static void setup_board_eeprom_env(void)
{
char *name = "beagle_x15";
int rc;
rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
CONFIG_EEPROM_CHIP_ADDRESS);
if (rc)
goto invalid_eeprom;
if (board_is_x15()) {
if (board_is_x15_revb1())
name = "beagle_x15_revb1";
else
name = "beagle_x15";
} else if (board_is_am572x_evm()) {
if (board_is_am572x_evm_reva3())
name = "am57xx_evm_reva3";
else
name = "am57xx_evm";
} else if (board_is_am572x_idk()) {
name = "am572x_idk";
} else if (board_is_am571x_idk()) {
name = "am571x_idk";
} else {
printf("Unidentified board claims %s in eeprom header\n",
board_ti_get_name());
}
invalid_eeprom:
set_board_info_env(name);
}
int board_fit_config_name_match(const char *name)
{
if (board_is_x15()) {
if (board_is_x15_revb1()) {
if (!strcmp(name, "am57xx-beagle-x15-revb1"))
return 0;
} else if (board_is_x15_revc()) {
if (!strcmp(name, "am57xx-beagle-x15-revc"))
return 0;
} else if (!strcmp(name, "am57xx-beagle-x15")) {
return 0;
}
} else if (board_is_am572x_evm() &&
!strcmp(name, "am57xx-beagle-x15")) {
return 0;
} else if (board_is_am572x_idk() && !strcmp(name, "am572x-idk")) {
return 0;
} else if (board_is_am574x_idk() && !strcmp(name, "am574x-idk")) {
return 0;
} else if (board_is_am571x_idk() && !strcmp(name, "am571x-idk")) {
return 0;
}
return -1;
}
void recalibrate_iodelay(void)
{
const struct pad_conf_entry *pconf;
const struct iodelay_cfg_entry *iod;
int pconf_sz, iod_sz;
int ret;
if (board_is_am572x_idk()) {
pconf = core_padconf_array_essential_am572x_idk;
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
iod = iodelay_cfg_array_am572x_idk;
iod_sz = ARRAY_SIZE(iodelay_cfg_array_am572x_idk);
} else if (board_is_am571x_idk()) {
pconf = core_padconf_array_essential_am571x_idk;
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am571x_idk);
iod = iodelay_cfg_array_am571x_idk;
iod_sz = ARRAY_SIZE(iodelay_cfg_array_am571x_idk);
} else {
/* Common for X15/GPEVM */
pconf = core_padconf_array_essential_x15;
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_x15);
/* There never was an SR1.0 X15.. So.. */
if (omap_revision() == DRA752_ES1_1) {
iod = iodelay_cfg_array_x15_sr1_1;
iod_sz = ARRAY_SIZE(iodelay_cfg_array_x15_sr1_1);
} else {
/* Since full production should switch to SR2.0 */
iod = iodelay_cfg_array_x15_sr2_0;
iod_sz = ARRAY_SIZE(iodelay_cfg_array_x15_sr2_0);
}
}
/* Setup I/O isolation */
ret = __recalibrate_iodelay_start();
if (ret)
goto err;
/* Do the muxing here */
do_set_mux32((*ctrl)->control_padconf_core_base, pconf, pconf_sz);
/* Now do the weird minor deltas that should be safe */
if (board_is_x15() || board_is_am572x_evm()) {
if (board_is_x15_revb1() || board_is_am572x_evm_reva3()) {
pconf = core_padconf_array_delta_x15_sr2_0;
pconf_sz = ARRAY_SIZE(core_padconf_array_delta_x15_sr2_0);
} else {
pconf = core_padconf_array_delta_x15_sr1_1;
pconf_sz = ARRAY_SIZE(core_padconf_array_delta_x15_sr1_1);
}
do_set_mux32((*ctrl)->control_padconf_core_base, pconf, pconf_sz);
}
if (board_is_am571x_idk()) {
if (am571x_idk_needs_lcd()) {
pconf = core_padconf_array_vout_am571x_idk;
pconf_sz = ARRAY_SIZE(core_padconf_array_vout_am571x_idk);
} else {
pconf = core_padconf_array_icss1eth_am571x_idk;
pconf_sz = ARRAY_SIZE(core_padconf_array_icss1eth_am571x_idk);
}
do_set_mux32((*ctrl)->control_padconf_core_base, pconf, pconf_sz);
}
/* Setup IOdelay configuration */
ret = do_set_iodelay((*ctrl)->iodelay_config_base, iod, iod_sz);
err:
/* Closeup.. remove isolation */
__recalibrate_iodelay_end(ret);
}