static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
char buf[20];
int len, err;
/* Fill boardinfo structure */
memset(&iv->boardinfo, 0 , sizeof(struct ssb_boardinfo));
len = bcm47xx_nvram_getenv("boardvendor", buf, sizeof(buf));
if (len > 0) {
err = kstrtou16(strim(buf), 0, &iv->boardinfo.vendor);
if (err)
pr_warn("Couldn't parse nvram board vendor entry with value \"%s\"\n",
buf);
}
if (!iv->boardinfo.vendor)
iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
len = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
if (len > 0) {
err = kstrtou16(strim(buf), 0, &iv->boardinfo.type);
if (err)
pr_warn("Couldn't parse nvram board type entry with value \"%s\"\n",
buf);
}
memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
bcm47xx_fill_sprom(&iv->sprom, NULL, false);
if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;
}
static void __init bcm47xx_register_ssb(void)
{
int err;
char buf[100];
struct ssb_mipscore *mcore;
err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb);
if (err)
printk(KERN_WARNING "bcm47xx: someone else already registered"
" a ssb SPROM callback handler (err %d)\n", err);
err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)", err);
mcore = &bcm47xx_bus.ssb.mipscore;
if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
if (strstr(buf, "console=ttyS1")) {
struct ssb_serial_port port;
printk(KERN_DEBUG "Swapping serial ports!\n");
/* swap serial ports */
memcpy(&port, &mcore->serial_ports[0], sizeof(port));
memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
sizeof(port));
memcpy(&mcore->serial_ports[1], &port, sizeof(port));
}
}
}
static void __init bcm47xx_register_ssb(void)
{
int err;
char buf[100];
struct ssb_mipscore *mcore;
err = ssb_bus_ssbbus_register(&bcm47xx_bus.ssb, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)", err);
mcore = &bcm47xx_bus.ssb.mipscore;
if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
if (strstr(buf, "console=ttyS1")) {
struct ssb_serial_port port;
pr_debug("Swapping serial ports!\n");
/* swap serial ports */
memcpy(&port, &mcore->serial_ports[0], sizeof(port));
memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
sizeof(port));
memcpy(&mcore->serial_ports[1], &port, sizeof(port));
}
}
}
/**
* bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader
*
* Some devices may have more than one TRX partition. In such case one of them
* is the main one and another a failsafe one. Bootloader may fallback to the
* failsafe firmware if it detects corruption of the main image.
*
* This function provides info about currently used TRX partition. It's the one
* containing kernel started by the bootloader.
*/
static int bcm47xxpart_bootpartition(void)
{
char buf[4];
int bootpartition;
/* Check CFE environment variable */
if (bcm47xx_nvram_getenv("bootpartition", buf, sizeof(buf)) > 0) {
if (!kstrtoint(buf, 0, &bootpartition))
return bootpartition;
}
return 0;
}
int bcm47xx_nvram_gpio_pin(const char *name)
{
int i, err;
char nvram_var[10];
char buf[30];
for (i = 0; i < 32; i++) {
err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
if (err <= 0)
continue;
err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
if (err <= 0)
continue;
if (!strcmp(name, buf))
return i;
}
return -ENOENT;
}
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
char buf[20];
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
bcm47xx_fill_sprom(&iv->sprom, NULL, false);
if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;
}
int bcm47xx_nvram_gpio_pin(const char *name)
{
int i, err;
char nvram_var[] = "gpioXX";
char buf[NVRAM_MAX_GPIO_VALUE_LEN];
/* TODO: Optimize it to don't call getenv so many times */
for (i = 0; i < NVRAM_MAX_GPIO_ENTRIES; i++) {
err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
if (err <= 0)
continue;
err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
if (err <= 0)
continue;
if (!strcmp(name, buf))
return i;
}
return -ENOENT;
}
static int bgmac_fixed_phy_register(struct bgmac *bgmac)
{
struct fixed_phy_status fphy_status = {
.link = 1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
struct phy_device *phy_dev;
int err;
phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, -1, NULL);
if (!phy_dev || IS_ERR(phy_dev)) {
bgmac_err(bgmac, "Failed to register fixed PHY device\n");
return -ENODEV;
}
err = phy_connect_direct(bgmac->net_dev, phy_dev, bgmac_adjust_link,
PHY_INTERFACE_MODE_MII);
if (err) {
bgmac_err(bgmac, "Connecting PHY failed\n");
return err;
}
bgmac->phy_dev = phy_dev;
return err;
}
static int bgmac_mii_register(struct bgmac *bgmac)
{
struct mii_bus *mii_bus;
struct phy_device *phy_dev;
char bus_id[MII_BUS_ID_SIZE + 3];
int err = 0;
if (bgmac_is_bcm4707_family(bgmac))
return bgmac_fixed_phy_register(bgmac);
mii_bus = mdiobus_alloc();
if (!mii_bus)
return -ENOMEM;
mii_bus->name = "bgmac mii bus";
sprintf(mii_bus->id, "%s-%d-%d", "bgmac", bgmac->core->bus->num,
bgmac->core->core_unit);
mii_bus->priv = bgmac;
mii_bus->read = bgmac_mii_read;
mii_bus->write = bgmac_mii_write;
mii_bus->parent = &bgmac->core->dev;
mii_bus->phy_mask = ~(1 << bgmac->phyaddr);
err = mdiobus_register(mii_bus);
if (err) {
bgmac_err(bgmac, "Registration of mii bus failed\n");
goto err_free_bus;
}
bgmac->mii_bus = mii_bus;
/* Connect to the PHY */
snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
bgmac->phyaddr);
phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(phy_dev)) {
bgmac_err(bgmac, "PHY connection failed\n");
err = PTR_ERR(phy_dev);
goto err_unregister_bus;
}
bgmac->phy_dev = phy_dev;
return err;
err_unregister_bus:
mdiobus_unregister(mii_bus);
err_free_bus:
mdiobus_free(mii_bus);
return err;
}
static void bgmac_mii_unregister(struct bgmac *bgmac)
{
struct mii_bus *mii_bus = bgmac->mii_bus;
mdiobus_unregister(mii_bus);
mdiobus_free(mii_bus);
}
/**************************************************
* BCMA bus ops
**************************************************/
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
static int bgmac_probe(struct bcma_device *core)
{
struct net_device *net_dev;
struct bgmac *bgmac;
struct ssb_sprom *sprom = &core->bus->sprom;
u8 *mac;
int err;
switch (core->core_unit) {
case 0:
mac = sprom->et0mac;
break;
case 1:
mac = sprom->et1mac;
break;
case 2:
mac = sprom->et2mac;
break;
default:
pr_err("Unsupported core_unit %d\n", core->core_unit);
return -ENOTSUPP;
}
if (!is_valid_ether_addr(mac)) {
dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac);
eth_random_addr(mac);
dev_warn(&core->dev, "Using random MAC: %pM\n", mac);
}
/* This (reset &) enable is not preset in specs or reference driver but
* Broadcom does it in arch PCI code when enabling fake PCI device.
*/
bcma_core_enable(core, 0);
/* Allocation and references */
net_dev = alloc_etherdev(sizeof(*bgmac));
if (!net_dev)
return -ENOMEM;
net_dev->netdev_ops = &bgmac_netdev_ops;
net_dev->irq = core->irq;
net_dev->ethtool_ops = &bgmac_ethtool_ops;
bgmac = netdev_priv(net_dev);
bgmac->net_dev = net_dev;
bgmac->core = core;
bcma_set_drvdata(core, bgmac);
/* Defaults */
memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
/* On BCM4706 we need common core to access PHY */
if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
!core->bus->drv_gmac_cmn.core) {
bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
err = -ENODEV;
goto err_netdev_free;
}
bgmac->cmn = core->bus->drv_gmac_cmn.core;
switch (core->core_unit) {
case 0:
bgmac->phyaddr = sprom->et0phyaddr;
break;
case 1:
bgmac->phyaddr = sprom->et1phyaddr;
break;
case 2:
bgmac->phyaddr = sprom->et2phyaddr;
break;
}
bgmac->phyaddr &= BGMAC_PHY_MASK;
if (bgmac->phyaddr == BGMAC_PHY_MASK) {
bgmac_err(bgmac, "No PHY found\n");
err = -ENODEV;
goto err_netdev_free;
}
bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr,
bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
bgmac_err(bgmac, "PCI setup not implemented\n");
err = -ENOTSUPP;
goto err_netdev_free;
}
bgmac_chip_reset(bgmac);
/* For Northstar, we have to take all GMAC core out of reset */
if (bgmac_is_bcm4707_family(bgmac)) {
struct bcma_device *ns_core;
int ns_gmac;
/* Northstar has 4 GMAC cores */
for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) {
/* As Northstar requirement, we have to reset all GMACs
* before accessing one. bgmac_chip_reset() call
* bcma_core_enable() for this core. Then the other
* three GMACs didn't reset. We do it here.
*/
ns_core = bcma_find_core_unit(core->bus,
BCMA_CORE_MAC_GBIT,
ns_gmac);
if (ns_core && !bcma_core_is_enabled(ns_core))
bcma_core_enable(ns_core, 0);
}
}
err = bgmac_dma_alloc(bgmac);
if (err) {
bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
goto err_netdev_free;
}
bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
/* TODO: reset the external phy. Specs are needed */
bgmac_phy_reset(bgmac);
bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
BGMAC_BFL_ENETROBO);
if (bgmac->has_robosw)
bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
err = bgmac_mii_register(bgmac);
if (err) {
bgmac_err(bgmac, "Cannot register MDIO\n");
goto err_dma_free;
}
net_dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
err = register_netdev(bgmac->net_dev);
if (err) {
bgmac_err(bgmac, "Cannot register net device\n");
goto err_mii_unregister;
}
netif_carrier_off(net_dev);
return 0;
err_mii_unregister:
bgmac_mii_unregister(bgmac);
err_dma_free:
bgmac_dma_free(bgmac);
err_netdev_free:
bcma_set_drvdata(core, NULL);
free_netdev(net_dev);
return err;
}
static void bgmac_remove(struct bcma_device *core)
{
struct bgmac *bgmac = bcma_get_drvdata(core);
unregister_netdev(bgmac->net_dev);
bgmac_mii_unregister(bgmac);
netif_napi_del(&bgmac->napi);
bgmac_dma_free(bgmac);
bcma_set_drvdata(core, NULL);
free_netdev(bgmac->net_dev);
}
static struct bcma_driver bgmac_bcma_driver = {
.name = KBUILD_MODNAME,
.id_table = bgmac_bcma_tbl,
.probe = bgmac_probe,
.remove = bgmac_remove,
};
static int __init bgmac_init(void)
{
int err;
err = bcma_driver_register(&bgmac_bcma_driver);
if (err)
return err;
pr_info("Broadcom 47xx GBit MAC driver loaded\n");
return 0;
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
static void bgmac_chip_reset(struct bgmac *bgmac)
{
struct bcma_device *core = bgmac->core;
struct bcma_bus *bus = core->bus;
struct bcma_chipinfo *ci = &bus->chipinfo;
u32 flags;
u32 iost;
int i;
if (bcma_core_is_enabled(core)) {
if (!bgmac->stats_grabbed) {
/* bgmac_chip_stats_update(bgmac); */
bgmac->stats_grabbed = true;
}
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
udelay(1);
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
/* TODO: Clear software multicast filter list */
}
iost = bcma_aread32(core, BCMA_IOST);
if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
iost &= ~BGMAC_BCMA_IOST_ATTACHED;
/* 3GMAC: for BCM4707 & BCM47094, only do core reset at bgmac_probe() */
if (ci->id != BCMA_CHIP_ID_BCM4707 &&
ci->id != BCMA_CHIP_ID_BCM47094) {
flags = 0;
if (iost & BGMAC_BCMA_IOST_ATTACHED) {
flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
if (!bgmac->has_robosw)
flags |= BGMAC_BCMA_IOCTL_SW_RESET;
}
bcma_core_enable(core, flags);
}
/* Request Misc PLL for corerev > 2 */
if (core->id.rev > 2 && !bgmac_is_bcm4707_family(bgmac)) {
bgmac_set(bgmac, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
1000);
}
if (ci->id == BCMA_CHIP_ID_BCM5357 ||
ci->id == BCMA_CHIP_ID_BCM4749 ||
ci->id == BCMA_CHIP_ID_BCM53572) {
struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
u8 et_swtype = 0;
u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
BGMAC_CHIPCTL_1_IF_TYPE_MII;
char buf[4];
if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
if (kstrtou8(buf, 0, &et_swtype))
bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
buf);
et_swtype &= 0x0f;
et_swtype <<= 4;
sw_type = et_swtype;
} else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM5358) {
sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
} else if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) {
sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII |
BGMAC_CHIPCTL_1_SW_TYPE_RGMII;
}
bcma_chipco_chipctl_maskset(cc, 1,
~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
BGMAC_CHIPCTL_1_SW_TYPE_MASK),
sw_type);
}
if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
bcma_awrite32(core, BCMA_IOCTL,
bcma_aread32(core, BCMA_IOCTL) &
~BGMAC_BCMA_IOCTL_SW_RESET);
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
* Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
* BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
* be keps until taking MAC out of the reset.
*/
bgmac_cmdcfg_maskset(bgmac,
~(BGMAC_CMDCFG_TE |
BGMAC_CMDCFG_RE |
BGMAC_CMDCFG_RPI |
BGMAC_CMDCFG_TAI |
BGMAC_CMDCFG_HD |
BGMAC_CMDCFG_ML |
BGMAC_CMDCFG_CFE |
BGMAC_CMDCFG_RL |
BGMAC_CMDCFG_RED |
BGMAC_CMDCFG_PE |
BGMAC_CMDCFG_TPI |
BGMAC_CMDCFG_PAD_EN |
BGMAC_CMDCFG_PF),
BGMAC_CMDCFG_PROM |
BGMAC_CMDCFG_NLC |
BGMAC_CMDCFG_CFE |
BGMAC_CMDCFG_SR(core->id.rev),
false);
bgmac->mac_speed = SPEED_UNKNOWN;
bgmac->mac_duplex = DUPLEX_UNKNOWN;
bgmac_clear_mib(bgmac);
if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0,
BCMA_GMAC_CMN_PC_MTE);
else
bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
bgmac_miiconfig(bgmac);
bgmac_phy_init(bgmac);
netdev_reset_queue(bgmac->net_dev);
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
static void bgmac_chip_reset(struct bgmac *bgmac)
{
u32 cmdcfg_sr;
int i;
if (bgmac_clk_enabled(bgmac)) {
if (!bgmac->stats_grabbed) {
/* bgmac_chip_stats_update(bgmac); */
bgmac->stats_grabbed = true;
}
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
udelay(1);
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
/* TODO: Clear software multicast filter list */
}
if (!(bgmac->feature_flags & BGMAC_FEAT_IDM_MASK))
bgmac_chip_reset_idm_config(bgmac);
/* Request Misc PLL for corerev > 2 */
if (bgmac->feature_flags & BGMAC_FEAT_MISC_PLL_REQ) {
bgmac_set(bgmac, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
bgmac_wait_value(bgmac, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
1000);
}
if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_PHY) {
u8 et_swtype = 0;
u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
BGMAC_CHIPCTL_1_IF_TYPE_MII;
char buf[4];
if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
if (kstrtou8(buf, 0, &et_swtype))
dev_err(bgmac->dev, "Failed to parse et_swtype (%s)\n",
buf);
et_swtype &= 0x0f;
et_swtype <<= 4;
sw_type = et_swtype;
} else if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_EPHYRMII) {
sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RMII |
BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
} else if (bgmac->feature_flags & BGMAC_FEAT_SW_TYPE_RGMII) {
sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII |
BGMAC_CHIPCTL_1_SW_TYPE_RGMII;
}
bgmac_cco_ctl_maskset(bgmac, 1, ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
BGMAC_CHIPCTL_1_SW_TYPE_MASK),
sw_type);
} else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE) {
u32 sw_type = BGMAC_CHIPCTL_4_IF_TYPE_MII |
BGMAC_CHIPCTL_4_SW_TYPE_EPHY;
u8 et_swtype = 0;
char buf[4];
if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
if (kstrtou8(buf, 0, &et_swtype))
dev_err(bgmac->dev, "Failed to parse et_swtype (%s)\n",
buf);
sw_type = (et_swtype & 0x0f) << 12;
} else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII) {
sw_type = BGMAC_CHIPCTL_4_IF_TYPE_RGMII |
BGMAC_CHIPCTL_4_SW_TYPE_RGMII;
}
bgmac_cco_ctl_maskset(bgmac, 4, ~(BGMAC_CHIPCTL_4_IF_TYPE_MASK |
BGMAC_CHIPCTL_4_SW_TYPE_MASK),
sw_type);
} else if (bgmac->feature_flags & BGMAC_FEAT_CC7_IF_TYPE_RGMII) {
bgmac_cco_ctl_maskset(bgmac, 7, ~BGMAC_CHIPCTL_7_IF_TYPE_MASK,
BGMAC_CHIPCTL_7_IF_TYPE_RGMII);
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
* Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
* BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
* be keps until taking MAC out of the reset.
*/
if (bgmac->feature_flags & BGMAC_FEAT_CMDCFG_SR_REV4)
cmdcfg_sr = BGMAC_CMDCFG_SR_REV4;
else
cmdcfg_sr = BGMAC_CMDCFG_SR_REV0;
bgmac_cmdcfg_maskset(bgmac,
~(BGMAC_CMDCFG_TE |
BGMAC_CMDCFG_RE |
BGMAC_CMDCFG_RPI |
BGMAC_CMDCFG_TAI |
BGMAC_CMDCFG_HD |
BGMAC_CMDCFG_ML |
BGMAC_CMDCFG_CFE |
BGMAC_CMDCFG_RL |
BGMAC_CMDCFG_RED |
BGMAC_CMDCFG_PE |
BGMAC_CMDCFG_TPI |
BGMAC_CMDCFG_PAD_EN |
BGMAC_CMDCFG_PF),
BGMAC_CMDCFG_PROM |
BGMAC_CMDCFG_NLC |
BGMAC_CMDCFG_CFE |
cmdcfg_sr,
false);
bgmac->mac_speed = SPEED_UNKNOWN;
bgmac->mac_duplex = DUPLEX_UNKNOWN;
bgmac_clear_mib(bgmac);
if (bgmac->feature_flags & BGMAC_FEAT_CMN_PHY_CTL)
bgmac_cmn_maskset32(bgmac, BCMA_GMAC_CMN_PHY_CTL, ~0,
BCMA_GMAC_CMN_PC_MTE);
else
bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
bgmac_miiconfig(bgmac);
if (bgmac->mii_bus)
bgmac->mii_bus->reset(bgmac->mii_bus);
netdev_reset_queue(bgmac->net_dev);
}
int bgmac_phy_connect_direct(struct bgmac *bgmac)
{
struct fixed_phy_status fphy_status = {
.link = 1,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
struct phy_device *phy_dev;
int err;
phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, -1, NULL);
if (!phy_dev || IS_ERR(phy_dev)) {
dev_err(bgmac->dev, "Failed to register fixed PHY device\n");
return -ENODEV;
}
err = phy_connect_direct(bgmac->net_dev, phy_dev, bgmac_adjust_link,
PHY_INTERFACE_MODE_MII);
if (err) {
dev_err(bgmac->dev, "Connecting PHY failed\n");
return err;
}
return err;
}
EXPORT_SYMBOL_GPL(bgmac_phy_connect_direct);
struct bgmac *bgmac_alloc(struct device *dev)
{
struct net_device *net_dev;
struct bgmac *bgmac;
/* Allocation and references */
net_dev = devm_alloc_etherdev(dev, sizeof(*bgmac));
if (!net_dev)
return NULL;
net_dev->netdev_ops = &bgmac_netdev_ops;
net_dev->ethtool_ops = &bgmac_ethtool_ops;
bgmac = netdev_priv(net_dev);
bgmac->dev = dev;
bgmac->net_dev = net_dev;
return bgmac;
}
EXPORT_SYMBOL_GPL(bgmac_alloc);
int bgmac_enet_probe(struct bgmac *bgmac)
{
struct net_device *net_dev = bgmac->net_dev;
int err;
net_dev->irq = bgmac->irq;
SET_NETDEV_DEV(net_dev, bgmac->dev);
dev_set_drvdata(bgmac->dev, bgmac);
if (!is_valid_ether_addr(net_dev->dev_addr)) {
dev_err(bgmac->dev, "Invalid MAC addr: %pM\n",
net_dev->dev_addr);
eth_hw_addr_random(net_dev);
dev_warn(bgmac->dev, "Using random MAC: %pM\n",
net_dev->dev_addr);
}
/* This (reset &) enable is not preset in specs or reference driver but
* Broadcom does it in arch PCI code when enabling fake PCI device.
*/
bgmac_clk_enable(bgmac, 0);
/* This seems to be fixing IRQ by assigning OOB #6 to the core */
if (!(bgmac->feature_flags & BGMAC_FEAT_IDM_MASK)) {
if (bgmac->feature_flags & BGMAC_FEAT_IRQ_ID_OOB_6)
bgmac_idm_write(bgmac, BCMA_OOB_SEL_OUT_A30, 0x86);
}
bgmac_chip_reset(bgmac);
err = bgmac_dma_alloc(bgmac);
if (err) {
dev_err(bgmac->dev, "Unable to alloc memory for DMA\n");
goto err_out;
}
bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
err = bgmac_phy_connect(bgmac);
if (err) {
dev_err(bgmac->dev, "Cannot connect to phy\n");
goto err_dma_free;
}
net_dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
err = register_netdev(bgmac->net_dev);
if (err) {
dev_err(bgmac->dev, "Cannot register net device\n");
goto err_phy_disconnect;
}
netif_carrier_off(net_dev);
return 0;
err_phy_disconnect:
phy_disconnect(net_dev->phydev);
err_dma_free:
bgmac_dma_free(bgmac);
err_out:
return err;
}
EXPORT_SYMBOL_GPL(bgmac_enet_probe);
void bgmac_enet_remove(struct bgmac *bgmac)
{
unregister_netdev(bgmac->net_dev);
phy_disconnect(bgmac->net_dev->phydev);
netif_napi_del(&bgmac->napi);
bgmac_dma_free(bgmac);
free_netdev(bgmac->net_dev);
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
static int bgmac_probe(struct bcma_device *core)
{
struct net_device *net_dev;
struct bgmac *bgmac;
struct ssb_sprom *sprom = &core->bus->sprom;
u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac;
int err;
/* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
if (core->core_unit > 1) {
pr_err("Unsupported core_unit %d\n", core->core_unit);
return -ENOTSUPP;
}
if (!is_valid_ether_addr(mac)) {
dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac);
eth_random_addr(mac);
dev_warn(&core->dev, "Using random MAC: %pM\n", mac);
}
/* Allocation and references */
net_dev = alloc_etherdev(sizeof(*bgmac));
if (!net_dev)
return -ENOMEM;
net_dev->netdev_ops = &bgmac_netdev_ops;
net_dev->irq = core->irq;
SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops);
bgmac = netdev_priv(net_dev);
bgmac->net_dev = net_dev;
bgmac->core = core;
bcma_set_drvdata(core, bgmac);
/* Defaults */
memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
/* On BCM4706 we need common core to access PHY */
if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
!core->bus->drv_gmac_cmn.core) {
bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
err = -ENODEV;
goto err_netdev_free;
}
bgmac->cmn = core->bus->drv_gmac_cmn.core;
bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
sprom->et0phyaddr;
bgmac->phyaddr &= BGMAC_PHY_MASK;
if (bgmac->phyaddr == BGMAC_PHY_MASK) {
bgmac_err(bgmac, "No PHY found\n");
err = -ENODEV;
goto err_netdev_free;
}
bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr,
bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
bgmac_err(bgmac, "PCI setup not implemented\n");
err = -ENOTSUPP;
goto err_netdev_free;
}
bgmac_chip_reset(bgmac);
/* For Northstar, we have to take all GMAC core out of reset */
if (core->id.id == BCMA_CHIP_ID_BCM4707 ||
core->id.id == BCMA_CHIP_ID_BCM53018) {
struct bcma_device *ns_core;
int ns_gmac;
/* Northstar has 4 GMAC cores */
for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) {
/* As Northstar requirement, we have to reset all GMACs
* before accessing one. bgmac_chip_reset() call
* bcma_core_enable() for this core. Then the other
* three GMACs didn't reset. We do it here.
*/
ns_core = bcma_find_core_unit(core->bus,
BCMA_CORE_MAC_GBIT,
ns_gmac);
if (ns_core && !bcma_core_is_enabled(ns_core))
bcma_core_enable(ns_core, 0);
}
}
err = bgmac_dma_alloc(bgmac);
if (err) {
bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
goto err_netdev_free;
}
bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
/* TODO: reset the external phy. Specs are needed */
bgmac_phy_reset(bgmac);
bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
BGMAC_BFL_ENETROBO);
if (bgmac->has_robosw)
bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
err = bgmac_mii_register(bgmac);
if (err) {
bgmac_err(bgmac, "Cannot register MDIO\n");
goto err_dma_free;
}
err = register_netdev(bgmac->net_dev);
if (err) {
bgmac_err(bgmac, "Cannot register net device\n");
goto err_mii_unregister;
}
netif_carrier_off(net_dev);
netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
return 0;
err_mii_unregister:
bgmac_mii_unregister(bgmac);
err_dma_free:
bgmac_dma_free(bgmac);
err_netdev_free:
bcma_set_drvdata(core, NULL);
free_netdev(net_dev);
return err;
}
