void *helper(void *d)
{
int i, ret;
struct timespec twait;
struct sched_param param;
cpu_set_t mask;
pid_t my_pid = gettid();
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
param.sched_priority = 93;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
if (pi_cv_enabled) {
ftrace_write(marker_fd, "Adding helper() thread: pid %d prio 93\n", my_pid);
pthread_cond_helpers_add(&count_threshold_cv, my_pid);
ftrace_write(marker_fd, "helper(): helps on cv %p\n", &count_threshold_cv);
}
sleep(1);
ftrace_write(marker_fd, "Starting helper(): pid %d prio 93\n", my_pid);
pthread_mutex_lock(&count_mutex);
/* Do some work (e.g., fill up the queue) */
twait = usec_to_timespec(3000000L);
busywait(&twait);
/* Then block on an rt_mutex */
ftrace_write(marker_fd, "helper() blocks on rt_mutex %p\n", &rt_mutex);
pthread_mutex_lock(&rt_mutex);
twait = usec_to_timespec(3000000L);
busywait(&twait);
pthread_mutex_unlock(&rt_mutex);
ftrace_write(marker_fd, "helper() signals on cv %p\n", &count_threshold_cv);
pthread_cond_broadcast(&count_threshold_cv);
ftrace_write(marker_fd, "helper(): just sent signal.\n");
ftrace_write(marker_fd, "helper(): pid %d, unlocking mutex\n", my_pid);
pthread_mutex_unlock(&count_mutex);
if (pi_cv_enabled) {
pthread_cond_helpers_del(&count_threshold_cv, my_pid);
ftrace_write(marker_fd, "helper(): stop helping on cv %p\n", &count_threshold_cv);
ftrace_write(marker_fd, "Removing helper() thread: pid %d prio 93\n", my_pid);
}
pthread_exit(NULL);
}
static char read_code(void) {
unsigned char scancode = 0;
int i;
for(i = 0; i <= 8; i++) {
busywait();
scancode |= ((DATA >> 5) & 0x01 ) << i;
}
busywait();
return scancode;
}
void *waiter(void *d)
{
int ret;
struct timespec twait;
struct sched_param param;
cpu_set_t mask;
pid_t my_pid = gettid();
sleep(1);
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
param.sched_priority = 95;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
ftrace_write(marker_fd, "Starting waiter(): pid %d prio 95\n", my_pid);
twait = usec_to_timespec(500000L);
busywait(&twait);
/*
Lock mutex and wait for signal. Note that the pthread_cond_wait routine
will automatically and atomically unlock mutex while it waits.
*/
pthread_mutex_lock(&count_mutex);
ftrace_write(marker_fd, "waiter(): pid %d. Going into wait...\n", my_pid);
ftrace_write(marker_fd, "waiter(): waits on cv %p\n", &count_threshold_cv);
pthread_cond_wait(&count_threshold_cv, &count_mutex);
ftrace_write(marker_fd, "waiter(): wakes on cv %p\n", &count_threshold_cv);
/* "Consume" the item... */
ftrace_write(marker_fd, "waiter(): pid %d Condition signal received.\n", my_pid);
ftrace_write(marker_fd, "waiter(): pid %d Consuming an item...\n", my_pid);
twait = usec_to_timespec(2000000L);
busywait(&twait);
ftrace_write(marker_fd, "waiter(): pid %ld Unlocking mutex.\n", my_pid);
pthread_mutex_unlock(&count_mutex);
pthread_exit(NULL);
}
void *watch_count(void *t)
{
int ret;
long my_id = (long)t;
struct timespec twait;
struct sched_param param;
cpu_set_t mask;
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
param.sched_priority = 95;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
printf("Starting watch_count(): thread %ld prio 95\n", my_id);
twait = usec_to_timespec(500000L);
busywait(&twait);
/*
Lock mutex and wait for signal. Note that the pthread_cond_wait routine
will automatically and atomically unlock mutex while it waits.
*/
pthread_mutex_lock(&count_mutex);
printf("watch_count(): thread %ld Count= %d. Going into wait...\n", my_id,count);
pthread_cond_wait(&count_threshold_cv, &count_mutex);
/* "Consume" the item... */
printf("watch_count(): thread %ld Condition signal received. Count= %d\n", my_id,count);
printf("watch_count(): thread %ld Consuming an item...\n", my_id,count);
twait = usec_to_timespec(2000000L);
busywait(&twait);
count -= 1;
printf("watch_count(): thread %ld count now = %d.\n", my_id, count);
printf("watch_count(): thread %ld Unlocking mutex.\n", my_id);
pthread_mutex_unlock(&count_mutex);
pthread_exit(NULL);
}
void *annoyer(void *t)
{
int ret;
long my_id = (long)t;
struct timespec twait;
struct sched_param param;
cpu_set_t mask;
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
param.sched_priority = 94;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
printf("Starting annoyer(): thread %ld prio 94\n", my_id);
printf("annoyer thread should preempt inc_count for 5sec\n");
twait = usec_to_timespec(5000000L);
busywait(&twait);
printf("annoyer thread dies... inc_count can resume\n");
pthread_exit(NULL);
}
void *annoyer(void *d)
{
int ret;
struct timespec twait;
struct sched_param param;
cpu_set_t mask;
pid_t my_pid = gettid();
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
param.sched_priority = 94;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
ftrace_write(marker_fd, "Starting annoyer(): pid %d prio 94\n", my_pid);
ftrace_write(marker_fd, "annoyer(): should preempt inc_count for 5sec\n");
twait = usec_to_timespec(5000000L);
ftrace_write(marker_fd, "annoyer(): starts running...\n");
busywait(&twait);
ftrace_write(marker_fd, "annoyer(): dies...\n");
pthread_exit(NULL);
}
void *annoyer(void *d)
{
int ret;
long id = (long) d;
struct timespec twait, now;
struct sched_param param;
cpu_set_t mask;
pid_t my_pid = gettid();
pids[id] = my_pid;
if (global_args.affinity) {
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
}
param.sched_priority = 93;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
/**
* Give other some time to warm up.
*/
sleep(2);
if (global_args.ftrace)
ftrace_write(marker_fd, "Starting annoyer(): prio 93\n");
while(1) {
/* 300ms */
twait = usec_to_timespec(300000L);
if (global_args.ftrace)
ftrace_write(marker_fd,
"[annoyer %d] starts running...\n",
my_pid);
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &now);
twait = timespec_add(&now, &twait);
busywait(&twait);
if (global_args.ftrace)
ftrace_write(marker_fd,
"[annoyer %d] sleeps.\n",
my_pid);
sleep(1);
}
pthread_exit(NULL);
}
void
systick_isr(void)
{
for (;;) {
flash_led(0x01);
flash_led(0x02);
busywait(800);
}
}
/* Hauptroutine wird von u-boot gerufen */
int main()
{
leds_init();
/* Endlosschleife */
while (1)
{
yellow_led(1);
serial_write("Hallo Welt\r\n");
yellow_led(0);
busywait();
}
}
void *inc_count(void *t)
{
int i, ret;
long my_id = (long)t;
struct timespec twait;
struct sched_param param;
cpu_set_t mask;
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
param.sched_priority = 93;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
printf("Starting inc_count(): thread %ld prio 93\n", my_id);
pthread_mutex_lock(&count_mutex);
/* Do some work (e.g., fill up the queue) */
twait = usec_to_timespec(6000000L);
busywait(&twait);
count++;
printf("inc_count(): thread %ld, count = %d\n",
my_id, count);
pthread_cond_signal(&count_threshold_cv);
printf("Just sent signal.\n");
printf("inc_count(): thread %ld, count = %d, unlocking mutex\n",
my_id, count);
pthread_mutex_unlock(&count_mutex);
pthread_exit(NULL);
}
/**
* Asynchronous communication test between two ranks (Ranks 0 and 1).
* In principle, Rank 0 simultaneously (a) sends a message to rank 1,
* and (b) "busy waits" for a specified amount of time (in seconds).
*/
double
async_comm_test (const double t_delay, const int rank, int* msgbuf, const int len)
{
const int MSG_TAG = 1000; /* Arbitrary message tag number */
double t_start = MPI_Wtime ();
if (rank == 0) {
/* MPI_Request req;
MPI_Status stat;
MPI_Isend (msgbuf, len, MPI_INT, 1, MSG_TAG, MPI_COMM_WORLD, &req);
busywait (t_delay);
MPI_Wait (&req, &stat);*/
/* Converting to blocking version of MPI send */
#pragma omp task default(none) shared(msgbuf, ompi_mpi_comm_world, ompi_mpi_int)
MPI_Send (msgbuf, len, MPI_INT, 1, MSG_TAG, MPI_COMM_WORLD);
busywait (t_delay);
#pragma omp taskwait
} else { /* rank == 1 */
MPI_Status stat;
MPI_Recv (msgbuf, len, MPI_INT, 0, MSG_TAG, MPI_COMM_WORLD, &stat);
}
return MPI_Wtime () - t_start;
}
/*
* qio()
* Queue an operation for the BG thread
*/
static void
qio(struct buf *b, uint op)
{
struct qio *q;
uint next;
/*
* This buffer is busy until op complete
*/
ASSERT_DEBUG(!BUSY(b), "qio: busy");
b->b_flags |= B_BUSY;
/*
* Get next ring element
*/
next = qnext;
q = &qios[next];
if (++next >= NQIO) {
next = 0;
}
qnext = next;
/*
* Wait for it to be ready
*/
busywait(&q->q_op);
/*
* Fill it in
*/
q->q_buf = b;
q->q_op = op;
/*
* Release BG to do its thing
*/
mutex_thread(bg_pid);
}
void *rt_owner(void *d)
{
int i, ret;
struct timespec twait;
struct sched_param param;
cpu_set_t mask;
pid_t my_pid = gettid();
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
param.sched_priority = 92;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
ftrace_write(marker_fd, "Starting rt_owner(): pid %d prio 92\n", my_pid);
pthread_mutex_lock(&rt_mutex);
/* Do some work (e.g., fill up the queue) */
twait = usec_to_timespec(6000000L);
busywait(&twait);
ftrace_write(marker_fd, "rt_owner(): pid %d, unlocking mutex\n", my_pid);
pthread_mutex_unlock(&rt_mutex);
pthread_exit(NULL);
}
bool otherVsShortAndOverdue() {
pid_t pid;
struct sched_param_ex sp;
int status;
pid = fork();
if(pid != 0) {
// Parent: makes child a SHORT
sp.sched_priority = 0;
sp.requested_time = 100;
sp.num_cooloff = 1;
sched_setscheduler(pid, SCHED_SHORT, (struct sched_param *)&sp);
printf("2\n");
busywait(20); // father runs for at least 10ms, should be enough time for son to wake up and take his place
printf("4\n");
busywait(300); // this is probably large enough for father to change to expired but he still needs to run since son is overdue
printf("5\n");
usleep(120000); //father sleeps for more than 100ms so son should become SHORT again by the time father wakes up
printf("8\n"); //son has become overdue again, we switched to father
usleep(110000); //father sleeps for 110ms
printf("10\n"); //son is overdue because he has no cooloffs so father should run
}
else {
// Child, a SHORT.
while(sched_getscheduler(getpid()) != SCHED_SHORT) {}
printf("1\n"); //son is SHORT and should run first, before OTHER father
usleep(10000); //puts child to sleep for 10ms, should be enough time to context_switch to father
printf("3\n");
busywait(110); // son runs for at least 100ms, should be enough time for son to become overdue and father needs to take his place
printf("6\n");
busywait(120);
printf("7\n"); //son is now regular SHORT again , we should not context switch back to father
busywait(120); //son becomes overdue here
printf("9\n"); //father sleeps so son should run next
busywait(110); //son doesn't become SHORT during this since we had only 1 cooloff, and father wakes up here
printf("11\n");
exit(0);
}
waitpid(pid, &status, 0);
return true;
}
void *t_1(void *thread_params) {
struct sched_param2 dl_params;
struct timespec t_next, t_period, t_start, t_stop, ran_for,
t_now, t_crit, t_exec;
long tid = gettid();
int retval, i;
cpu_set_t mask;
__u64 crit, run1, runtime, deadline, period;
/*
* t_1 should go in budget overflow while in critical section
*/
run1 = 8U * NSEC_PER_MSEC;
crit = 12U * NSEC_PER_MSEC;
runtime = run1 + crit + (8U * NSEC_PER_MSEC);
deadline = 40U * NSEC_PER_MSEC;
period = deadline;
t_period = nsec_to_timespec(&period);
t_crit = nsec_to_timespec(&crit);
signal(SIGHUP, sighandler);
signal(SIGINT, sighandler);
signal(SIGQUIT, sighandler);
CPU_ZERO(&mask);
CPU_SET(0, &mask);
retval = sched_setaffinity(0, sizeof(mask), &mask);
if (retval) {
fprintf(stderr, "WARNING: could not set task affinity\n");
exit(-1);
}
memset(&dl_params, 0, sizeof(dl_params));
dl_params.sched_priority = 0;
dl_params.sched_runtime = runtime;
dl_params.sched_deadline = deadline;
dl_params.sched_period = period;
ftrace_write(marker_fd, "[thread %ld (t_1)]: setting rt=%llums dl=%llums\n", tid,
runtime/NSEC_PER_MSEC,
deadline/NSEC_PER_MSEC);
retval = sched_setscheduler2(0, SCHED_DEADLINE, &dl_params);
if (retval) {
fprintf(stderr, "WARNING: could not set SCHED_DEADLINE"
" policy!\n");
exit(-1);
}
clock_gettime(CLOCK_MONOTONIC, &t_next);
for (i = 0; i < NRUN; i++) {
ftrace_write(marker_fd, "[t_1] run starts\n");
clock_gettime(CLOCK_MONOTONIC, &t_start);
ftrace_write(marker_fd, "[t_1] exec for %lluns\n", run1);
busywait(run1);
ftrace_write(marker_fd, "[t_1] locks mutex\n");
pthread_mutex_lock(&my_mutex);
ftrace_write(marker_fd, "[t_1] exec for %lluns\n", crit);
busywait(crit);
ftrace_write(marker_fd, "[t_1] unlocks mutex\n");
pthread_mutex_unlock(&my_mutex);
clock_gettime(CLOCK_MONOTONIC, &t_stop);
t_next = timespec_add(&t_next, &t_period);
ran_for = timespec_sub(&t_stop, &t_start);
printf("[thread %ld]: run %d for %lluus\n",
tid,
i,
timespec_to_usec(&ran_for));
ftrace_write(marker_fd, "[t_1] run ends\n");
clock_nanosleep(CLOCK_MONOTONIC, TIMER_ABSTIME, &t_next, NULL);
}
retval = sched_setscheduler2(0, SCHED_OTHER, &dl_params);
if (retval) {
fprintf(stderr, "WARNING: could not set SCHED_OTHER"
"policy!\n");
exit(-1);
}
}
void *producer(void *d)
{
int ret;
struct sched_param param;
long id = (long) d;
long wait;
int item = id;
buffer_t *b = &buffer;
struct timespec twait, now;
cpu_set_t mask;
pid_t my_pid = gettid();
pids[id] = my_pid;
if (global_args.affinity) {
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
}
param.sched_priority = 92;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
if (global_args.pi_cv_enabled) {
if (global_args.ftrace)
ftrace_write(marker_fd, "Adding helper thread: pid %d,"
" prio 92\n", my_pid);
pthread_cond_helpers_add(&buffer.more, my_pid);
if (global_args.ftrace)
ftrace_write(marker_fd, "[prod %d] helps on cv %p\n",
my_pid, &buffer.more);
}
while(!shutdown) {
pthread_mutex_lock(&b->mutex);
while (b->occupied >= BSIZE)
pthread_cond_wait(&b->less, &b->mutex);
assert(b->occupied < BSIZE);
b->buf[b->nextin++] = item;
wait = rand_wait() * 1000;
twait = usec_to_timespec(wait);
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &now);
twait = timespec_add(&now, &twait);
busywait(&twait);
if (global_args.ftrace)
ftrace_write(marker_fd, "[prod %d] executed for %d usec"
" and produced %d\n", my_pid, wait, item);
b->nextin %= BSIZE;
b->occupied++;
/*
* now: either b->occupied < BSIZE and b->nextin is the index
* of the next empty slot in the buffer, or
* b->occupied == BSIZE and b->nextin is the index of the
* next (occupied) slot that will be emptied by a consumer
* (such as b->nextin == b->nextout)
*/
pthread_cond_signal(&b->more);
pthread_mutex_unlock(&b->mutex);
sleep(1);
}
if (global_args.pi_cv_enabled) {
pthread_cond_helpers_del(&buffer.more, my_pid);
if (global_args.ftrace) {
ftrace_write(marker_fd, "[prod %d] stop helping"
" on cv %p\n", my_pid, &buffer.more);
ftrace_write(marker_fd, "Removing helper thread:"
" pid %d, prio 92\n", my_pid);
}
}
pthread_exit(NULL);
}
void *consumer(void *d)
{
int ret;
struct sched_param param;
long id = (long) d;
long wait;
int item;
buffer_t *b = &buffer;
struct timespec twait, now;
cpu_set_t mask;
pid_t my_pid = gettid();
pids[id] = my_pid;
if (global_args.affinity) {
CPU_ZERO(&mask);
CPU_SET(0, &mask);
ret = sched_setaffinity(0, sizeof(mask), &mask);
if (ret != 0) {
printf("pthread_setaffinity failed\n");
exit(EXIT_FAILURE);
}
}
param.sched_priority = 94;
ret = pthread_setschedparam(pthread_self(),
SCHED_FIFO,
¶m);
if (ret != 0) {
printf("pthread_setschedparam failed\n");
exit(EXIT_FAILURE);
}
/**
* Give producers some time to set up.
*/
sleep(1);
while(!shutdown) {
pthread_mutex_lock(&b->mutex);
while(b->occupied <= 0) {
if (global_args.ftrace)
ftrace_write(marker_fd, "[cons %d] waits\n",
my_pid);
pthread_cond_wait(&b->more, &b->mutex);
}
assert(b->occupied > 0);
item = b->buf[b->nextout++];
wait = rand_wait() * 1000;
twait = usec_to_timespec(wait);
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &now);
twait = timespec_add(&now, &twait);
busywait(&twait);
if (global_args.ftrace)
ftrace_write(marker_fd, "[cons %d] executed for %d usec"
" and consumed %d\n", my_pid, wait, item);
b->nextout %= BSIZE;
b->occupied--;
/*
* now: either b->occupied > 0 and b->nextout is the index
* of the next occupied slot in the buffer, or
* b->occupied == 0 and b->nextout is the index of the next
* (empty) slot that will be filled by a producer (such as
* b->nextout == b->nextin)
*/
pthread_cond_signal(&b->less);
pthread_mutex_unlock(&b->mutex);
}
pthread_exit(NULL);
}
void * busypthread(void *msec)
{
busywait(msec);
pthread_exit(NULL);
}
boolean uClock_EnableClock(uClockIdType eClockId)
{
boolean bRetVal = TRUE;
uint32 nTimeout = 150;
// if(uClockDriverCtxt.bInitialized == FALSE)
// {
// qurt_mutex_init(&uClockDriverCtxt.Mutex);
// uClockDriverCtxt.bInitialized = TRUE;
// }
if(eClockId < CLOCK_TOTAL_CLOCK_ENUMS)
{
// qurt_mutex_lock(&uClockDriverCtxt.Mutex);
if(uClockDriverCtxt.anClockReferences[eClockId] == 0)
{
switch(eClockId)
{
case CLOCK_GCC_BLSP1_QUP1_APPS_CLK:
HWIO_OUTF(GCC_BLSP1_QUP1_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP1_QUP2_APPS_CLK:
HWIO_OUTF(GCC_BLSP1_QUP2_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP1_QUP3_APPS_CLK:
HWIO_OUTF(GCC_BLSP1_QUP3_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP1_QUP4_APPS_CLK:
HWIO_OUTF(GCC_BLSP1_QUP4_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP1_QUP5_APPS_CLK:
HWIO_OUTF(GCC_BLSP1_QUP5_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP1_QUP6_APPS_CLK:
HWIO_OUTF(GCC_BLSP1_QUP6_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP2_QUP1_APPS_CLK:
HWIO_OUTF(GCC_BLSP2_QUP1_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP2_QUP2_APPS_CLK:
HWIO_OUTF(GCC_BLSP2_QUP2_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP2_QUP3_APPS_CLK:
HWIO_OUTF(GCC_BLSP2_QUP3_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP2_QUP4_APPS_CLK:
HWIO_OUTF(GCC_BLSP2_QUP4_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP2_QUP5_APPS_CLK:
HWIO_OUTF(GCC_BLSP2_QUP5_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP2_QUP6_APPS_CLK:
HWIO_OUTF(GCC_BLSP2_QUP6_I2C_APPS_CBCR, CLK_ENABLE, 0x1);
break;
case CLOCK_GCC_BLSP1_AHB_CLK:
HWIO_OUTF(GCC_SPARE_CLOCK_BRANCH_ENA_VOTE, BLSP1_AHB_CLK_ENA, 0x1);
break;
case CLOCK_GCC_BLSP2_AHB_CLK:
HWIO_OUTF(GCC_SPARE_CLOCK_BRANCH_ENA_VOTE, BLSP2_AHB_CLK_ENA, 0x1);
break;
default:
bRetVal = FALSE;
break;
}
while(uClock_IsOn(eClockId) != TRUE)
{
if(nTimeout == 0)
{
break;
}
busywait(2);
nTimeout--;
}
}
/*
* Increase the reference count on this clock.
*/
if(nTimeout != 0)
{
uClockDriverCtxt.anClockReferences[eClockId]++;
bRetVal = TRUE;
}
else
{
bRetVal = FALSE;
}
// qurt_mutex_unlock(&uClockDriverCtxt.Mutex);
return(bRetVal);
}
return(FALSE);
} /* uClock_EnableClock */
