Beispiel #1
0
/*
 * btvacuumscan --- scan the index for VACUUMing purposes
 *
 * This combines the functions of looking for leaf tuples that are deletable
 * according to the vacuum callback, looking for empty pages that can be
 * deleted, and looking for old deleted pages that can be recycled.  Both
 * btbulkdelete and btvacuumcleanup invoke this (the latter only if no
 * btbulkdelete call occurred).
 *
 * The caller is responsible for initially allocating/zeroing a stats struct
 * and for obtaining a vacuum cycle ID if necessary.
 */
static void
btvacuumscan(IndexVacuumInfo *info, IndexBulkDeleteResult *stats,
			 IndexBulkDeleteCallback callback, void *callback_state,
			 BTCycleId cycleid)
{
	MIRROREDLOCK_BUFMGR_VERIFY_NO_LOCK_LEAK_DECLARE;

	Relation	rel = info->index;
	BTVacState	vstate;
	BlockNumber num_pages;
	BlockNumber blkno;
	bool		needLock;

	MIRROREDLOCK_BUFMGR_VERIFY_NO_LOCK_LEAK_ENTER;

	/*
	 * Reset counts that will be incremented during the scan; needed in case
	 * of multiple scans during a single VACUUM command
	 */
	stats->num_index_tuples = 0;
	stats->pages_deleted = 0;

	/* Set up info to pass down to btvacuumpage */
	vstate.info = info;
	vstate.stats = stats;
	vstate.callback = callback;
	vstate.callback_state = callback_state;
	vstate.cycleid = cycleid;
	vstate.freePages = NULL;	/* temporarily */
	vstate.nFreePages = 0;
	vstate.maxFreePages = 0;
	vstate.totFreePages = 0;

	/* Create a temporary memory context to run _bt_pagedel in */
	vstate.pagedelcontext = AllocSetContextCreate(CurrentMemoryContext,
												  "_bt_pagedel",
												  ALLOCSET_DEFAULT_MINSIZE,
												  ALLOCSET_DEFAULT_INITSIZE,
												  ALLOCSET_DEFAULT_MAXSIZE);

	/*
	 * The outer loop iterates over all index pages except the metapage, in
	 * physical order (we hope the kernel will cooperate in providing
	 * read-ahead for speed).  It is critical that we visit all leaf pages,
	 * including ones added after we start the scan, else we might fail to
	 * delete some deletable tuples.  Hence, we must repeatedly check the
	 * relation length.  We must acquire the relation-extension lock while
	 * doing so to avoid a race condition: if someone else is extending the
	 * relation, there is a window where bufmgr/smgr have created a new
	 * all-zero page but it hasn't yet been write-locked by _bt_getbuf(). If
	 * we manage to scan such a page here, we'll improperly assume it can be
	 * recycled.  Taking the lock synchronizes things enough to prevent a
	 * problem: either num_pages won't include the new page, or _bt_getbuf
	 * already has write lock on the buffer and it will be fully initialized
	 * before we can examine it.  (See also vacuumlazy.c, which has the same
	 * issue.)	Also, we need not worry if a page is added immediately after
	 * we look; the page splitting code already has write-lock on the left
	 * page before it adds a right page, so we must already have processed any
	 * tuples due to be moved into such a page.
	 *
	 * We can skip locking for new or temp relations, however, since no one
	 * else could be accessing them.
	 */
	needLock = !RELATION_IS_LOCAL(rel);

	blkno = BTREE_METAPAGE + 1;
	for (;;)
	{
		/* Get the current relation length */
		if (needLock)
			LockRelationForExtension(rel, ExclusiveLock);
		num_pages = RelationGetNumberOfBlocks(rel);
		if (needLock)
			UnlockRelationForExtension(rel, ExclusiveLock);

		/* Allocate freePages after we read num_pages the first time */
		if (vstate.freePages == NULL)
		{
			/* No point in remembering more than MaxFSMPages pages */
			vstate.maxFreePages = MaxFSMPages;
			if ((BlockNumber) vstate.maxFreePages > num_pages)
				vstate.maxFreePages = (int) num_pages;
			vstate.freePages = (BlockNumber *)
				palloc(vstate.maxFreePages * sizeof(BlockNumber));
		}

		/* Quit if we've scanned the whole relation */
		if (blkno >= num_pages)
			break;
		/* Iterate over pages, then loop back to recheck length */
		for (; blkno < num_pages; blkno++)
		{
			btvacuumpage(&vstate, blkno, blkno);
		}
	}

	/*
	 * During VACUUM FULL, we truncate off any recyclable pages at the end of
	 * the index.  In a normal vacuum it'd be unsafe to do this except by
	 * acquiring exclusive lock on the index and then rechecking all the
	 * pages; doesn't seem worth it.
	 */
	if (info->vacuum_full && vstate.nFreePages > 0)
	{
		BlockNumber new_pages = num_pages;

		while (vstate.nFreePages > 0 &&
			   vstate.freePages[vstate.nFreePages - 1] == new_pages - 1)
		{
			new_pages--;
			stats->pages_deleted--;
			vstate.nFreePages--;
			vstate.totFreePages = vstate.nFreePages;	/* can't be more */
		}
		if (new_pages != num_pages)
		{
			/*
			 * Okay to truncate.
			 */
			RelationTruncate(rel, new_pages,
							 /* markPersistentAsPhysicallyTruncated */ true);

			/* update statistics */
			stats->pages_removed += num_pages - new_pages;

			num_pages = new_pages;
		}
	}

	/*
	 * Update the shared Free Space Map with the info we now have about free
	 * pages in the index, discarding any old info the map may have. We do not
	 * need to sort the page numbers; they're in order already.
	 */
	RecordIndexFreeSpace(&rel->rd_node, vstate.totFreePages,
						 vstate.nFreePages, vstate.freePages);

	pfree(vstate.freePages);

	MemoryContextDelete(vstate.pagedelcontext);

	/* update statistics */
	stats->num_pages = num_pages;
	stats->pages_free = vstate.totFreePages;

	MIRROREDLOCK_BUFMGR_VERIFY_NO_LOCK_LEAK_EXIT;

}
Beispiel #2
0
/*
 * btvacuumscan --- scan the index for VACUUMing purposes
 *
 * This combines the functions of looking for leaf tuples that are deletable
 * according to the vacuum callback, looking for empty pages that can be
 * deleted, and looking for old deleted pages that can be recycled.  Both
 * btbulkdelete and btvacuumcleanup invoke this (the latter only if no
 * btbulkdelete call occurred).
 *
 * The caller is responsible for initially allocating/zeroing a stats struct
 * and for obtaining a vacuum cycle ID if necessary.
 */
static void
btvacuumscan(IndexVacuumInfo *info, IndexBulkDeleteResult *stats,
			 IndexBulkDeleteCallback callback, void *callback_state,
			 BTCycleId cycleid)
{
	Relation	rel = info->index;
	BTVacState	vstate;
	BlockNumber num_pages;
	BlockNumber blkno;
	bool		needLock;

	/*
	 * Reset counts that will be incremented during the scan; needed in case
	 * of multiple scans during a single VACUUM command
	 */
	stats->estimated_count = false;
	stats->num_index_tuples = 0;
	stats->pages_deleted = 0;

	/* Set up info to pass down to btvacuumpage */
	vstate.info = info;
	vstate.stats = stats;
	vstate.callback = callback;
	vstate.callback_state = callback_state;
	vstate.cycleid = cycleid;
	vstate.lastBlockVacuumed = BTREE_METAPAGE;	/* Initialise at first block */
	vstate.lastBlockLocked = BTREE_METAPAGE;
	vstate.totFreePages = 0;

	/* Create a temporary memory context to run _bt_pagedel in */
	vstate.pagedelcontext = AllocSetContextCreate(CurrentMemoryContext,
												  "_bt_pagedel",
												  ALLOCSET_DEFAULT_SIZES);

	/*
	 * The outer loop iterates over all index pages except the metapage, in
	 * physical order (we hope the kernel will cooperate in providing
	 * read-ahead for speed).  It is critical that we visit all leaf pages,
	 * including ones added after we start the scan, else we might fail to
	 * delete some deletable tuples.  Hence, we must repeatedly check the
	 * relation length.  We must acquire the relation-extension lock while
	 * doing so to avoid a race condition: if someone else is extending the
	 * relation, there is a window where bufmgr/smgr have created a new
	 * all-zero page but it hasn't yet been write-locked by _bt_getbuf(). If
	 * we manage to scan such a page here, we'll improperly assume it can be
	 * recycled.  Taking the lock synchronizes things enough to prevent a
	 * problem: either num_pages won't include the new page, or _bt_getbuf
	 * already has write lock on the buffer and it will be fully initialized
	 * before we can examine it.  (See also vacuumlazy.c, which has the same
	 * issue.)	Also, we need not worry if a page is added immediately after
	 * we look; the page splitting code already has write-lock on the left
	 * page before it adds a right page, so we must already have processed any
	 * tuples due to be moved into such a page.
	 *
	 * We can skip locking for new or temp relations, however, since no one
	 * else could be accessing them.
	 */
	needLock = !RELATION_IS_LOCAL(rel);

	blkno = BTREE_METAPAGE + 1;
	for (;;)
	{
		/* Get the current relation length */
		if (needLock)
			LockRelationForExtension(rel, ExclusiveLock);
		num_pages = RelationGetNumberOfBlocks(rel);
		if (needLock)
			UnlockRelationForExtension(rel, ExclusiveLock);

		/* Quit if we've scanned the whole relation */
		if (blkno >= num_pages)
			break;
		/* Iterate over pages, then loop back to recheck length */
		for (; blkno < num_pages; blkno++)
		{
			btvacuumpage(&vstate, blkno, blkno);
		}
	}

	/*
	 * Check to see if we need to issue one final WAL record for this index,
	 * which may be needed for correctness on a hot standby node when non-MVCC
	 * index scans could take place.
	 *
	 * If the WAL is replayed in hot standby, the replay process needs to get
	 * cleanup locks on all index leaf pages, just as we've been doing here.
	 * However, we won't issue any WAL records about pages that have no items
	 * to be deleted.  For pages between pages we've vacuumed, the replay code
	 * will take locks under the direction of the lastBlockVacuumed fields in
	 * the XLOG_BTREE_VACUUM WAL records.  To cover pages after the last one
	 * we vacuum, we need to issue a dummy XLOG_BTREE_VACUUM WAL record
	 * against the last leaf page in the index, if that one wasn't vacuumed.
	 */
	if (XLogStandbyInfoActive() &&
		vstate.lastBlockVacuumed < vstate.lastBlockLocked)
	{
		Buffer		buf;

		/*
		 * The page should be valid, but we can't use _bt_getbuf() because we
		 * want to use a nondefault buffer access strategy.  Since we aren't
		 * going to delete any items, getting cleanup lock again is probably
		 * overkill, but for consistency do that anyway.
		 */
		buf = ReadBufferExtended(rel, MAIN_FORKNUM, vstate.lastBlockLocked,
								 RBM_NORMAL, info->strategy);
		LockBufferForCleanup(buf);
		_bt_checkpage(rel, buf);
		_bt_delitems_vacuum(rel, buf, NULL, 0, vstate.lastBlockVacuumed);
		_bt_relbuf(rel, buf);
	}

	MemoryContextDelete(vstate.pagedelcontext);

	/* update statistics */
	stats->num_pages = num_pages;
	stats->pages_free = vstate.totFreePages;
}
Beispiel #3
0
/*
 * btvacuumscan --- scan the index for VACUUMing purposes
 *
 * This combines the functions of looking for leaf tuples that are deletable
 * according to the vacuum callback, looking for empty pages that can be
 * deleted, and looking for old deleted pages that can be recycled.  Both
 * btbulkdelete and btvacuumcleanup invoke this (the latter only if no
 * btbulkdelete call occurred).
 *
 * The caller is responsible for initially allocating/zeroing a stats struct
 * and for obtaining a vacuum cycle ID if necessary.
 */
static void
btvacuumscan(IndexVacuumInfo *info, IndexBulkDeleteResult *stats,
			 IndexBulkDeleteCallback callback, void *callback_state,
			 BTCycleId cycleid)
{
	Relation	rel = info->index;
	BTVacState	vstate;
	BlockNumber num_pages;
	BlockNumber blkno;
	bool		needLock;

	/*
	 * Reset counts that will be incremented during the scan; needed in case
	 * of multiple scans during a single VACUUM command
	 */
	stats->estimated_count = false;
	stats->num_index_tuples = 0;
	stats->pages_deleted = 0;

	/* Set up info to pass down to btvacuumpage */
	vstate.info = info;
	vstate.stats = stats;
	vstate.callback = callback;
	vstate.callback_state = callback_state;
	vstate.cycleid = cycleid;
	vstate.lastBlockVacuumed = BTREE_METAPAGE;	/* Initialise at first block */
	vstate.lastUsedPage = BTREE_METAPAGE;
	vstate.totFreePages = 0;

	/* Create a temporary memory context to run _bt_pagedel in */
	vstate.pagedelcontext = AllocSetContextCreate(CurrentMemoryContext,
												  "_bt_pagedel",
												  ALLOCSET_DEFAULT_MINSIZE,
												  ALLOCSET_DEFAULT_INITSIZE,
												  ALLOCSET_DEFAULT_MAXSIZE);

	/*
	 * The outer loop iterates over all index pages except the metapage, in
	 * physical order (we hope the kernel will cooperate in providing
	 * read-ahead for speed).  It is critical that we visit all leaf pages,
	 * including ones added after we start the scan, else we might fail to
	 * delete some deletable tuples.  Hence, we must repeatedly check the
	 * relation length.  We must acquire the relation-extension lock while
	 * doing so to avoid a race condition: if someone else is extending the
	 * relation, there is a window where bufmgr/smgr have created a new
	 * all-zero page but it hasn't yet been write-locked by _bt_getbuf(). If
	 * we manage to scan such a page here, we'll improperly assume it can be
	 * recycled.  Taking the lock synchronizes things enough to prevent a
	 * problem: either num_pages won't include the new page, or _bt_getbuf
	 * already has write lock on the buffer and it will be fully initialized
	 * before we can examine it.  (See also vacuumlazy.c, which has the same
	 * issue.)	Also, we need not worry if a page is added immediately after
	 * we look; the page splitting code already has write-lock on the left
	 * page before it adds a right page, so we must already have processed any
	 * tuples due to be moved into such a page.
	 *
	 * We can skip locking for new or temp relations, however, since no one
	 * else could be accessing them.
	 */
	needLock = !RELATION_IS_LOCAL(rel);

	blkno = BTREE_METAPAGE + 1;
	for (;;)
	{
		/* Get the current relation length */
		if (needLock)
			LockRelationForExtension(rel, ExclusiveLock);
		num_pages = RelationGetNumberOfBlocks(rel);
		if (needLock)
			UnlockRelationForExtension(rel, ExclusiveLock);

		/* Quit if we've scanned the whole relation */
		if (blkno >= num_pages)
			break;
		/* Iterate over pages, then loop back to recheck length */
		for (; blkno < num_pages; blkno++)
		{
			btvacuumpage(&vstate, blkno, blkno);
		}
	}

	/*
	 * InHotStandby we need to scan right up to the end of the index for
	 * correct locking, so we may need to write a WAL record for the final
	 * block in the index if it was not vacuumed. It's possible that VACUUMing
	 * has actually removed zeroed pages at the end of the index so we need to
	 * take care to issue the record for last actual block and not for the
	 * last block that was scanned. Ignore empty indexes.
	 */
	if (XLogStandbyInfoActive() &&
		num_pages > 1 && vstate.lastBlockVacuumed < (num_pages - 1))
	{
		Buffer		buf;

		/*
		 * We can't use _bt_getbuf() here because it always applies
		 * _bt_checkpage(), which will barf on an all-zero page. We want to
		 * recycle all-zero pages, not fail.  Also, we want to use a
		 * nondefault buffer access strategy.
		 */
		buf = ReadBufferExtended(rel, MAIN_FORKNUM, num_pages - 1, RBM_NORMAL,
								 info->strategy);
		LockBufferForCleanup(buf);
		_bt_delitems_vacuum(rel, buf, NULL, 0, vstate.lastBlockVacuumed);
		_bt_relbuf(rel, buf);
	}

	MemoryContextDelete(vstate.pagedelcontext);

	/* update statistics */
	stats->num_pages = num_pages;
	stats->pages_free = vstate.totFreePages;
}