int32 main(void)
{
if(platform_init(NULL) != RET_OK)
goto FAIL_TRAP;
if(network_init(ASSIST_SOCK, NULL, NULL) != RET_OK) {
ERR("network_init fail");
goto FAIL_TRAP;
}
NL1;
LOG("-----------------------------------");
LOG("Serial to Ethernet Using AT Command");
LOG("-----------------------------------");
NL2;
atc_init();
alarm_set(2000, dhcp_trigger, 0); //dhcp_auto_start();
while(1) {
atc_run();
alarm_run();
sockwatch_run();
wizpf_led_flicker(WIZ_LED1, 1000); // check loop is running
}
FAIL_TRAP:
wizpf_led_trap(1);
return 0;
}
void init_server(void){
if (atc_init() == -1) {
perror("Could not init");
exit(-1);
}
if (atc_listen(&serverConn) == -1) {
perror("Could not listen");
exit(-1);
}
init_signal_handlers();
}
int main(int argc, char ** argv)
{
init_signal_handler();
atc_init();
init_UI();
init_time();
create_plane();
state.airports_num = get_airports(state.airports);
while(1){
update_state();
draw_UI();
input(wgetch(ui.cmd_log));
}
atc_deinit();
dispose_UI();
return 0;
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main()
{
//uint8_t tx_size[8] = { 2, 2, 2, 2, 2, 2, 2, 2 };
//uint8_t rx_size[8] = { 2, 2, 2, 2, 2, 2, 2, 2 };
//uint8_t mac_addr[6] = {0x00, 0x08, 0xDC, 0x11, 0x22, 0x33};
//uint8_t src_addr[4] = {192, 168, 0, 80};
//uint8_t gw_addr[4] = {192, 168, 0, 1};
//uint8_t sub_addr[4] = {255, 255, 255, 0};
//uint8_t dns_server[4] = {8, 8, 8, 8}; // for Example domain name server
//uint8_t tmp[8];
//int ret;
int i;
#if defined (_MAIN_DEBUG_) && defined (_USE_SDCARD_)
int ret;
#endif
#if defined(F_APP_FTP)
wiz_NetInfo gWIZNETINFO;
#endif
#if defined(F_APP_DHCP) || defined(F_APP_DNS)
S2E_Packet *value = get_S2E_Packet_pointer();
#endif
#if defined(F_APP_DNS)
uint8_t dns_server_ip[4];
#endif
/* External Clock */
CRG_PLL_InputFrequencySelect(CRG_OCLK);
/* Set System init */
SystemInit();
/* UART Init */
UART_StructInit(&UART_InitStructure);
UART_Init(UART_DEBUG,&UART_InitStructure);
/* SysTick_Config */
SysTick_Config((GetSystemClock()/1000));
/* Set WZ_100US Register */
setTIC100US((GetSystemClock()/10000));
//getTIC100US();
//printf(" GetSystemClock: %X, getTIC100US: %X, (%X) \r\n",
// GetSystemClock, getTIC100US(), *(uint32_t *)TIC100US);
LED_Init(LED1);
LED_Init(LED2);
LED_Init(LED3);
LED_Off(LED1);
LED_Off(LED2);
LED_Off(LED3);
g_sdcard_done = 0;
BOOT_Pin_Init();
Board_factory_Init();
EXTI_Configuration();
/* Load Configure Information */
load_S2E_Packet_from_storage();
UART_Configuration();
/* Check MAC Address */
check_mac_address();
Timer0_Configuration();
// ADC initialize
ADC_Init();
#ifdef _MAIN_DEBUG_
uint8_t tmpstr[6] = {0,};
ctlwizchip(CW_GET_ID,(void*)tmpstr);
printf("\r\n============================================\r\n");
printf(" WIZnet %s EVB Demo v%d.%.2d\r\n", tmpstr, VER_H, VER_L);
printf("============================================\r\n");
printf(" WIZwiki Platform based WEBBoot Example\r\n");
printf("============================================\r\n");
#endif
#ifdef __DEF_USED_IC101AG__ //For using IC+101AG
*(volatile uint32_t *)(0x41003068) = 0x64; //TXD0 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x4100306C) = 0x64; //TXD1 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x41003070) = 0x64; //TXD2 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x41003074) = 0x64; //TXD3 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x41003050) = 0x64; //TXE - set PAD strengh and pull-up
#endif
#ifdef __DEF_USED_MDIO__
/* mdio Init */
mdio_init(GPIOB, MDC, MDIO );
/* PHY Link Check via gpio mdio */
while( link() == 0x0 )
{
printf(".");
delay(500);
}
printf("PHY is linked. \r\n");
#else
delay(1000);
delay(1000);
#endif
Mac_Conf();
#if defined(F_APP_DHCP)
if(value->options.dhcp_use) // DHCP
{
uint32_t ret;
uint8_t dhcp_retry = 0;
#ifdef _MAIN_DEBUG_
printf(" - DHCP Client running\r\n");
#endif
DHCP_init(SOCK_DHCP, TX_BUF);
reg_dhcp_cbfunc(w5500_dhcp_assign, w5500_dhcp_assign, w5500_dhcp_conflict);
while(1)
{
ret = DHCP_run();
if(ret == DHCP_IP_LEASED)
{
#ifdef _MAIN_DEBUG_
printf(" - DHCP Success: DHCP Leased time : %ld Sec.\r\n\r\n", getDHCPLeasetime());
#endif
break;
}
else if(ret == DHCP_FAILED)
{
dhcp_retry++;
#ifdef _MAIN_DEBUG_
if(dhcp_retry <= 3) printf(" - DHCP Timeout occurred and retry [%d]\r\n", dhcp_retry);
#endif
}
if(dhcp_retry > 3)
{
#ifdef _MAIN_DEBUG_
printf(" - DHCP Failed\r\n\r\n");
#endif
value->options.dhcp_use = 0;
Net_Conf();
break;
}
do_udp_config(SOCK_CONFIG);
}
}
else // Static
{
Net_Conf();
}
#else
Net_Conf();
#endif
#ifdef _MAIN_DEBUG_
display_Net_Info();
#endif
#if defined(F_APP_ATC)
atc_init(&rxring, &txring);
op_mode = OP_DATA;
#endif
TFTP_init(SOCK_TFTP, socket_buf);
ret = application_update();
printf("[DEBUG] check trigger:%d ret:%d \r\n", get_bootpin_Status(), ret);
if((get_bootpin_Status() == 1) && (ret != TFTP_FAIL)) {
uint32_t tmp;
#if !defined(MULTIFLASH_ENABLE)
tmp = *(volatile uint32_t *)APP_BASE;
#else
tmp = *(volatile uint32_t *)flash.flash_app_base;
#endif
if((tmp & 0xffffffff) != 0xffffffff) {
printf("[DEBUG] application_jump\r\n");
application_jump();
}
}
#ifdef _USE_SDCARD_
// SD card Initialization
ret = mmc_mount();
if(ret <= 0)
{
#ifdef _MAIN_DEBUG_
printf("\r\n - Can't mount SD card: Please Reboot WIZ750WEB Board or Insert SD card\r\n");
#endif
//while(!(ret = mmc_mount()));
}
if(ret > 0)
{
#ifdef _MAIN_DEBUG_
display_SDcard_Info(ret);
#endif
}
#endif
httpServer_init(TX_BUF, RX_BUF, MAX_HTTPSOCK, socknumlist);
#ifdef _USE_WATCHDOG_
reg_httpServer_cbfunc(NVIC_SystemReset, IWDG_ReloadCounter); // Callback: STM32 MCU Reset / WDT Reset (IWDG)
#else
reg_httpServer_cbfunc(NVIC_SystemReset, NULL); // Callback: STM32 MCU Reset
#endif
IO_status_init();
#if defined(F_APP_FTP)
ctlnetwork(CN_GET_NETINFO, (void*) &gWIZNETINFO);
ftpd_init(gWIZNETINFO.ip); // Added by James for FTP
#endif
#ifdef _USE_WATCHDOG_
// IWDG Initialization: STM32 Independent WatchDog
IWDG_Configureation();
#endif
while (1) {
#ifdef _USE_WATCHDOG_
IWDG_ReloadCounter(); // Feed IWDG
#endif
#if defined(F_APP_ATC)
atc_run();
#endif
if(g_op_mode == NORMAL_MODE) {
do_udp_config(SOCK_CONFIG);
} else {
if(TFTP_run() != TFTP_PROGRESS)
g_op_mode = NORMAL_MODE;
}
#if defined(F_APP_DHCP)
if(value->options.dhcp_use)
DHCP_run();
#endif
for(i = 0; i < MAX_HTTPSOCK; i++) httpServer_run(i); // HTTP server handler
#if defined(F_APP_FTP)
ftpd_run(FTP_DBUF);
#endif
#ifdef _USE_WATCHDOG_
IWDG_ReloadCounter(); // Feed IWDG
#endif
}
return 0;
}