void GenCollectorPolicy::assert_size_info() {
CollectorPolicy::assert_size_info();
// GenCollectorPolicy::initialize_size_info may update the MaxNewSize
assert(MaxNewSize < MaxHeapSize, "Ergonomics decided on incompatible maximum young and heap sizes");
assert(NewSize == _initial_young_size, "Discrepancy between NewSize flag and local storage");
assert(MaxNewSize == _max_young_size, "Discrepancy between MaxNewSize flag and local storage");
assert(OldSize == _initial_old_size, "Discrepancy between OldSize flag and local storage");
assert(_min_young_size <= _initial_young_size, "Ergonomics decided on incompatible minimum and initial young gen sizes");
assert(_initial_young_size <= _max_young_size, "Ergonomics decided on incompatible initial and maximum young gen sizes");
assert(_min_young_size % _gen_alignment == 0, "_min_young_size alignment");
assert(_initial_young_size % _gen_alignment == 0, "_initial_young_size alignment");
assert(_max_young_size % _gen_alignment == 0, "_max_young_size alignment");
assert(_min_young_size <= bound_minus_alignment(_min_young_size, _min_heap_byte_size),
"Ergonomics made minimum young generation larger than minimum heap");
assert(_initial_young_size <= bound_minus_alignment(_initial_young_size, _initial_heap_byte_size),
"Ergonomics made initial young generation larger than initial heap");
assert(_max_young_size <= bound_minus_alignment(_max_young_size, _max_heap_byte_size),
"Ergonomics made maximum young generation lager than maximum heap");
assert(_min_old_size <= _initial_old_size, "Ergonomics decided on incompatible minimum and initial old gen sizes");
assert(_initial_old_size <= _max_old_size, "Ergonomics decided on incompatible initial and maximum old gen sizes");
assert(_max_old_size % _gen_alignment == 0, "_max_old_size alignment");
assert(_initial_old_size % _gen_alignment == 0, "_initial_old_size alignment");
assert(_max_heap_byte_size <= (_max_young_size + _max_old_size), "Total maximum heap sizes must be sum of generation maximum sizes");
assert(_min_young_size + _min_old_size <= _min_heap_byte_size, "Minimum generation sizes exceed minimum heap size");
assert(_initial_young_size + _initial_old_size == _initial_heap_byte_size, "Initial generation sizes should match initial heap size");
assert(_max_young_size + _max_old_size == _max_heap_byte_size, "Maximum generation sizes should match maximum heap size");
}
// Values set on the command line win over any ergonomically
// set command line parameters.
// Ergonomic choice of parameters are done before this
// method is called. Values for command line parameters such as NewSize
// and MaxNewSize feed those ergonomic choices into this method.
// This method makes the final generation sizings consistent with
// themselves and with overall heap sizings.
// In the absence of explicitly set command line flags, policies
// such as the use of NewRatio are used to size the generation.
void GenCollectorPolicy::initialize_size_info() {
CollectorPolicy::initialize_size_info();
// _space_alignment is used for alignment within a generation.
// There is additional alignment done down stream for some
// collectors that sometimes causes unwanted rounding up of
// generations sizes.
// Determine maximum size of gen0
size_t max_new_size = 0;
if (!FLAG_IS_DEFAULT(MaxNewSize)) {
max_new_size = MaxNewSize;
} else {
max_new_size = scale_by_NewRatio_aligned(_max_heap_byte_size);
// Bound the maximum size by NewSize below (since it historically
// would have been NewSize and because the NewRatio calculation could
// yield a size that is too small) and bound it by MaxNewSize above.
// Ergonomics plays here by previously calculating the desired
// NewSize and MaxNewSize.
max_new_size = MIN2(MAX2(max_new_size, NewSize), MaxNewSize);
}
assert(max_new_size > 0, "All paths should set max_new_size");
// Given the maximum gen0 size, determine the initial and
// minimum gen0 sizes.
if (_max_heap_byte_size == _min_heap_byte_size) {
// The maximum and minimum heap sizes are the same so
// the generations minimum and initial must be the
// same as its maximum.
_min_gen0_size = max_new_size;
_initial_gen0_size = max_new_size;
_max_gen0_size = max_new_size;
} else {
size_t desired_new_size = 0;
if (FLAG_IS_CMDLINE(NewSize)) {
// If NewSize is set on the command line, we must use it as
// the initial size and it also makes sense to use it as the
// lower limit.
_min_gen0_size = NewSize;
desired_new_size = NewSize;
max_new_size = MAX2(max_new_size, NewSize);
} else if (FLAG_IS_ERGO(NewSize)) {
// If NewSize is set ergonomically, we should use it as a lower
// limit, but use NewRatio to calculate the initial size.
_min_gen0_size = NewSize;
desired_new_size =
MAX2(scale_by_NewRatio_aligned(_initial_heap_byte_size), NewSize);
max_new_size = MAX2(max_new_size, NewSize);
} else {
// For the case where NewSize is the default, use NewRatio
// to size the minimum and initial generation sizes.
// Use the default NewSize as the floor for these values. If
// NewRatio is overly large, the resulting sizes can be too
// small.
_min_gen0_size = MAX2(scale_by_NewRatio_aligned(_min_heap_byte_size), NewSize);
desired_new_size =
MAX2(scale_by_NewRatio_aligned(_initial_heap_byte_size), NewSize);
}
assert(_min_gen0_size > 0, "Sanity check");
_initial_gen0_size = desired_new_size;
_max_gen0_size = max_new_size;
// At this point the desirable initial and minimum sizes have been
// determined without regard to the maximum sizes.
// Bound the sizes by the corresponding overall heap sizes.
_min_gen0_size = bound_minus_alignment(_min_gen0_size, _min_heap_byte_size);
_initial_gen0_size = bound_minus_alignment(_initial_gen0_size, _initial_heap_byte_size);
_max_gen0_size = bound_minus_alignment(_max_gen0_size, _max_heap_byte_size);
// At this point all three sizes have been checked against the
// maximum sizes but have not been checked for consistency
// among the three.
// Final check min <= initial <= max
_min_gen0_size = MIN2(_min_gen0_size, _max_gen0_size);
_initial_gen0_size = MAX2(MIN2(_initial_gen0_size, _max_gen0_size), _min_gen0_size);
_min_gen0_size = MIN2(_min_gen0_size, _initial_gen0_size);
}
// Write back to flags if necessary
if (NewSize != _initial_gen0_size) {
FLAG_SET_ERGO(uintx, NewSize, _initial_gen0_size);
}
if (MaxNewSize != _max_gen0_size) {
FLAG_SET_ERGO(uintx, MaxNewSize, _max_gen0_size);
}
if (PrintGCDetails && Verbose) {
gclog_or_tty->print_cr("1: Minimum gen0 " SIZE_FORMAT " Initial gen0 "
SIZE_FORMAT " Maximum gen0 " SIZE_FORMAT,
_min_gen0_size, _initial_gen0_size, _max_gen0_size);
}
DEBUG_ONLY(GenCollectorPolicy::assert_size_info();)
}
// Values set on the command line win over any ergonomically
// set command line parameters.
// Ergonomic choice of parameters are done before this
// method is called. Values for command line parameters such as NewSize
// and MaxNewSize feed those ergonomic choices into this method.
// This method makes the final generation sizings consistent with
// themselves and with overall heap sizings.
// In the absence of explicitly set command line flags, policies
// such as the use of NewRatio are used to size the generation.
void GenCollectorPolicy::initialize_size_info() {
CollectorPolicy::initialize_size_info();
// min_alignment() is used for alignment within a generation.
// There is additional alignment done down stream for some
// collectors that sometimes causes unwanted rounding up of
// generations sizes.
// Determine maximum size of gen0
size_t max_new_size = 0;
if (FLAG_IS_CMDLINE(MaxNewSize)) {
if (MaxNewSize < min_alignment()) {
max_new_size = min_alignment();
} else if (MaxNewSize >= max_heap_byte_size()) {
max_new_size = align_size_down(max_heap_byte_size() - min_alignment(),
min_alignment());
warning("MaxNewSize (" SIZE_FORMAT "k) is equal to or "
"greater than the entire heap (" SIZE_FORMAT "k). A "
"new generation size of " SIZE_FORMAT "k will be used.",
MaxNewSize/K, max_heap_byte_size()/K, max_new_size/K);
} else {
max_new_size = align_size_down(MaxNewSize, min_alignment());
}
// The case for FLAG_IS_ERGO(MaxNewSize) could be treated
// specially at this point to just use an ergonomically set
// MaxNewSize to set max_new_size. For cases with small
// heaps such a policy often did not work because the MaxNewSize
// was larger than the entire heap. The interpretation given
// to ergonomically set flags is that the flags are set
// by different collectors for their own special needs but
// are not allowed to badly shape the heap. This allows the
// different collectors to decide what's best for themselves
// without having to factor in the overall heap shape. It
// can be the case in the future that the collectors would
// only make "wise" ergonomics choices and this policy could
// just accept those choices. The choices currently made are
// not always "wise".
} else {
max_new_size = scale_by_NewRatio_aligned(max_heap_byte_size());
// Bound the maximum size by NewSize below (since it historically
// would have been NewSize and because the NewRatio calculation could
// yield a size that is too small) and bound it by MaxNewSize above.
// Ergonomics plays here by previously calculating the desired
// NewSize and MaxNewSize.
max_new_size = MIN2(MAX2(max_new_size, (size_t)NewSize), (size_t)MaxNewSize);
}
assert(max_new_size > 0, "All paths should set max_new_size");
// Given the maximum gen0 size, determine the initial and
// minimum sizes.
if (max_heap_byte_size() == min_heap_byte_size()) {
// The maximum and minimum heap sizes are the same so
// the generations minimum and initial must be the
// same as its maximum.
set_min_gen0_size(max_new_size);
set_initial_gen0_size(max_new_size);
set_max_gen0_size(max_new_size);
} else {
size_t desired_new_size = 0;
if (!FLAG_IS_DEFAULT(NewSize)) {
// If NewSize is set ergonomically (for example by cms), it
// would make sense to use it. If it is used, also use it
// to set the initial size. Although there is no reason
// the minimum size and the initial size have to be the same,
// the current implementation gets into trouble during the calculation
// of the tenured generation sizes if they are different.
// Note that this makes the initial size and the minimum size
// generally small compared to the NewRatio calculation.
_min_gen0_size = NewSize;
desired_new_size = NewSize;
max_new_size = MAX2(max_new_size, (size_t) NewSize);
} else {
// For the case where NewSize is the default, use NewRatio
// to size the minimum and initial generation sizes.
// Use the default NewSize as the floor for these values. If
// NewRatio is overly large, the resulting sizes can be too
// small.
_min_gen0_size = MAX2(scale_by_NewRatio_aligned(min_heap_byte_size()),
(size_t) NewSize);
desired_new_size =
MAX2(scale_by_NewRatio_aligned(initial_heap_byte_size()),
(size_t) NewSize);
}
assert(_min_gen0_size > 0, "Sanity check");
set_initial_gen0_size(desired_new_size);
set_max_gen0_size(max_new_size);
// At this point the desirable initial and minimum sizes have been
// determined without regard to the maximum sizes.
// Bound the sizes by the corresponding overall heap sizes.
set_min_gen0_size(
bound_minus_alignment(_min_gen0_size, min_heap_byte_size()));
set_initial_gen0_size(
bound_minus_alignment(_initial_gen0_size, initial_heap_byte_size()));
set_max_gen0_size(
bound_minus_alignment(_max_gen0_size, max_heap_byte_size()));
// At this point all three sizes have been checked against the
// maximum sizes but have not been checked for consistency
// among the three.
// Final check min <= initial <= max
set_min_gen0_size(MIN2(_min_gen0_size, _max_gen0_size));
set_initial_gen0_size(
MAX2(MIN2(_initial_gen0_size, _max_gen0_size), _min_gen0_size));
set_min_gen0_size(MIN2(_min_gen0_size, _initial_gen0_size));
}
if (PrintGCDetails && Verbose) {
gclog_or_tty->print_cr("Minimum gen0 " SIZE_FORMAT " Initial gen0 "
SIZE_FORMAT " Maximum gen0 " SIZE_FORMAT,
min_gen0_size(), initial_gen0_size(), max_gen0_size());
}
}
// Minimum sizes of the generations may be different than
// the initial sizes. An inconsistency is permitted here
// in the total size that can be specified explicitly by
// command line specification of OldSize and NewSize and
// also a command line specification of -Xms. Issue a warning
// but allow the values to pass.
void GenCollectorPolicy::initialize_size_info() {
CollectorPolicy::initialize_size_info();
_initial_young_size = NewSize;
_max_young_size = MaxNewSize;
_initial_old_size = OldSize;
// Determine maximum size of the young generation.
if (FLAG_IS_DEFAULT(MaxNewSize)) {
_max_young_size = scale_by_NewRatio_aligned(_max_heap_byte_size);
// Bound the maximum size by NewSize below (since it historically
// would have been NewSize and because the NewRatio calculation could
// yield a size that is too small) and bound it by MaxNewSize above.
// Ergonomics plays here by previously calculating the desired
// NewSize and MaxNewSize.
_max_young_size = MIN2(MAX2(_max_young_size, _initial_young_size), MaxNewSize);
}
// Given the maximum young size, determine the initial and
// minimum young sizes.
if (_max_heap_byte_size == _initial_heap_byte_size) {
// The maximum and initial heap sizes are the same so the generation's
// initial size must be the same as it maximum size. Use NewSize as the
// size if set on command line.
_max_young_size = FLAG_IS_CMDLINE(NewSize) ? NewSize : _max_young_size;
_initial_young_size = _max_young_size;
// Also update the minimum size if min == initial == max.
if (_max_heap_byte_size == _min_heap_byte_size) {
_min_young_size = _max_young_size;
}
} else {
if (FLAG_IS_CMDLINE(NewSize)) {
// If NewSize is set on the command line, we should use it as
// the initial size, but make sure it is within the heap bounds.
_initial_young_size =
MIN2(_max_young_size, bound_minus_alignment(NewSize, _initial_heap_byte_size));
_min_young_size = bound_minus_alignment(_initial_young_size, _min_heap_byte_size);
} else {
// For the case where NewSize is not set on the command line, use
// NewRatio to size the initial generation size. Use the current
// NewSize as the floor, because if NewRatio is overly large, the resulting
// size can be too small.
_initial_young_size =
MIN2(_max_young_size, MAX2(scale_by_NewRatio_aligned(_initial_heap_byte_size), NewSize));
}
}
log_trace(gc, heap)("1: Minimum young " SIZE_FORMAT " Initial young " SIZE_FORMAT " Maximum young " SIZE_FORMAT,
_min_young_size, _initial_young_size, _max_young_size);
// At this point the minimum, initial and maximum sizes
// of the overall heap and of the young generation have been determined.
// The maximum old size can be determined from the maximum young
// and maximum heap size since no explicit flags exist
// for setting the old generation maximum.
_max_old_size = MAX2(_max_heap_byte_size - _max_young_size, _gen_alignment);
// If no explicit command line flag has been set for the
// old generation size, use what is left.
if (!FLAG_IS_CMDLINE(OldSize)) {
// The user has not specified any value but the ergonomics
// may have chosen a value (which may or may not be consistent
// with the overall heap size). In either case make
// the minimum, maximum and initial sizes consistent
// with the young sizes and the overall heap sizes.
_min_old_size = _gen_alignment;
_initial_old_size = MIN2(_max_old_size, MAX2(_initial_heap_byte_size - _initial_young_size, _min_old_size));
// _max_old_size has already been made consistent above.
} else {
// OldSize has been explicitly set on the command line. Use it
// for the initial size but make sure the minimum allow a young
// generation to fit as well.
// If the user has explicitly set an OldSize that is inconsistent
// with other command line flags, issue a warning.
// The generation minimums and the overall heap minimum should
// be within one generation alignment.
if (_initial_old_size > _max_old_size) {
log_warning(gc, ergo)("Inconsistency between maximum heap size and maximum "
"generation sizes: using maximum heap = " SIZE_FORMAT
", -XX:OldSize flag is being ignored",
_max_heap_byte_size);
_initial_old_size = _max_old_size;
}
_min_old_size = MIN2(_initial_old_size, _min_heap_byte_size - _min_young_size);
}
// The initial generation sizes should match the initial heap size,
// if not issue a warning and resize the generations. This behavior
// differs from JDK8 where the generation sizes have higher priority
// than the initial heap size.
if ((_initial_old_size + _initial_young_size) != _initial_heap_byte_size) {
log_warning(gc, ergo)("Inconsistency between generation sizes and heap size, resizing "
"the generations to fit the heap.");
size_t desired_young_size = _initial_heap_byte_size - _initial_old_size;
if (_initial_heap_byte_size < _initial_old_size) {
// Old want all memory, use minimum for young and rest for old
_initial_young_size = _min_young_size;
_initial_old_size = _initial_heap_byte_size - _min_young_size;
} else if (desired_young_size > _max_young_size) {
// Need to increase both young and old generation
_initial_young_size = _max_young_size;
_initial_old_size = _initial_heap_byte_size - _max_young_size;
} else if (desired_young_size < _min_young_size) {
// Need to decrease both young and old generation
_initial_young_size = _min_young_size;
_initial_old_size = _initial_heap_byte_size - _min_young_size;
} else {
// The young generation boundaries allow us to only update the
// young generation.
_initial_young_size = desired_young_size;
}
log_trace(gc, heap)("2: Minimum young " SIZE_FORMAT " Initial young " SIZE_FORMAT " Maximum young " SIZE_FORMAT,
_min_young_size, _initial_young_size, _max_young_size);
}
// Write back to flags if necessary.
if (NewSize != _initial_young_size) {
FLAG_SET_ERGO(size_t, NewSize, _initial_young_size);
}
if (MaxNewSize != _max_young_size) {
FLAG_SET_ERGO(size_t, MaxNewSize, _max_young_size);
}
if (OldSize != _initial_old_size) {
FLAG_SET_ERGO(size_t, OldSize, _initial_old_size);
}
log_trace(gc, heap)("Minimum old " SIZE_FORMAT " Initial old " SIZE_FORMAT " Maximum old " SIZE_FORMAT,
_min_old_size, _initial_old_size, _max_old_size);
DEBUG_ONLY(GenCollectorPolicy::assert_size_info();)
}
void GenCollectorPolicy::initialize_flags() {
CollectorPolicy::initialize_flags();
assert(_gen_alignment != 0, "Generation alignment not set up properly");
assert(_heap_alignment >= _gen_alignment,
"heap_alignment: " SIZE_FORMAT " less than gen_alignment: " SIZE_FORMAT,
_heap_alignment, _gen_alignment);
assert(_gen_alignment % _space_alignment == 0,
"gen_alignment: " SIZE_FORMAT " not aligned by space_alignment: " SIZE_FORMAT,
_gen_alignment, _space_alignment);
assert(_heap_alignment % _gen_alignment == 0,
"heap_alignment: " SIZE_FORMAT " not aligned by gen_alignment: " SIZE_FORMAT,
_heap_alignment, _gen_alignment);
// All generational heaps have a young gen; handle those flags here
// Make sure the heap is large enough for two generations
size_t smallest_new_size = young_gen_size_lower_bound();
size_t smallest_heap_size = align_size_up(smallest_new_size + old_gen_size_lower_bound(),
_heap_alignment);
if (MaxHeapSize < smallest_heap_size) {
FLAG_SET_ERGO(size_t, MaxHeapSize, smallest_heap_size);
_max_heap_byte_size = MaxHeapSize;
}
// If needed, synchronize _min_heap_byte size and _initial_heap_byte_size
if (_min_heap_byte_size < smallest_heap_size) {
_min_heap_byte_size = smallest_heap_size;
if (InitialHeapSize < _min_heap_byte_size) {
FLAG_SET_ERGO(size_t, InitialHeapSize, smallest_heap_size);
_initial_heap_byte_size = smallest_heap_size;
}
}
// Make sure NewSize allows an old generation to fit even if set on the command line
if (FLAG_IS_CMDLINE(NewSize) && NewSize >= _initial_heap_byte_size) {
log_warning(gc, ergo)("NewSize was set larger than initial heap size, will use initial heap size.");
FLAG_SET_ERGO(size_t, NewSize, bound_minus_alignment(NewSize, _initial_heap_byte_size));
}
// Now take the actual NewSize into account. We will silently increase NewSize
// if the user specified a smaller or unaligned value.
size_t bounded_new_size = bound_minus_alignment(NewSize, MaxHeapSize);
bounded_new_size = MAX2(smallest_new_size, (size_t)align_size_down(bounded_new_size, _gen_alignment));
if (bounded_new_size != NewSize) {
FLAG_SET_ERGO(size_t, NewSize, bounded_new_size);
}
_min_young_size = smallest_new_size;
_initial_young_size = NewSize;
if (!FLAG_IS_DEFAULT(MaxNewSize)) {
if (MaxNewSize >= MaxHeapSize) {
// Make sure there is room for an old generation
size_t smaller_max_new_size = MaxHeapSize - _gen_alignment;
if (FLAG_IS_CMDLINE(MaxNewSize)) {
log_warning(gc, ergo)("MaxNewSize (" SIZE_FORMAT "k) is equal to or greater than the entire "
"heap (" SIZE_FORMAT "k). A new max generation size of " SIZE_FORMAT "k will be used.",
MaxNewSize/K, MaxHeapSize/K, smaller_max_new_size/K);
}
FLAG_SET_ERGO(size_t, MaxNewSize, smaller_max_new_size);
if (NewSize > MaxNewSize) {
FLAG_SET_ERGO(size_t, NewSize, MaxNewSize);
_initial_young_size = NewSize;
}
} else if (MaxNewSize < _initial_young_size) {
FLAG_SET_ERGO(size_t, MaxNewSize, _initial_young_size);
} else if (!is_size_aligned(MaxNewSize, _gen_alignment)) {
FLAG_SET_ERGO(size_t, MaxNewSize, align_size_down(MaxNewSize, _gen_alignment));
}
_max_young_size = MaxNewSize;
}
if (NewSize > MaxNewSize) {
// At this point this should only happen if the user specifies a large NewSize and/or
// a small (but not too small) MaxNewSize.
if (FLAG_IS_CMDLINE(MaxNewSize)) {
log_warning(gc, ergo)("NewSize (" SIZE_FORMAT "k) is greater than the MaxNewSize (" SIZE_FORMAT "k). "
"A new max generation size of " SIZE_FORMAT "k will be used.",
NewSize/K, MaxNewSize/K, NewSize/K);
}
FLAG_SET_ERGO(size_t, MaxNewSize, NewSize);
_max_young_size = MaxNewSize;
}
if (SurvivorRatio < 1 || NewRatio < 1) {
vm_exit_during_initialization("Invalid young gen ratio specified");
}
if (OldSize < old_gen_size_lower_bound()) {
FLAG_SET_ERGO(size_t, OldSize, old_gen_size_lower_bound());
}
if (!is_size_aligned(OldSize, _gen_alignment)) {
FLAG_SET_ERGO(size_t, OldSize, align_size_down(OldSize, _gen_alignment));
}
if (FLAG_IS_CMDLINE(OldSize) && FLAG_IS_DEFAULT(MaxHeapSize)) {
// NewRatio will be used later to set the young generation size so we use
// it to calculate how big the heap should be based on the requested OldSize
// and NewRatio.
assert(NewRatio > 0, "NewRatio should have been set up earlier");
size_t calculated_heapsize = (OldSize / NewRatio) * (NewRatio + 1);
calculated_heapsize = align_size_up(calculated_heapsize, _heap_alignment);
FLAG_SET_ERGO(size_t, MaxHeapSize, calculated_heapsize);
_max_heap_byte_size = MaxHeapSize;
FLAG_SET_ERGO(size_t, InitialHeapSize, calculated_heapsize);
_initial_heap_byte_size = InitialHeapSize;
}
// Adjust NewSize and OldSize or MaxHeapSize to match each other
if (NewSize + OldSize > MaxHeapSize) {
if (FLAG_IS_CMDLINE(MaxHeapSize)) {
// Somebody has set a maximum heap size with the intention that we should not
// exceed it. Adjust New/OldSize as necessary.
size_t calculated_size = NewSize + OldSize;
double shrink_factor = (double) MaxHeapSize / calculated_size;
size_t smaller_new_size = align_size_down((size_t)(NewSize * shrink_factor), _gen_alignment);
FLAG_SET_ERGO(size_t, NewSize, MAX2(young_gen_size_lower_bound(), smaller_new_size));
_initial_young_size = NewSize;
// OldSize is already aligned because above we aligned MaxHeapSize to
// _heap_alignment, and we just made sure that NewSize is aligned to
// _gen_alignment. In initialize_flags() we verified that _heap_alignment
// is a multiple of _gen_alignment.
FLAG_SET_ERGO(size_t, OldSize, MaxHeapSize - NewSize);
} else {
FLAG_SET_ERGO(size_t, MaxHeapSize, align_size_up(NewSize + OldSize, _heap_alignment));
_max_heap_byte_size = MaxHeapSize;
}
}
// Update NewSize, if possible, to avoid sizing the young gen too small when only
// OldSize is set on the command line.
if (FLAG_IS_CMDLINE(OldSize) && !FLAG_IS_CMDLINE(NewSize)) {
if (OldSize < _initial_heap_byte_size) {
size_t new_size = _initial_heap_byte_size - OldSize;
// Need to compare against the flag value for max since _max_young_size
// might not have been set yet.
if (new_size >= _min_young_size && new_size <= MaxNewSize) {
FLAG_SET_ERGO(size_t, NewSize, new_size);
_initial_young_size = NewSize;
}
}
}
always_do_update_barrier = UseConcMarkSweepGC;
DEBUG_ONLY(GenCollectorPolicy::assert_flags();)
}
