int main( int argc, char** argv )
{
obj_t a, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, k;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, k_input;
num_t dt;
int r, n_repeats;
uplo_t uploc;
trans_t transa;
f77_char f77_uploc;
f77_char f77_transa;
double dtime;
double dtime_save;
double gflops;
bli_init();
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
n_repeats = 3;
#ifndef PRINT
p_begin = 200;
p_end = 2000;
p_inc = 200;
m_input = -1;
k_input = -1;
#else
p_begin = 16;
p_end = 16;
p_inc = 1;
m_input = 3;
k_input = 1;
#endif
#if 1
//dt = BLIS_FLOAT;
dt = BLIS_DOUBLE;
#else
//dt = BLIS_SCOMPLEX;
dt = BLIS_DCOMPLEX;
#endif
uploc = BLIS_LOWER;
//uploc = BLIS_UPPER;
transa = BLIS_NO_TRANSPOSE;
bli_param_map_blis_to_netlib_uplo( uploc, &f77_uploc );
bli_param_map_blis_to_netlib_trans( transa, &f77_transa );
for ( p = p_begin; p <= p_end; p += p_inc )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( k_input < 0 ) k = p * ( dim_t )abs(k_input);
else k = ( dim_t ) k_input;
bli_obj_create( dt, 1, 1, 0, 0, &alpha );
bli_obj_create( dt, 1, 1, 0, 0, &beta );
if ( bli_does_trans( transa ) )
bli_obj_create( dt, k, m, 0, 0, &a );
else
bli_obj_create( dt, m, k, 0, 0, &a );
bli_obj_create( dt, m, m, 0, 0, &c );
bli_obj_create( dt, m, m, 0, 0, &c_save );
bli_randm( &a );
bli_randm( &c );
bli_obj_set_struc( BLIS_HERMITIAN, c );
bli_obj_set_uplo( uploc, c );
bli_obj_set_conjtrans( transa, a );
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_setsc( -(1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%4.1f", "" );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
bli_herk( &alpha,
&a,
&beta,
&c );
#else
if ( bli_is_float( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
float* alphap = bli_obj_buffer( alpha );
float* ap = bli_obj_buffer( a );
float* betap = bli_obj_buffer( beta );
float* cp = bli_obj_buffer( c );
ssyrk_( &f77_uploc,
&f77_transa,
&mm,
&kk,
alphap,
ap, &lda,
betap,
cp, &ldc );
}
else if ( bli_is_double( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dsyrk_( &f77_uploc,
&f77_transa,
&mm,
&kk,
alphap,
ap, &lda,
betap,
cp, &ldc );
}
else if ( bli_is_scomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
float* alphap = bli_obj_buffer( alpha );
scomplex* ap = bli_obj_buffer( a );
float* betap = bli_obj_buffer( beta );
scomplex* cp = bli_obj_buffer( c );
cherk_( &f77_uploc,
&f77_transa,
&mm,
&kk,
alphap,
ap, &lda,
betap,
cp, &ldc );
}
else if ( bli_is_dcomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
double* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zherk_( &f77_uploc,
&f77_transa,
&mm,
&kk,
alphap,
ap, &lda,
betap,
cp, &ldc );
}
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
gflops = ( 1.0 * m * k * m ) / ( dtime_save * 1.0e9 );
if ( bli_is_complex( dt ) ) gflops *= 4.0;
#ifdef BLIS
printf( "data_herk_blis" );
#else
printf( "data_herk_%s", BLAS );
#endif
printf( "( %2lu, 1:4 ) = [ %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )k, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, n;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input;
num_t dt_a, dt_b, dt_c;
num_t dt_alpha, dt_beta;
int r, n_repeats;
side_t side;
uplo_t uplo;
double dtime;
double dtime_save;
double gflops;
bli_init();
n_repeats = 3;
#ifndef PRINT
p_begin = 40;
p_end = 2000;
p_inc = 40;
m_input = -1;
n_input = -1;
#else
p_begin = 16;
p_end = 16;
p_inc = 1;
m_input = 8;
n_input = 4;
#endif
dt_a = BLIS_DOUBLE;
dt_b = BLIS_DOUBLE;
dt_c = BLIS_DOUBLE;
dt_alpha = BLIS_DOUBLE;
dt_beta = BLIS_DOUBLE;
side = BLIS_LEFT;
//side = BLIS_RIGHT;
uplo = BLIS_LOWER;
for ( p = p_begin; p <= p_end; p += p_inc )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p * ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
bli_obj_create( dt_alpha, 1, 1, 0, 0, &alpha );
bli_obj_create( dt_beta, 1, 1, 0, 0, &beta );
if ( bli_is_left( side ) )
bli_obj_create( dt_a, m, m, 0, 0, &a );
else
bli_obj_create( dt_a, n, n, 0, 0, &a );
bli_obj_create( dt_b, m, n, 0, 0, &b );
bli_obj_create( dt_c, m, n, 0, 0, &c );
bli_obj_create( dt_c, m, n, 0, 0, &c_save );
bli_obj_set_struc( BLIS_TRIANGULAR, a );
bli_obj_set_uplo( uplo, a );
bli_randm( &a );
bli_randm( &c );
bli_randm( &b );
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_setsc( -(1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%11.8f", "" );
bli_printm( "c", &c, "%14.11f", "" );
#endif
#ifdef BLIS
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
bli_trmm( side,
&alpha,
&a,
&c );
#else
f77_char side = 'L';
f77_char uplo = 'L';
f77_char transa = 'N';
f77_char diag = 'N';
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* cp = bli_obj_buffer( c );
dtrmm_( &side,
&uplo,
&transa,
&diag,
&mm,
&nn,
alphap,
ap, &lda,
cp, &ldc );
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%14.11f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
if ( bli_is_left( side ) )
gflops = ( 1.0 * m * m * n ) / ( dtime_save * 1.0e9 );
else
gflops = ( 1.0 * m * n * n ) / ( dtime_save * 1.0e9 );
#ifdef BLIS
printf( "data_trmm_blis" );
#else
printf( "data_trmm_%s", BLAS );
#endif
printf( "( %2lu, 1:4 ) = [ %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )n, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, n;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input;
num_t dt_a, dt_b, dt_c;
num_t dt_alpha, dt_beta;
int r, n_repeats;
side_t side;
uplo_t uplo;
double dtime;
double dtime_save;
double gflops;
bli_init();
n_repeats = 3;
if( argc < 7 )
{
printf("Usage:\n");
printf("test_foo.x m n k p_begin p_inc p_end:\n");
exit;
}
int world_size, world_rank, provided;
MPI_Init_thread( NULL, NULL, MPI_THREAD_FUNNELED, &provided );
MPI_Comm_size( MPI_COMM_WORLD, &world_size );
MPI_Comm_rank( MPI_COMM_WORLD, &world_rank );
m_input = strtol( argv[1], NULL, 10 );
n_input = strtol( argv[2], NULL, 10 );
p_begin = strtol( argv[4], NULL, 10 );
p_inc = strtol( argv[5], NULL, 10 );
p_end = strtol( argv[6], NULL, 10 );
#if 1
dt_a = BLIS_DOUBLE;
dt_b = BLIS_DOUBLE;
dt_c = BLIS_DOUBLE;
dt_alpha = BLIS_DOUBLE;
dt_beta = BLIS_DOUBLE;
#else
dt_a = dt_b = dt_c = dt_alpha = dt_beta = BLIS_FLOAT;
//dt_a = dt_b = dt_c = dt_alpha = dt_beta = BLIS_SCOMPLEX;
#endif
side = BLIS_LEFT;
//side = BLIS_RIGHT;
uplo = BLIS_LOWER;
//uplo = BLIS_UPPER;
for ( p = p_begin + world_rank * p_inc; p <= p_end; p += p_inc * world_size )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p * ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
bli_obj_create( dt_alpha, 1, 1, 0, 0, &alpha );
bli_obj_create( dt_beta, 1, 1, 0, 0, &beta );
if ( bli_is_left( side ) )
bli_obj_create( dt_a, m, m, 0, 0, &a );
else
bli_obj_create( dt_a, n, n, 0, 0, &a );
bli_obj_create( dt_b, m, n, 0, 0, &b );
bli_obj_create( dt_c, m, n, 0, 0, &c );
bli_obj_create( dt_c, m, n, 0, 0, &c_save );
bli_obj_set_struc( BLIS_TRIANGULAR, &a );
bli_obj_set_uplo( uplo, &a );
//bli_obj_set_diag( BLIS_UNIT_DIAG, &a );
bli_randm( &a );
bli_randm( &c );
bli_randm( &b );
/*
{
obj_t a2;
bli_obj_alias_to( &a, &a2 );
bli_obj_toggle_uplo( &a2 );
bli_obj_inc_diag_offset( 1, &a2 );
bli_setm( &BLIS_ZERO, &a2 );
bli_obj_inc_diag_offset( -2, &a2 );
bli_obj_toggle_uplo( &a2 );
bli_obj_set_diag( BLIS_NONUNIT_DIAG, &a2 );
bli_scalm( &BLIS_TWO, &a2 );
//bli_scalm( &BLIS_TWO, &a );
}
*/
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_setsc( (1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
/*
obj_t ar, ai;
bli_obj_alias_to( &a, &ar );
bli_obj_alias_to( &a, &ai );
bli_obj_set_dt( BLIS_DOUBLE, &ar ); ar.rs *= 2; ar.cs *= 2;
bli_obj_set_dt( BLIS_DOUBLE, &ai ); ai.rs *= 2; ai.cs *= 2; ai.buffer = ( double* )ai.buffer + 1;
bli_printm( "ar", &ar, "%4.1f", "" );
bli_printm( "ai", &ai, "%4.1f", "" );
*/
bli_invertd( &a );
bli_printm( "a", &a, "%4.1f", "" );
bli_invertd( &a );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
bli_trsm( side,
//bli_trsm4m( side,
//bli_trsm3m( side,
&alpha,
&a,
&c );
#else
if ( bli_is_real( dt_a ) )
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_char transa = 'N';
f77_char diag = 'N';
f77_int mm = bli_obj_length( &c );
f77_int nn = bli_obj_width( &c );
f77_int lda = bli_obj_col_stride( &a );
f77_int ldc = bli_obj_col_stride( &c );
float * alphap = bli_obj_buffer( &alpha );
float * ap = bli_obj_buffer( &a );
float * cp = bli_obj_buffer( &c );
strsm_( &side,
&uplo,
&transa,
&diag,
&mm,
&nn,
alphap,
ap, &lda,
cp, &ldc );
}
else // if ( bli_is_complex( dt_a ) )
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_char transa = 'N';
f77_char diag = 'N';
f77_int mm = bli_obj_length( &c );
f77_int nn = bli_obj_width( &c );
f77_int lda = bli_obj_col_stride( &a );
f77_int ldc = bli_obj_col_stride( &c );
scomplex* alphap = bli_obj_buffer( &alpha );
scomplex* ap = bli_obj_buffer( &a );
scomplex* cp = bli_obj_buffer( &c );
ctrsm_( &side,
//ztrsm_( &side,
&uplo,
&transa,
&diag,
&mm,
&nn,
alphap,
ap, &lda,
cp, &ldc );
}
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
if ( bli_is_left( side ) )
gflops = ( 1.0 * m * m * n ) / ( dtime_save * 1.0e9 );
else
gflops = ( 1.0 * m * n * n ) / ( dtime_save * 1.0e9 );
if ( bli_is_complex( dt_a ) ) gflops *= 4.0;
#ifdef BLIS
printf( "data_trsm_blis" );
#else
printf( "data_trsm_%s", BLAS );
#endif
printf( "( %2lu, 1:4 ) = [ %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )n, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
bli_init();
#if 0
obj_t a, b, c;
obj_t aa, bb, cc;
dim_t m, n, k;
num_t dt;
uplo_t uploa, uplob, uploc;
{
dt = BLIS_DOUBLE;
m = 6;
k = 6;
n = 6;
bli_obj_create( dt, m, k, 0, 0, &a );
bli_obj_create( dt, k, n, 0, 0, &b );
bli_obj_create( dt, m, n, 0, 0, &c );
uploa = BLIS_UPPER;
uploa = BLIS_LOWER;
bli_obj_set_struc( BLIS_TRIANGULAR, a );
bli_obj_set_uplo( uploa, a );
bli_obj_set_diag_offset( -2, a );
uplob = BLIS_UPPER;
uplob = BLIS_LOWER;
bli_obj_set_struc( BLIS_TRIANGULAR, b );
bli_obj_set_uplo( uplob, b );
bli_obj_set_diag_offset( -2, b );
uploc = BLIS_UPPER;
//uploc = BLIS_LOWER;
//uploc = BLIS_ZEROS;
//uploc = BLIS_DENSE;
bli_obj_set_struc( BLIS_HERMITIAN, c );
//bli_obj_set_struc( BLIS_TRIANGULAR, c );
bli_obj_set_uplo( uploc, c );
bli_obj_set_diag_offset( 1, c );
bli_obj_alias_to( a, aa ); (void)aa;
bli_obj_alias_to( b, bb ); (void)bb;
bli_obj_alias_to( c, cc ); (void)cc;
bli_randm( &a );
bli_randm( &b );
bli_randm( &c );
//bli_mkherm( &a );
//bli_mktrim( &a );
bli_prune_unref_mparts( &cc, BLIS_M,
&aa, BLIS_N );
bli_printm( "c orig", &c, "%4.1f", "" );
bli_printm( "c alias", &cc, "%4.1f", "" );
bli_printm( "a orig", &a, "%4.1f", "" );
bli_printm( "a alias", &aa, "%4.1f", "" );
//bli_obj_print( "a struct", &a );
}
#endif
dim_t p_begin, p_max, p_inc;
gint_t m_input, n_input;
char uploa_ch;
doff_t diagoffa;
dim_t bf;
dim_t n_way;
char part_dim_ch;
bool_t go_fwd;
char out_ch;
obj_t a;
thrinfo_t thrinfo;
dim_t m, n;
uplo_t uploa;
bool_t part_m_dim, part_n_dim;
bool_t go_bwd;
dim_t p;
num_t dt;
dim_t start, end;
dim_t width;
siz_t area;
gint_t t_begin, t_stop, t_inc;
dim_t t;
if ( argc == 13 )
{
sscanf( argv[1], "%lu", &p_begin );
sscanf( argv[2], "%lu", &p_max );
sscanf( argv[3], "%lu", &p_inc );
sscanf( argv[4], "%ld", &m_input );
sscanf( argv[5], "%ld", &n_input );
sscanf( argv[6], "%c", &uploa_ch );
sscanf( argv[7], "%ld", &diagoffa );
sscanf( argv[8], "%lu", &bf );
sscanf( argv[9], "%lu", &n_way );
sscanf( argv[10], "%c", &part_dim_ch );
sscanf( argv[11], "%lu", &go_fwd );
sscanf( argv[12], "%c", &out_ch );
}
else
{
printf( "\n" );
printf( " %s\n", argv[0] );
printf( "\n" );
printf( " Simulate the dimension ranges assigned to threads when\n" );
printf( " partitioning a matrix for parallelism in BLIS.\n" );
printf( "\n" );
printf( " Usage:\n" );
printf( "\n" );
printf( " %s p_beg p_max p_inc m n uplo doff bf n_way part_dim go_fwd out\n", argv[0] );
printf( "\n" );
printf( " p_beg: the first problem size p to test.\n" );
printf( " p_max: the maximum problem size p to test.\n" );
printf( " p_inc: the increase in problem size p between tests.\n" );
printf( " m: the m dimension:\n" );
printf( " n: the n dimension:\n" );
printf( " if m,n = -1: bind m,n to problem size p.\n" );
printf( " if m,n = 0: bind m,n to p_max.\n" );
printf( " if m,n > 0: hold m,n = c constant for all p.\n" );
printf( " uplo: the uplo field of the matrix being partitioned:\n" );
printf( " 'l': lower-stored (BLIS_LOWER)\n" );
printf( " 'u': upper-stored (BLIS_UPPER)\n" );
printf( " 'd': densely-stored (BLIS_DENSE)\n" );
printf( " doff: the diagonal offset of the matrix being partitioned.\n" );
printf( " bf: the simulated blocking factor. all thread ranges must\n" );
printf( " be a multiple of bf, except for the range that contains\n" );
printf( " the edge case (if one exists). the blocking factor\n" );
printf( " would typically correspond to a register blocksize.\n" );
printf( " n_way: the number of ways of parallelism for which we are\n" );
printf( " partitioning (i.e.: the number of threads, or thread\n" );
printf( " groups).\n" );
printf( " part_dim: the dimension to partition:\n" );
printf( " 'm': partition the m dimension.\n" );
printf( " 'n': partition the n dimension.\n" );
printf( " go_fwd: the direction to partition:\n" );
printf( " '1': forward, e.g. left-to-right (part_dim = 'm') or\n" );
printf( " top-to-bottom (part_dim = 'n')\n" );
printf( " '0': backward, e.g. right-to-left (part_dim = 'm') or\n" );
printf( " bottom-to-top (part_dim = 'n')\n" );
printf( " NOTE: reversing the direction does not change the\n" );
printf( " subpartitions' widths, but it does change which end of\n" );
printf( " the index range receives the edge case, if it exists.\n" );
printf( " out: the type of output per thread-column:\n" );
printf( " 'w': the width (and area) of the thread's subpartition\n" );
printf( " 'r': the actual ranges of the thread's subpartition\n" );
printf( " where the start and end points of each range are\n" );
printf( " inclusive and exclusive, respectively.\n" );
printf( "\n" );
exit(1);
}
if ( m_input == 0 ) m_input = p_max;
if ( n_input == 0 ) n_input = p_max;
if ( part_dim_ch == 'm' ) { part_m_dim = TRUE; part_n_dim = FALSE; }
else { part_m_dim = FALSE; part_n_dim = TRUE; }
go_bwd = !go_fwd;
if ( uploa_ch == 'l' ) uploa = BLIS_LOWER;
else if ( uploa_ch == 'u' ) uploa = BLIS_UPPER;
else uploa = BLIS_DENSE;
if ( part_n_dim )
{
if ( bli_is_upper( uploa ) ) { t_begin = n_way-1; t_stop = -1; t_inc = -1; }
else /* if lower or dense */ { t_begin = 0; t_stop = n_way; t_inc = 1; }
}
else // if ( part_m_dim )
{
if ( bli_is_lower( uploa ) ) { t_begin = n_way-1; t_stop = -1; t_inc = -1; }
else /* if upper or dense */ { t_begin = 0; t_stop = n_way; t_inc = 1; }
}
printf( "\n" );
printf( " part: %3s doff: %3ld bf: %3ld output: %s\n",
( part_n_dim ? ( go_fwd ? "l2r" : "r2l" )
: ( go_fwd ? "t2b" : "b2t" ) ),
diagoffa, bf,
( out_ch == 'w' ? "width(area)" : "ranges" ) );
printf( " uplo: %3c nt: %3ld\n", uploa_ch, n_way );
printf( "\n" );
printf( " " );
for ( t = t_begin; t != t_stop; t += t_inc )
{
if ( part_n_dim )
{
if ( t == t_begin ) printf( "left... " );
else if ( t == t_stop-t_inc ) printf( " ...right" );
else printf( " " );
}
else // if ( part_m_dim )
{
if ( t == t_begin ) printf( "top... " );
else if ( t == t_stop-t_inc ) printf( " ...bottom" );
else printf( " " );
}
}
printf( "\n" );
printf( "%4c x %4c ", 'm', 'n' );
for ( t = t_begin; t != t_stop; t += t_inc )
{
printf( "%9s %lu ", "thread", t );
}
printf( "\n" );
printf( "-------------" );
for ( t = t_begin; t != t_stop; t += t_inc )
{
printf( "-------------" );
}
printf( "\n" );
for ( p = p_begin; p <= p_max; p += p_inc )
{
if ( m_input < 0 ) m = ( dim_t )p;
else m = ( dim_t )m_input;
if ( n_input < 0 ) n = ( dim_t )p;
else n = ( dim_t )n_input;
dt = BLIS_DOUBLE;
bli_obj_create( dt, m, n, 0, 0, &a );
bli_obj_set_struc( BLIS_TRIANGULAR, a );
bli_obj_set_uplo( uploa, a );
bli_obj_set_diag_offset( diagoffa, a );
bli_randm( &a );
printf( "%4lu x %4lu ", m, n );
for ( t = t_begin; t != t_stop; t += t_inc )
{
thrinfo.n_way = n_way;
thrinfo.work_id = t;
if ( part_n_dim && go_fwd )
area = bli_get_range_weighted_l2r( &thrinfo, &a, bf, &start, &end );
else if ( part_n_dim && go_bwd )
area = bli_get_range_weighted_r2l( &thrinfo, &a, bf, &start, &end );
else if ( part_m_dim && go_fwd )
area = bli_get_range_weighted_t2b( &thrinfo, &a, bf, &start, &end );
else // ( part_m_dim && go_bwd )
area = bli_get_range_weighted_b2t( &thrinfo, &a, bf, &start, &end );
width = end - start;
if ( out_ch == 'w' ) printf( "%4lu(%6lu) ", width, area );
else printf( "[%4lu,%4lu) ", start, end );
}
printf( "\n" );
bli_obj_free( &a );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, n, k;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input, k_input;
num_t dt_a, dt_b, dt_c;
num_t dt_alpha, dt_beta;
int r, n_repeats;
double dtime;
double dtime_save;
double gflops;
int world_size, world_rank, provided;
MPI_Init_thread( NULL, NULL, MPI_THREAD_FUNNELED, &provided );
MPI_Comm_size( MPI_COMM_WORLD, &world_size );
MPI_Comm_rank( MPI_COMM_WORLD, &world_rank );
bli_init();
n_repeats = 3;
#ifndef PRINT
p_begin = 16;
p_end = 2048;
p_inc = 16;
m_input = 10240;
n_input = 10240;
k_input = -1;
#else
p_begin = 24;
p_end = 24;
p_inc = 1;
m_input = -1;
k_input = -1;
n_input = -1;
#endif
dt_a = BLIS_DOUBLE;
dt_b = BLIS_DOUBLE;
dt_c = BLIS_DOUBLE;
dt_alpha = BLIS_DOUBLE;
dt_beta = BLIS_DOUBLE;
for ( p = p_begin + world_rank * p_inc ; p <= p_end; p += p_inc * world_size )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p * ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
if ( k_input < 0 ) k = p * ( dim_t )abs(k_input);
else k = ( dim_t ) k_input;
bli_obj_create( dt_alpha, 1, 1, 0, 0, &alpha );
bli_obj_create( dt_beta, 1, 1, 0, 0, &beta );
bli_obj_create( dt_a, m, k, 0, 0, &a );
bli_obj_create( dt_b, k, n, 0, 0, &b );
bli_obj_create( dt_c, m, n, 0, 0, &c );
bli_obj_create( dt_c, m, n, 0, 0, &c_save );
bli_randm( &a );
bli_randm( &b );
bli_randm( &c );
bli_setsc( (1.0/1.0), 0.0, &alpha );
bli_setsc( (1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%4.1f", "" );
bli_printm( "b", &b, "%4.1f", "" );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
{
bli_gemm( &alpha,
&a,
&b,
&beta,
&c );
}
#else
char transa = 'N';
char transb = 'N';
int mm = bli_obj_length( c );
int kk = bli_obj_width_after_trans( a );
int nn = bli_obj_width( c );
int lda = bli_obj_col_stride( a );
int ldb = bli_obj_col_stride( b );
int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dgemm_( &transa,
&transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
gflops = ( 2.0 * m * k * n ) / ( dtime_save * 1.0e9 );
//if(world_rank == 0){
#ifdef BLIS
printf( "data_gemm_blis" );
#else
printf( "data_gemm_%s", BLAS );
#endif
printf( "( %2ld, 1:5 ) = [ %4lu %4lu %4lu %10.3e %6.3f %d ];\n",
(p - p_begin + 1)/p_inc + 1, m, k, n, dtime_save, gflops, world_rank );
//}
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
MPI_Finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, n;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input;
num_t dt;
int r, n_repeats;
side_t side;
uplo_t uploa;
f77_char f77_side;
f77_char f77_uploa;
double dtime;
double dtime_save;
double gflops;
bli_init();
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
n_repeats = 3;
#ifndef PRINT
p_begin = 200;
p_end = 2000;
p_inc = 200;
m_input = -1;
n_input = -1;
#else
p_begin = 16;
p_end = 16;
p_inc = 1;
m_input = 4;
n_input = 4;
#endif
#if 1
//dt = BLIS_FLOAT;
dt = BLIS_DOUBLE;
#else
//dt = BLIS_SCOMPLEX;
dt = BLIS_DCOMPLEX;
#endif
side = BLIS_LEFT;
//side = BLIS_RIGHT;
uploa = BLIS_LOWER;
//uploa = BLIS_UPPER;
bli_param_map_blis_to_netlib_side( side, &f77_side );
bli_param_map_blis_to_netlib_uplo( uploa, &f77_uploa );
for ( p = p_begin; p <= p_end; p += p_inc )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p * ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
bli_obj_create( dt, 1, 1, 0, 0, &alpha );
bli_obj_create( dt, 1, 1, 0, 0, &beta );
if ( bli_is_left( side ) )
bli_obj_create( dt, m, m, 0, 0, &a );
else
bli_obj_create( dt, n, n, 0, 0, &a );
bli_obj_create( dt, m, n, 0, 0, &b );
bli_obj_create( dt, m, n, 0, 0, &c );
bli_obj_create( dt, m, n, 0, 0, &c_save );
bli_randm( &a );
bli_randm( &b );
bli_randm( &c );
bli_obj_set_struc( BLIS_HERMITIAN, a );
bli_obj_set_uplo( uploa, a );
// Randomize A, make it densely Hermitian, and zero the unstored
// triangle to ensure the implementation reads only from the stored
// region.
bli_randm( &a );
bli_mkherm( &a );
bli_mktrim( &a );
/*
bli_obj_toggle_uplo( a );
bli_obj_inc_diag_off( 1, a );
bli_setm( &BLIS_ZERO, &a );
bli_obj_inc_diag_off( -1, a );
bli_obj_toggle_uplo( a );
bli_obj_set_diag( BLIS_NONUNIT_DIAG, a );
bli_scalm( &BLIS_TWO, &a );
bli_scalm( &BLIS_TWO, &a );
*/
bli_setsc( (2.0/1.0), 1.0, &alpha );
bli_setsc( -(1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%4.1f", "" );
bli_printm( "b", &b, "%4.1f", "" );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
bli_hemm( side,
&alpha,
&a,
&b,
&beta,
&c );
#else
if ( bli_is_float( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
float* alphap = bli_obj_buffer( alpha );
float* ap = bli_obj_buffer( a );
float* bp = bli_obj_buffer( b );
float* betap = bli_obj_buffer( beta );
float* cp = bli_obj_buffer( c );
ssymm_( &f77_side,
&f77_uploa,
&mm,
&nn,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_double( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dsymm_( &f77_side,
&f77_uploa,
&mm,
&nn,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_scomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
scomplex* alphap = bli_obj_buffer( alpha );
scomplex* ap = bli_obj_buffer( a );
scomplex* bp = bli_obj_buffer( b );
scomplex* betap = bli_obj_buffer( beta );
scomplex* cp = bli_obj_buffer( c );
chemm_( &f77_side,
&f77_uploa,
&mm,
&nn,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_dcomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* bp = bli_obj_buffer( b );
dcomplex* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zhemm_( &f77_side,
&f77_uploa,
&mm,
&nn,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%9.5f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
if ( bli_is_left( side ) )
gflops = ( 2.0 * m * m * n ) / ( dtime_save * 1.0e9 );
else
gflops = ( 2.0 * m * n * n ) / ( dtime_save * 1.0e9 );
if ( bli_is_complex( dt ) ) gflops *= 4.0;
#ifdef BLIS
printf( "data_hemm_blis" );
#else
printf( "data_hemm_%s", BLAS );
#endif
printf( "( %2lu, 1:4 ) = [ %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )n, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, x, y;
obj_t a_save;
obj_t alpha;
dim_t m, n;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input;
num_t dt_a, dt_x, dt_y;
num_t dt_alpha;
int r, n_repeats;
double dtime;
double dtime_save;
double gflops;
bli_init();
n_repeats = 3;
#ifndef PRINT
p_begin = 40;
p_end = 2000;
p_inc = 40;
m_input = -1;
n_input = -1;
#else
p_begin = 16;
p_end = 16;
p_inc = 1;
m_input = 15;
n_input = 15;
#endif
dt_alpha = dt_x = dt_y = dt_a = BLIS_DOUBLE;
for ( p = p_begin; p <= p_end; p += p_inc )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p * ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
bli_obj_create( dt_alpha, 1, 1, 0, 0, &alpha );
bli_obj_create( dt_x, m, 1, 0, 0, &x );
bli_obj_create( dt_y, n, 1, 0, 0, &y );
bli_obj_create( dt_a, m, n, 0, 0, &a );
bli_obj_create( dt_a, m, n, 0, 0, &a_save );
bli_randm( &x );
bli_randm( &y );
bli_randm( &a );
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_copym( &a, &a_save );
dtime_save = DBL_MAX;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &a_save, &a );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "x", &x, "%4.1f", "" );
bli_printm( "y", &y, "%4.1f", "" );
bli_printm( "a", &a, "%4.1f", "" );
#endif
#ifdef BLIS
bli_ger( &alpha,
&x,
&y,
&a );
#else
f77_int mm = bli_obj_length( a );
f77_int nn = bli_obj_width( a );
f77_int incx = bli_obj_vector_inc( x );
f77_int incy = bli_obj_vector_inc( y );
f77_int lda = bli_obj_col_stride( a );
double* alphap = bli_obj_buffer( alpha );
double* xp = bli_obj_buffer( x );
double* yp = bli_obj_buffer( y );
double* ap = bli_obj_buffer( a );
dger_( &mm,
&nn,
alphap,
xp, &incx,
yp, &incy,
ap, &lda );
#endif
#ifdef PRINT
bli_printm( "a after", &a, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
gflops = ( 2.0 * m * n ) / ( dtime_save * 1.0e9 );
#ifdef BLIS
printf( "data_ger_blis" );
#else
printf( "data_ger_%s", BLAS );
#endif
printf( "( %2lu, 1:4 ) = [ %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )n, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &x );
bli_obj_free( &y );
bli_obj_free( &a );
bli_obj_free( &a_save );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, n, k;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input, k_input;
num_t dt, dt_real;
char dt_ch;
int r, n_repeats;
trans_t transa;
trans_t transb;
f77_char f77_transa;
f77_char f77_transb;
double dtime;
double dtime_save;
double gflops;
extern blksz_t* gemm_kc;
bli_init();
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
n_repeats = 3;
dt = DT;
dt_real = bli_datatype_proj_to_real( DT );
p_begin = P_BEGIN;
p_end = P_END;
p_inc = P_INC;
m_input = -1;
n_input = -1;
k_input = -1;
// Extract the kc blocksize for the requested datatype and its
// real analogue.
dim_t kc = bli_blksz_get_def( dt, gemm_kc );
dim_t kc_real = bli_blksz_get_def( dt_real, gemm_kc );
// Assign the k dimension depending on which implementation is
// being tested. Note that the BLIS_NAT case handles the real
// domain cases as well as native complex.
if ( IND == BLIS_NAT ) k_input = kc;
else if ( IND == BLIS_3M1 ) k_input = kc_real / 3;
else if ( IND == BLIS_4M1A ) k_input = kc_real / 2;
else k_input = kc_real;
// Adjust the relative dimensions, if requested.
#if (defined ADJ_MK)
m_input = -2; k_input = -2; n_input = -1;
#elif (defined ADJ_KN)
k_input = -2; n_input = -2; m_input = -1;
#elif (defined ADJ_MN)
m_input = -2; n_input = -2; k_input = -1;
#endif
// Choose the char corresponding to the requested datatype.
if ( bli_is_float( dt ) ) dt_ch = 's';
else if ( bli_is_double( dt ) ) dt_ch = 'd';
else if ( bli_is_scomplex( dt ) ) dt_ch = 'c';
else dt_ch = 'z';
transa = BLIS_NO_TRANSPOSE;
transb = BLIS_NO_TRANSPOSE;
bli_param_map_blis_to_netlib_trans( transa, &f77_transa );
bli_param_map_blis_to_netlib_trans( transb, &f77_transb );
// Begin with initializing the last entry to zero so that
// matlab allocates space for the entire array once up-front.
for ( p = p_begin; p + p_inc <= p_end; p += p_inc ) ;
#ifdef BLIS
printf( "data_%s_%cgemm_%s_blis", THR_STR, dt_ch, STR );
#else
printf( "data_%s_%cgemm_%s", THR_STR, dt_ch, STR );
#endif
printf( "( %2lu, 1:5 ) = [ %4lu %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )0,
( unsigned long )0,
( unsigned long )0, 0.0, 0.0 );
for ( p = p_begin; p <= p_end; p += p_inc )
{
if ( m_input < 0 ) m = p / ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p / ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
if ( k_input < 0 ) k = p / ( dim_t )abs(k_input);
else k = ( dim_t ) k_input;
bli_obj_create( dt, 1, 1, 0, 0, &alpha );
bli_obj_create( dt, 1, 1, 0, 0, &beta );
bli_obj_create( dt, m, k, 0, 0, &a );
bli_obj_create( dt, k, n, 0, 0, &b );
bli_obj_create( dt, m, n, 0, 0, &c );
//bli_obj_create( dt, m, k, 2, 2*m, &a );
//bli_obj_create( dt, k, n, 2, 2*k, &b );
//bli_obj_create( dt, m, n, 2, 2*m, &c );
bli_obj_create( dt, m, n, 0, 0, &c_save );
bli_randm( &a );
bli_randm( &b );
bli_randm( &c );
bli_obj_set_conjtrans( transa, a );
bli_obj_set_conjtrans( transb, b );
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_setsc( -(1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
#ifdef BLIS
bli_ind_disable_all_dt( dt );
bli_ind_enable_dt( IND, dt );
#endif
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%4.1f", "" );
bli_printm( "b", &b, "%4.1f", "" );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
bli_gemm( &alpha,
&a,
&b,
&beta,
&c );
#else
if ( bli_is_float( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
float* alphap = bli_obj_buffer( alpha );
float* ap = bli_obj_buffer( a );
float* bp = bli_obj_buffer( b );
float* betap = bli_obj_buffer( beta );
float* cp = bli_obj_buffer( c );
sgemm_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_double( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dgemm_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_scomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
scomplex* alphap = bli_obj_buffer( alpha );
scomplex* ap = bli_obj_buffer( a );
scomplex* bp = bli_obj_buffer( b );
scomplex* betap = bli_obj_buffer( beta );
scomplex* cp = bli_obj_buffer( c );
cgemm_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_dcomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* bp = bli_obj_buffer( b );
dcomplex* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zgemm_( &f77_transa,
//zgemm3m_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
gflops = ( 2.0 * m * k * n ) / ( dtime_save * 1.0e9 );
if ( bli_is_complex( dt ) ) gflops *= 4.0;
#ifdef BLIS
printf( "data_%s_%cgemm_%s_blis", THR_STR, dt_ch, STR );
#else
printf( "data_%s_%cgemm_%s", THR_STR, dt_ch, STR );
#endif
printf( "( %2lu, 1:5 ) = [ %4lu %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )k,
( unsigned long )n, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}
void bli_init_auto( err_t* init_result )
{
*init_result = bli_init();
}
static struct options parse_options(int argc, char** argv) {
struct options options = {
.type = gemm_type_unknown,
.k = 0,
.m = 0,
.n = 0,
.iterations = 151
};
for (int argi = 1; argi < argc; argi += 1) {
if ((strcmp(argv[argi], "-g") == 0) || (strcmp(argv[argi], "--gemm") == 0)) {
if (argi + 1 == argc) {
fprintf(stderr, "Error: expected k value\n");
exit(EXIT_FAILURE);
}
if (strcmp(argv[argi + 1], "sgemm") == 0) {
options.type = gemm_type_sgemm;
} else if (strcmp(argv[argi + 1], "cgemm") == 0) {
options.type = gemm_type_cgemm;
} else {
fprintf(stderr, "Error: invalid value %s for the gemm type: expected \"sgemm\", \"cgemm\"\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
argi += 1;
} else if (strcmp(argv[argi], "-k") == 0) {
if (argi + 1 == argc) {
fprintf(stderr, "Error: expected K value\n");
exit(EXIT_FAILURE);
}
if (sscanf(argv[argi + 1], "%zu", &options.k) != 1) {
fprintf(stderr, "Error: can not parse %s as an unsigned integer\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
if (options.k == 0) {
fprintf(stderr, "Error: invalid value %s for the K parameter: positive value expected\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
argi += 1;
} else if (strcmp(argv[argi], "-m") == 0) {
if (argi + 1 == argc) {
fprintf(stderr, "Error: expected M value\n");
exit(EXIT_FAILURE);
}
if (sscanf(argv[argi + 1], "%zu", &options.m) != 1) {
fprintf(stderr, "Error: can not parse %s as an unsigned integer\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
if (options.m == 0) {
fprintf(stderr, "Error: invalid value %s for the M parameter: positive value expected\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
argi += 1;
} else if (strcmp(argv[argi], "-n") == 0) {
if (argi + 1 == argc) {
fprintf(stderr, "Error: expected N value\n");
exit(EXIT_FAILURE);
}
if (sscanf(argv[argi + 1], "%zu", &options.n) != 1) {
fprintf(stderr, "Error: can not parse %s as an unsigned integer\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
if (options.n == 0) {
fprintf(stderr, "Error: invalid value %s for the N parameter: positive value expected\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
argi += 1;
} else if ((strcmp(argv[argi], "--iterations") == 0) || (strcmp(argv[argi], "-i") == 0)) {
if (argi + 1 == argc) {
fprintf(stderr, "Error: expected iterations value\n");
exit(EXIT_FAILURE);
}
if (sscanf(argv[argi + 1], "%zu", &options.iterations) != 1) {
fprintf(stderr, "Error: can not parse %s as an unsigned integer\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
if (options.iterations == 0) {
fprintf(stderr, "Error: invalid value %s for the number of iterations: positive value expected\n", argv[argi + 1]);
exit(EXIT_FAILURE);
}
argi += 1;
} else if ((strcmp(argv[argi], "--help") == 0) || (strcmp(argv[argi], "-h") == 0)) {
print_options_help(argv[0]);
exit(EXIT_SUCCESS);
} else {
fprintf(stderr, "Error: unknown argument '%s'\n", argv[argi]);
print_options_help(argv[0]);
exit(EXIT_FAILURE);
}
}
if (options.type == gemm_type_unknown) {
fprintf(stderr, "Error: gemm kernel type is not specified\n");
print_options_help(argv[0]);
exit(EXIT_FAILURE);
}
if (options.m == 0) {
fprintf(stderr, "Error: M is not specified\n");
print_options_help(argv[0]);
exit(EXIT_FAILURE);
}
if (options.n == 0) {
fprintf(stderr, "Error: N is not specified\n");
print_options_help(argv[0]);
exit(EXIT_FAILURE);
}
if (options.k == 0) {
fprintf(stderr, "Error: K is not specified\n");
print_options_help(argv[0]);
exit(EXIT_FAILURE);
}
return options;
}
int main(int argc, char** argv) {
const struct options options = parse_options(argc, argv);
size_t components = 0;
switch (options.type) {
case gemm_type_sgemm:
components = 1;
break;
case gemm_type_cgemm:
components = 2;
break;
default:
__builtin_unreachable();
}
const size_t cache_size = 128 * 1024 * 1024;
void* memory = valloc(cache_size);
#ifdef USE_BLIS
err_t blis_status = bli_init();
if (blis_status != BLIS_SUCCESS) {
fprintf(stderr, "BLIS initialization failed: error code %d\n", blis_status);
exit(EXIT_FAILURE);
}
#endif
float* c = (float*) valloc(options.m * options.n * components * sizeof(float));
float* a = (float*) valloc(options.m * options.k * components * sizeof(float));
float* b = (float*) valloc(options.k * options.n * components * sizeof(float));
memset(c, 0, options.m * options.n * components * sizeof(float));
memset(a, 0, options.m * options.k * components * sizeof(float));
memset(b, 0, options.k * options.n * components * sizeof(float));
{
printf("Iterations: %zu\n", options.iterations);
const unsigned long long gemm_nanoseconds = benchmark_gemm(
memory, cache_size,
options.type,
options.m, options.n, options.k,
a, b, c,
options.iterations);
const double gemm_gflops = 2.0 * components * components * options.m * options.n * options.k / ((double) gemm_nanoseconds);
printf("Time: %5.3lf ms\n", gemm_nanoseconds * 1.0e-6);
printf("Performance: %5.3lf GFLOPs/s\n", gemm_gflops);
}
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t x, y;
obj_t alpha, beta;
dim_t m;
num_t dt_a, dt_b, dt_c;
num_t dt_alpha, dt_beta;
int ii;
#ifdef NBLIS
bli_init();
#endif
m = 4000;
dt_a = BLIS_DOUBLE;
dt_b = BLIS_DOUBLE;
dt_c = BLIS_DOUBLE;
dt_alpha = BLIS_DOUBLE;
dt_beta = BLIS_DOUBLE;
{
#ifdef NBLIS
bli_obj_create( dt_alpha, 1, 1, 0, 0, &alpha );
bli_obj_create( dt_beta, 1, 1, 0, 0, &beta );
bli_obj_create( dt_a, m, 1, 0, 0, &x );
bli_obj_create( dt_a, m, 1, 0, 0, &y );
bli_obj_create( dt_a, m, m, 0, 0, &a );
bli_obj_create( dt_b, m, m, 0, 0, &b );
bli_obj_create( dt_c, m, m, 0, 0, &c );
bli_randm( &a );
bli_randm( &b );
bli_randm( &c );
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_setsc( -(1.0/1.0), 0.0, &beta );
#endif
#ifdef NBLAS
x.buffer = malloc( m * 1 * sizeof( double ) );
y.buffer = malloc( m * 1 * sizeof( double ) );
alpha.buffer = malloc( 1 * sizeof( double ) );
beta.buffer = malloc( 1 * sizeof( double ) );
a.buffer = malloc( m * m * sizeof( double ) );
a.m = m;
a.n = m;
a.cs = m;
b.buffer = malloc( m * m * sizeof( double ) );
b.m = m;
b.n = m;
b.cs = m;
c.buffer = malloc( m * m * sizeof( double ) );
c.m = m;
c.n = m;
c.cs = m;
*((double*)alpha.buffer) = 2.0;
*((double*)beta.buffer) = -1.0;
#endif
#ifdef NBLIS
#if NBLIS >= 1
for ( ii = 0; ii < 2000000000; ++ii )
{
bli_gemm( &BLIS_ONE,
&a,
&b,
&BLIS_ONE,
&c );
}
#endif
#if NBLIS >= 2
{
bli_hemm( BLIS_LEFT,
&BLIS_ONE,
&a,
&b,
&BLIS_ONE,
&c );
}
#endif
#if NBLIS >= 3
{
bli_herk( &BLIS_ONE,
&a,
&BLIS_ONE,
&c );
}
#endif
#if NBLIS >= 4
{
bli_her2k( &BLIS_ONE,
&a,
&b,
&BLIS_ONE,
&c );
}
#endif
#if NBLIS >= 5
{
bli_trmm( BLIS_LEFT,
&BLIS_ONE,
&a,
&c );
}
#endif
#if NBLIS >= 6
{
bli_trsm( BLIS_LEFT,
&BLIS_ONE,
&a,
&c );
}
#endif
#endif
#ifdef NBLAS
#if NBLAS >= 1
for ( ii = 0; ii < 2000000000; ++ii )
{
f77_char transa = 'N';
f77_char transb = 'N';
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dgemm_( &transa,
&transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 2
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dsymm_( &side,
&uplo,
&mm,
&nn,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 3
{
f77_char uplo = 'L';
f77_char trans = 'N';
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dsyrk_( &uplo,
&trans,
&mm,
&kk,
alphap,
ap, &lda,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 4
{
f77_char uplo = 'L';
f77_char trans = 'N';
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dsyr2k_( &uplo,
&trans,
&mm,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 5
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_char trans = 'N';
f77_char diag = 'N';
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* cp = bli_obj_buffer( c );
dtrmm_( &side,
&uplo,
&trans,
&diag,
&mm,
&nn,
alphap,
ap, &lda,
cp, &ldc );
}
#endif
#if NBLAS >= 6
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_char trans = 'N';
f77_char diag = 'N';
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* cp = bli_obj_buffer( c );
dtrsm_( &side,
&uplo,
&trans,
&diag,
&mm,
&nn,
alphap,
ap, &lda,
cp, &ldc );
}
#endif
#if NBLAS >= 7
{
f77_char transa = 'N';
f77_char transb = 'N';
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* bp = bli_obj_buffer( b );
dcomplex* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zgemm_( &transa,
&transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 8
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* bp = bli_obj_buffer( b );
dcomplex* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zhemm_( &side,
&uplo,
&mm,
&nn,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 9
{
f77_char uplo = 'L';
f77_char trans = 'N';
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
double* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zherk_( &uplo,
&trans,
&mm,
&kk,
alphap,
ap, &lda,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 10
{
f77_char uplo = 'L';
f77_char trans = 'N';
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width( a );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zher2k_( &uplo,
&trans,
&mm,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#if NBLAS >= 11
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_char trans = 'N';
f77_char diag = 'N';
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* cp = bli_obj_buffer( c );
ztrmm_( &side,
&uplo,
&trans,
&diag,
&mm,
&nn,
alphap,
ap, &lda,
cp, &ldc );
}
#endif
#if NBLAS >= 12
{
f77_char side = 'L';
f77_char uplo = 'L';
f77_char trans = 'N';
f77_char diag = 'N';
f77_int mm = bli_obj_length( c );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* cp = bli_obj_buffer( c );
ztrsm_( &side,
&uplo,
&trans,
&diag,
&mm,
&nn,
alphap,
ap, &lda,
cp, &ldc );
}
#endif
#endif
#ifdef NBLIS
bli_obj_free( &x );
bli_obj_free( &y );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
#endif
#ifdef NBLAS
free( x.buffer );
free( y.buffer );
free( alpha.buffer );
free( beta.buffer );
free( a.buffer );
free( b.buffer );
free( c.buffer );
#endif
}
#ifdef NBLIS
bli_finalize();
#endif
return 0;
}
int main( int argc, char** argv )
{
obj_t a, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, k;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, k_input;
num_t dt_a, dt_c;
num_t dt_alpha, dt_beta;
int r, n_repeats;
uplo_t uplo;
double dtime;
double dtime_save;
double gflops;
bli_init();
n_repeats = 3;
if( argc < 7 )
{
printf("Usage:\n");
printf("test_foo.x m n k p_begin p_inc p_end:\n");
exit;
}
int world_size, world_rank, provided;
MPI_Init_thread( NULL, NULL, MPI_THREAD_FUNNELED, &provided );
MPI_Comm_size( MPI_COMM_WORLD, &world_size );
MPI_Comm_rank( MPI_COMM_WORLD, &world_rank );
m_input = strtol( argv[1], NULL, 10 );
k_input = strtol( argv[3], NULL, 10 );
p_begin = strtol( argv[4], NULL, 10 );
p_inc = strtol( argv[5], NULL, 10 );
p_end = strtol( argv[6], NULL, 10 );
dt_a = BLIS_DOUBLE;
dt_c = BLIS_DOUBLE;
dt_alpha = BLIS_DOUBLE;
dt_beta = BLIS_DOUBLE;
uplo = BLIS_LOWER;
for ( p = p_begin + world_rank * p_inc; p <= p_end; p += p_inc * world_size )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( k_input < 0 ) k = p * ( dim_t )abs(k_input);
else k = ( dim_t ) k_input;
bli_obj_create( dt_alpha, 1, 1, 0, 0, &alpha );
bli_obj_create( dt_beta, 1, 1, 0, 0, &beta );
bli_obj_create( dt_a, m, k, 0, 0, &a );
bli_obj_create( dt_c, m, m, 0, 0, &c );
bli_obj_create( dt_c, m, m, 0, 0, &c_save );
bli_randm( &a );
bli_randm( &c );
bli_obj_set_struc( BLIS_HERMITIAN, &c );
bli_obj_set_uplo( uplo, &c );
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_setsc( (1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%4.1f", "" );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
bli_herk( &alpha,
&a,
&beta,
&c );
#else
f77_char uploa = 'L';
f77_char transa = 'N';
f77_int mm = bli_obj_length( &c );
f77_int kk = bli_obj_width_after_trans( &a );
f77_int lda = bli_obj_col_stride( &a );
f77_int ldc = bli_obj_col_stride( &c );
double* alphap = bli_obj_buffer( &alpha );
double* ap = bli_obj_buffer( &a );
double* betap = bli_obj_buffer( &beta );
double* cp = bli_obj_buffer( &c );
dsyrk_( &uploa,
&transa,
&mm,
&kk,
alphap,
ap, &lda,
betap,
cp, &ldc );
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
gflops = ( 1.0 * m * k * m ) / ( dtime_save * 1.0e9 );
#ifdef BLIS
printf( "data_herk_blis" );
#else
printf( "data_herk_%s", BLAS );
#endif
printf( "( %2lu, 1:4 ) = [ %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )k, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, n, k;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input, k_input;
num_t dt_a, dt_b, dt_c;
num_t dt_alpha, dt_beta;
int r, n_repeats;
double dtime;
double dtime_save;
double gflops;
bli_init();
n_repeats = 3;
#ifndef PRINT
p_begin = 40;
p_end = 2000;
p_inc = 40;
m_input = -1;
n_input = -1;
k_input = -1;
#else
p_begin = 16;
p_end = 16;
p_inc = 1;
m_input = 8;
k_input = 16;
n_input = 16;
#endif
dt_a = BLIS_DOUBLE;
dt_b = BLIS_DOUBLE;
dt_c = BLIS_DOUBLE;
dt_alpha = BLIS_DOUBLE;
dt_beta = BLIS_DOUBLE;
for ( p = p_begin; p <= p_end; p += p_inc )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p * ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
if ( k_input < 0 ) k = p * ( dim_t )abs(k_input);
else k = ( dim_t ) k_input;
bli_obj_create( dt_alpha, 1, 1, 0, 0, &alpha );
bli_obj_create( dt_beta, 1, 1, 0, 0, &beta );
bli_obj_create( dt_a, m, k, 0, 0, &a );
bli_obj_create( dt_b, k, n, 0, 0, &b );
bli_obj_create( dt_c, m, n, 0, 0, &c );
bli_obj_create( dt_c, m, n, 0, 0, &c_save );
bli_randm( &a );
bli_randm( &b );
bli_randm( &c );
bli_setsc( (2.0/1.0), 0.0, &alpha );
bli_setsc( -(1.0/1.0), 0.0, &beta );
bli_copym( &c, &c_save );
dtime_save = 1.0e9;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%4.1f", "" );
bli_printm( "b", &b, "%4.1f", "" );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
bli_gemm( &alpha,
&a,
&b,
&beta,
&c );
#else
f77_char transa = 'N';
f77_char transb = 'N';
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dgemm_( &transa,
&transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
gflops = ( 2.0 * m * k * n ) / ( dtime_save * 1.0e9 );
#ifdef BLIS
printf( "data_gemm_blis" );
#else
printf( "data_gemm_%s", BLAS );
#endif
printf( "( %2lu, 1:5 ) = [ %4lu %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )k,
( unsigned long )n, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}
int main( int argc, char** argv )
{
obj_t a, b, c;
obj_t c_save;
obj_t alpha, beta;
dim_t m, n, k;
dim_t p;
dim_t p_begin, p_end, p_inc;
int m_input, n_input, k_input;
num_t dt;
int r, n_repeats;
trans_t transa;
trans_t transb;
f77_char f77_transa;
f77_char f77_transb;
double dtime;
double dtime_save;
double gflops;
bli_init();
//bli_error_checking_level_set( BLIS_NO_ERROR_CHECKING );
n_repeats = 3;
#ifndef PRINT
p_begin = 200;
p_end = 2000;
p_inc = 200;
m_input = -1;
n_input = -1;
k_input = -1;
#else
p_begin = 16;
p_end = 16;
p_inc = 1;
m_input = 5;
k_input = 6;
n_input = 4;
#endif
#if 1
//dt = BLIS_FLOAT;
dt = BLIS_DOUBLE;
#else
//dt = BLIS_SCOMPLEX;
dt = BLIS_DCOMPLEX;
#endif
transa = BLIS_NO_TRANSPOSE;
transb = BLIS_NO_TRANSPOSE;
bli_param_map_blis_to_netlib_trans( transa, &f77_transa );
bli_param_map_blis_to_netlib_trans( transb, &f77_transb );
for ( p = p_begin; p <= p_end; p += p_inc )
{
if ( m_input < 0 ) m = p * ( dim_t )abs(m_input);
else m = ( dim_t ) m_input;
if ( n_input < 0 ) n = p * ( dim_t )abs(n_input);
else n = ( dim_t ) n_input;
if ( k_input < 0 ) k = p * ( dim_t )abs(k_input);
else k = ( dim_t ) k_input;
bli_obj_create( dt, 1, 1, 0, 0, &alpha );
bli_obj_create( dt, 1, 1, 0, 0, &beta );
bli_obj_create( dt, m, k, 0, 0, &a );
bli_obj_create( dt, k, n, 0, 0, &b );
bli_obj_create( dt, m, n, 0, 0, &c );
bli_obj_create( dt, m, n, 0, 0, &c_save );
bli_randm( &a );
bli_randm( &b );
bli_randm( &c );
bli_obj_set_conjtrans( transa, a );
bli_obj_set_conjtrans( transb, b );
bli_setsc( (0.9/1.0), 0.2, &alpha );
bli_setsc( -(1.1/1.0), 0.3, &beta );
bli_copym( &c, &c_save );
dtime_save = DBL_MAX;
for ( r = 0; r < n_repeats; ++r )
{
bli_copym( &c_save, &c );
dtime = bli_clock();
#ifdef PRINT
bli_printm( "a", &a, "%4.1f", "" );
bli_printm( "b", &b, "%4.1f", "" );
bli_printm( "c", &c, "%4.1f", "" );
#endif
#ifdef BLIS
bli_gemm( &alpha,
&a,
&b,
&beta,
&c );
#else
if ( bli_is_float( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
float* alphap = bli_obj_buffer( alpha );
float* ap = bli_obj_buffer( a );
float* bp = bli_obj_buffer( b );
float* betap = bli_obj_buffer( beta );
float* cp = bli_obj_buffer( c );
sgemm_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_double( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
double* alphap = bli_obj_buffer( alpha );
double* ap = bli_obj_buffer( a );
double* bp = bli_obj_buffer( b );
double* betap = bli_obj_buffer( beta );
double* cp = bli_obj_buffer( c );
dgemm_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_scomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
scomplex* alphap = bli_obj_buffer( alpha );
scomplex* ap = bli_obj_buffer( a );
scomplex* bp = bli_obj_buffer( b );
scomplex* betap = bli_obj_buffer( beta );
scomplex* cp = bli_obj_buffer( c );
cgemm_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
else if ( bli_is_dcomplex( dt ) )
{
f77_int mm = bli_obj_length( c );
f77_int kk = bli_obj_width_after_trans( a );
f77_int nn = bli_obj_width( c );
f77_int lda = bli_obj_col_stride( a );
f77_int ldb = bli_obj_col_stride( b );
f77_int ldc = bli_obj_col_stride( c );
dcomplex* alphap = bli_obj_buffer( alpha );
dcomplex* ap = bli_obj_buffer( a );
dcomplex* bp = bli_obj_buffer( b );
dcomplex* betap = bli_obj_buffer( beta );
dcomplex* cp = bli_obj_buffer( c );
zgemm_( &f77_transa,
&f77_transb,
&mm,
&nn,
&kk,
alphap,
ap, &lda,
bp, &ldb,
betap,
cp, &ldc );
}
#endif
#ifdef PRINT
bli_printm( "c after", &c, "%4.1f", "" );
exit(1);
#endif
dtime_save = bli_clock_min_diff( dtime_save, dtime );
}
gflops = ( 2.0 * m * k * n ) / ( dtime_save * 1.0e9 );
if ( bli_is_complex( dt ) ) gflops *= 4.0;
#ifdef BLIS
printf( "data_gemm_blis" );
#else
printf( "data_gemm_%s", BLAS );
#endif
printf( "( %2lu, 1:5 ) = [ %4lu %4lu %4lu %10.3e %6.3f ];\n",
( unsigned long )(p - p_begin + 1)/p_inc + 1,
( unsigned long )m,
( unsigned long )k,
( unsigned long )n, dtime_save, gflops );
bli_obj_free( &alpha );
bli_obj_free( &beta );
bli_obj_free( &a );
bli_obj_free( &b );
bli_obj_free( &c );
bli_obj_free( &c_save );
}
bli_finalize();
return 0;
}