C++ (Cpp) at91_add_device_tsadcc Beispiele

Beispiel #1

Datei: board-sam9rlek.c Projekt: Android4SAM/linux-at91

static void __init ek_board_init(void)
{
	/* Serial */
	/* DBGU on ttyS0. (Rx & Tx only) */
	at91_register_uart(0, 0, 0);

	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
	at91_add_device_serial();
	/* USB HS */
	at91_add_device_usba(&ek_usba_udc_data);
	/* I2C */
	at91_add_device_i2c(NULL, 0);
	/* NAND */
	ek_add_device_nand();
	/* SPI */
	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	/* MMC (AT91_MCI Legacy Driver */
	at91_add_device_mmc(0, &at91_mci0_data);
	/* MMC */
	at91_add_device_mci(0, &mci0_data);
	/* LCD Controller */
	at91_add_device_lcdc(&ek_lcdc_data);
	/* AC97 */
	at91_add_device_ac97(&ek_ac97_data);
	/* Touch Screen Controller */
	at91_add_device_tsadcc(&ek_tsadcc_data);
	/* LEDs */
	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	/* Push Buttons */
	ek_add_device_buttons();
}

Beispiel #2

Datei: board-sam9rlek.c Projekt: jiankangshiye/linux-2.6.39-9G45

static void __init ek_board_init(void)
{
	/* Serial */
	at91_add_device_serial();
	/* USB HS */
	at91_add_device_usba(&ek_usba_udc_data);
	/* I2C */
	at91_add_device_i2c(NULL, 0);
	/* NAND */
	ek_add_device_nand();
	/* SPI */
	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	/* MMC */
	at91_add_device_mmc(0, &ek_mmc_data);
	/* LCD Controller */
	at91_add_device_lcdc(&ek_lcdc_data);
	/* AC97 */
	at91_add_device_ac97(&ek_ac97_data);
	/* Touch Screen Controller */
	at91_add_device_tsadcc(&ek_tsadcc_data);
	/* LEDs */
	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	/* Push Buttons */
	ek_add_device_buttons();
}

Beispiel #3

Datei: board-sam9m10g45ek.c Projekt: 0-t/samsung-kernel-msm7x30

static void __init ek_board_init(void)
{
	/* Serial */
	at91_add_device_serial();
	/* USB HS Host */
	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
	/* USB HS Device */
	at91_add_device_usba(&ek_usba_udc_data);
	/* SPI */
	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	/* Ethernet */
	at91_add_device_eth(&ek_macb_data);
	/* NAND */
	ek_add_device_nand();
	/* I2C */
	at91_add_device_i2c(0, NULL, 0);
	/* LCD Controller */
	at91_add_device_lcdc(&ek_lcdc_data);
	/* Touch Screen */
	at91_add_device_tsadcc(&ek_tsadcc_data);
	/* Push Buttons */
	ek_add_device_buttons();
	/* AC97 */
	at91_add_device_ac97(&ek_ac97_data);
	/* LEDs */
	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
}

Beispiel #4

Datei: board-sam9rlek.c Projekt: Blackburn29/PsycoKernel

static void __init ek_board_init(void)
{
	
	at91_add_device_serial();
	
	at91_add_device_usba(&ek_usba_udc_data);
	
	at91_add_device_i2c(NULL, 0);
	
	ek_add_device_nand();
	
	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	
	at91_add_device_mmc(0, &ek_mmc_data);
	
	at91_add_device_lcdc(&ek_lcdc_data);
	
	at91_add_device_ac97(&ek_ac97_data);
	
	at91_add_device_tsadcc(&ek_tsadcc_data);
	
	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	
	ek_add_device_buttons();
}

Beispiel #5

Datei: board-sam9m10g45ek.c Projekt: 22101959/linux-3.8.13

static void __init ek_board_init(void)
{
	/* Serial */
	/* DGBU on ttyS0. (Rx & Tx only) */
	at91_register_uart(0, 0, 0);

	/* USART0 not connected on the -EK board */
	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
	at91_add_device_serial();
	/* USB HS Host */
	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
	/* USB HS Device */
	at91_add_device_usba(&ek_usba_udc_data);
	/* SPI */
	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	/* MMC */
	at91_add_device_mci(0, &mci0_data);
	at91_add_device_mci(1, &mci1_data);
	/* Ethernet */
	at91_add_device_eth(&ek_macb_data);
	/* NAND */
	ek_add_device_nand();
	/* I2C */
	at91_add_device_i2c(0, NULL, 0);
	/* ISI, using programmable clock as ISI_MCK */
	at91_add_device_isi(&isi_data, true);
	/* LCD Controller */
	at91_add_device_lcdc(&ek_lcdc_data);
	/* Touch Screen */
	at91_add_device_tsadcc(&ek_tsadcc_data);
	/* ADC */
	at91_add_device_adc(&ek_adc_data);
	/* Push Buttons */
	ek_add_device_buttons();
	/* AC97 */
	at91_add_device_ac97(&ek_ac97_data);
	/* LEDs */
	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
	/* Other platform devices */
	platform_add_devices(devices, ARRAY_SIZE(devices));
}

Beispiel #6

Datei: board-sam9m10g45ek.c Projekt: curbthepain/android_kernel_us990_rev

static void __init ek_board_init(void)
{
	/*        */
	at91_add_device_serial();
	/*             */
	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
	/*               */
	at91_add_device_usba(&ek_usba_udc_data);
	/*     */
	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	/*     */
	at91_add_device_mci(0, &mci0_data);
	at91_add_device_mci(1, &mci1_data);
	/*          */
	at91_add_device_eth(&ek_macb_data);
	/*      */
	ek_add_device_nand();
	/*     */
	at91_add_device_i2c(0, NULL, 0);
	/*                                          */
	at91_add_device_isi(&isi_data, true);
	/*                */
	at91_add_device_lcdc(&ek_lcdc_data);
	/*              */
	at91_add_device_tsadcc(&ek_tsadcc_data);
	/*              */
	ek_add_device_buttons();
	/*      */
	at91_add_device_ac97(&ek_ac97_data);
	/*      */
	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
	/*                        */
	platform_add_devices(devices, ARRAY_SIZE(devices));
}