdr = data->hdr;
/* report name of the input file */
smf_smfFile_msg( file, "FILE", 1, "<unknown>" );
msgSeti("I", i);
msgSeti("N", size);
msgOutif(MSG__VERB, " ",
"SMF_MAPBOUNDS: Processing ^I/^N ^FILE",
status);
/* Check that there are 3 pixel axes. */
if( data->ndims != 3 ) {
smf_smfFile_msg( file, "FILE", 1, "<unknown>" );
msgSeti( "NDIMS", data->ndims );
*status = SAI__ERROR;
errRep( FUNC_NAME, "^FILE has ^NDIMS pixel axes, should be 3.",
status );
break;
}
/* Check that the data dimensions are 3 (for time ordered data) */
if( *status == SAI__OK ) {
/* If OK Decide which detectors (GRID coord) to use for
checking bounds, depending on the instrument in use. */
switch( hdr->instrument ) {
case INST__SCUBA2:
drcntrl_mask = DRCNTRL__POSITION;
/* 4 corner bolometers of the subarray */
x_array_corners[0] = 1;
x_array_corners[1] = 1;
x_array_corners[2] = (data->dims)[0];
x_array_corners[3] = (data->dims)[0];
y_array_corners[0] = 1;
y_array_corners[1] = (data->dims)[1];
y_array_corners[2] = 1;
y_array_corners[3] = (data->dims)[1];
break;
case INST__AZTEC:
/* Rough guess for extreme bolometers around the edge */
x_array_corners[0] = 22;
x_array_corners[1] = 65;
x_array_corners[2] = 73;
x_array_corners[3] = 98;
y_array_corners[0] = 1; /* Always 1 for AzTEC */
y_array_corners[1] = 1;
y_array_corners[2] = 1;
y_array_corners[3] = 1;
break;
case INST__ACSIS:
smf_find_acsis_corners( data, x_array_corners, y_array_corners,
status);
break;
default:
*status = SAI__ERROR;
errRep(FUNC_NAME, "Don't know how to calculate mapbounds for data created with this instrument", status);
}
}
if( *status == SAI__OK) {
size_t goodidx = SMF__BADSZT;
/* Need to build up a frameset based on good telescope position.
We can not assume that we the first step will be a good TCS position
so we look for one. If we can not find anything we skip to the
next file. */
maxloop = (data->dims)[2];
for (j=0; j<maxloop; j++) {
JCMTState state = (hdr->allState)[j];
if (state.jos_drcontrol >= 0 && state.jos_drcontrol & drcntrl_mask ) {
/* bad TCS - so try again */
} else {
/* Good tcs */
goodidx = j;
break;
}
}
if (goodidx == SMF__BADSZT) {
smf_smfFile_msg( data->file, "FILE", 1, "<unknown>");
msgOutif( MSG__QUIET, "", "No good telescope positions found in file ^FILE. Ignoring",
status );
smf_close_file( NULL, &data, status );
continue;
}
/* If we are dealing with the first good file, create the output
SkyFrame. */
if( first ) {
first = 0;
/* Create output SkyFrame if it has not come from a reference */
if ( oskyframe == NULL ) {
/* smf_tslice_ast only needs to get called once to set up framesets */
if( hdr->wcs == NULL ) {
smf_tslice_ast( data, goodidx, 1, fts_port, status);
}
/* Retrieve input SkyFrame */
skyin = astGetFrame( hdr->wcs, AST__CURRENT );
smf_calc_skyframe( skyin, system, hdr, alignsys, &oskyframe, skyref,
moving, status );
/* Get the orientation of the map vertical within the output celestial
coordinate system. This is derived form the MAP_PA FITS header, which
gives the orientation of the map vertical within the tracking system. */
map_pa = smf_calc_mappa( hdr, system, skyin, status );
/* Provide a sensible default for the pixel size based on wavelength */
par[4] = smf_calc_telres( hdr->fitshdr, status );
par[4] *= AST__DD2R/3600.0;
par[5] = par[4];
/* Calculate the projection parameters. We do not enable autogrid determination
for SCUBA-2 so we do not need to obtain all the data before calculating
projection parameters. */
smf_get_projpar( oskyframe, skyref, *moving, 0, 0, NULL, 0,
map_pa, par, NULL, NULL, status );
if (skyin) skyin = astAnnul( skyin );
/* If the output skyframe has been supplied, we still need to
determine whether the source is moving or not, and set the
reference position. */
} else {
/* smf_tslice_ast only needs to get called once to set up framesets */
if( hdr->wcs == NULL ) {
smf_tslice_ast( data, goodidx, 1, fts_port, status);
}
/* Retrieve input SkyFrame */
skyin = astGetFrame( hdr->wcs, AST__CURRENT );
smf_calc_skyframe( skyin, system, hdr, alignsys, &junksky, skyref,
moving, status );
/* Store the sky reference position. If the target is moving,
ensure the returned SkyFrame represents offsets from the
reference position rather than absolute coords. */
astSetD( oskyframe, "SkyRef(1)", skyref[ 0 ] );
astSetD( oskyframe, "SkyRef(2)", skyref[ 1 ] );
if( *moving ) astSet( oskyframe, "SkyRefIs=Origin" );
/* Ensure the Epoch attribute in the map is set to the date of
the first data in the map, rather than the date in supplied
reference WCS. */
astSetD( oskyframe, "Epoch", astGetD( junksky, "Epoch" ) );
}
if ( *outframeset == NULL && oskyframe != NULL && (*status == SAI__OK)){
/* Now created a spatial Mapping. Use the supplied reference frameset
if supplied */
if (spacerefwcs) {
oskymap = astGetMapping( spacerefwcs, AST__BASE, AST__CURRENT );
} else {
/* Now populate a FitsChan with FITS-WCS headers describing
the required tan plane projection. The longitude and
latitude axis types are set to either (RA,Dec) or (AZ,EL)
to get the correct handedness. */
fitschan = astFitsChan ( NULL, NULL, " " );
smf_makefitschan( astGetC( oskyframe, "System"), &(par[0]),
&(par[2]), &(par[4]), par[6], fitschan, status );
astClear( fitschan, "Card" );
fs = astRead( fitschan );
/* Extract the output PIXEL->SKY Mapping. */
oskymap = astGetMapping( fs, AST__BASE, AST__CURRENT );
/* Tidy up */
fs = astAnnul( fs );
}
/* Create the output FrameSet */
*outframeset = astFrameSet( astFrame(2, "Domain=GRID"), " " );
/* Now add the SkyFrame to it */
astAddFrame( *outframeset, AST__BASE, oskymap, oskyframe );
/* Now add a POLANAL Frame if required (i.e. if the input time
series are POL-2 Q/U values). */
smf_addpolanal( *outframeset, hdr, status );
/* Invert the oskymap mapping */
astInvert( oskymap );
} /* End WCS FrameSet construction */
}
/* Get a copy of the output SkyFrame and ensure it represents
absolute coords rather than offset coords. */
abskyframe = astCopy( oskyframe );
astClear( abskyframe, "SkyRefIs" );
astClear( abskyframe, "AlignOffset" );
maxloop = (data->dims)[2];
if (fast) {
/* For scan map we scan through looking for largest telescope moves.
For dream/stare we just look at the start and end time slices to
account for sky rotation. */
if (hdr->obsmode != SMF__OBS_SCAN) {
textreme[0] = 0;
textreme[1] = (data->dims)[2] - 1;
maxloop = 2;
} else {
const char *tracksys;
double *ac1list, *ac2list, *bc1list, *bc2list, *p1, *p2, *p3, *p4;
double flbnd[4], fubnd[4];
JCMTState state;
/* If the output and tracking systems are different, get a
Mapping between them. */
tracksys = sc2ast_convert_system( (hdr->allState)[goodidx].tcs_tr_sys,
status );
if( strcmp( system, tracksys ) ) {
AstSkyFrame *tempsf = astCopy( abskyframe );
astSetC( tempsf, "System", tracksys );
AstFrameSet *tempfs = astConvert( tempsf, abskyframe, "" );
tmap = astGetMapping( tempfs, AST__BASE, AST__CURRENT );
fast_map = astSimplify( tmap );
tmap = astAnnul( tmap );
tempsf = astAnnul( tempsf );
tempfs = astAnnul( tempfs );
} else {
fast_map = NULL;
}
/* Copy all ac1/2 positions into two array, and transform them
from tracking to absolute output sky coords. */
ac1list = astMalloc( maxloop*sizeof( *ac1list ) );
ac2list = astMalloc( maxloop*sizeof( *ac2list ) );
if( *status == SAI__OK ) {
p1 = ac1list;
p2 = ac2list;
for( j = 0; j < maxloop; j++ ) {
state = (hdr->allState)[ j ];
*(p1++) = state.tcs_tr_ac1;
*(p2++) = state.tcs_tr_ac2;
}
if( fast_map ) astTran2( fast_map, maxloop, ac1list, ac2list, 1,
ac1list, ac2list );
}
/* If the target is moving, we need to adjust these ac1/2 values
to represent offsets from the base position. */
if( *moving ) {
/* Copy all bc1/2 positions into two arrays. */
bc1list = astMalloc( maxloop*sizeof( *bc1list ) );
bc2list = astMalloc( maxloop*sizeof( *bc2list ) );
if( *status == SAI__OK ) {
p1 = bc1list;
p2 = bc2list;
for( j = 0; j < maxloop; j++ ) {
state = (hdr->allState)[ j ];
*(p1++) = state.tcs_tr_bc1;
*(p2++) = state.tcs_tr_bc2;
}
/* Transform them from tracking to absolute output sky coords. */
if( fast_map ) astTran2( fast_map, maxloop, bc1list, bc2list,
1, bc1list, bc2list );
/* Replace each ac1/2 position with the offsets from the
corresponding base position. */
p1 = bc1list;
p2 = bc2list;
p3 = ac1list;
p4 = ac2list;
for( j = 0; j < maxloop; j++ ) {
smf_offsets( *(p1++), *(p2++), p3++, p4++, status );
}
}
/* We no longer need the base positions. */
bc1list = astFree( bc1list );
bc2list = astFree( bc2list );
}
/* Transform the ac1/2 position from output sky coords to
output pixel coords. */
astTran2( oskymap, maxloop, ac1list, ac2list, 1, ac1list, ac2list );
/* Find the bounding box containing these pixel coords and the
time slices at which the boresight touches each edge of this
box. */
flbnd[ 0 ] = VAL__MAXD;
flbnd[ 1 ] = VAL__MAXD;
fubnd[ 0 ] = VAL__MIND;
fubnd[ 1 ] = VAL__MIND;
for( j = 0; j < 4; j++ ) textreme[ j ] = (dim_t) VAL__BADI;
if( *status == SAI__OK ) {
p1 = ac1list;
p2 = ac2list;
for( j = 0; j < maxloop; j++,p1++,p2++ ) {
if( *p1 != VAL__BADD && *p2 != VAL__BADD ){
if ( *p1 < flbnd[0] ) { flbnd[0] = *p1; textreme[0] = j; }
if ( *p2 < flbnd[1] ) { flbnd[1] = *p2; textreme[1] = j; }
if ( *p1 > fubnd[0] ) { fubnd[0] = *p1; textreme[2] = j; }
if ( *p2 > fubnd[1] ) { fubnd[1] = *p2; textreme[3] = j; }
}
}
}
maxloop = 4;
msgSetd("X1", textreme[0]);
msgSetd("X2", textreme[1]);
msgSetd("X3", textreme[2]);
msgSetd("X4", textreme[3]);
msgOutif( MSG__DEBUG, " ",
"Extrema time slices are ^X1, ^X2, ^X3 and ^X4",
status);
ac1list = astFree( ac1list );
ac2list = astFree( ac2list );
}
}
/* Get the astrometry for all the relevant time slices in this data file */
for( j=0; j<maxloop; j++ ) {
dim_t ts; /* Actual time slice to use */
/* if we are doing the fast loop, we need to read the time slice
index from textreme. Else we just use the index */
if (fast) {
/* get the index but make sure it is good */
ts = textreme[j];
if (ts == (dim_t)VAL__BADI) continue;
} else {
ts = j;
}
/* Calculate the bolo to map-pixel transformation for this tslice */
bolo2map = smf_rebin_totmap( data, ts, abskyframe, oskymap,
*moving, fts_port, status );
if ( *status == SAI__OK ) {
/* skip if we did not get a mapping this time round */
if (!bolo2map) continue;
/* Check corner pixels in the array for their projected extent
on the sky to set the pixel bounds */
astTran2( bolo2map, 4, x_array_corners, y_array_corners, 1,
x_map, y_map );
/* Update min/max for this time slice */
for( k=0; k<4; k++ ) {
if( x_map[k] != AST__BAD && y_map[k] != AST__BAD ) {
if( x_map[k] < dlbnd[0] ) dlbnd[0] = x_map[k];
if( y_map[k] < dlbnd[1] ) dlbnd[1] = y_map[k];
if( x_map[k] > dubnd[0] ) dubnd[0] = x_map[k];
if( y_map[k] > dubnd[1] ) dubnd[1] = y_map[k];
if( x_map[k] < box->lbnd[0] ) box->lbnd[0] = x_map[k];
if( y_map[k] < box->lbnd[1] ) box->lbnd[1] = y_map[k];
if( x_map[k] > box->ubnd[0] ) box->ubnd[0] = x_map[k];
if( y_map[k] > box->ubnd[1] ) box->ubnd[1] = y_map[k];
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "Extreme positions are bad.", status );
break;
}
}
}
/* Explicitly annul these mappings each time slice for reduced
memory usage */
if (bolo2map) bolo2map = astAnnul( bolo2map );
if (fs) fs = astAnnul( fs );
/* Break out of loop over time slices if bad status */
if (*status != SAI__OK) goto CLEANUP;
}
/* Annul any remaining Ast objects before moving on to the next file */
if (fs) fs = astAnnul( fs );
if (bolo2map) bolo2map = astAnnul( bolo2map );
}
/* Close the data file */
smf_close_file( NULL, &data, status);
/* Break out of loop over data files if bad status */
if (*status != SAI__OK) goto CLEANUP;
}
/* make sure we got values - should not be possible with good status */
if (dlbnd[0] == VAL__MAXD || dlbnd[1] == VAL__MAXD) {
if (*status == SAI__OK) {
*status = SAI__ERROR;
errRep( " ", "Unable to find any valid map bounds", status );
}
}
if (nbadt > 0) {
msgOutf( "", " Processed %zu time slices to calculate bounds,"
" of which %zu had bad telescope data and were skipped",
status, (size_t)(ngoodt+nbadt), (size_t)nbadt );
}
/* If spatial reference wcs was supplied, store par values that result in
no change to the pixel origin. */
if( spacerefwcs ){
par[ 0 ] = 0.5;
par[ 1 ] = 0.5;
}
/* Need to re-align with the interim GRID coordinates */
lbnd_out[0] = ceil( dlbnd[0] - par[0] + 0.5 );
ubnd_out[0] = ceil( dubnd[0] - par[0] + 0.5 );
lbnd_out[1] = ceil( dlbnd[1] - par[1] + 0.5 );
ubnd_out[1] = ceil( dubnd[1] - par[1] + 0.5 );
/* Do the same with the individual input file bounding boxes */
box = *boxes;
for (i = 1; i <= size; i++, box++) {
box->lbnd[0] = ceil( box->lbnd[0] - par[0] + 0.5);
box->ubnd[0] = ceil( box->ubnd[0] - par[0] + 0.5);
box->lbnd[1] = ceil( box->lbnd[1] - par[1] + 0.5);
box->ubnd[1] = ceil( box->ubnd[1] - par[1] + 0.5);
}
/* Apply a ShiftMap to the output FrameSet to re-align the GRID
coordinates */
shift[0] = 2.0 - par[0] - lbnd_out[0];
shift[1] = 2.0 - par[1] - lbnd_out[1];
astRemapFrame( *outframeset, AST__BASE, astShiftMap( 2, shift, " " ) );
/* Set the dynamic defaults for lbnd/ubnd */
lbnd0[ 0 ] = lbnd_out[ 0 ];
lbnd0[ 1 ] = lbnd_out[ 1 ];
parDef1i( "LBND", 2, lbnd0, status );
ubnd0[ 0 ] = ubnd_out[ 0 ];
ubnd0[ 1 ] = ubnd_out[ 1 ];
parDef1i( "UBND", 2, ubnd0, status );
parGet1i( "LBND", 2, lbnd_out, &actval, status );
if( actval == 1 ) lbnd_out[ 1 ] = lbnd_out[ 0 ];
parGet1i( "UBND", 2, ubnd_out, &actval, status );
if( actval == 1 ) ubnd_out[ 1 ] = ubnd_out[ 0 ];
/* Ensure the bounds are the right way round. */
if( lbnd_out[ 0 ] > ubnd_out[ 0 ] ) {
int itmp = lbnd_out[ 0 ];
lbnd_out[ 0 ] = ubnd_out[ 0 ];
ubnd_out[ 0 ] = itmp;
}
if( lbnd_out[ 1 ] > ubnd_out[ 1 ] ) {
int itmp = lbnd_out[ 1 ];
lbnd_out[ 1 ] = ubnd_out[ 1 ];
ubnd_out[ 1 ] = itmp;
}
/* If borders of bad pixels are being trimmed from the output image,
then do not allow the user-specified bounds to extend outside the
default bounding box (since we know that the default bounding box
encloses all available data). */
parGet0l( "TRIM", &trim, status );
if( trim ) {
if( lbnd_out[ 0 ] < lbnd0[ 0 ] ) lbnd_out[ 0 ] = lbnd0[ 0 ];
if( lbnd_out[ 1 ] < lbnd0[ 1 ] ) lbnd_out[ 1 ] = lbnd0[ 1 ];
if( ubnd_out[ 0 ] > ubnd0[ 0 ] ) ubnd_out[ 0 ] = ubnd0[ 0 ];
if( ubnd_out[ 1 ] > ubnd0[ 1 ] ) ubnd_out[ 1 ] = ubnd0[ 1 ];
}
/* Modify the returned FrameSet to take account of the new pixel origin. */
shift[ 0 ] = lbnd0[ 0 ] - lbnd_out[ 0 ];
shift[ 1 ] = lbnd0[ 1 ] - lbnd_out[ 1 ];
if( shift[ 0 ] != 0.0 || shift[ 1 ] != 0.0 ) {
astRemapFrame( *outframeset, AST__BASE, astShiftMap( 2, shift, " " ) );
}
/* Report the pixel bounds of the cube. */
if( *status == SAI__OK ) {
msgOutif( MSG__NORM, " ", " ", status );
msgSeti( "XL", lbnd_out[ 0 ] );
msgSeti( "YL", lbnd_out[ 1 ] );
msgSeti( "XU", ubnd_out[ 0 ] );
msgSeti( "YU", ubnd_out[ 1 ] );
msgOutif( MSG__NORM, " ", " Output map pixel bounds: ( ^XL:^XU, ^YL:^YU )",
status );
if( ( ubnd_out[ 0 ] - lbnd_out[ 0 ] + 1 ) > MAX_DIM ||
( ubnd_out[ 1 ] - lbnd_out[ 1 ] + 1 ) > MAX_DIM ) {
*status = SAI__ERROR;
errRep( "", FUNC_NAME ": The map is too big. Check your list of input "
"data files does not include widely separated observations.",
status );
}
}
/* If no error has occurred, export the returned FrameSet pointer from the
current AST context so that it will not be annulled when the AST
context is ended. Otherwise, ensure a null pointer is returned. */
if( *status == SAI__OK ) {
astExport( *outframeset );
} else {
*outframeset = astAnnul( *outframeset );
}
msgOutiff( SMF__TIMER_MSG, "",
"Took %.3f s to calculate map bounds",
status, smf_timerupdate( &tv1, &tv2, status ) );
/* Clean Up */
CLEANUP:
if (*status != SAI__OK) {
errRep(FUNC_NAME, "Unable to determine map bounds", status);
}
if (oskymap) oskymap = astAnnul( oskymap );
if (bolo2map) bolo2map = astAnnul( bolo2map );
if (fitschan) fitschan = astAnnul( fitschan );
if( data != NULL )
smf_close_file( NULL, &data, status );
refsys = astFree( refsys );
astEnd;
}
/* Main entry */
void smf_jsadicer( int indf, const char *base, int trim, smf_inst_t instrument,
smf_jsaproj_t proj, size_t *ntile, Grp *grp, int *status ){
/* Local Variables: */
AstBox *box;
AstFitsChan *fc;
AstFrame *specfrm = NULL;
AstFrame *tile_frm = NULL;
AstFrameSet *iwcs;
AstFrameSet *tfs = NULL;
AstFrameSet *tile_wcs;
AstMapping *ndf_map = NULL;
AstMapping *p2pmap = NULL;
AstMapping *specmap = NULL;
AstMapping *tile_map = NULL;
AstRegion *region;
Grp *grpt = NULL;
char *path;
char dtype[ NDF__SZFTP + 1 ];
char jsatile_comment[45];
char type[ NDF__SZTYP + 1 ];
const char *dom = NULL;
const char *keyword;
const char *latsys = NULL;
const char *lonsys = NULL;
double *pd;
double dlbnd[3];
double dubnd[3];
double gcen[3];
double lbnd_in[3];
double lbnd_out[3];
double ubnd_in[3];
double ubnd_out[3];
float *pf;
int *created_tiles = NULL;
int *tiles;
int axlat;
int axlon;
int axspec;
int bbox[ 6 ];
int i;
int ifrm;
int igrid;
int indfo;
int indfs;
int indfx;
int inperm[3];
int ipixel;
int ishpx;
int isxph;
int itile;
int ix;
int iy;
int iz;
int junk;
int latax = -1;
int lbnd[3];
int lbnd_tile[ 3 ];
int lbndx[ NDF__MXDIM ];
int lonax = -1;
int nbase;
int ndim;
int ndimx;
int nfrm;
int nsig;
int ntiles;
int olbnd[ 3 ];
int oubnd[ 3 ];
int outperm[ 3 ];
int place;
int qual;
int tile_index;
int tile_lbnd[2];
int tile_ubnd[2];
int ubnd[3];
int ubnd_tile[ 3 ];
int ubndx[ NDF__MXDIM ];
int var;
size_t iext;
size_t size;
smfJSATiling tiling;
unsigned char *ipq = NULL;
void *ipd = NULL;
void *ipv = NULL;
/* Initialise */
*ntile = 0;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context. */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Note the used length of the supplied base string. If it ends with
".sdf", reduce it by 4. */
nbase = astChrLen( base );
if( !strcmp( base + nbase - 4, ".sdf" ) ) nbase -= 4;
/* Allocate a buffer large enough to hold the full path for an output NDF. */
path = astMalloc( nbase + 25 );
/* Get the WCS from the NDF. */
kpg1Gtwcs( indf, &iwcs, status );
/* Note if the NDF projection is HPX or XPH. */
ishpx = astChrMatch( astGetC( iwcs, "Projection" ), "HEALPix" );
isxph = astChrMatch( astGetC( iwcs, "Projection" ), "polar HEALPix" );
/* Report an error if the NDFs projection is neither of these. */
if( !ishpx && !isxph && *status == SAI__OK ) {
ndfMsg( "N", indf );
*status = SAI__ERROR;
errRep( "", "The input NDF (^N) does not appear to be gridded "
"on the JSA all-sky pixel grid.", status );
}
/* Get the bounds of the NDF in pixel indices and the the corresponding
double precision GRID bounds (reduce the size of the grid by a small
amount to avoid problems with tiles that are on the edge of the valid sky
regions - astMapRegion can report an error for such tiles). Also store
the GRID coords of the centre. Also count the number of significant
pixel axes. */
ndfBound( indf, 3, lbnd, ubnd, &ndim, status );
nsig = 0;
for( i = 0; i < ndim; i++ ) {
dlbnd[ i ] = 0.5 + 0.1;
dubnd[ i ] = ubnd[ i ] - lbnd[ i ] + 1.5 - 0.1;
gcen[ i ] = 0.5*( dlbnd[ i ] + dubnd[ i ] );
if( ubnd[ i ] > lbnd[ i ] ) nsig++;
}
/* Find the one-based indices of the RA, Dec and spectral axes in the
current Frame of the NDF. */
axlon = 0;
if( astGetI( iwcs, "IsLonAxis(1)" ) ) {
axlon = 1;
lonsys = astGetC( iwcs, "System(1)" );
} else if( astGetI( iwcs, "IsLonAxis(2)" ) ) {
axlon = 2;
lonsys = astGetC( iwcs, "System(2)" );
} else if( ndim == 3 && astGetI( iwcs, "IsLonAxis(3)" ) ) {
axlon = 3;
lonsys = astGetC( iwcs, "System(3)" );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: Cannot find the longitude axis in the "
"input NDF.", status );
}
axlat = 0;
if( astGetI( iwcs, "IsLatAxis(1)" ) ) {
axlat = 1;
latsys = astGetC( iwcs, "System(1)" );
} else if( astGetI( iwcs, "IsLatAxis(2)" ) ) {
axlat = 2;
latsys = astGetC( iwcs, "System(2)" );
} else if( ndim == 3 && astGetI( iwcs, "IsLatAxis(3)" ) ) {
axlat = 3;
latsys = astGetC( iwcs, "System(3)" );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: Cannot find the latitude axis in the "
"input NDF.", status );
}
axspec = 6 - axlon - axlat;
/* Report an error if the spatial axes are not ICRS RA and Dec. */
if( ( lonsys && strcmp( lonsys, "ICRS" ) ) ||
( latsys && strcmp( latsys, "ICRS" ) ) ) {
if( *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", indf );
errRep( "", "smf_jsadicer: The spatial axes in '^N' are not "
"ICRS RA and Dec.", status );
}
}
/* Create a Box describing the region covered by the NDF pixel grid in
GRID coords. */
box = astBox( astGetFrame( iwcs, AST__BASE ), 1, dlbnd, dubnd,
AST__NULL, " " );
/* Map this Box into the current WCS Frame of the NDF. */
region = astMapRegion( box, iwcs, iwcs );
/* If no instrument was specified, we will determine the instrument from
the contexts of the FITS extension. Copy the NDF FITS extension to a
FitsChan. Annul the error if the NDF no FITS extension. */
if( instrument == SMF__INST_NONE && *status == SAI__OK ) {
kpgGtfts( indf, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = NULL;
}
} else {
fc = NULL;
}
/* Get the parameters of the required tiling scheme. */
smf_jsainstrument( NULL, fc, instrument, &tiling, status );
/* Get a list of the JSA tiles touched by the supplied NDF. */
tiles = smf_jsatiles_region( region, &tiling, &ntiles, status );
if( ntiles == 0 && *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: No JSA tiles found touching supplied NDF "
"(programming error).", status );
}
/* Does the input NDF have a Variance component? */
ndfState( indf, "Variance", &var, status );
/* Does the input NDF have a Quality component? */
ndfState( indf, "Quality", &qual, status );
/* Decide on the data type to use: _REAL or _DOUBLE. */
ndfMtype( "_REAL,_DOUBLE", indf, indf, "Data", type, sizeof(type), dtype,
sizeof(dtype), status );
/* Tell the user what is happening. */
msgBlank( status );
msgOutf( "", "Dicing %s into JSA tiles:", status,
( nsig == 2 ) ? "map" : "cube" );
/* Loop round all tiles that overlap the supplied NDF. */
for( itile = 0; itile < ntiles && *status == SAI__OK; itile++ ) {
tile_index = tiles[ itile ];
/* Get the spatial pixel bounds of the current tile within the requested
JSA all-sky projection. Also get the (2D) WCS FrameSet for the tile. */
smf_jsatile( tile_index, &tiling, 0, proj, NULL, &tile_wcs, NULL,
tile_lbnd, tile_ubnd, status );
/* Extract the tile pixel->WCS mapping and WCS Frame. We know the indices
of the required Frames because they are hard-wired in smf_jsatile. */
tile_map = astGetMapping( tile_wcs, 3, 2 );
tile_frm = astGetFrame( tile_wcs, 2 );
/* Find the indices of the grid and pixel frames in the input NDF. */
ipixel = -1;
igrid = astGetI( iwcs, "Base" );
nfrm = astGetI( iwcs, "NFrame" );
for( ifrm = 0; ifrm < nfrm; ifrm++ ) {
dom = astGetC( astGetFrame( iwcs, ifrm + 1 ), "Domain" );
if( astChrMatch( dom, "PIXEL" ) ) ipixel = ifrm + 1;
}
/* If required, extract the pixel->spectral mapping and spectral frame in
the input NDF, and add it in parallel with the above tile mapping. */
if( ndim == 3 ) {
astSetI( iwcs, "Base", ipixel );
tfs = atlFrameSetSplit( iwcs, "DSBSPECTRUM SPECTRUM", NULL,
NULL, status );
astSetI( iwcs, "Base", igrid );
if( tfs ) {
specmap = astGetMapping( tfs, AST__BASE, AST__CURRENT );
specfrm = astGetFrame( tfs, AST__CURRENT );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", indf );
errRep( "", "smf_jsadicer: Cannot find the spectral axis "
"in '^N'.", status );
}
tile_map = (AstMapping *) astCmpMap( tile_map, specmap, 0, " " );
tile_frm = (AstFrame *) astCmpFrame( tile_frm, specfrm, " " );
}
/* Ensure the Epoch is inherited form the input NDF. */
astSetD( tile_frm, "Epoch", astGetD( iwcs, "Epoch" ) );
/* Currently tile axis 1 is RA, axis 2 is Dec and axis 3 (if present) is
spectral. Append a PermMap that re-orders these tile WCS axes to match
those of the NDF. */
outperm[ axlon - 1 ] = 1;
outperm[ axlat - 1 ] = 2;
outperm[ axspec - 1 ] = 3;
inperm[ 0 ] = axlon;
inperm[ 1 ] = axlat;
inperm[ 2 ] = axspec;
tile_map = (AstMapping *) astCmpMap( tile_map, astPermMap( ndim, inperm,
ndim, outperm,
NULL, " " ),
1, " " );
tile_map = astSimplify( tile_map );
/* Also re-order the WCS axes in the tile frame. */
astPermAxes( tile_frm, outperm );
/* We want the zero-based indicies of the input pixel axes corresponding
to ra, dec and spectral. So find the indicies of the pixel axes in the
supplied NDF that are most closely aligned with each WCS axis. */
atlPairAxes( iwcs, NULL, gcen, NULL, inperm, status );
if( inperm[ 0 ] == axlon ) {
lonax = 0;
} else if( inperm[ 1 ] == axlon ) {
lonax = 1;
} else {
lonax = 2;
}
if( inperm[ 0 ] == axlat ) {
latax = 0;
} else if( inperm[ 1 ] == axlat ) {
latax = 1;
} else {
latax = 2;
}
/* To get the mapping from pixel coords in the input NDF to pixel coords
in the output NDF, we invert the above mapping so that it goes from WCS
to pixel, and append it to the end of the NDF pixel->WCS mapping. */
ndf_map = astGetMapping( iwcs, ipixel, AST__CURRENT );
astInvert( tile_map );
p2pmap = (AstMapping *) astCmpMap( ndf_map, tile_map, 1, " " );
p2pmap = astSimplify( p2pmap );
astInvert( tile_map );
/* Show the bounds of the tile within the input NDF. */
msgOutiff( MSG__DEBUG, "", " tile %d has bounds (%d:%d,%d:%d) "
"within the output NDF.", status, tile_index,
tile_lbnd[ 0 ], tile_ubnd[ 0 ], tile_lbnd[ 1 ],
tile_ubnd[ 1 ] );
/* Next job is to find the pixel bounds of the output NDF to create
which will hold data for the current tile. First map the pixel bounds
of the whole tile from output to input. */
lbnd_in[ 0 ] = tile_lbnd[ 0 ] - 0.5;
lbnd_in[ 1 ] = tile_lbnd[ 1 ] - 0.5;
lbnd_in[ 2 ] = lbnd[ 2 ] - 0.5;
ubnd_in[ 0 ] = tile_ubnd[ 0 ] - 0.5;
ubnd_in[ 1 ] = tile_ubnd[ 1 ] - 0.5;
ubnd_in[ 2 ] = ubnd[ 2 ] - 0.5;
astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 1, lbnd_out + 0,
ubnd_out + 0, NULL, NULL );
astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 2, lbnd_out + 1,
ubnd_out + 1, NULL, NULL );
if( ndim == 3 ) astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 3,
lbnd_out + 2, ubnd_out + 2, NULL,
NULL );
lbnd_tile[ 0 ] = floor( lbnd_out[ 0 ] ) + 1;
lbnd_tile[ 1 ] = floor( lbnd_out[ 1 ] ) + 1;
lbnd_tile[ 2 ] = floor( lbnd_out[ 2 ] ) + 1;
ubnd_tile[ 0 ] = floor( ubnd_out[ 0 ] ) + 1;
ubnd_tile[ 1 ] = floor( ubnd_out[ 1 ] ) + 1;
ubnd_tile[ 2 ] = floor( ubnd_out[ 2 ] ) + 1;
/* Show the bounds of the tile within the input NDF. */
msgOutiff( MSG__DEBUG, "", " tile %d has bounds (%d:%d,%d:%d) "
"within the input NDF.", status, tile_index,
lbnd_tile[ 0 ], ubnd_tile[ 0 ], lbnd_tile[ 1 ],
ubnd_tile[ 1 ] );
/* If required, trim the bounds to the extent of the input NDF. */
if( trim ) {
if( lbnd_tile[ 0 ] < lbnd[ 0 ] ) lbnd_tile[ 0 ] = lbnd[ 0 ];
if( lbnd_tile[ 1 ] < lbnd[ 1 ] ) lbnd_tile[ 1 ] = lbnd[ 1 ];
if( lbnd_tile[ 2 ] < lbnd[ 2 ] ) lbnd_tile[ 2 ] = lbnd[ 2 ];
if( ubnd_tile[ 0 ] > ubnd[ 0 ] ) ubnd_tile[ 0 ] = ubnd[ 0 ];
if( ubnd_tile[ 1 ] > ubnd[ 1 ] ) ubnd_tile[ 1 ] = ubnd[ 1 ];
if( ubnd_tile[ 2 ] > ubnd[ 2 ] ) ubnd_tile[ 2 ] = ubnd[ 2 ];
}
/* Check there is some overlap. */
if( lbnd_tile[ 0 ] <= ubnd_tile[ 0 ] &&
lbnd_tile[ 1 ] <= ubnd_tile[ 1 ] &&
lbnd_tile[ 2 ] <= ubnd_tile[ 2 ] ){
/* Now need to check if this section of the input NDF contains any good
values. We also find the bounding box of the good values (within the
input pixel coordinate system). So first obtain and map the required
section of the input NDF. */
ndfSect( indf, ndim, lbnd_tile, ubnd_tile, &indfs, status );
ndfMap( indfs, "Data", type, "Read", &ipd, &junk, status );
if( var ) ndfMap( indfs, "Variance", type, "Read", &ipv, &junk, status );
if( qual ) ndfMap( indfs, "Quality", "_UBYTE", "Read", (void **) &ipq,
&junk, status );
/* Initialise the pixel bounds (within the input NDF) of the box holding
good data values for the current tile. */
bbox[ 0 ] = INT_MAX;
bbox[ 1 ] = INT_MAX;
bbox[ 2 ] = INT_MAX;
bbox[ 3 ] = -INT_MAX;
bbox[ 4 ] = -INT_MAX;
bbox[ 5 ] = -INT_MAX;
/* Loop round all pixels in the section. */
if( *status == SAI__OK ) {
if( !strcmp( type, "_REAL" ) ) {
pf = (float *) ipd;
for( iz = lbnd_tile[ 2 ]; iz <= ubnd_tile[ 2 ]; iz++ ) {
for( iy = lbnd_tile[ 1 ]; iy <= ubnd_tile[ 1 ]; iy++ ) {
for( ix = lbnd_tile[ 0 ]; ix <= ubnd_tile[ 0 ]; ix++ ) {
if( *(pf++) != VAL__BADR ) {
if( ix < bbox[ 0 ] ) bbox[ 0 ] = ix;
if( iy < bbox[ 1 ] ) bbox[ 1 ] = iy;
if( iz < bbox[ 2 ] ) bbox[ 2 ] = iz;
if( ix > bbox[ 3 ] ) bbox[ 3 ] = ix;
if( iy > bbox[ 4 ] ) bbox[ 4 ] = iy;
if( iz > bbox[ 5 ] ) bbox[ 5 ] = iz;
}
}
}
}
} else {
pd = (double *) ipd;
for( iz = lbnd_tile[ 2 ]; iz <= ubnd_tile[ 2 ]; iz++ ) {
for( iy = lbnd_tile[ 1 ]; iy <= ubnd_tile[ 1 ]; iy++ ) {
for( ix = lbnd_tile[ 0 ]; ix <= ubnd_tile[ 0 ]; ix++ ) {
if( *(pd++) != VAL__BADD ) {
if( ix < bbox[ 0 ] ) bbox[ 0 ] = ix;
if( iy < bbox[ 1 ] ) bbox[ 1 ] = iy;
if( iz < bbox[ 2 ] ) bbox[ 2 ] = iz;
if( ix > bbox[ 3 ] ) bbox[ 3 ] = ix;
if( iy > bbox[ 4 ] ) bbox[ 4 ] = iy;
if( iz > bbox[ 5 ] ) bbox[ 5 ] = iz;
}
}
}
}
}
/* Skip empty tiles. */
if( bbox[ 0 ] != INT_MAX ) {
msgOutf( "", " tile %d", status, tile_index );
/* If required, trim the bounds to the edges of the bounding box. */
if( trim >= 2 ) {
olbnd[ 0 ] = bbox[ 0 ];
olbnd[ 1 ] = bbox[ 1 ];
olbnd[ 2 ] = bbox[ 2 ];
oubnd[ 0 ] = bbox[ 3 ];
oubnd[ 1 ] = bbox[ 4 ];
oubnd[ 2 ] = bbox[ 5 ];
} else {
olbnd[ 0 ] = lbnd_tile[ 0 ];
olbnd[ 1 ] = lbnd_tile[ 1 ];
olbnd[ 2 ] = lbnd_tile[ 2 ];
oubnd[ 0 ] = ubnd_tile[ 0 ];
oubnd[ 1 ] = ubnd_tile[ 1 ];
oubnd[ 2 ] = ubnd_tile[ 2 ];
}
/* Modify these pixel bounds so that they refer to the output NDF. */
lbnd_in[ 0 ] = olbnd[ 0 ] - 0.5;
lbnd_in[ 1 ] = olbnd[ 1 ] - 0.5;
lbnd_in[ 2 ] = olbnd[ 2 ] - 0.5;
ubnd_in[ 0 ] = oubnd[ 0 ] - 0.5;
ubnd_in[ 1 ] = oubnd[ 1 ] - 0.5;
ubnd_in[ 2 ] = oubnd[ 2 ] - 0.5;
astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 1, lbnd_out + 0,
ubnd_out + 0, NULL, NULL );
astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 2, lbnd_out + 1,
ubnd_out + 1, NULL, NULL );
if( ndim == 3 ) astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 3,
lbnd_out + 2, ubnd_out + 2, NULL,
NULL );
olbnd[ 0 ] = floor( lbnd_out[ 0 ] ) + 1;
olbnd[ 1 ] = floor( lbnd_out[ 1 ] ) + 1;
olbnd[ 2 ] = floor( lbnd_out[ 2 ] ) + 1;
oubnd[ 0 ] = floor( ubnd_out[ 0 ] ) + 1;
oubnd[ 1 ] = floor( ubnd_out[ 1 ] ) + 1;
oubnd[ 2 ] = floor( ubnd_out[ 2 ] ) + 1;
/* Get the full path to the output NDF for the current tile, and create an
NDF placeholder for it. */
sprintf( path, "%.*s_%d", nbase, base, tile_index );
ndfPlace( NULL, path, &place, status );
/* Create a new output NDF by copying the meta-data from the input NDF
section. */
ndfScopy( indfs, "Units", &place, &indfo, status );
/* Set the pixel bounds of the output NDF to the values found above and copy
the input data for the current tile into it. */
smf1_jsadicer( indfo, olbnd, oubnd, tile_map, tile_frm, p2pmap,
ipd, ipv, ipq, status );
/* Add the name of this output NDF to the group holding the names of the
output NDFs that have actually been created. */
if( grp ) grpPut1( grp, path, 0, status );
/* Add a TILENUM header to the output FITS extension. */
kpgGtfts( indfo, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = astFitsChan( NULL, NULL, " " );
/* If the last card is "END", remove it. */
} else {
astSetI( fc, "Card", astGetI( fc, "NCARD" ) );
keyword = astGetC( fc, "CardName" );
if( keyword && !strcmp( keyword, "END" ) ) astDelFits( fc );
}
one_snprintf(jsatile_comment, 45, "JSA all-sky tile index (Nside=%i)",
status, tiling.ntpf);
atlPtfti( fc, "TILENUM", tile_index, jsatile_comment, status );
kpgPtfts( indfo, fc, status );
fc = astAnnul( fc );
/* Now store an STC-S polygon that describes the shortest boundary
enclosing the good data in the output NDF, and store it as an NDF extension. */
kpgPutOutline( indfo, 0.5, 1, status );
/* We now reshape any extension NDFs contained within the output NDF to
have the same spatial bounds as the main NDF (but only for extension
NDFs that originally have the same spatial bounds as the supplied NDF).
Get a group containing paths to all extension NDFs in the output NDF. */
ndgMoreg( indfo, &grpt, &size, status );
/* Loop round each output extension NDF. */
for( iext = 1; iext <= size && *status == SAI__OK; iext++ ) {
ndgNdfas( grpt, iext, "Update", &indfx, status );
/* Get its bounds. */
ndfBound( indfx, NDF__MXDIM, lbndx, ubndx, &ndimx, status );
/* See if this extension NDF has the same bounds on the spatial axes as
the supplied NDF. */
if( ndimx > 1 && lbndx[ lonax ] == lbnd[ lonax ] &&
lbndx[ latax ] == lbnd[ latax ] &&
ubndx[ lonax ] == ubnd[ lonax ] &&
ubndx[ latax ] == ubnd[ latax ] ) {
/* If so, change the bounds of the output extension NDF so that they are
the same as the main NDF on the spatial axes, and map the original
contents of the NDF onto the new pixel grid. */
smf1_jsadicer( indfx, olbnd, oubnd, tile_map, tile_frm, p2pmap,
NULL, NULL, NULL, status );
}
/* Annul the extension NDF identifier. */
ndfAnnul( &indfx, status );
}
/* Free resources associated with the current tile. */
grpDelet( &grpt, status );
ndfAnnul( &indfo, status );
/* Issue warnings about empty tiles. */
} else {
msgOutiff( MSG__VERB, "", " tile %d is empty and so will not be "
"created", status, tile_index );
}
}
/* Free the section of the input NDF. */
ndfAnnul( &indfs, status );
/* Append the index of this tile in the list of tiles to be created. */
created_tiles = astGrow( created_tiles, ++(*ntile),
sizeof( *created_tiles ) );
if( *status == SAI__OK ) created_tiles[ *ntile - 1 ] = tile_index;
} else {
msgOutiff( MSG__DEBUG, "", " Tile %d does not overlap the input "
"NDF after trimming.", status, tile_index );
}
}
msgBlank( status );
/* Write the indicies of the created tiles out to a parameter. */
if( *ntile ) parPut1i( "JSATILELIST", *ntile, created_tiles, status );
/* Free resources. */
created_tiles = astFree( created_tiles );
tiles = astFree( tiles );
path = astFree( path );
/* End the NDF context. */
ndfEnd( status );
/* End the AST context. */
astEnd;
}
smfDetposWcsCache *smf_detpos_wcs( smfHead *hdr, int index, double dut1,
const double telpos[3],
AstFrameSet **fset, smfDetposWcsCache *cache,
int *status ) {
/* Local Variables: */
AstCmpMap *cmap1 = NULL; /* Parallel CmpMap holding both LutMaps */
AstLutMap *latmap = NULL; /* LutMap holding latitude values */
AstLutMap *lonmap = NULL; /* LutMap holding longitude values */
AstMapping *map = NULL; /* GRID->SKY Mapping */
AstSkyFrame *csky = NULL; /* SkyFrame to put in returned FrameSet */
const double *p1; /* Pointer to next lon or lat value to copy */
double *p2; /* Pointer to next lon value */
double *p3; /* Pointer to next lat value */
int i; /* Index of current detector */
int nrec; /* Number of detectors */
int outperm[ 2 ]; /* Axis permutation */
smfDetposWcsCache *result; /* Pointer to returned cache structure */
/* If a negative index was supplied just free the allocated resources and
return. */
if( index < 0 && cache ) {
if( cache->latlut ) cache->latlut = astFree( cache->latlut );
if( cache->lonlut ) cache->lonlut = astFree( cache->lonlut );
if( cache->pmap ) cache->pmap = astAnnul( cache->pmap );
if( cache->grid ) cache->grid = astAnnul( cache->grid );
if( cache->sky ) cache->sky = astAnnul( cache->sky );
cache = astFree( cache );
return NULL;
}
/* Check inherited status */
result = cache;
if( *status != SAI__OK) return result;
/* If no cache structure was supplied, allocate and initialise one now. */
if( !cache ) {
cache = astMalloc( sizeof( *cache ) );
if( cache ) {
cache->latlut = NULL;
cache->lonlut = NULL;
cache->pmap = NULL;
cache->grid = NULL;
cache->sky = NULL;
result = cache;
} else {
*status = SAI__ERROR;
errRep( FUNC_NAME, FUNC_NAME": Can't allocate memory for cache.",
status);
return NULL;
}
}
/* Get the number of detectors. */
nrec = hdr->ndet;
/* Get a pointer to the start of the detpos values for the requested
time slice. */
p1 = hdr->detpos + 2*nrec*index;
/* Check there is more than 1 detector. */
if( nrec > 1 ) {
/* It is possible that we have not allocated enough memory since
this memory is allocated for the first file but subsequent files
may have more receptors. So we use astGrow. */
/* If required, allocate memory to hold the individual look up tables for
lon and lat vaues. */
cache->lonlut = astGrow( cache->lonlut, nrec, sizeof( double ) );
cache->latlut = astGrow( cache->latlut, nrec, sizeof( double ) );
/* Check the memory was allocated succesfully. */
if( cache->lonlut && cache->latlut ) {
/* Copy the lon and lat values for the requested time slice from the
smfHead structure to the local lut arrays. */
p2 = cache->lonlut;
p3 = cache->latlut;
for( i = 0; i < nrec; i++ ) {
*(p2++) = *(p1++);
*(p3++) = *(p1++);
}
/* Create the Mapping from GRID to SKY positions. This is a PermMap to
duplicate the detector index, followed by 2 LutMaps in parallel to
generate the lon and lat values. Set the LutInterpattribute in these
LutMaps so that they use nearest neighbour interpolation. */
lonmap = astLutMap( nrec, cache->lonlut, 1.0, 1.0, "LutInterp=1" );
latmap = astLutMap( nrec, cache->latlut, 1.0, 1.0, "LutInterp=1" );
cmap1 = astCmpMap( lonmap, latmap, 0, " " );
latmap = astAnnul( latmap );
lonmap = astAnnul( lonmap );
if( !cache->pmap ) {
outperm[ 0 ] = 1;
outperm[ 1 ] = 1;
cache->pmap = astPermMap( 2, NULL, 2, outperm, NULL, " " );
astExempt( cache->pmap );
}
map = (AstMapping *) astCmpMap( cache->pmap, cmap1, 1, " " );
cache->pmap = astAnnul( cache->pmap );
cmap1 = astAnnul( cmap1 );
}
/* If thre is only one detector, use a PermMap to describe this one
position. rather than a LutMap (LutMaps cannot describe a single
position). */
} else {
outperm[ 0 ] = -1;
outperm[ 1 ] = -2;
map = (AstMapping *) astPermMap( 2, NULL, 2, outperm, p1, " " );
}
/* Create two Frames to put in the FrameSet. */
if( !cache->grid ) {
cache->grid = astFrame( 2, "Domain=GRID" );
astExempt( cache->grid );
}
if( !cache->sky ) {
cache->sky = astSkyFrame( "System=AzEl" );
astSetD( cache->sky, "ObsLon", -telpos[ 0 ] );
astSetD( cache->sky, "ObsLat", telpos[ 1 ] );
astExempt( cache->sky );
/* If the detpos positions are referred to the TRACKING frame, change
the SkyFrame from AZEL to the AST equivalent of the TRACKING Frame. */
if( !hdr->dpazel ) {
astSetC( cache->sky, "System", sc2ast_convert_system( hdr->state->tcs_tr_sys,
status ) );
}
}
/* Take a copy of the skyframe, and then modify its Epoch attribute. We take a
copy since otherwise all FrameSets returned by this function would share
the same current Frame, and so the attribute change would affect them all.
Always use TCS_TAI. smf_open_file corrects the JCMTState structure
if TCS_TAI is missing. Remember to convert from TAI to TDB (as required by
the Epoch attribute). */
csky = astClone( cache->sky );
astSet( csky, "Epoch=MJD %.*g, dut1=%.*g",
DBL_DIG, hdr->state->tcs_tai + 32.184/SPD,
DBL_DIG, dut1 );
/* Create the FrameSet */
*fset = astFrameSet( cache->grid, " " );
astAddFrame( *fset, AST__BASE, map, csky );
/* Free resources */
map =astAnnul( map );
csky =astAnnul( csky );
/* Exempt the FrameSet pointer from the AST context system rather because
we do not know when, or in which context, it will be used. It will be
annulled either in smf_tslice_ast or in smf_close_file. */
astExempt( *fset );
return result;
}
void smf_coords_lut( smfData *data, int tstep, dim_t itime_lo,
dim_t itime_hi, AstSkyFrame *abskyfrm,
AstMapping *oskymap, int moving, int olbnd[ 2 ],
int oubnd[ 2 ], fts2Port fts_port, int *lut,
double *angle,
double *lon, double *lat, int *status ) {
/* Local Variables */
AstCmpMap *bsmap = NULL; /* Tracking -> output grid Mapping */
AstFrame *trfrm = NULL; /* Tracking Frame */
AstFrameSet *fs = NULL; /* Tracking -> output sky FrameSet */
AstMapping *fullmap = NULL; /* Full Mapping from bolo GRID to output map GRID */
AstMapping *offmap = NULL; /* Mapping from absolute to offset sky coords */
AstMapping *tr2skyabs = NULL;/* Tracking -> output sky Mapping */
AstSkyFrame *offsky = NULL; /* Offset sky frame */
JCMTState *state; /* Pointer to telescope info for time slice */
dim_t ibolo; /* Vector index of bolometer */
dim_t idimx; /* Bolometers per row */
dim_t idimy; /* Bolometers per column */
dim_t ilut; /* Index of LUT element */
dim_t itime0; /* Time slice index at next full calculation */
dim_t itime; /* Time slice index */
dim_t nbolo; /* Total number of bolometers */
double *outmapcoord; /* Array holding output map GRID coords */
double *px; /* Pointer to next output map X GRID coord */
double *py; /* Pointer to next output map Y GRID coord */
double *pgx; /* Pointer to next X output grid coords */
double *pgy; /* Pointer to next Y output grid coords */
double *wgx = NULL; /* Work space to hold X output grid coords */
double *wgy = NULL; /* Work space to hold Y output grid coords */
double bsx0; /* Boresight output map GRID X at previous full calc */
double bsx; /* Boresight output map GRID X at current time slice */
double bsxlast; /* Boresight output map GRID X at previous time slice*/
double bsy0; /* Boresight output map GRID Y at previous full calc */
double bsy; /* Boresight output map GRID Y at current time slice */
double bsylast; /* Boresight output map GRID Y at previous time slice*/
double dx; /* Offset in GRID X from previous full calc */
double dxlast; /* Offset in GRID X from previous time slice */
double dy; /* Offset in GRID Y from previous full calc */
double dylast; /* Offset in GRID Y from previous time slice */
double shift[ 2 ]; /* Shift from PIXEL to GRID in output map */
double x; /* Output GRID X at current bolo in current row */
double xin[ 2 ]; /* Input X values */
double xout[ 2 ]; /* Output X values */
double y; /* Output GRID Y at current bolo in current row */
double yin[ 2 ]; /* Input Y values */
double yout[ 2 ]; /* Output Y values */
int lbnd_in[ 2 ]; /* Lower bounds of input array */
int np; /* Number of positions to transform */
int odimx; /* Output map X dimension in pixels */
int odimy; /* Output map Y dimension in pixels */
int ox; /* Output X GRID index (-1) containing current bolo */
int oy; /* Output Y GRID index (-1) containing current bolo */
int ubnd_in[ 2 ]; /* Upper bounds of input array */
/* Check the inherited status. */
if( *status != SAI__OK ) return;
/* Begin an AST context. */
astBegin;
/* Get the dimensions of the output map. */
odimx = oubnd[ 0 ] - olbnd[ 0 ] + 1;
odimy = oubnd[ 1 ] - olbnd[ 1 ] + 1;
/* Get the dimensions of the bolometer array. */
idimx = (data->dims)[ 0 ];
idimy = (data->dims)[ 1 ];
/* Store integer bounds within the input bolometer GRID system. */
lbnd_in[ 0 ] = 1;
lbnd_in[ 1 ] = 1;
ubnd_in[ 0 ] = idimx;
ubnd_in[ 1 ] = idimy;
/* Determine the number of bolometers. */
nbolo = idimx*idimy;
/* Initialise the index of the next LUT element to write. */
ilut = 0;
/* Ensure tstep is at least one. */
if( tstep < 1 ) tstep = 1;
/* Get the time slice index at which to do the next full calculation. */
itime0 = itime_lo;
/* We only need the following AST objects if we will be approximating
some caclulations. */
if( tstep > 1 ) {
/* We need to find the first good TCS index in order to get the
tracking system (Which for SCUBA-2 won't be changing in the sequence) */
itime0 = VAL__BADI;
for (itime = itime_lo; itime <= itime_hi; itime++) {
JCMTState * slice = &((data->hdr->allState)[itime]);
if (!(slice->jos_drcontrol >= 0 && slice->jos_drcontrol & DRCNTRL__POSITION)) {
itime0 = itime;
break;
}
}
if ((int)itime0 != VAL__BADI) {
/* We need a Frame describing absolute tracking system coords. Take a
copy of the supplied skyframe (to inherit obslat, obslon, epoch,
etc), and then set its system to the tracking system. */
trfrm = astCopy( abskyfrm );
astSetC( trfrm, "System",
sc2ast_convert_system( (data->hdr->allState)[itime0].tcs_tr_sys,
status ) );
/* Get the Mapping from the tracking system to the output (absolute, since
abskyfrm is absolute) sky system. */
fs = astConvert( trfrm, abskyfrm, " " );
if( !fs && *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( " ", "smf_coords_lut: Failed to convert from "
"tracking system to output WCS system.", status );
}
tr2skyabs = astSimplify( astGetMapping( fs, AST__BASE, AST__CURRENT ) );
/* For moving targets, we also need a Frame describing offset sky
coordinates in the output map, in which the reference point is the
current telescope base position. This will involve changing the
SkyRef attribute of the Frame for every time slice, so take a
copy of the supplied SkyFrame to avoid changing it. */
if( moving ) {
offsky = astCopy( abskyfrm );
astSet( offsky, "SkyRefIs=Origin" );
}
/* Create the Mapping from offsets within the output map sky coordinate
system output to map GRID coords to output map GRID coords. This uses a
ShiftMap to convert from output PIXEL coords (produced by "oskymap") to
output GRID coords. Note, if the target is moving, "oskymap" maps from
sky *offsets* to output map PIXEL coords. */
shift[ 0 ] = 1.5 - olbnd[ 0 ];
shift[ 1 ] = 1.5 - olbnd[ 1 ];
bsmap = astCmpMap( oskymap, astShiftMap( 2, shift, " " ), 1, " " );
} else {
/* We did not find any good TCS data so force us into tstep==1
case and end up with VAL__BADI for every element. */
tstep = 1;
itime0 = itime_lo;
msgOutiff(MSG__VERB, "", "All time slices from %zu -- %zu had bad TCS data.",
status, (size_t)itime_lo, (size_t)itime_hi );
}
}
/* Allocate memory to hold the (x,y) output map grid coords at each bolo
for a single time slice. */
outmapcoord = astMalloc( sizeof( *outmapcoord )*2*nbolo );
/* Initialise boresight position for the benefit of the tstep == 1 case. */
bsx = bsy = 0.0;
bsx0 = bsy0 = AST__BAD;
bsxlast = bsylast = AST__BAD;
/* If lon and lat arrays are to be returned, allocate memory to hold the grid
coords of every bolometer for a single sample. */
if( lon && lat ) {
wgx = astMalloc( nbolo*sizeof( *wgx ) );
wgy = astMalloc( nbolo*sizeof( *wgy ) );
}
/* Loop round each time slice. */
state = data->hdr->allState + itime_lo;
for( itime = itime_lo; itime <= itime_hi && *status == SAI__OK;
itime++,state++ ) {
/* No need to get the boresight position if we are doing full
calculations at every time slice. If this time slice has bad
TCS data then the problem will be caught in smf_rebin_totmap. */
if( tstep > 1 ) {
/* Transform the current boresight and base (if moving) positions from
tracking coords to absolute output map sky coords. */
xin[ 0 ] = state->tcs_tr_ac1;
yin[ 0 ] = state->tcs_tr_ac2;
if( moving ) {
xin[ 1 ] = state->tcs_tr_bc1;
yin[ 1 ] = state->tcs_tr_bc2;
np = 2;
} else {
np = 1;
}
astTran2( tr2skyabs, np, xin, yin, 1, xout, yout );
/* If the target is moving, find the offsets within the output map sky
coordinate system, from base to boresight at the current time slice.
These offsets become the new "boresight" position (in xin/yin). Guard
against assigning bad values to the ref pos, which can cause AST to
report errors. */
if( moving && xout[ 1 ] != AST__BAD && yout[ 1 ] != AST__BAD ) {
/* Set the current telescope base position as the reference point in
"offsky". Then get the Mapping from absolute to offset sky coords. */
astSetD( offsky, "SkyRef(1)", xout[ 1 ] );
astSetD( offsky, "SkyRef(2)", yout[ 1 ] );
offmap = astSkyOffsetMap( offsky );
/* Use this Mapping to convert the current boresight position from
absolute sky coords to offsets from the current base position. */
astTran2( offmap, 1, xout, yout, 1, xin, yin );
/* Annul the Mapping to avoid keep the number of AST objects to a minimum. */
offmap = astAnnul( offmap );
/* If the target is stationary, we can just use the absolute boresight
position as it is. */
} else {
xin[ 0 ] = xout[ 0 ];
yin[ 0 ] = yout[ 0 ];
}
/* Transform the above boresight position from output map sky coords to output
map GRID coords. */
astTran2( bsmap, 1, xin, yin, 1, &bsx, &bsy );
}
/* If we have reached the next full calculation... */
if( itime == itime0 ) {
/* Calculate the full bolometer to map-pixel transformation for the current
time slice */
fullmap = smf_rebin_totmap( data, itime, abskyfrm, oskymap, moving,
fts_port, status );
/* If succesful, use it to transform every bolometer position from bolo
GRID coords to output map GRID coords. */
if( fullmap ) {
itime0 += tstep;
astTranGrid( fullmap, 2, lbnd_in, ubnd_in, 0.1, 1000000, 1,
2, nbolo, outmapcoord );
fullmap = astAnnul( fullmap );
/* Record the boresight grid coords at this time slice. */
bsx0 = bsx;
bsy0 = bsy;
/* If we cannot determine a full Mapping for this time slice, move the
node to the next time slice (otherwise we would loose all the data to
the next node), and set the boresight position bad to indicate we
have no mapping for this time slice. */
} else {
itime0++;
bsx0 = AST__BAD;
bsy0 = AST__BAD;
}
}
/* Get the offset from the boresight position at the previous full
calculation and the current boresight position, in output map GRID
coords. */
dx = ( bsx != AST__BAD && bsx0 != AST__BAD ) ? bsx - bsx0 : AST__BAD;
dy = ( bsy != AST__BAD && bsy0 != AST__BAD ) ? bsy - bsy0 : AST__BAD;
/* Work out the scan direction based on the GRID offsets between this and
the previous time slice. Angles are calculated using atan2, with values
ranging from -pi to +pi. */
if( angle ) {
double theta = AST__BAD;
dxlast = ( bsx != AST__BAD && bsxlast != AST__BAD ) ?
bsx - bsxlast : AST__BAD;
dylast = ( bsy != AST__BAD && bsylast != AST__BAD ) ?
bsy - bsylast : AST__BAD;
if( dxlast != AST__BAD && dylast != AST__BAD &&
!( !dxlast && !dylast ) ) {
theta = atan2( dylast, dxlast );
}
angle[itime-itime_lo] = theta;
bsxlast = bsx;
bsylast = bsy;
}
/* Initialise pointers to the place to store the final grid coords for
each bolometer. */
pgx = wgx;
pgy = wgy;
/* Loop round all bolometers. */
px = outmapcoord;
py = outmapcoord + nbolo;
for( ibolo = 0; ibolo < nbolo; ibolo++ ){
/* If good, get the x and y output map GRID coords for this bolometer. */
if( dx != AST__BAD && dy != AST__BAD ) {
x = *(px++) + dx;
y = *(py++) + dy;
/* If required, store them so that we can convert them into lon/lat
values later. */
if( pgx && pgy ) {
*(pgx++) = x;
*(pgy++) = y;
}
/* Find the grid indices (minus one) of the output map pixel containing the
mapped bolo grid coords. One is subtracted in order to simplify the
subsequent calculation of the vector index. */
ox = (int) ( x - 0.5 );
oy = (int) ( y - 0.5 );
/* Check it is within the output map */
if( ox >= 0 && ox < odimx && oy >= 0 && oy < odimy ) {
/* Find the 1-dimensional vector index into the output array for this
pixel and store in the next element of the returned LUT. */
lut[ ilut++ ] = ox + oy*odimx;
/* Store a bad value for points that are off the edge of the output map. */
} else {
lut[ ilut++ ] = VAL__BADI;
}
/* If good, store a bad index in the LUT and move on to the next pixel. */
} else {
lut[ ilut++ ] = VAL__BADI;
px++;
py++;
if( pgx && pgy ) {
*(pgx++) = AST__BAD;
*(pgy++) = AST__BAD;
}
}
}
/* If required transform the grid coords into (lon,lat) coords and store in
the relevant elements of the supplied "lon" and "lat" arrays. */
if( wgx && wgy ) {
astTran2( oskymap, nbolo, wgx, wgy, 0, lon + itime*nbolo,
lat + itime*nbolo );
/* Convert from rads to degs. */
pgx = lon + itime*nbolo;
pgy = lat + itime*nbolo;
for( ibolo = 0; ibolo < nbolo; ibolo++ ) {
if( *pgx != AST__BAD && *pgy != AST__BAD ) {
*(pgx++) *= AST__DR2D;
*(pgy++) *= AST__DR2D;
} else {
pgx++;
pgy++;
}
}
}
}
/* To obtain a reasonable value for the first entry of angle, we simply
duplicate the second value. */
if( angle && (itime_hi > itime_lo) ) {
angle[0] = angle[1];
}
/* Free remaining work space. */
outmapcoord = astFree( outmapcoord );
wgx = astFree( wgx );
wgy = astFree( wgy );
/* Export the WCS pointer in the data header since it will be annulled at
a higher level. Note the FrameSet pointer may be null if the last
full calculation was for a slice with bad telescope data. */
if( data->hdr->wcs ) astExport( data->hdr->wcs );
/* End the AST context. */
astEnd;
}
void smf_get_projpar( AstSkyFrame *skyframe, const double skyref[2],
int moving, int autogrid, int nallpos,
const double * allpos, float telres, double map_pa,
double par[7], int * issparse,int *usedefs, int *status ) {
/* Local Variables */
char reflat[ 41 ]; /* Reference latitude string */
char reflon[ 41 ]; /* Reference longitude string */
char usesys[ 41 ]; /* Output skyframe system */
const char *deflat; /* Default for REFLAT */
const char *deflon; /* Default for REFLON */
const double fbpixsize = 6.0; /* Fallback pixel size if we have no other information */
double autorot; /* Autogrid default for CROTA parameter */
double defsize[ 2 ]; /* Default pixel sizes in arc-seconds */
double pixsize[ 2 ]; /* Pixel sizes in arc-seconds */
double refpix[ 2 ]; /* New REFPIX values */
double rdiam; /* Diameter of bounding circle, in rads */
int coin; /* Are all points effectively co-incident? */
int i;
int nval; /* Number of values supplied */
int refine_crpix; /* Should the pixel ref position be updated? */
int sparse = 0; /* Local definition of sparseness */
int udefs = 0; /* Flag for defaults used or not */
/* Check inherited status. */
if( *status != SAI__OK ) return;
/* If the number of supplied positions is 0 or null pointer,
disable autogrid */
if( nallpos == 0 || !allpos ) autogrid = 0;
/* Get the output system */
one_strlcpy( usesys, astGetC( skyframe, "SYSTEM"), sizeof(usesys),
status );
/* Ensure the reference position in the returned SkyFrame is set to the
first telescope base pointing position. */
astSetD( skyframe, "SkyRef(1)", skyref[ 0 ] );
astSetD( skyframe, "SkyRef(2)", skyref[ 1 ] );
/* If the target is moving, ensure the returned SkyFrame represents
offsets from the first telescope base pointing position rather than
absolute coords. */
if( moving ) smf_set_moving( (AstFrame *) skyframe, NULL, status );
/* Set a flag indicating if all the points are co-incident. */
coin = 0;
/* Set the sky axis values at the tangent point. If the target is moving,
the tangent point is at (0,0) (i.e. it is at the origin of the offset
coordinate system). If the target is not moving, the tangent point is
at the position held in "skyref". */
if( par ) {
if( moving ){
par[ 2 ] = 0.0;
par[ 3 ] = 0.0;
} else {
par[ 2 ] = skyref[ 0 ];
par[ 3 ] = skyref[ 1 ];
}
/* If required, calculate the optimal projection parameters. If the target
is moving, these refer to the offset coordinate system centred on the
first time slice base pointing position, with north defined by the
requested output coordinate system. The values found here are used as
dynamic defaults for the environment parameter */
if( autogrid ) {
kpg1Opgrd( nallpos, allpos, strcmp( usesys, "AZEL" ), par, &rdiam,
status );
/* See if all the points are effectively co-incident (i.e. within an Airy
disk). If so, we use default grid parameters that result in a grid of
1x1 spatial pixels. The grid pixel sizes (par[4] and par[5]) are made
larger than the area covered by the points in order to avoid points
spanning two pixels. */
if( rdiam < telres || nallpos < 3 ) {
if( rdiam < 0.1*AST__DD2R/3600.0 ) rdiam = 0.1*AST__DD2R/3600.0;
par[ 0 ] = 0.0;
par[ 1 ] = 0.0;
par[ 4 ] = -rdiam*4;
par[ 5 ] = -par[ 4 ];
par[ 6 ] = 0.0;
coin = 1;
/* If the sky positions are not co-incident, and the automatic grid
determination failed, we cannot use a grid, so warn the user. */
} else if( par[ 0 ] == AST__BAD ) {
msgOutif( MSG__NORM, " ", " Automatic grid determination "
"failed: the detector samples do not form a "
"regular grid.", status );
}
}
/* If autogrid values were not found, use the following fixed default
values. Do not override extenal defaults for pixel size. */
if( !autogrid || ( autogrid && par[ 0 ] == AST__BAD ) ) {
par[ 0 ] = 0.0;
par[ 1 ] = 0.0;
if (par[4] == AST__BAD || par[5] == AST__BAD ) {
par[ 4 ] = (fbpixsize/3600.0)*AST__DD2R;
par[ 5 ] = (fbpixsize/3600.0)*AST__DD2R;
}
par[ 6 ] = map_pa;
}
/* Ensure the default pixel sizes have the correct signs. */
if( par[ 4 ] != AST__BAD ) {
if( !strcmp( usesys, "AZEL" ) ) {
par[ 4 ] = fabs( par[ 4 ] );
} else {
par[ 4 ] = -fabs( par[ 4 ] );
}
par[ 5 ] = fabs( par[ 5 ] );
}
/* See if the output cube is to include a spatial projection, or a sparse
list of spectra. Disabled if the sparse pointer is NULL. */
if (issparse) {
parDef0l( "SPARSE", ( par[ 0 ] == AST__BAD ), status );
parGet0l( "SPARSE", &sparse, status );
}
/* If we are producing an output cube with the XY plane being a spatial
projection, then get the parameters describing the projection, using the
defaults calculated above. */
if( !sparse && *status == SAI__OK ) {
const int ndigits = 8; /* Number of digits for deflat/deflon precision */
/* If the target is moving, display the tracking centre coordinates for
the first time slice. */
if( moving ) {
astClear( skyframe, "SkyRefIs" );
msgBlank( status );
msgSetc( "S1", astGetC( skyframe, "Symbol(1)" ) );
msgSetc( "S2", astGetC( skyframe, "Symbol(2)" ) );
msgOutif( MSG__NORM, " ", " Output sky coordinates are "
"(^S1,^S2) offsets from the (moving)", status );
msgSetc( "S1", astGetC( skyframe, "Symbol(1)" ) );
msgSetc( "S2", astGetC( skyframe, "Symbol(2)" ) );
msgSetc( "SREF", astGetC( skyframe, "SkyRef" ) );
msgOutif( MSG__NORM, " ", " telescope base position, which "
"started at (^S1,^S2) = (^SREF).", status );
astSet( skyframe, "SkyRefIs=Origin" );
}
/* Set up a flag indicating that the default values calculated by autogrid
are being used. */
udefs = 1;
/* Ensure we have usable CRPIX1/2 values */
if( par[ 0 ] == AST__BAD ) par[ 0 ] = 1.0;
if( par[ 1 ] == AST__BAD ) par[ 1 ] = 1.0;
/* Get the crpix1/2 (in the interim GRID frame) to use. Note if the user
specifies any values. These parameters have vpath=default (which is null)
and ppath=dynamic. */
refine_crpix = 0;
parDef0d( "REFPIX1", par[ 0 ], status );
parDef0d( "REFPIX2", par[ 1 ], status );
if( *status == SAI__OK ) {
parGet0d( "REFPIX1", refpix + 0, status );
parGet0d( "REFPIX2", refpix + 1, status );
if( *status == PAR__NULL ) {
errAnnul( status );
refine_crpix = 1;
} else {
par[ 0 ] = refpix[ 0 ];
par[ 1 ] = refpix[ 1 ];
}
}
/* Get the sky coords reference position strings. Use the returned SkyFrame
to format and unformat them. */
if( par[ 2 ] != AST__BAD ) {
int curdigits;
curdigits = astGetI( skyframe, "digits(1)" );
astSetI( skyframe, "digits(1)", ndigits );
deflon = astFormat( skyframe, 1, par[ 2 ] );
astSetI( skyframe, "digits(1)", curdigits );
parDef0c( "REFLON", deflon, status );
} else {
deflon = NULL;
}
if( par[ 3 ] != AST__BAD ) {
int curdigits;
curdigits = astGetI( skyframe, "digits(2)" );
astSetI( skyframe, "digits(2)", ndigits );
deflat = astFormat( skyframe, 2, par[ 3 ] );
astSetI( skyframe, "digits(2)", curdigits );
parDef0c( "REFLAT", deflat, status );
} else {
deflat = NULL;
}
parGet0c( "REFLON", reflon, 40, status );
parGet0c( "REFLAT", reflat, 40, status );
if( *status == SAI__OK ) {
if( ( deflat && strcmp( deflat, reflat ) ) ||
( deflon && strcmp( deflon, reflon ) ) ) udefs = 0;
if( astUnformat( skyframe, 1, reflon, par + 2 ) == 0 && *status == SAI__OK ) {
msgSetc( "REFLON", reflon );
errRep( "", "Bad value supplied for REFLON: '^REFLON'", status );
}
if( astUnformat( skyframe, 2, reflat, par + 3 ) == 0 && *status == SAI__OK ) {
msgSetc( "REFLAT", reflat );
errRep( "", "Bad value supplied for REFLAT: '^REFLAT'", status );
}
/* Ensure the reference position in the returned SkyFrame is set to the
supplied position (which defaults to the first telescope base pointing
position). */
if( !moving ){
astSetD( skyframe, "SkyRef(1)", par[ 2 ] );
astSetD( skyframe, "SkyRef(2)", par[ 3 ] );
}
}
/* Get the user defined spatial pixel size in arcsec (the calibration for
the spectral axis is fixed by the first input data file - see
smf_cubebounds.c). First convert the autogrid values form rads to arcsec
and establish them as the dynamic default for "PIXSIZE". */
nval = 0;
if( par[ 4 ] != AST__BAD || par[ 5 ] != AST__BAD ) {
for ( i = 4; i <= 5; i++ ) {
if ( par[ i ] != AST__BAD ) {
defsize[ nval ] = 0.1*NINT( fabs( par[ i ] )*AST__DR2D*36000.0 );
nval++;
}
}
/* set the dynamic default, handling case where both dimensions
have same default. */
if (nval == 1) {
defsize[1] = defsize[0];
} else if (nval == 2 && defsize[0] == defsize[1]) {
nval = 1;
}
parDef1d( "PIXSIZE", nval, defsize, status );
} else {
/* pick a default in case something odd happens and we have
no other values*/
defsize[ 0 ] = fbpixsize;
defsize[ 1 ] = defsize[ 0 ];
nval = 2;
}
if (*status == SAI__OK) {
pixsize[0] = AST__BAD;
pixsize[1] = AST__BAD;
parGet1d( "PIXSIZE", 2, pixsize, &nval, status );
if (*status == PAR__NULL) {
/* Null just defaults to what we had before */
errAnnul( status );
pixsize[0] = defsize[0];
pixsize[1] = defsize[1];
nval = 2;
}
}
/* If OK, duplicate the first value if only one value was supplied. */
if( *status == SAI__OK ) {
if( nval < 2 ) pixsize[ 1 ] = pixsize[ 0 ];
if( defsize[ 0 ] != pixsize[ 0 ] ||
defsize[ 1 ] != pixsize[ 1 ] ) udefs = 0;
/* Check the values are OK. */
if( pixsize[ 0 ] <= 0 || pixsize[ 1 ] <= 0 ) {
msgSetd( "P1", pixsize[ 0 ] );
msgSetd( "P2", pixsize[ 1 ] );
*status = SAI__ERROR;
errRep( FUNC_NAME, "Invalid pixel sizes (^P1,^P2).", status);
}
/* Convert to rads, and set the correct signs. */
if( par[ 4 ] == AST__BAD || par[ 4 ] < 0.0 ) {
par[ 4 ] = -pixsize[ 0 ]*AST__DD2R/3600.0;
} else {
par[ 4 ] = pixsize[ 0 ]*AST__DD2R/3600.0;
}
if( par[ 5 ] == AST__BAD || par[ 5 ] < 0.0 ) {
par[ 5 ] = -pixsize[ 1 ]*AST__DD2R/3600.0;
} else {
par[ 5 ] = pixsize[ 1 ]*AST__DD2R/3600.0;
}
}
/* Convert the autogrid CROTA value from rads to degs and set as the
dynamic default for parameter CROTA (the position angle of the output
Y axis, in degrees). The get the CROTA value and convert to rads. */
if( par[ 6 ] != AST__BAD ) {
autorot = par[ 6 ]*AST__DR2D;
parDef0d( "CROTA", autorot, status );
} else {
parDef0d( "CROTA", map_pa*AST__DR2D, status );
autorot = AST__BAD;
}
parGet0d( "CROTA", par + 6, status );
if( par[ 6 ] != autorot ) udefs = 0;
par[ 6 ] *= AST__DD2R;
/* If any parameter were given explicit values which differ from the
autogrid default values, then we need to re-calculate the optimal CRPIX1/2
values. We also do this if all the points are effectively co-incident. */
if( ( coin || !udefs ) && autogrid && refine_crpix ) {
par[ 0 ] = AST__BAD;
par[ 1 ] = AST__BAD;
kpg1Opgrd( nallpos, allpos, strcmp( usesys, "AZEL" ), par,
&rdiam, status );
}
/* Display the projection parameters being used. */
smf_display_projpars( skyframe, par, status );
/* Write out the reference grid coords to output parameter PIXREF. */
parPut1d( "PIXREF", 2, par, status );
/* If no grid was found, indicate that no spatial projection will be used. */
} else {
msgBlank( status );
msgOutif( MSG__NORM, " ", " The output will be a sparse array "
"containing a list of spectra.", status );
}
/* If we have a pre-defined spatial projection, indicate that the output
array need not be sparse. */
} else {
sparse = 0;
}
/* Return usedefs if requested */
if( usedefs ) {
*usedefs = udefs;
}
/* Set sparse if requested */
if( issparse ) *issparse = sparse;
}
