Beispiel #1
0
Datei: 020.c Projekt: n5c/euler
int factorial_digit_sum(int num)
{
	int i;
	struct bignum bnsum = {0}, bnum = {0};
	bnsum.d[0] = 1;
	for (i = 2; i <= num; i++) {
		bnum.d[0] = i;
		bignum_multiply(&bnsum, &bnum);
	}
	return bignum_sum_digits(&bnsum);
}
Beispiel #2
0
/**
 * Divide two bignums by naive long division, producing both a quotient and remainder.
 * quotient = floor(b1/b2), remainder = b1 - quotient * b2. If b1 < b2 the quotient is
 * trivially 0 and remainder is b2.
 */
void bignum_divide(bignum* quotient, bignum* remainder, bignum* b1, bignum* b2) {
    bignum *b2copy = bignum_init(), *b1copy = bignum_init();
    bignum *temp = bignum_init(), *temp2 = bignum_init(), *temp3 = bignum_init();
    bignum* quottemp = bignum_init();
    word carry = 0;
    int n, m, i, j, length = 0;
    unsigned long long factor = 1;
    unsigned long long gquot, gtemp, grem;
    if(bignum_less(b1, b2)) { /* Trivial case, b1/b2 = 0 iff b1 < b2. */
        quotient->length = 0;
        bignum_copy(b1, remainder);
    }
    else if(bignum_iszero(b1)) { /* 0/x = 0.. assuming b2 is nonzero */
        quotient->length = 0;
        bignum_fromint(remainder, 0);
    }
    else if(b2->length == 1) { /* Division by a single limb means we can do simple division */
        if(quotient->capacity < b1->length) {
            quotient->capacity = b1->length;
            quotient->data = realloc(quotient->data, quotient->capacity * sizeof(word));
        }
        for(i = b1->length - 1; i >= 0; i--) {
            gtemp = carry * RADIX + b1->data[i];
            gquot = gtemp / b2->data[0];
            quotient->data[i] = (unsigned)gquot;
            if(quotient->data[i] != 0 && length == 0) length = i + 1;
            carry = gtemp % b2->data[0];
        }
        bignum_fromint(remainder, carry);
        quotient->length = length;
    }
    else { /* Long division is neccessary */
        n = b1->length + 1;
        m = b2->length;
        if(quotient->capacity < n - m) {
            quotient->capacity = n - m;
            quotient->data = realloc(quotient->data, (n - m) * sizeof(word));
        }
        bignum_copy(b1, b1copy);
        bignum_copy(b2, b2copy);
        /* Normalize.. multiply by the divisor by 2 until MSB >= HALFRADIX. This ensures fast
         * convergence when guessing the quotient below. We also multiply the dividend by the
         * same amount to ensure the result does not change. */
        while(b2copy->data[b2copy->length - 1] < HALFRADIX) {
            factor *= 2;
            bignum_imultiply(b2copy, &NUMS[2]);
        }
        if(factor > 1) {
            bignum_fromint(temp, (unsigned)factor);
            bignum_imultiply(b1copy, temp);
        }
        /* Ensure the dividend is longer than the original (pre-normalized) divisor. If it is not
         * we introduce a dummy zero word to artificially inflate it. */
        if(b1copy->length != n) {
            b1copy->length++;
            if(b1copy->length > b1copy->capacity) {
                b1copy->capacity = b1copy->length;
                b1copy->data = realloc(b1copy->data, b1copy->capacity * sizeof(word));
            }
            b1copy->data[n - 1] = 0;
        }
        
        /* Process quotient by long division */
        for(i = n - m - 1; i >= 0; i--) {
            gtemp = RADIX * b1copy->data[i + m] + b1copy->data[i + m - 1];
            gquot = gtemp / b2copy->data[m - 1];
            if(gquot >= RADIX) gquot = UINT_MAX;
            grem = gtemp % b2copy->data[m - 1];
            while(grem < RADIX && gquot * b2copy->data[m - 2] > RADIX * grem + b1copy->data[i + m - 2]) { /* Should not overflow... ? */
                gquot--;
                grem += b2copy->data[m - 1];
            }
            quottemp->data[0] = (unsigned)gquot % RADIX;
            quottemp->data[1] = (gquot / RADIX);
            if(quottemp->data[1] != 0) quottemp->length = 2;
            else quottemp->length = 1;
            bignum_multiply(temp2, b2copy, quottemp);
            if(m + 1 > temp3->capacity) {
                temp3->capacity = m + 1;
                temp3->data = realloc(temp3->data, temp3->capacity * sizeof(word));
            }
            temp3->length = 0;
            for(j = 0; j <= m; j++) {
                temp3->data[j] = b1copy->data[i + j];
                if(temp3->data[j] != 0) temp3->length = j + 1;
            }
            if(bignum_less(temp3, temp2)) {
                bignum_iadd(temp3, b2copy);
                gquot--;
            }
            bignum_isubtract(temp3, temp2);
            for(j = 0; j < temp3->length; j++) b1copy->data[i + j] = temp3->data[j];
            for(j = temp3->length; j <= m; j++) b1copy->data[i + j] = 0;
            quotient->data[i] = (unsigned)gquot;
            if(quotient->data[i] != 0) quotient->length = i;
        }
        
        if(quotient->data[b1->length - b2->length] == 0) quotient->length = b1->length - b2->length;
        else quotient->length = b1->length - b2->length + 1;
        
        /* Divide by factor now to find final remainder */
        carry = 0;
        for(i = b1copy->length - 1; i >= 0; i--) {
            gtemp = carry * RADIX + b1copy->data[i];
            b1copy->data[i] = (unsigned)gtemp/factor;
            if(b1copy->data[i] != 0 && length == 0) length = i + 1;
            carry = (unsigned)gtemp % factor;
        }
        b1copy->length = length;
        bignum_copy(b1copy, remainder);
    }
    bignum_deinit(temp);
    bignum_deinit(temp2);
    bignum_deinit(temp3);
    bignum_deinit(b1copy);
    bignum_deinit(b2copy);
    bignum_deinit(quottemp);
}
Beispiel #3
0
/**
 * Perform an in place multiplication into the source bignum. That is source *= mult
 */
void bignum_imultiply(bignum* source, bignum* mult) {
    bignum* temp = bignum_init();
    bignum_multiply(temp, source, mult);
    bignum_copy(temp, source);
    bignum_deinit(temp);
}
Beispiel #4
0
int main(int argc, const char * argv[]) {
    
    char *p=(char*)malloc(BUF_SIZE*sizeof(char));
    printf("\n请输入选择的大素数p:\n");
    scanf("%s",p);
    bignum *p1 = bignum_init();
    bignum_fromstring(p1, p);
    free(p);
    if(probablePrime(p1, ACCURACY))
    {
        printf("p合理");
        bignum *yz = bignum_init();
        bignum_fromint(yz, 3);
        if (bignum_equal(yz,p1)) {
            printf("但p太小不适用!\n");
            return 1;
        }
    }else{
        printf("p不是素数!\n");
        return 1;
    }
    bignum *p2 = bignum_init();
    bignum *temp = bignum_init();
    bignum_fromint(temp, 1);
    bignum_subtract(p2, p1, temp);
    printf("\n请输入选择的本原元α:\n");
    char *a=(char*)malloc(BUF_SIZE*sizeof(char));
    scanf("%s",a);
    bignum *a1 = bignum_init();
    bignum_fromstring(a1, a);
    free(a);
    printf("\n请输入选择的随机整数d:(2<=d<=p-2)\n");
    char *d=(char*)malloc(BUF_SIZE*sizeof(char));
    scanf("%s",d);
    bignum *d1 = bignum_init();
    bignum_fromstring(d1, d);
    free(d);
    bignum *yz0 = bignum_init();
    bignum_fromint(yz0, 2);
    bignum *yz1 = bignum_init();
    bignum_subtract(yz1, p1, yz0);
    if( (bignum_greater(d1, yz0)||bignum_equal(d1, yz0))&&(bignum_greater(yz1,d1)||bignum_equal(yz1,d1)) )
    {
        printf("d合理");
    }else{
        printf("d不合要求!\n");
        return 1;
    }
    printf("\n请输入您的消息x:\n");
    char *x=(char*)malloc(BUF_SIZE*sizeof(char));
    scanf("%s",x);
    bignum *x1 = bignum_init();
    bignum_fromstring(x1, x);
    free(x);
    printf("\n请输入您选择的k:(2<=k<=p-2且k应与p-1互质)\n");
    char *k=(char*)malloc(BUF_SIZE*sizeof(char));
    scanf("%s",k);
    bignum *k1 = bignum_init();
    bignum_fromstring(k1, k);
    free(k);
    if( (bignum_greater(k1, yz0)||bignum_equal(k1, yz0))&&(bignum_greater(yz1,k1)||bignum_equal(yz1,k1)) )
    {
        bignum *yz2 = bignum_init();
        bignum_gcd(k1, p2, yz2);
        if (!bignum_equal(yz2,temp)) {
            printf("k不合要求!\n");
            return 1;
        }
        printf("k合理");
    }else{
        printf("k不合要求!\n");
        return 1;
    }
    
    
    
    bignum *b1 = bignum_init();
    bignum_modpow(a1,d1,p1,b1);
    printf("\n\n所以\n您生成的公钥(p,α,β)为:\t(");
    bignum_print(p1);
    printf(",");
    bignum_print(a1);
    printf(",");
    bignum_print(b1);
    printf(")\n");
    
    printf("您的私钥为:");
    bignum_print(d1);
    printf("\n");
    printf("您发出的消息(x(r,s))为:\t(");
    bignum_print(x1);
    printf(",(");
    bignum *r1 = bignum_init();
    bignum_modpow(a1,k1,p1,r1);
    bignum_print(r1);
    printf(",");
    bignum *s1=bignum_init();
    bignum_multiply(temp, d1, r1);
    
    bignum *temp2 = bignum_init();
    bignum *x2 = bignum_init();
    bignum_copy(x1, x2);
    while (bignum_less(x2, temp)) {
        bignum *add = bignum_init();
        bignum_copy(p2, add);
        bignum_iadd(x2, add) ;
    }
    bignum_subtract(temp2, x2, temp);
//    printf("\ntemp2:");
//    bignum_print(temp2);
//    printf("\t");
//    bignum_print(x2);
//    printf("\t");
//    bignum_print(temp);
//    printf("\n");
    bignum_inverse(k1, p2, temp);//计算a的逆元result = a^-1 mod m
    bignum_multiply(s1, temp, temp2);
    bignum_imodulate(s1, p2);//source = source % modulus
    bignum_print(s1);
    printf("))\n");
    
    bignum *t0 = bignum_init();
    bignum_modpow(a1,x1,p1,t0);
    bignum *t1 = bignum_init();
    bignum_modpow(b1,r1,p1,t1);
    bignum *t2 = bignum_init();
    bignum_modpow(r1,s1,p1,t2);
    bignum *t3 = bignum_init();
    bignum_multiply(t3, t1, t2);
    bignum_imodulate(t3, p1);
    printf("按t=(α^x)mod p,结果为:");
    bignum_print(t0);
    printf("\n按t=(β^r*r^s)mod p,结果为:");
    bignum_print(t3);
    printf("\n");
    if (bignum_equal(t0, t3)) {
        printf("此签名正确有效~\n\n");
    }else{
        printf("此签名错误无效!\n\n");
    }
}
Beispiel #5
0
/**
 * Main method to demostrate the system. Sets up primes p, q, and proceeds to encode and
 * decode the message given in "text.txt"
 */
int main(void) {
	int i, bytes, len;
	bignum *p = bignum_init(), *q = bignum_init(), *n = bignum_init();
	bignum *phi = bignum_init(), *e = bignum_init(), *d = bignum_init();
	bignum *bbytes = bignum_init(), *shift = bignum_init();
	bignum *temp1 = bignum_init(), *temp2 = bignum_init();
	
	bignum *encoded;
	int *decoded;
	char *buffer;
	FILE* f;
	
	srand(time(NULL));
	
	randPrime(FACTOR_DIGITS, p);
	printf("Got first prime factor, p = ");
	bignum_print(p);
	printf(" ... ");
	getchar();
	
	randPrime(FACTOR_DIGITS, q);
	printf("Got second prime factor, q = ");
	bignum_print(q);
	printf(" ... ");
	getchar();
	
	bignum_multiply(n, p, q);
	printf("Got modulus, n = pq = ");
	bignum_print(n);
	printf(" ... ");
	getchar();
	
	bignum_subtract(temp1, p, &NUMS[1]);
	bignum_subtract(temp2, q, &NUMS[1]);
	bignum_multiply(phi, temp1, temp2); /* phi = (p - 1) * (q - 1) */
	printf("Got totient, phi = ");
	bignum_print(phi);
	printf(" ... ");
	getchar();
	
	randExponent(phi, EXPONENT_MAX, e);
	printf("Chose public exponent, e = ");
	bignum_print(e);
	printf("\nPublic key is (");
	bignum_print(e);
	printf(", ");
	bignum_print(n);
	printf(") ... ");
	getchar();
	
	bignum_inverse(e, phi, d);
	printf("Calculated private exponent, d = ");
	bignum_print(d);
	printf("\nPrivate key is (");
	bignum_print(d);
	printf(", ");
	bignum_print(n);
	printf(") ... ");
	getchar();
	
	/* Compute maximum number of bytes that can be encoded in one encryption */
	bytes = -1;
	bignum_fromint(shift, 1 << 7); /* 7 bits per char */
	bignum_fromint(bbytes, 1);
	while(bignum_less(bbytes, n)) {
		bignum_imultiply(bbytes, shift); /* Shift by one byte, NB: we use bitmask representative so this can actually be a shift... */
		bytes++;
	}

	printf("Opening file \"text.txt\" for reading\n");
	f = fopen("text.txt", "r");
	if(f == NULL) {
		printf("Failed to open file \"text.txt\". Does it exist?\n");
		return EXIT_FAILURE;
	}
	len = readFile(f, &buffer, bytes); /* len will be a multiple of bytes, to send whole chunks */
	
	printf("File \"text.txt\" read successfully, %d bytes read. Encoding byte stream in chunks of %d bytes ... ", len, bytes);
	getchar();
	printf("\n");
	encoded = encodeMessage(len, bytes, buffer, e, n);
	printf("\n\nEncoding finished successfully ... ");
	getchar();
	
	printf("Decoding encoded message ... ");
	getchar();
	printf("\n");
	decoded = decodeMessage(len/bytes, bytes, encoded, d, n);
	printf("\n\nFinished RSA demonstration!");
	
	/* Eek! This is why we shouldn't of calloc'd those! */
	for(i = 0; i < len/bytes; i++) free(encoded[i].data);
	free(encoded);
	free(decoded);
	free(buffer);
	bignum_deinit(p);
	bignum_deinit(q);
	bignum_deinit(n);
	bignum_deinit(phi);
	bignum_deinit(e);
	bignum_deinit(d);
	bignum_deinit(bbytes);
	bignum_deinit(shift);
	bignum_deinit(temp1);
	bignum_deinit(temp2);
	fclose(f);
	
	return EXIT_SUCCESS;
}