static void __init bravo_init(void)
{
int ret;
printk("bravo_init() revision=%d\n", system_rev);
printk(KERN_INFO "%s: microp version = %s\n", __func__, microp_ver);
/* Must set msm_hw_reset_hook before first proc comm */
msm_hw_reset_hook = bravo_reset;
if (system_rev >= 2) {
mdp_pmem_pdata.start = MSM_PMEM_MDP_BASE + MSM_MEM_128MB_OFFSET;
android_pmem_adsp_pdata.start = MSM_PMEM_ADSP_BASE + MSM_MEM_128MB_OFFSET;
}
gpio_request(BRAVO_GPIO_LS_EN, "ls_en");
msm_acpu_clock_init(&bravo_clock_data);
perflock_init(&bravo_perflock_data);
#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
msm_serial_debug_init(MSM_UART1_PHYS, INT_UART1,
&msm_device_uart1.dev, 1, MSM_GPIO_TO_INT(139));
#endif
#ifdef CONFIG_ARCH_QSD8X50
bt_export_bd_address();
#endif
#ifdef CONFIG_SERIAL_MSM_HS
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
msm_device_uart_dm1.name = "msm_serial_hs_bcm"; /* for bcm */
#endif
bravo_config_serial_debug_gpios();
config_gpio_table(camera_off_gpio_table,
ARRAY_SIZE(camera_off_gpio_table));
gpio_request(BRAVO_GPIO_TP_LS_EN, "tp_ls_en");
gpio_direction_output(BRAVO_GPIO_TP_LS_EN, 0);
gpio_request(BRAVO_GPIO_TP_EN, "tp_en");
gpio_direction_output(BRAVO_GPIO_TP_EN, 0);
bravo_audio_init();
msm_device_i2c_init();
#ifdef CONFIG_MICROP_COMMON
bravo_microp_init();
#endif
/* set the gpu power rail to manual mode so clk en/dis will not
* turn off gpu power, and hang it on resume */
bravo_kgsl_power_rail_mode(0);
bravo_kgsl_power(true);
platform_add_devices(devices, ARRAY_SIZE(devices));
bravo_init_panel();
if (!opt_usb_h2w_sw) {
#ifdef CONFIG_USB_FUNCTION
msm_register_usb_phy_init_seq(bravo_phy_init_seq);
msm_add_usb_devices(bravo_usb_phy_reset, NULL);
#endif
#ifdef CONFIG_USB_ANDROID
bravo_add_usb_devices();
#endif
}
for (ret = 0; ret < ARRAY_SIZE(i2c_devices); ret++) {
if (!strcmp(i2c_devices[ret].type, AKM8973_I2C_NAME))
i2c_devices[ret].irq = MSM_GPIO_TO_INT(BRAVO_GPIO_COMPASS_INT);
}
compass_platform_data.intr = BRAVO_GPIO_COMPASS_INT;
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
ret = bravo_init_mmc(system_rev);
if (ret != 0)
pr_crit("%s: Unable to initialize MMC\n", __func__);
ret = platform_device_register(&android_timed_gpios);
if (ret != 0)
pr_err("failed to register vibrator\n");
headset_init();
}
static void __init bravo_init(void)
{
int ret;
printk("bravo_init() revision=%d\n", system_rev);
if (is_cdma_version(system_rev))
smd_set_channel_list(smd_cdma_default_channels,
ARRAY_SIZE(smd_cdma_default_channels));
msm_hw_reset_hook = bravo_reset;
if (is_cdma_version(system_rev))
msm_acpu_clock_init(&bravo_cdma_clock_data);
else
msm_acpu_clock_init(&bravo_clock_data);
msm_serial_debug_init(MSM_UART1_PHYS, INT_UART1,
&msm_device_uart1.dev, 1, MSM_GPIO_TO_INT(139));
config_gpio_table(misc_gpio_table, ARRAY_SIZE(misc_gpio_table));
if (is_cdma_version(system_rev)) {
bcm_bt_lpm_pdata.gpio_wake = BRAVO_CDMA_GPIO_BT_WAKE;
bravo_flashlight_data.torch = BRAVO_CDMA_GPIO_FLASHLIGHT_TORCH;
config_gpio_table(bt_gpio_table_rev_CX, ARRAY_SIZE(bt_gpio_table_rev_CX));
} else {
config_gpio_table(bt_gpio_table, ARRAY_SIZE(bt_gpio_table));
}
gpio_request(BRAVO_GPIO_TP_LS_EN, "tp_ls_en");
gpio_direction_output(BRAVO_GPIO_TP_LS_EN, 0);
gpio_request(BRAVO_GPIO_TP_EN, "tp_en");
gpio_direction_output(BRAVO_GPIO_TP_EN, 0);
// gpio_request(BRAVO_GPIO_PROXIMITY_EN, "proximity_en");
// gpio_direction_output(BRAVO_GPIO_PROXIMITY_EN, 1);
gpio_request(BRAVO_GPIO_LS_EN_N, "ls_en");
gpio_request(BRAVO_GPIO_COMPASS_RST_N, "compass_rst");
gpio_direction_output(BRAVO_GPIO_COMPASS_RST_N, 1);
gpio_request(BRAVO_GPIO_COMPASS_INT_N, "compass_int");
gpio_direction_input(BRAVO_GPIO_COMPASS_INT_N);
gpio_request(BRAVO_GPIO_DS2482_SLP_N, "ds2482_slp_n");
/* set the gpu power rail to manual mode so clk en/dis will not
* turn off gpu power, and hang it on resume */
bravo_kgsl_power_rail_mode(0);
bravo_kgsl_power(true);
msm_device_hsusb.dev.platform_data = &msm_hsusb_pdata;
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
platform_add_devices(devices, ARRAY_SIZE(devices));
i2c_register_board_info(0, base_i2c_devices,
ARRAY_SIZE(base_i2c_devices));
if (is_cdma_version(system_rev)) {
i2c_register_board_info(0, rev_CX_i2c_devices,
ARRAY_SIZE(rev_CX_i2c_devices));
}
ret = bravo_init_mmc(system_rev, debug_uart);
if (ret != 0)
pr_crit("%s: Unable to initialize MMC\n", __func__);
bravo_audio_init();
bravo_headset_init();
platform_device_register(&bravo_timed_gpios);
ds2784_battery_init();
serialno_setup(board_serialno());
}
