void *tx_task(void *arg)
{
sim_t *s = (sim_t *)arg;
size_t samples_populated;
while (1) {
int16_t *tx_buffer_current = s->tx.buffer;
unsigned int buffer_samples_remaining = SAMPLES_PER_BUFFER;
while (buffer_samples_remaining > 0) {
samples_populated = fifo_read(tx_buffer_current,
buffer_samples_remaining,
s);
if (is_fifo_write_ready(s)) {
pthread_cond_signal(&(s->fifo_write_ready));
/*
printf("\rTime = %4.1f", s->time);
s->time += 0.1;
fflush(stdout);
*/
}
// Advance the buffer pointer.
buffer_samples_remaining -= (unsigned int)samples_populated;
tx_buffer_current += (2 * samples_populated);
}
// If there were no errors, transmit the data buffer.
bladerf_sync_tx(s->tx.dev, s->tx.buffer, SAMPLES_PER_BUFFER, NULL, TIMEOUT_MS);
}
}
static inline int dummy_tx(struct bladerf *dev)
{
int status;
const unsigned int buf_len = CAL_BUF_LEN;
uint16_t *buf = (uint16_t*) calloc(2 * buf_len, sizeof(buf[0]));
if (buf == NULL) {
return BLADERF_ERR_MEM;
}
status = bladerf_sync_config(dev, BLADERF_MODULE_TX,
BLADERF_FORMAT_SC16_Q11,
CAL_NUM_BUFS, buf_len,
CAL_NUM_XFERS, CAL_TIMEOUT);
if (status != 0) {
goto error;
}
status = bladerf_sync_tx(dev, buf, buf_len, NULL, CAL_TIMEOUT);
error:
free(buf);
return status;
}
void BladeRfTxComponent::process()
{
//Get a DataSet from the input DataBuffer
DataSet< complex<float> >* readDataSet = NULL;
inBuf_->getReadData(readDataSet);
// Check if we have to append dummy frames, samps must be multiple of 1024
size_t size = readDataSet->data.size();
if (size % BLADERF_SAMPLE_BLOCK_SIZE != 0) {
int num_samps_to_append = BLADERF_SAMPLE_BLOCK_SIZE - (size % BLADERF_SAMPLE_BLOCK_SIZE);
std::vector<std::complex<float> > samples(num_samps_to_append, std::complex<float>(0.0, 0.0));
readDataSet->data.insert(readDataSet->data.end(), samples.begin(), samples.end());
size += num_samps_to_append;
}
// Adjust raw buffer if needed
if (rawSampleBuffer_.data.capacity() < size) rawSampleBuffer_.data.resize(size);
// convert samples to bladeRF format
for (int i = 0; i < size; i++) {
rawSampleBuffer_.data[i].real(0xa000 | (int16_t)((readDataSet->data[i].real()) * 2000));
rawSampleBuffer_.data[i].imag(0x5000 | (int16_t)((readDataSet->data[i].imag()) * 2000));
}
// Write samples to device
int ret = bladerf_sync_tx(device_, &(rawSampleBuffer_.data.front()), size, NULL, BLADERF_SYNC_TIMEOUT_MS);
if (ret != 0) {
throw IrisException("Failed to send samples to device!");
LOG(LERROR) << bladerf_strerror(ret);
}
//Release the DataSet
inBuf_->releaseReadData(readDataSet);
}
static void * exec_tx_task(void *args)
{
bool run;
int status = 0;
struct cal_tx_task *task = (struct cal_tx_task*) args;
MUTEX_LOCK(&task->lock);
run = task->run;
MUTEX_UNLOCK(&task->lock);
while (run && status == 0) {
status = bladerf_sync_tx(task->s->dev, task->samples, CAL_BUF_LEN,
NULL, CAL_TIMEOUT);
MUTEX_LOCK(&task->lock);
run = task->run;
MUTEX_UNLOCK(&task->lock);
}
MUTEX_LOCK(&task->lock);
task->status = status;
MUTEX_UNLOCK(&task->lock);
return NULL;
}
/** [tx_meta_now] */
int sync_tx_meta_now_example(struct bladerf *dev, int16_t *samples,
unsigned int num_samples, unsigned int tx_count,
unsigned int timeout_ms)
{
int status = 0;
struct bladerf_metadata meta;
unsigned int i;
memset(&meta, 0, sizeof(meta));
/* Send entire burst worth of samples in one function call */
meta.flags = BLADERF_META_FLAG_TX_BURST_START |
BLADERF_META_FLAG_TX_NOW |
BLADERF_META_FLAG_TX_BURST_END;
for (i = 0; i < tx_count && status == 0; i++) {
/* Fetch or produce IQ samples...*/
produce_samples(samples, num_samples);
status = bladerf_sync_tx(dev, samples, num_samples, &meta, timeout_ms);
if (status != 0) {
fprintf(stderr, "TX failed: %s\n", bladerf_strerror(status));
} else {
uint64_t curr_ts;
status = bladerf_get_timestamp(dev, BLADERF_MODULE_TX, &curr_ts);
if (status != 0) {
fprintf(stderr, "Failed to get current TX timestamp: %s\n",
bladerf_strerror(status));
} else {
printf("TX'd at approximately t=%016"PRIu64"\n", curr_ts);
}
/* Delay next transmission by approximately 5 ms
*
* This is a very imprecise, "quick and dirty" means to do so in
* cases where no particular intra-burst time is required. */
usleep(5000);
}
}
/* Wait for samples to be TX'd before completing. */
if (status == 0) {
status = bladerf_get_timestamp(dev, BLADERF_MODULE_TX, &meta.timestamp);
if (status != 0) {
fprintf(stderr, "Failed to get current TX timestamp: %s\n",
bladerf_strerror(status));
return status;
} else {
status = wait_for_timestamp(dev, BLADERF_MODULE_TX,
meta.timestamp + 2 * num_samples,
timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to wait for timestamp.\n");
}
}
}
return status;
}
void *tx_task(void *arg)
{
sim_t *s = (sim_t *)arg;
size_t samples_populated;
while (1) {
int16_t *tx_buffer_current = s->tx.buffer;
unsigned int buffer_samples_remaining = SAMPLES_PER_BUFFER;
while (buffer_samples_remaining > 0) {
pthread_mutex_lock(&(s->gps.lock));
while (get_sample_length(s) == 0)
{
pthread_cond_wait(&(s->fifo_read_ready), &(s->gps.lock));
}
// assert(get_sample_length(s) > 0);
samples_populated = fifo_read(tx_buffer_current,
buffer_samples_remaining,
s);
pthread_mutex_unlock(&(s->gps.lock));
pthread_cond_signal(&(s->fifo_write_ready));
#if 0
if (is_fifo_write_ready(s)) {
/*
printf("\rTime = %4.1f", s->time);
s->time += 0.1;
fflush(stdout);
*/
}
else if (is_finished_generation(s))
{
goto out;
}
#endif
// Advance the buffer pointer.
buffer_samples_remaining -= (unsigned int)samples_populated;
tx_buffer_current += (2 * samples_populated);
}
// If there were no errors, transmit the data buffer.
bladerf_sync_tx(s->tx.dev, s->tx.buffer, SAMPLES_PER_BUFFER, NULL, TIMEOUT_MS);
if (is_fifo_write_ready(s)) {
/*
printf("\rTime = %4.1f", s->time);
s->time += 0.1;
fflush(stdout);
*/
}
else if (is_finished_generation(s))
{
goto out;
}
}
out:
return NULL;
}
static void * exec_tx_task(void *args)
{
bool run;
int status = 0;
struct cal_tx_task *task = (struct cal_tx_task*) args;
pthread_mutex_lock(&task->lock);
run = task->run;
pthread_mutex_unlock(&task->lock);
while (run && status == 0) {
status = bladerf_sync_tx(task->dev, task->samples, CAL_BUF_LEN,
NULL, CAL_TIMEOUT);
pthread_mutex_lock(&task->lock);
run = task->run;
pthread_mutex_unlock(&task->lock);
}
pthread_mutex_lock(&task->lock);
task->status = status;
pthread_mutex_unlock(&task->lock);
return NULL;
}
/** [tx_meta_sched] */
int sync_tx_meta_sched_example(struct bladerf *dev,
int16_t *samples, unsigned int num_samples,
unsigned int tx_count, unsigned int samplerate,
unsigned int timeout_ms)
{
int status = 0;
unsigned int i;
struct bladerf_metadata meta;
memset(&meta, 0, sizeof(meta));
/* Send entire burst worth of samples in one function call */
meta.flags = BLADERF_META_FLAG_TX_BURST_START |
BLADERF_META_FLAG_TX_BURST_END;
/* Retrieve the current timestamp so we can schedule our transmission
* in the future. */
status = bladerf_get_timestamp(dev, BLADERF_MODULE_TX, &meta.timestamp);
if (status != 0) {
fprintf(stderr, "Failed to get current TX timestamp: %s\n",
bladerf_strerror(status));
return status;
} else {
printf("Current TX timestamp: %016"PRIu64"\n", meta.timestamp);
}
for (i = 0; i < tx_count && status == 0; i++) {
/* Get sample to transmit... */
produce_samples(samples, num_samples);
/* Schedule burst 5 ms into the future */
meta.timestamp += samplerate / 200;
status = bladerf_sync_tx(dev, samples, num_samples, &meta, timeout_ms);
if (status != 0) {
fprintf(stderr, "TX failed: %s\n", bladerf_strerror(status));
return status;
} else {
printf("TX'd @ t=%016"PRIu64"\n", meta.timestamp);
}
}
/* Wait for samples to finish being transmitted. */
if (status == 0) {
meta.timestamp += 2 * num_samples;
status = wait_for_timestamp(dev, BLADERF_MODULE_TX,
meta.timestamp, timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to wait for timestamp.\n");
}
}
return status;
}
int sync_rx_example(struct bladerf *dev)
{
int status, ret;
bool done = false;
bool have_tx_data = false;
/** [user_buffers] */
/* "User" samples buffers and their associated sizes, in units of samples.
* Recall that one sample = two int16_t values. */
int16_t *rx_samples = NULL;
int16_t *tx_samples = NULL;
const unsigned int samples_len = 10000; /* May be any (reasonable) size */
/* Allocate a buffer to store received samples in */
rx_samples = malloc(samples_len * 2 * 1 * sizeof(int16_t));
if (rx_samples == NULL) {
perror("malloc");
return BLADERF_ERR_MEM;
}
/* Allocate a buffer to prepare transmit data in */
tx_samples = malloc(samples_len * 2 * 1 * sizeof(int16_t));
if (tx_samples == NULL) {
perror("malloc");
free(rx_samples);
return BLADERF_ERR_MEM;
}
/** [user_buffers] */
/* Initialize synch interface on RX and TX */
status = init_sync(dev);
if (status != 0) {
goto out;
}
/** [enable_modules] */
status = bladerf_enable_module(dev, BLADERF_RX, true);
if (status != 0) {
fprintf(stderr, "Failed to enable RX: %s\n", bladerf_strerror(status));
goto out;
}
status = bladerf_enable_module(dev, BLADERF_TX, true);
if (status != 0) {
fprintf(stderr, "Failed to enable TX: %s\n", bladerf_strerror(status));
goto out;
}
/** [enable_modules] */
/** [rxtx_loop] */
while (status == 0 && !done) {
/* Receive samples */
status = bladerf_sync_rx(dev, rx_samples, samples_len, NULL, 5000);
if (status == 0) {
/* Process these samples, and potentially produce a response
* to transmit */
done = do_work(rx_samples, samples_len, &have_tx_data, tx_samples,
samples_len);
if (!done && have_tx_data) {
/* Transmit a response */
status =
bladerf_sync_tx(dev, tx_samples, samples_len, NULL, 5000);
if (status != 0) {
fprintf(stderr, "Failed to TX samples: %s\n",
bladerf_strerror(status));
}
}
} else {
fprintf(stderr, "Failed to RX samples: %s\n",
bladerf_strerror(status));
}
}
if (status == 0) {
/* Wait a few seconds for any remaining TX samples to finish
* reaching the RF front-end */
usleep(2000000);
}
/** [rxtx_loop] */
out:
ret = status;
/** [disable_modules] */
/* Disable RX, shutting down our underlying RX stream */
status = bladerf_enable_module(dev, BLADERF_RX, false);
if (status != 0) {
fprintf(stderr, "Failed to disable RX: %s\n", bladerf_strerror(status));
}
/* Disable TX, shutting down our underlying TX stream */
status = bladerf_enable_module(dev, BLADERF_TX, false);
if (status != 0) {
fprintf(stderr, "Failed to disable TX: %s\n", bladerf_strerror(status));
}
/* Free up our resources */
free(rx_samples);
free(tx_samples);
/** [disable_modules] */
return ret;
}
static void * tx_task(void *args)
{
int status;
int16_t *samples;
unsigned int i;
struct bladerf_metadata meta;
uint64_t samples_left;
struct test *t = (struct test *) args;
bool stop = false;
int16_t zeros[] = { 0, 0, 0, 0 };
samples = (int16_t*) malloc(2 * sizeof(samples[0]) * t->params->buf_size);
if (samples == NULL) {
perror("malloc");
return NULL;
}
memset(&meta, 0, sizeof(meta));
for (i = 0; i < (2 * t->params->buf_size); i += 2) {
samples[i] = samples[i + 1] = TX_MAGNITUDE;
}
status = bladerf_get_timestamp(t->dev, BLADERF_MODULE_TX, &meta.timestamp);
if (status != 0) {
fprintf(stderr, "Failed to get current timestamp: %s\n",
bladerf_strerror(status));
}
meta.timestamp += 400000;
for (i = 0; i < t->num_bursts && !stop; i++) {
meta.flags = BLADERF_META_FLAG_TX_BURST_START;
samples_left = t->bursts[i].duration;
assert(samples_left <= UINT_MAX);
if (i != 0) {
meta.timestamp += (t->bursts[i-1].duration + t->bursts[i].gap);
}
while (samples_left != 0 && status == 0) {
unsigned int to_send = uint_min(t->params->buf_size,
(unsigned int) samples_left);
status = bladerf_sync_tx(t->dev, samples, to_send, &meta,
t->params->timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to TX @ burst %-4u with %"PRIu64
" samples left: %s\n",
i + 1, samples_left, bladerf_strerror(status));
/* Stop the RX worker */
pthread_mutex_lock(&t->lock);
t->stop = true;
pthread_mutex_unlock(&t->lock);
}
meta.flags &= ~BLADERF_META_FLAG_TX_BURST_START;
samples_left -= to_send;
}
/* Flush TX samples by ensuring we have 2 zero samples at the end
* of our burst (as required by libbladeRF) */
if (status == 0) {
meta.flags = BLADERF_META_FLAG_TX_BURST_END;
status = bladerf_sync_tx(t->dev, zeros, 2, &meta,
t->params->timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to flush TX: %s\n",
bladerf_strerror(status));
/* Stop the RX worker */
pthread_mutex_lock(&t->lock);
t->stop = true;
pthread_mutex_unlock(&t->lock);
}
}
pthread_mutex_lock(&t->lock);
stop = t->stop;
pthread_mutex_unlock(&t->lock);
}
/* Wait for samples to finish */
printf("TX: Waiting for samples to finish.\n");
fflush(stdout);
status = wait_for_timestamp(t->dev, BLADERF_MODULE_TX,
meta.timestamp + t->bursts[i - 1].duration,
3000);
if (status != 0) {
fprintf(stderr, "Failed to wait for TX to complete: %s\n",
bladerf_strerror(status));
}
free(samples);
printf("TX: Exiting task.\n");
fflush(stdout);
return NULL;
}
/** [tx_meta_update] */
int sync_tx_meta_update_example(struct bladerf *dev,
int16_t *samples, unsigned int num_samples,
unsigned int tx_count, unsigned int samplerate,
unsigned int timeout_ms)
{
int status = 0;
unsigned int i;
struct bladerf_metadata meta;
int16_t zeros[] = { 0, 0, 0, 0 }; /* Two 0+0j samples */
memset(&meta, 0, sizeof(meta));
/* The first call to bladerf_sync_tx() will start our long "burst" at
* a specific timestamp.
*
* In successive calls, we'll break this long "burst" up into shorter bursts
* by using the BLADERF_META_FLAG_TX_UPDATE_TIMESTAMP flag with new
* timestamps. The discontinuities will be zero-padded.
*/
meta.flags = BLADERF_META_FLAG_TX_BURST_START;
/* Retrieve the current timestamp so we can schedule our transmission
* in the future. */
status = bladerf_get_timestamp(dev, BLADERF_MODULE_TX, &meta.timestamp);
if (status != 0) {
fprintf(stderr, "Failed to get current TX timestamp: %s\n",
bladerf_strerror(status));
return status;
} else {
printf("Current TX timestamp: %016"PRIu64"\n", meta.timestamp);
}
/* Start 5 ms in the future */
meta.timestamp += samplerate / 200;
for (i = 0; i < tx_count && status == 0; i++) {
/* Get sample to transmit... */
produce_samples(samples, num_samples);
status = bladerf_sync_tx(dev, samples, num_samples, &meta, timeout_ms);
if (status != 0) {
fprintf(stderr, "TX failed: %s\n", bladerf_strerror(status));
return status;
} else {
printf("TX'd @ t=%016"PRIu64"\n", meta.timestamp);
}
/* Instruct bladerf_sync_tx() to position samples within this burst at
* the specified timestamp. 0+0j will be transmitted up until that
* point. */
meta.flags = BLADERF_META_FLAG_TX_UPDATE_TIMESTAMP;
/* Schedule samples to be transmitted 1.25 ms after the completion of
* the previous burst */
meta.timestamp += num_samples + samplerate / 800;
}
/* End the burst and flush remaining samples. */
meta.flags = BLADERF_META_FLAG_TX_BURST_END;
status = bladerf_sync_tx(dev, zeros, 2, &meta, timeout_ms);
/* Wait for samples to finish being transmitted. */
if (status == 0) {
meta.timestamp += 2 * num_samples;
status = wait_for_timestamp(dev, BLADERF_MODULE_TX,
meta.timestamp, timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to wait for timestamp.\n");
}
} else {
fprintf(stderr, "Failed to complete burst: %s\n",
bladerf_strerror(status));
}
return status;
}
int rf_blade_send_timed(void *h,
void *data,
int nsamples,
time_t secs,
double frac_secs,
bool has_time_spec,
bool blocking,
bool is_start_of_burst,
bool is_end_of_burst)
{
rf_blade_handler_t *handler = (rf_blade_handler_t*) h;
struct bladerf_metadata meta;
int status;
if (!handler->tx_stream_enabled) {
rf_blade_start_tx_stream(h);
}
if (2*nsamples > CONVERT_BUFFER_SIZE) {
fprintf(stderr, "TX failed: nsamples exceeds buffer size (%d>%d)\n", nsamples, CONVERT_BUFFER_SIZE);
return -1;
}
srslte_vec_convert_fi(data, handler->tx_buffer, 2048, 2*nsamples);
memset(&meta, 0, sizeof(meta));
if (is_start_of_burst) {
if (has_time_spec) {
secs_to_timestamps(handler->tx_rate, secs, frac_secs, &meta.timestamp);
} else {
meta.flags |= BLADERF_META_FLAG_TX_NOW;
}
meta.flags |= BLADERF_META_FLAG_TX_BURST_START;
}
if (is_end_of_burst) {
meta.flags |= BLADERF_META_FLAG_TX_BURST_END;
}
srslte_rf_error_t error;
bzero(&error, sizeof(srslte_rf_error_t));
status = bladerf_sync_tx(handler->dev, handler->tx_buffer, nsamples, &meta, 2000);
if (status == BLADERF_ERR_TIME_PAST) {
if (blade_error_handler) {
error.type = SRSLTE_RF_ERROR_LATE;
blade_error_handler(error);
} else {
fprintf(stderr, "TX failed: %s\n", bladerf_strerror(status));
}
} else if (status) {
fprintf(stderr, "TX failed: %s\n", bladerf_strerror(status));
return status;
} else if (meta.status == BLADERF_META_STATUS_UNDERRUN) {
if (blade_error_handler) {
error.type = SRSLTE_RF_ERROR_UNDERFLOW;
blade_error_handler(error);
} else {
fprintf(stderr, "TX warning: underflow detected.\n");
}
}
return nsamples;
}
/* We've found that running samples through the LMS6 tends to be required
* for the TX LPF calibration to converge */
static inline int tx_lpf_dummy_tx(struct bladerf *dev)
{
int status;
int retval = 0;
struct bladerf_metadata meta;
int16_t zero_sample[] = { 0, 0 };
bladerf_loopback loopback_backup;
struct bladerf_rational_rate sample_rate_backup;
memset(&meta, 0, sizeof(meta));
status = bladerf_get_loopback(dev, &loopback_backup);
if (status != 0) {
return status;
}
status = bladerf_get_rational_sample_rate(dev, BLADERF_MODULE_TX,
&sample_rate_backup);
if (status != 0) {
return status;
}
status = bladerf_set_loopback(dev, BLADERF_LB_BB_TXVGA1_RXVGA2);
if (status != 0) {
goto out;
}
status = bladerf_set_sample_rate(dev, BLADERF_MODULE_TX, 3000000, NULL);
if (status != 0) {
goto out;
}
status = bladerf_sync_config(dev, BLADERF_MODULE_TX,
BLADERF_FORMAT_SC16_Q11_META,
64, 16384, 16, 1000);
if (status != 0) {
goto out;
}
status = bladerf_enable_module(dev, BLADERF_MODULE_TX, true);
if (status != 0) {
goto out;
}
meta.flags = BLADERF_META_FLAG_TX_BURST_START |
BLADERF_META_FLAG_TX_BURST_END |
BLADERF_META_FLAG_TX_NOW;
status = bladerf_sync_tx(dev, zero_sample, 1, &meta, 2000);
if (status != 0) {
goto out;
}
out:
status = bladerf_enable_module(dev, BLADERF_MODULE_TX, false);
if (status != 0 && retval == 0) {
retval = status;
}
status = bladerf_set_rational_sample_rate(dev, BLADERF_MODULE_TX,
&sample_rate_backup, NULL);
if (status != 0 && retval == 0) {
retval = status;
}
status = bladerf_set_loopback(dev, loopback_backup);
if (status != 0 && retval == 0) {
retval = status;
}
return retval;
}
static int tx_task_exec_running(struct rxtx_data *tx, struct cli_state *s)
{
int status = 0;
unsigned int samples_per_buffer;
int16_t *tx_buffer;
struct tx_params *tx_params = tx->params;
unsigned int repeats_remaining;
unsigned int delay_us;
unsigned int delay_samples;
unsigned int delay_samples_remaining;
bool repeat_infinite;
unsigned int timeout_ms;
unsigned int sample_rate;
enum state { INIT, READ_FILE, DELAY, PAD_TRAILING, DONE };
enum state state = INIT;
/* Fetch the parameters required for the TX operation */
MUTEX_LOCK(&tx->param_lock);
repeats_remaining = tx_params->repeat;
delay_us = tx_params->repeat_delay;
MUTEX_UNLOCK(&tx->param_lock);
repeat_infinite = (repeats_remaining == 0);
MUTEX_LOCK(&tx->data_mgmt.lock);
samples_per_buffer = (unsigned int)tx->data_mgmt.samples_per_buffer;
timeout_ms = tx->data_mgmt.timeout_ms;
MUTEX_UNLOCK(&tx->data_mgmt.lock);
status = bladerf_get_sample_rate(s->dev, tx->module, &sample_rate);
if (status != 0) {
set_last_error(&tx->last_error, ETYPE_BLADERF, status);
return CLI_RET_LIBBLADERF;
}
/* Compute delay time as a sample count */
delay_samples = (unsigned int)((uint64_t)sample_rate * delay_us / 1000000);
delay_samples_remaining = delay_samples;
/* Allocate a buffer to hold each block of samples to transmit */
tx_buffer = (int16_t*) malloc(samples_per_buffer * 2 * sizeof(int16_t));
if (tx_buffer == NULL) {
status = CLI_RET_MEM;
set_last_error(&tx->last_error, ETYPE_ERRNO,
errno == 0 ? ENOMEM : errno);
}
/* Keep writing samples while there is more data to send and no failures
* have occurred */
while (state != DONE && status == 0) {
unsigned char requests;
unsigned int buffer_samples_remaining = samples_per_buffer;
int16_t *tx_buffer_current = tx_buffer;
/* Stop stream on STOP or SHUTDOWN, but only clear STOP. This will keep
* the SHUTDOWN request around so we can read it when determining
* our state transition */
requests = rxtx_get_requests(tx, RXTX_TASK_REQ_STOP);
if (requests & (RXTX_TASK_REQ_STOP | RXTX_TASK_REQ_SHUTDOWN)) {
break;
}
/* Keep adding to the buffer until it is full or a failure occurs */
while (buffer_samples_remaining > 0 && status == 0 && state != DONE) {
size_t samples_populated = 0;
switch (state) {
case INIT:
case READ_FILE:
MUTEX_LOCK(&tx->file_mgmt.file_lock);
/* Read from the input file */
samples_populated = fread(tx_buffer_current,
2 * sizeof(int16_t),
buffer_samples_remaining,
tx->file_mgmt.file);
assert(samples_populated <= UINT_MAX);
/* If the end of the file was reached, determine whether
* to delay, re-read from the file, or pad the rest of the
* buffer and finish */
if (feof(tx->file_mgmt.file)) {
repeats_remaining--;
if ((repeats_remaining > 0) || repeat_infinite) {
if (delay_samples != 0) {
delay_samples_remaining = delay_samples;
state = DELAY;
}
}
else {
state = PAD_TRAILING;
}
/* Clear the EOF condition and rewind the file */
clearerr(tx->file_mgmt.file);
rewind(tx->file_mgmt.file);
}
/* Check for errors */
else if (ferror(tx->file_mgmt.file)) {
status = errno;
set_last_error(&tx->last_error, ETYPE_ERRNO, status);
}
MUTEX_UNLOCK(&tx->file_mgmt.file_lock);
break;
case DELAY:
/* Insert as many zeros as are necessary to realize the
* specified repeat delay */
samples_populated = uint_min(buffer_samples_remaining,
delay_samples_remaining);
memset(tx_buffer_current, 0,
samples_populated * 2 * sizeof(uint16_t));
delay_samples_remaining -= (unsigned int)samples_populated;
if (delay_samples_remaining == 0) {
state = READ_FILE;
}
break;
case PAD_TRAILING:
/* Populate the remainder of the buffer with zeros */
memset(tx_buffer_current, 0,
buffer_samples_remaining * 2 * sizeof(uint16_t));
state = DONE;
break;
case DONE:
default:
break;
}
/* Advance the buffer pointer.
* Remember, two int16_t's make up 1 sample in the SC16Q11 format */
buffer_samples_remaining -= (unsigned int)samples_populated;
tx_buffer_current += (2 * samples_populated);
}
/* If there were no errors, transmit the data buffer */
if (status == 0) {
bladerf_sync_tx(s->dev, tx_buffer, samples_per_buffer, NULL,
timeout_ms);
}
}
free(tx_buffer);
return status;
}
/** [example_snippet] */
int sync_rx_example(struct bladerf *dev)
{
int status, ret;
bool done = false;
/* "User" samples buffers and their associated sizes, in units of samples.
* Recall that one sample = two int16_t values. */
int16_t *rx_samples = NULL;
int16_t *tx_samples = NULL;
const unsigned int samples_len = 10000; /* May be any (reasonable) size */
/* These items configure the underlying asynch stream used by the sync
* interface. The "buffer" here refers to those used internally by worker
* threads, not the `samples` buffer above. */
const unsigned int num_buffers = 16;
const unsigned int buffer_size = 8192; /* Must be a multiple of 1024 */
const unsigned int num_transfers = 8;
const unsigned int timeout_ms = 3500;
/* Allocate a buffer to store received samples in */
rx_samples = malloc(samples_len * 2 * sizeof(int16_t));
if (rx_samples == NULL) {
perror("malloc");
return BLADERF_ERR_MEM;
}
/* Allocate a buffer to prepare transmit data in */
tx_samples = malloc(samples_len * 2 * sizeof(int16_t));
if (tx_samples == NULL) {
perror("malloc");
free(rx_samples);
return BLADERF_ERR_MEM;
}
/* Configure both the device's RX and TX modules for use with the synchronous
* interface. SC16 Q11 samples *without* metadata are used. */
status = bladerf_sync_config(dev,
BLADERF_MODULE_RX,
BLADERF_FORMAT_SC16_Q11,
num_buffers,
buffer_size,
num_transfers,
timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to configure RX sync interface: %s\n",
bladerf_strerror(status));
goto out;
}
status = bladerf_sync_config(dev,
BLADERF_MODULE_TX,
BLADERF_FORMAT_SC16_Q11,
num_buffers,
buffer_size,
num_transfers,
timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to configure TX sync interface: %s\n",
bladerf_strerror(status));
goto out;
}
/* We must always enable the modules *after* calling bladerf_sync_config(),
* and *before* attempting to RX or TX samples. */
status = bladerf_enable_module(dev, BLADERF_MODULE_RX, true);
if (status != 0) {
fprintf(stderr, "Failed to enable RX module: %s\n",
bladerf_strerror(status));
goto out;
}
status = bladerf_enable_module(dev, BLADERF_MODULE_TX, true);
if (status != 0) {
fprintf(stderr, "Failed to enable RX module: %s\n",
bladerf_strerror(status));
goto out;
}
/* Receive samples and do work on them and then transmit a response.
*
* Note we transmit more than `buffer_size` samples to ensure that our
* samples are written to the FPGA. (The samples are sent when the
* synchronous interface's internal buffer of `buffer_size` samples is
* filled.) This is generally not nececssary if you are continuously
* streaming TX data. Otherwise, you may need to zero-pad your TX data to
* achieve this.
*/
while (status == 0 && !done) {
status = bladerf_sync_rx(dev, rx_samples, samples_len, NULL, 5000);
if (status == 0) {
done = do_work(rx_samples, samples_len,
tx_samples, samples_len);
if (!done) {
status = bladerf_sync_tx(dev, tx_samples, samples_len,
NULL, 5000);
if (status != 0) {
fprintf(stderr, "Failed to TX samples: %s\n",
bladerf_strerror(status));
}
}
} else {
fprintf(stderr, "Failed to RX samples: %s\n",
bladerf_strerror(status));
}
}
if (status == 0) {
/* Wait a few seconds for any remaining TX samples to finish */
usleep(2000000);
}
out:
ret = status;
/* Disable RX module, shutting down our underlying RX stream */
status = bladerf_enable_module(dev, BLADERF_MODULE_RX, false);
if (status != 0) {
fprintf(stderr, "Failed to disable RX module: %s\n",
bladerf_strerror(status));
}
/* Disable TX module, shutting down our underlying TX stream */
status = bladerf_enable_module(dev, BLADERF_MODULE_TX, false);
if (status != 0) {
fprintf(stderr, "Failed to disable TX module: %s\n",
bladerf_strerror(status));
}
/* Free up our resources */
free(rx_samples);
free(tx_samples);
return ret;
}
static int run(struct bladerf *dev, struct app_params *p,
const struct test_case *t)
{
int status, status_out, status_wait;
unsigned int samples_left;
size_t i;
struct bladerf_metadata meta;
int16_t *samples, *buf;
samples = calloc(2 * sizeof(int16_t), t->burst_len + 2);
if (samples == NULL) {
perror("malloc");
return BLADERF_ERR_MEM;
}
/* Leave the last two samples zero */
for (i = 0; i < (2 * t->burst_len); i += 2) {
samples[i] = samples[i + 1] = MAGNITUDE;
}
memset(&meta, 0, sizeof(meta));
status = perform_sync_init(dev, BLADERF_MODULE_TX, t->buf_len, p);
if (status != 0) {
goto out;
}
status = bladerf_get_timestamp(dev, BLADERF_MODULE_TX, &meta.timestamp);
if (status != 0) {
fprintf(stderr, "Failed to get timestamp: %s\n",
bladerf_strerror(status));
goto out;
} else {
printf("Initial timestamp: 0x%016"PRIx64"\n", meta.timestamp);
}
meta.timestamp += 200000;
for (i = 0; i < t->iterations && status == 0; i++) {
meta.flags = BLADERF_META_FLAG_TX_BURST_START;
samples_left = t->burst_len + 2;
buf = samples;
printf("Sending burst @ %llu\n", (unsigned long long) meta.timestamp);
while (samples_left && status == 0) {
unsigned int to_send = uint_min(p->buf_size, samples_left);
if (to_send == samples_left) {
meta.flags |= BLADERF_META_FLAG_TX_BURST_END;
} else {
meta.flags &= ~BLADERF_META_FLAG_TX_BURST_END;
}
status = bladerf_sync_tx(dev, buf, to_send, &meta, 10000); //p->timeout_ms);
if (status != 0) {
fprintf(stderr, "TX failed @ iteration (%u) %s\n",
(unsigned int )i, bladerf_strerror(status));
}
meta.flags &= ~BLADERF_META_FLAG_TX_BURST_START;
samples_left -= to_send;
buf += 2 * to_send;
}
meta.timestamp += (t->burst_len + t->gap_len - 2);
}
printf("Waiting for samples to finish...\n");
fflush(stdout);
/* Wait for samples to be transmitted before shutting down the TX module */
status_wait = wait_for_timestamp(dev, BLADERF_MODULE_TX,
meta.timestamp - t->gap_len + 2,
3000);
if (status_wait != 0) {
status = first_error(status, status_wait);
fprintf(stderr, "Failed to wait for TX to finish: %s\n",
bladerf_strerror(status_wait));
}
out:
status_out = bladerf_enable_module(dev, BLADERF_MODULE_TX, false);
if (status_out != 0) {
fprintf(stderr, "Failed to disable TX module: %s\n",
bladerf_strerror(status));
} else {
printf("Done waiting.\n");
fflush(stdout);
}
status = first_error(status, status_out);
free(samples);
return status;
}
