void io_initialize (int standalone)
{
if (disksim->iosim_info == NULL) {
iosim_initialize_iosim_info ();
}
bus_set_depths();
// fprintf (outputfile, "Back from bus_set_depths\n");
StaticAssert (sizeof(ioreq_event) <= DISKSIM_EVENT_SIZE);
device_initialize();
bus_initialize();
controller_initialize();
iodriver_initialize(standalone);
}
int main(void)
{
uint8_t msglen = 0;
uint8_t msg[BUS_MAXRECVMSGLEN];
uint16_t sender = 0;
uint16_t module_id = 0;
io_initialize();
clk_initialize();
scomm_initialize_uart1(&g_serial_phy);
//register_set_u16(MOD_eReg_ModuleID, 0x0003);
register_get(MOD_eReg_ModuleID, 0, &module_id);
bus_configure(&g_bus, module_id);
bus_initialize(&g_bus, 0);// initialize bus on UART 0
sei();
LED_STATUS_OFF;
LED_ERROR_OFF;
clk_timer_start(&g_LED_timer, CLOCK_MS_2_TICKS(1000));
while (1) {
// check for message and read it
if (bus_get_message(&g_bus)) {
bgw_forward_bus_msg(&g_bus, &g_serial_phy);
if (bus_read_message(&g_bus, &sender, &msglen, msg)) {
interpret_message(sender, msglen, msg);
}
}
bgw_forward_serial_msg(&g_bus, &g_serial_phy);
if (clk_timer_is_elapsed(&g_LED_timer)) {
// cyclic reset of error LED
LED_ERROR_OFF;
LED_STATUS_TOGGLE;
clk_timer_start(&g_LED_timer, CLOCK_MS_2_TICKS(1000));
}
}
return 0;
}
int main (void)
{
uint8_t msglen = 0;
uint8_t msg[BUS_MAXRECVMSGLEN];
uint16_t module_id = BUS_UNKNOWNADR, sender = 0, val;
uint16_t new_temp;
DDRC |= ((1<<PC3) | (1<<PC4));
PORTC &= ~((1<<PC3) | (1<<PC4));
clk_initialize();
//register_set_u16(MOD_eReg_ModuleID, 0x000E);
// configure a bus node with address X
register_get(MOD_eReg_ModuleID, 0, &module_id);
bus_configure(&g_bus, module_id);
bus_initialize(&g_bus, 0);// initialize bus on UART 0
spi_master_init_blk();
zagw_initialize();
sei();
register_get(APP_eReg_DesiredTempDay1, 0, &g_target_temp);
gdisp_initialize();
gdisp_goto_col_line(0,0);
gdisp_put_text("aktuell");
gdisp_goto_col_line(61,0);
gdisp_put_text("Soll");
draw_temperatures();
draw_window_closed();
gdisp_choose_font(gdisp_font1_x8);
gdisp_goto_col_line(0,3);
gdisp_put_text("Addr: ");
draw_hex16_value(g_bus.sCfg.uOwnNodeAddress);
clk_timer_start(&g_app_timer, 100);
while (1) {
if (bus_get_message(&g_bus)) {
if (bus_read_message(&g_bus, &sender, &msglen, msg)) {
interpret_message(&g_bus, msg, msglen, sender);
}
}
if (clk_timer_is_elapsed(&g_app_timer)) {
clk_timer_start(&g_app_timer,10);
gdisp_choose_font(gdisp_font1_x8);
gdisp_goto_col_line(0,3);
gdisp_put_text("Temp: ");
if (zagw_receive()) {
val = zagw_get_bits();
draw_hex16_value(val);
new_temp = zagw_get_temperature();
if (new_temp != g_current_temp) {
send_temperature(new_temp);
}
g_current_temp = new_temp;
draw_temperatures();
} else {
gdisp_put_text("PERR");
}
}
}
return 0;
}
