C++ (Cpp) ble_gap_connect_req_dec Beispiele

Beispiel #1

Datei: conn_mw_ble_gap.c Projekt: kiibohd/controller

uint32_t conn_mw_ble_gap_connect(uint8_t const * const p_rx_buf,
                                 uint32_t              rx_buf_len,
                                 uint8_t * const       p_tx_buf,
                                 uint32_t * const      p_tx_buf_len)
{
    SER_ASSERT_NOT_NULL(p_rx_buf);
    SER_ASSERT_NOT_NULL(p_tx_buf);
    SER_ASSERT_NOT_NULL(p_tx_buf_len);

    ble_gap_addr_t   addr;
    ble_gap_addr_t * p_addr = &addr;

    ble_gap_scan_params_t scan_params;
    ble_gap_scan_params_t * p_scan_params = &scan_params;

    ble_gap_conn_params_t conn_params;
    ble_gap_conn_params_t * p_conn_params = &conn_params;

    uint32_t err_code = NRF_SUCCESS;
    uint32_t sd_err_code;

#if NRF_SD_BLE_API_VERSION >= 4
    uint8_t conn_cfg_tag;
    err_code = ble_gap_connect_req_dec(p_rx_buf, rx_buf_len, &p_addr,
                                       &p_scan_params, &p_conn_params, &conn_cfg_tag);
    SER_ASSERT(err_code == NRF_SUCCESS, err_code);

    sd_err_code = sd_ble_gap_connect(p_addr, p_scan_params, p_conn_params, conn_cfg_tag);
#else
    err_code = ble_gap_connect_req_dec(p_rx_buf, rx_buf_len, &p_addr,
                                       &p_scan_params, &p_conn_params);
    SER_ASSERT(err_code == NRF_SUCCESS, err_code);

    sd_err_code = sd_ble_gap_connect(p_addr, p_scan_params, p_conn_params);
#endif

    err_code = ble_gap_connect_rsp_enc(sd_err_code, p_tx_buf, p_tx_buf_len);
    SER_ASSERT(err_code == NRF_SUCCESS, err_code);

    return err_code;
}

Beispiel #2

Datei: conn_mw_ble_gap.c Projekt: DanielOld/wlock

uint32_t conn_mw_ble_gap_connect(uint8_t const * const p_rx_buf,
                                 uint32_t              rx_buf_len,
                                 uint8_t * const       p_tx_buf,
                                 uint32_t * const      p_tx_buf_len)
{
    SER_ASSERT_NOT_NULL(p_rx_buf);
    SER_ASSERT_NOT_NULL(p_tx_buf);
    SER_ASSERT_NOT_NULL(p_tx_buf_len);
    
    ble_gap_addr_t   addr;
    ble_gap_addr_t * p_addr = &addr;
    
    ble_gap_addr_t * pp_addr_tab[BLE_GAP_WHITELIST_ADDR_MAX_COUNT];
    ble_gap_irk_t * pp_irk_tab[BLE_GAP_WHITELIST_IRK_MAX_COUNT];
    
    ble_gap_addr_t addr_tab[BLE_GAP_WHITELIST_ADDR_MAX_COUNT];
    ble_gap_irk_t  irk_tab[BLE_GAP_WHITELIST_IRK_MAX_COUNT];
    
    for (uint8_t i = 0; i < BLE_GAP_WHITELIST_ADDR_MAX_COUNT; ++i)
    {
        pp_addr_tab[i] = &addr_tab[i];
    }
    for (uint8_t i = 0; i < BLE_GAP_WHITELIST_IRK_MAX_COUNT; ++i)
    {
        pp_irk_tab[i] = &irk_tab[i];
    }

    ble_gap_whitelist_t whitelist;
    whitelist.addr_count = BLE_GAP_WHITELIST_ADDR_MAX_COUNT;
    whitelist.pp_addrs   = pp_addr_tab;
    whitelist.irk_count  = BLE_GAP_WHITELIST_IRK_MAX_COUNT;
    whitelist.pp_irks    = pp_irk_tab;

    ble_gap_scan_params_t scan_params;
    scan_params.p_whitelist = &whitelist;
    ble_gap_scan_params_t * p_scan_params = &scan_params;

    ble_gap_conn_params_t conn_params;
    ble_gap_conn_params_t * p_conn_params = &conn_params;

    uint32_t err_code = NRF_SUCCESS;
    uint32_t sd_err_code;

    err_code = ble_gap_connect_req_dec(p_rx_buf, rx_buf_len, &p_addr, &p_scan_params, &p_conn_params);
    SER_ASSERT(err_code == NRF_SUCCESS, err_code);

    sd_err_code = sd_ble_gap_connect(p_addr, p_scan_params, p_conn_params);

    err_code = ble_gap_connect_rsp_enc(sd_err_code, p_tx_buf, p_tx_buf_len);
    SER_ASSERT(err_code == NRF_SUCCESS, err_code);

    return err_code;
}