/**
* \b test_start
*
* Start semaphore test.
*
* This tests basic counting semaphore operation between two threads.
*
* A semaphore is created with a count of 10. A second thread then
* ensures that it can decrement the semaphore 10 times before
* it can no longer be decremented.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
/* Default to zero failures */
failures = 0;
/* Create sem with count ten for second thread to decrement */
if (atomSemCreate (&sem1, INITIAL_SEM_COUNT) != ATOM_OK) {
ATOMLOG (_STR("Error creating test semaphore 1\n"));
failures++;
}
/* Create sem to receive test-passed notification */
else if (atomSemCreate (&sem2, 0) != ATOM_OK) {
ATOMLOG (_STR("Error creating test semaphore 1\n"));
failures++;
} else {
/* Check that sem2 doesn't already have a positive count */
if (atomSemGet (&sem2, -1) != ATOM_WOULDBLOCK) {
ATOMLOG (_STR("Sem2 already put\n"));
failures++;
}
/* Create second thread */
else if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/*
* The second thread has now been created and will attempt to
* decrement sem1 ten times, then finally check that it cannot
* decrement it any further. If this passes then the second
* thread will post sem2 to notify us that the test has passed.
*/
else {
/* Give the second thread one second to post sem2 */
if (atomSemGet (&sem2, SYSTEM_TICKS_PER_SEC) != ATOM_OK) {
ATOMLOG (_STR("Sem2 not posted\n"));
failures++;
}
}
/* Delete semaphores, test finished */
if (atomSemDelete (&sem1) != ATOM_OK) {
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
if (atomSemDelete (&sem2) != ATOM_OK) {
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++) {
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK) {
ATOMLOG (_STR("StackCheck\n"));
failures++;
} else {
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0) {
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start semaphore test.
*
* This test exercises the semaphore creation and deletion APIs, including
* waking threads blocking on a semaphore if the semaphore is deleted.
* Deletion wakeups are tested twice: once for a thread which is blocking
* with a timeout and once for a thread which is blocking with no timeout.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
uint32_t i;
uint8_t status;
/* Default to zero failures */
failures = 0;
/* Test creation and deletion of semaphores: good values */
for (i = 0; i < 1000; i++)
{
if (atomSemCreate (&sem1, 0) == ATOM_OK)
{
if (atomSemDelete (&sem1) == ATOM_OK)
{
/* Success */
}
else
{
/* Fail */
ATOMLOG (_STR("Error deleting semaphore\n"));
failures++;
break;
}
}
else
{
/* Fail */
ATOMLOG (_STR("Error creating semaphore\n"));
failures++;
break;
}
}
/* Test creation and deletion of semaphores: creation checks */
if (atomSemCreate (NULL, 0) != ATOM_OK)
{
/* Success */
}
else
{
/* Fail */
ATOMLOG (_STR("Bad semaphore creation checks\n"));
failures++;
}
/* Test creation and deletion of semaphores: deletion checks */
if (atomSemDelete (NULL) != ATOM_OK)
{
/* Success */
}
else
{
/* Fail */
ATOMLOG (_STR("Bad semaphore deletion checks\n"));
failures++;
}
/* Test wakeup of threads on semaphore deletion (thread blocking with no timeout) */
if (atomSemCreate (&sem1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test semaphore 1\n"));
failures++;
}
else if (atomSemCreate (&sem2, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test semaphore 2\n"));
failures++;
}
else if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test1_thread_func, 0,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread 1\n"));
failures++;
}
else
{
/*
* We have created two semaphores. sem1 is for the other thread
* to wait on, which we will delete from this thread. We want
* to see that the other thread is woken up if its semaphore
* is deleted. This is indicated through sem2 being posted
* back to us.
*/
/* Wait for the other thread to start blocking on sem1 */
if (atomTimerDelay(SYSTEM_TICKS_PER_SEC) != ATOM_OK)
{
ATOMLOG (_STR("Failed timer delay\n"));
failures++;
}
else
{
/* The other thread will be blocking on sem1 now, delete sem1 */
if (atomSemDelete(&sem1) != ATOM_OK)
{
ATOMLOG (_STR("Failed sem1 delete\n"));
failures++;
}
else
{
/* Sem1 deleted. The thread should now wake up and post sem2. */
if ((status = atomSemGet (&sem2, (5*SYSTEM_TICKS_PER_SEC))) != ATOM_OK)
{
ATOMLOG (_STR("Notify fail (%d)\n"), status);
failures++;
}
else
{
/* Success */
/* Clean up the last remaining semaphore */
if (atomSemDelete (&sem2) != ATOM_OK)
{
ATOMLOG (_STR("Failed sem2 delete\n"));
failures++;
}
}
}
}
}
/* Test wakeup of threads on semaphore deletion (thread blocking with timeout) */
if (atomSemCreate (&sem1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test semaphore 1\n"));
failures++;
}
else if (atomSemCreate (&sem2, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test semaphore 2\n"));
failures++;
}
else if (atomThreadCreate(&tcb[1], TEST_THREAD_PRIO, test2_thread_func, 0,
&test_thread_stack[1][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread 2\n"));
failures++;
}
else
{
/*
* We have created two semaphores. sem1 is for the other thread
* to wait on, which we will delete from this thread. We want
* to see that the other thread is woken up if its semaphore
* is deleted. This is indicated through sem2 being posted
* back to us.
*/
/* Wait for the other thread to start blocking on sem1 */
if (atomTimerDelay(SYSTEM_TICKS_PER_SEC) != ATOM_OK)
{
ATOMLOG (_STR("Failed timer delay\n"));
failures++;
}
else
{
/* The other thread will be blocking on sem1 now, delete sem1 */
if (atomSemDelete(&sem1) != ATOM_OK)
{
ATOMLOG (_STR("Failed sem1 delete\n"));
failures++;
}
else
{
/* Sem1 deleted. The thread should now wake up and post sem2. */
if ((status = atomSemGet (&sem2, (5*SYSTEM_TICKS_PER_SEC))) != ATOM_OK)
{
ATOMLOG (_STR("Notify fail (%d)\n"), status);
failures++;
}
else
{
/* Success */
/* Clean up the last remaining semaphore */
if (atomSemDelete (&sem2) != ATOM_OK)
{
ATOMLOG (_STR("Failed sem2 delete\n"));
failures++;
}
}
}
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start semaphore test.
*
* This tests usage of a semaphore for basic mutual exclusion type
* operation. Note that Atomthreads has a more fully-featured real
* mutex implementation in the mutex module.
*
* The semaphore sem1 is initialised with a count of 1. Whichever
* thread holds this semaphore can then modify the global variable
* "shared_data".
*
* The main thread first takes the "mutex" sem1, then creates a
* second thread. The second thread should block on the sem1 mutex
* until the main thread releases it. The test checks that the
* global "shared_data" is not modified by the second thread
* until the main thread releases the mutex.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
int i;
/* Default to zero failures */
failures = 0;
/* Create sem with count one for mutex purposes */
if (atomSemCreate (&sem1, 1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating test semaphore 1\n"));
failures++;
}
else
{
/* Initialise the shared_data to zero */
shared_data = 0;
/* Take the mutex to ensure only this thread can modify shared_data */
if (atomSemGet (&sem1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error taking mutex\n"));
failures++;
}
/* Create second thread */
else if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[0][0],
TEST_THREAD_STACK_SIZE, TRUE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/*
* The second thread has now been created and should block on
* the "mutex" sem1 (which now has count zero) until we release
* it. We wait a while and check that shared_data has not been
* modified.
*/
for (i = 0; i < 4; i++)
{
/*
* Sleep for a while to give the second thread a chance to
* modify shared_data, thought it shouldn't until we
* release the mutex.
*/
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Check shared data. The second thread always sets it to one. */
if (shared_data != 0)
{
ATOMLOG (_STR("Shared data modified\n"));
failures++;
break;
}
}
/* Check successful so far */
if (failures == 0)
{
/*
* Release the mutex, which will allow the second thread to
* wake and start modifying shared_data.
*/
if (atomSemPut (&sem1) != ATOM_OK)
{
ATOMLOG (_STR("Failed release\n"));
failures++;
}
/*
* Wait a little while then check that shared_data has
* been modified.
*/
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
if (shared_data != 1)
{
ATOMLOG (_STR("Expected modify\n"));
failures++;
}
/*
* Release and take the mutex again a few times to ensure
* that the mutex continues to protect shared_data.
*/
for (i = 0; i < 4; i++)
{
/*
* Take the mutex again, to prevent second thread accessing
* shared_data.
*/
if (atomSemGet (&sem1, SYSTEM_TICKS_PER_SEC) != ATOM_OK)
{
ATOMLOG (_STR("Retake %d\n"), i);
failures++;
break;
}
else
{
/*
* Set shared_data to 0 and wait to ensure that the
* second thread doesn't modify it while we have the
* mutex again.
*/
shared_data = 0;
/* Wait a while to give second thread potential to run */
atomTimerDelay(SYSTEM_TICKS_PER_SEC/4);
/*
* Check that shared_data has not been modified while we
* own the mutex.
*/
if (shared_data != 0)
{
/* Thread is still modifying the data */
ATOMLOG (_STR("Still modifying\n"));
failures++;
break;
}
/*
* Release the mutex, which will allow the second thread to
* wake and start modifying shared_data again.
*/
if (atomSemPut (&sem1) != ATOM_OK)
{
ATOMLOG (_STR("Failed release\n"));
failures++;
}
}
}
}
/* Delete semaphore, test finished */
if (atomSemDelete (&sem1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start mutex test.
*
* Stress-tests mutex Get and Put operations. Four threads are created which are
* continually Getting and Putting the same mutex, with no time delays between
* each Get/Put.
*
* @retval Number of g_failures
*/
uint32_t test_start (void)
{
CRITICAL_STORE;
int finish_cnt;
/* Default to zero g_failures */
g_failures = 0;
/* Create mutex to stress */
if (atomMutexCreate (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error creating mutex\n"));
g_failures++;
}
/* Create sem to receive thread-finished notification */
else if (atomSemCreate (&sem1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error creating sem\n"));
g_failures++;
}
else
{
/* Take ownership of the mutex to ensure all threads wait for now */
if (atomMutexGet (&mutex1, 0) != ATOM_OK)
{
ATOMLOG (_STR("Error taking mutex\n"));
g_failures++;
}
/* Create Thread 1 */
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Create Thread 2 */
if (atomThreadCreate(&tcb[1], TEST_THREAD_PRIO, test_thread_func, 2,
&test_thread_stack[1][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Create Thread 3 */
if (atomThreadCreate(&tcb[2], TEST_THREAD_PRIO, test_thread_func, 3,
&test_thread_stack[2][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Create Thread 4 */
if (atomThreadCreate(&tcb[3], TEST_THREAD_PRIO, test_thread_func, 4,
&test_thread_stack[3][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK)
{
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
/* Release ownership of the mutex to kick the threads off */
if (atomMutexPut (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Error putting mutex\n"));
g_failures++;
}
/*
* All four threads will now be performing Gets/Puts on mutex1.
* When they have finished they will post sem1, so we wait
* until sem1 is posted four times.
*/
finish_cnt = 0;
while (1)
{
/*
* Attempt to Get sem1. When we have managed to get
* the semaphore four times, it must have been posted
* by all four threads.
*/
if (atomSemGet (&sem1, 0) == ATOM_OK)
{
/* Increment our count of finished threads */
finish_cnt++;
/* Check if all four threads have now posted sem1 */
if (finish_cnt == 4)
{
break;
}
}
}
/* Delete OS objects, test finished */
if (atomMutexDelete (&mutex1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
if (atomSemDelete (&sem1) != ATOM_OK)
{
ATOMLOG (_STR("Delete failed\n"));
CRITICAL_START ();
g_failures++;
CRITICAL_END ();
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++)
{
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK)
{
ATOMLOG (_STR("StackCheck\n"));
g_failures++;
}
else
{
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0)
{
ATOMLOG (_STR("StackOverflow %d\n"), thread);
g_failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return g_failures;
}
/**
* \b test_start
*
* Start semaphore test.
*
* With multiple threads blocking on a single semaphore, this test confirms that
* they are woken in order when the semaphore is posted. The correct order for
* waking is that the higher priority threads are woken first, followed by the
* lower priority threads. Where multiple threads of the same priority are
* waiting, the threads are woken in FIFO order (the order in which they started
* waiting on the semaphore).
*
* To test this we create four threads which all wait on a single semaphore.
* One pair of threads are running at high priority, with the other pair at a
* lower priority:
*
* Thread 1: low prio thread A
* Thread 2: low prio thread B
* Thread 3: high prio thread A
* Thread 4: high prio thread B
*
* The threads are forced to start blocking on the same semaphore in the
* above order (the semaphore is initialised with count 0 to ensure any
* threads calling atomSemGet() will block).
*
* We expect to see them woken up in the following order:
* 3, 4, 1, 2
*
* This proves the multiple blocking thread ordering in terms of both
* the priority-queueing and same-priority-FIFO-queueing.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
int i;
/* Default to zero failures */
failures = 0;
/* Create sem with count zero (so that all threads will block) */
if (atomSemCreate (&sem1, 0) != ATOM_OK) {
ATOMLOG (_STR("Error creating test semaphore 1\n"));
failures++;
} else {
/* Create Thread 1 (lower priority thread A) */
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO+1, test_thread_func, 1,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the semaphore */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Create Thread 2 (lower priority thread B) */
if (atomThreadCreate(&tcb[1], TEST_THREAD_PRIO+1, test_thread_func, 2,
&test_thread_stack[1][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the semaphore */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Create Thread 3 (higher priority thread A) */
if (atomThreadCreate(&tcb[2], TEST_THREAD_PRIO, test_thread_func, 3,
&test_thread_stack[2][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the semaphore */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Create Thread 4 (higher priority thread B) */
if (atomThreadCreate(&tcb[3], TEST_THREAD_PRIO, test_thread_func, 4,
&test_thread_stack[3][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread\n"));
failures++;
}
/* Delay to ensure the thread will start blocking on the semaphore */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* All four threads will now be blocking on sem1 */
/*
* Initialise wake count, used by threads to determine
* what order they were woken in.
*/
wake_cnt = 0;
/*
* Wake the four threads up in order, leaving some time between
* each wake up for them to deal with global data in a
* thread-safe fashion.
*/
for (i = 0; i < 4; i++) {
/* Post semaphore to wake one of the threads up */
if (atomSemPut (&sem1) != ATOM_OK) {
ATOMLOG (_STR("Post fail\n"));
failures++;
}
/* Sleep to give the thread time to manipulate global data */
atomTimerDelay (SYSTEM_TICKS_PER_SEC / 4);
}
/* All four threads now woken up, check they woke in correct order */
if ((wake_order[0] != 3) || (wake_order[1] != 4)
|| (wake_order[2] != 1) || (wake_order[3] != 2)) {
ATOMLOG (_STR("Bad order %d,%d,%d,%d\n"),
wake_order[0], wake_order[1], wake_order[2], wake_order[3]);
failures++;
}
/* Delete semaphore, test finished */
if (atomSemDelete (&sem1) != ATOM_OK) {
ATOMLOG (_STR("Delete failed\n"));
failures++;
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++) {
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK) {
ATOMLOG (_STR("StackCheck\n"));
failures++;
} else {
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0) {
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
/**
* \b test_start
*
* Start semaphore test.
*
* This test verifies the semaphore deletion API, by deleting a semaphore
* on which multiple threads are blocking, and checking that all three
* are woken up with an appropriate error code.
*
* @retval Number of failures
*/
uint32_t test_start (void)
{
int failures;
int i;
/* Default to zero failures */
failures = 0;
/* Initialise pass status for all three threads to FALSE */
for (i = 0; i < 3; i++) {
pass_flag[i] = FALSE;
}
/* Test wakeup of three threads on semaphore deletion */
if (atomSemCreate (&sem1, 0) != ATOM_OK) {
ATOMLOG (_STR("Error creating test semaphore 1\n"));
failures++;
}
else {
/* Create test thread 1 */
if (atomThreadCreate(&tcb[0], TEST_THREAD_PRIO, test_thread_func, 0,
&test_thread_stack[0][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread 1\n"));
failures++;
}
/* Create test thread 2 */
else if (atomThreadCreate(&tcb[1], TEST_THREAD_PRIO, test_thread_func, 1,
&test_thread_stack[1][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread 2\n"));
failures++;
}
/* Create test thread 3 */
else if (atomThreadCreate(&tcb[2], TEST_THREAD_PRIO, test_thread_func, 2,
&test_thread_stack[2][TEST_THREAD_STACK_SIZE - 1],
TEST_THREAD_STACK_SIZE) != ATOM_OK) {
/* Fail */
ATOMLOG (_STR("Error creating test thread 3\n"));
failures++;
}
/* Test threads now created */
else {
/* Wait a while for threads to start blocking on sem1 */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Delete sem1 now that all three threads should be blocking */
if (atomSemDelete (&sem1) != ATOM_OK) {
ATOMLOG (_STR("Delete fail\n"));
failures++;
} else {
/* Wait a while for all three threads to wake up */
atomTimerDelay (SYSTEM_TICKS_PER_SEC/4);
/* Check that all three threads have passed */
if ((pass_flag[0] != TRUE) || (pass_flag[1] != TRUE) || (pass_flag[2] != TRUE)) {
ATOMLOG (_STR("Thread fail\n"));
failures++;
}
}
}
}
/* Check thread stack usage (if enabled) */
#ifdef ATOM_STACK_CHECKING
{
uint32_t used_bytes, free_bytes;
int thread;
/* Check all threads */
for (thread = 0; thread < NUM_TEST_THREADS; thread++) {
/* Check thread stack usage */
if (atomThreadStackCheck (&tcb[thread], &used_bytes, &free_bytes) != ATOM_OK) {
ATOMLOG (_STR("StackCheck\n"));
failures++;
} else {
/* Check the thread did not use up to the end of stack */
if (free_bytes == 0) {
ATOMLOG (_STR("StackOverflow %d\n"), thread);
failures++;
}
/* Log the stack usage */
#ifdef TESTS_LOG_STACK_USAGE
ATOMLOG (_STR("StackUse:%d\n"), (int)used_bytes);
#endif
}
}
}
#endif
/* Quit */
return failures;
}
