ContainerWidget * MultiViewWidget::createContainer(QWidget *widget)
{
  ContainerWidget *container = new ContainerWidget;
  connect(container, SIGNAL(splitHorizontal()), SLOT(splitHorizontal()));
  connect(container, SIGNAL(splitVertical()), SLOT(splitVertical()));
  connect(container, SIGNAL(closeView()), SLOT(removeView()));

  if (widget) {
    container->setViewWidget(widget);
  }
  // If we have a factory, then create the options widget too!
  else if (m_factory) {
    QWidget *optionsWidget = new QWidget;
    QVBoxLayout *v = new QVBoxLayout;
    optionsWidget->setLayout(v);
    v->addStretch();
    foreach (const QString &name, m_factory->views()) {
      QPushButton *button = new QPushButton(name);
      button->setToolTip(tr("Create a new view"));
      connect(button, SIGNAL(clicked()), SLOT(createView()));
      QHBoxLayout *h = new QHBoxLayout;
      h->addStretch();
      h->addWidget(button);
      h->addStretch();
      v->addLayout(h);
    }
    v->addStretch();
    container->layout()->addWidget(optionsWidget);
  }

  return container;
}
Beispiel #2
0
bool MonthView::eventFilter(QObject *o, QEvent *e)
{
    if ( e->type() == QEvent::KeyPress) {
        QKeyEvent* ke = static_cast<QKeyEvent*>(e);
        if (ke->key() == Qt::Key_Back) {
            emit closeView();
            ke->accept();
            return true;
        }
    }
    return QCalendarWidget::eventFilter(o, e);
}
Beispiel #3
0
void AppointmentPicker::initMonth()
{
    if ( !monthView ) {
        monthView = new MonthView(0, QCategoryFilter(), mSources);
        monthView->setHorizontalHeaderFormat(QCalendarWidget::SingleLetterDayNames);
        QSoftMenuBar::setLabel(monthView, Qt::Key_Back, QSoftMenuBar::Cancel);
        // TODO monthView->setMargin(0);
        views->addWidget( monthView );
        connect( monthView, SIGNAL(activated(QDate)),
             this, SLOT(viewDay(QDate)) );
        connect( monthView, SIGNAL(closeView()), this, SLOT(reject()));
    }
}
Beispiel #4
0
void AlarmView::snoozeClicked()
{
    mAlarmTimer.stop();

    /* Snooze for some amount of time (configured in settings, say) */
    int snoozeindex = mSnoozeChoices->currentIndex();

    int snoozedelay = 60;
    // Make sure we set alarms on the minute by rounding
    QDateTime now = QDateTime::currentDateTime();
    int seconds = now.time().second();
    if (seconds >= 30)
        now = now.addSecs(60 - seconds);
    else
        now = now.addSecs(-seconds);

    switch(snoozeindex) {
        case 0: // 5 minutes
            snoozedelay = 300;
            break;
        case 1: // 10 minutes
            snoozedelay = 600;
            break;
        case 2: // 15 minutes
            snoozedelay = 900;
            break;
        case 3: // 30 minutes
            snoozedelay = 1800;
            break;
        case 4: // 1 hour
            snoozedelay = 3600;
            break;
        case 5: // 1 day
            snoozedelay = 24 * 60;
            break;
        case 6: // 1 week
            snoozedelay = 7 * 24 * 60;
            break;
        case 7: // 1 month hmm
            {
                QDateTime then = now.addMonths(1);
                snoozedelay = now.secsTo(then);
            }
            break;
    }

    QDateTime snoozeTime = now.addSecs(snoozedelay);
    Qtopia::addAlarm(snoozeTime, "Calendar", "alarm(QDateTime,int)", snoozeTime.secsTo(mStartTime) / 60);

    emit closeView();
}
Beispiel #5
0
void AppointmentPicker::initDay()
{
    if ( !dayView ) {
        dayView = new DayView(0, QCategoryFilter(), mSources);
        views->addWidget( dayView );
        int endTime = qMin(qMax(datebook->startTime + 8, 17), 24);
        dayView->setDaySpan( datebook->startTime, endTime );
        QSoftMenuBar::setLabel(dayView, Qt::Key_Back, QSoftMenuBar::Back);
        connect( dayView, SIGNAL(showDetails()),
                this, SLOT(accept()) );
        connect( dayView, SIGNAL(closeView()),
                this, SLOT(viewMonthAgain()) );
    }
}
Beispiel #6
0
void AlarmView::keyPressEvent( QKeyEvent * ke)
{
    mAlarmTimer.stop();

    switch (ke->key()) {
        case Qt::Key_Select:
            if (mModel && mAlarmList->currentIndex().isValid())
                emit showAlarmDetails(selectedOccurrence());
            break;
        case Qt::Key_Back:
            emit closeView();
            break;
        default:
            QWidget::keyPressEvent(ke);
    }
}
Beispiel #7
0
TestNSPlugin::TestNSPlugin()
{
   m_loader = NSPluginLoader::instance();

   // client area
   m_client = new QWidget( this, "m_client" );
   setCentralWidget( m_client );
   m_client->show();
   m_layout = new QHBoxLayout( m_client );

   // file menu
   KStdAction::openNew( this, SLOT(newView()), actionCollection());
   KStdAction::close( this, SLOT(closeView()), actionCollection());
   KStdAction::quit( kapp, SLOT(quit()), actionCollection());

   createGUI( "testnspluginui.rc" );
}
Beispiel #8
0
void WatchVector::detachData()
{
    PixelBox *f = static_cast<PixelBox*>(sender());
    int idx     = getIndexFromPixelBox(f);

    if (idx != -1) {
        m_nActiveMappings--;
        m_pData[idx] = NULL;
        m_qName[idx] = QString("NULL");
        m_bNeedsUpdate = true;
        delMappingOptions(idx);
    }

    if (m_nActiveMappings == 0) {
        closeView();
    }
}
Beispiel #9
0
void TabbedWebView::setWebPage(WebPage* page)
{
    if (m_page == page) {
        return;
    }

    if (m_page) {
        delete m_page;
        m_page = 0;
    }

    m_page = page;
    m_page->setWebView(this);
    m_page->setParent(this);
    setPage(m_page);

    connect(m_page, SIGNAL(linkHovered(QString, QString, QString)), this, SLOT(linkHovered(QString, QString, QString)));
    connect(m_page, SIGNAL(windowCloseRequested()), this, SLOT(closeView()));
}
Beispiel #10
0
bool RearMirrorTools::mousePressEvent(int x, int y) {
    if (_windowed) {
        if (_closeIconRect.contains(x, y)) {
            _windowed = false;
            emit closeView();
            return true;
        }

        /* Disabled for now https://worklist.net/19548
        if (_resetIconRect.contains(x, y)) {
            emit resetView();
            return true;
        }
        */
        
        if (_headZoomIconRect.contains(x, y)) {
            _zoomLevel = HEAD;
            Application::getInstance()->bumpSettings();
            return true;
        }
        
        if (_bodyZoomIconRect.contains(x, y)) {
            _zoomLevel = BODY;
            Application::getInstance()->bumpSettings();
            return true;
        }

        if (_bounds.contains(x, y)) {
            _windowed = false;
            emit restoreView();
            return true;
        }
    }
    
    if (_fullScreen) {
        if (_shrinkIconRect.contains(x, y)) {
            _fullScreen = false;
            emit shrinkView();
            return true;
        }
    }
    return false;
}
Beispiel #11
0
/** Constructor */
ProfileView::ProfileView(QWidget *parent)
: QDialog(parent)
{
  /* Invoke the Qt Designer generated object setup routine */
  ui.setupUi(this);

  connect( ui.photoLabel, SIGNAL( customContextMenuRequested( QPoint ) ), this, SLOT( imageCustomPopupMenu( QPoint ) ) );
  connect( ui.profileTreeWidget, SIGNAL( customContextMenuRequested( QPoint ) ), this, SLOT( profileCustomPopupMenu( QPoint ) ) );
  connect( ui.fileTreeWidget, SIGNAL( customContextMenuRequested( QPoint ) ), this, SLOT( fileCustomPopupMenu( QPoint ) ) );
  //

  // connect up the buttons.
  connect(ui.closeButton, SIGNAL(clicked()), this, SLOT(closeView()));
  connect(ui.profileditButton, SIGNAL(clicked()), this, SLOT(profileEdit()));

  loadAvatar();

  /* Hide platform specific features */
#ifdef Q_WS_WIN

#endif
}
Beispiel #12
0
bool RearMirrorTools::mousePressEvent(int x, int y) {
    if (_windowed) {
        if (_closeIconRect.contains(x, y)) {
            _windowed = false;
            emit closeView();
            return true;
        }
        
        if (_resetIconRect.contains(x, y)) {
            emit resetView();
            return true;
        }
        
        if (_headZoomIconRect.contains(x, y)) {
            _zoomLevel = HEAD;
            return true;
        }
        
        if (_bodyZoomIconRect.contains(x, y)) {
            _zoomLevel = BODY;
            return true;
        }
        
        if (_bounds.contains(x, y)) {
            _windowed = false;
            emit restoreView();
            return true;
        }
    }
    
    if (_fullScreen) {
        if (_shrinkIconRect.contains(x, y)) {
            _fullScreen = false;
            emit shrinkView();
            return true;
        }
    }
    return false;
}
ContainerWidget::ContainerWidget(QWidget *p, Qt::WindowFlags f)
  : QWidget(p, f), m_viewWidget(NULL), m_label(new QLabel("   ", this)),
    m_active(false)
{
  QHBoxLayout *h = new QHBoxLayout;
  h->setContentsMargins(0, 0, 0, 0);
  QVBoxLayout *v = new QVBoxLayout;
  v->setContentsMargins(0, 0, 0, 0);
  v->setSpacing(0);

  h->addWidget(m_label);
  h->addStretch();
  QPushButton *button = new QPushButton(tr("Split Horizontal"), this);
  connect(button, SIGNAL(clicked()), SIGNAL(splitHorizontal()));
  h->addWidget(button);
  button = new QPushButton(tr("Split Vertical"), this);
  connect(button, SIGNAL(clicked()), SIGNAL(splitVertical()));
  h->addWidget(button);
  button = new QPushButton(tr("Close"), this);
  connect(button, SIGNAL(clicked()), SIGNAL(closeView()));
  h->addWidget(button);
  v->addLayout(h);
  setLayout(v);
}
Beispiel #14
0
void ContactDetails::init( const QContact &entry )
{
    // If we redisplay the same entry, don't shift our view around too much
    bool sameEntry = (entry.uid() == ent.uid());

    ent = entry;
    mLink.clear();


    // We create tabs for each addressbook detail view plugin
    // We ask them if they want to be shown for this contact (or they can
    // just hide themselves in the init function)
    // they need to provide certain actions
    // and signals
    // maybe a view factory plugin
    // returns view plugins for list, details?
    // maybe string, maybe enum


    /* Create our members, if we haven't */
    if ( !mModel ) {
        mModel = new QContactModel(this);
        connect(mModel, SIGNAL(modelReset()), this, SLOT(modelChanged()));

        mTabs = new QTabWidget();

        mQuickTab = new ContactOverview(0);
        mDetailsTab = new ContactBrowser(0);
#if defined(QTOPIA_TELEPHONY)
        mCallHistoryTab = new ContactCallHistoryList(0);
#endif
        mMessageHistoryTab = new ContactMessageHistoryList(0);

        mTabs->addTab(mQuickTab, QIcon(":icon/contactdetails"), tr("Overview"));
        mTabs->addTab(mDetailsTab, QIcon(":icon/details"), tr("Details"));
#if defined(QTOPIA_TELEPHONY)
        mTabs->addTab(mCallHistoryTab, QIcon(":icon/phone/calls"), tr("Calls"));
#endif
        mTabs->addTab(mMessageHistoryTab, QIcon(":icon/email"), tr("Messages"));

        connect(mQuickTab, SIGNAL(externalLinkActivated()), this, SIGNAL(externalLinkActivated()));
        connect(mQuickTab, SIGNAL(closeView()), this, SIGNAL(closeView()));
        connect(mDetailsTab, SIGNAL(externalLinkActivated()), this, SIGNAL(externalLinkActivated()));
        connect(mDetailsTab, SIGNAL(closeView()), this, SIGNAL(closeView()));
#if defined(QTOPIA_TELEPHONY)
        connect(mCallHistoryTab, SIGNAL(externalLinkActivated()), this, SIGNAL(externalLinkActivated()));
        connect(mCallHistoryTab, SIGNAL(closeView()), this, SIGNAL(closeView()));
#endif
        connect(mMessageHistoryTab, SIGNAL(externalLinkActivated()), this, SIGNAL(externalLinkActivated()));
        connect(mMessageHistoryTab, SIGNAL(closeView()), this, SIGNAL(closeView()));

        connect(mQuickTab, SIGNAL(callContact()), this, SIGNAL(callContact()));
        connect(mQuickTab, SIGNAL(textContact()), this, SIGNAL(textContact()));
        connect(mQuickTab, SIGNAL(emailContact()), this, SIGNAL(emailContact()));
        connect(mQuickTab, SIGNAL(editContact()), this, SIGNAL(editContact()));

        connect(mDetailsTab, SIGNAL(highlighted(QString)), this, SIGNAL(highlighted(QString)));

        QVBoxLayout *v = new QVBoxLayout();
        v->addWidget(mTabs);
        v->setMargin(0);
        setLayout(v);
    }

    modelChanged();

    if (!sameEntry)
        mTabs->setCurrentIndex(0);
    mTabs->currentWidget()->setFocus();
}
Beispiel #15
0
bool AlarmView::updateAlarms()
{
    bool playSound = false;
    QIcon aicon(":icon/audible");
    QIcon sicon(":icon/silent");

    mStandardModel->clear();
    mAlarmCount = 0;

    QString localDT;
    QString tzDT;

    // Filter out occurrences that do not have an alarm
    for (int i=0; i < mModel->rowCount(); i++) {
        QOccurrence o = mModel->occurrence(i);
        QAppointment a = o.appointment();
        if (a.hasAlarm() && (o.startInCurrentTZ() == mStartTime) && (o.alarmDelay() == mDelay)) {
            if (!playSound && (a.alarm() == QAppointment::Audible)) {
                playSound = true;
            }
            QStandardItem* item = new QStandardItem();
            if (a.alarm() == QAppointment::Audible)
                item->setData(aicon, Qt::DecorationRole);
            else
                item->setData(sicon, Qt::DecorationRole);

            if (!a.description().isEmpty())
                item->setData(a.description(), Qt::DisplayRole);
            else
                item->setData(tr("No description", "no description for appointment"), Qt::DisplayRole);

            QList< StringPair > subList;
            if (!a.location().isEmpty()) {
                subList.append(qMakePair(QString(), a.location()));
            }

            formatDateTime(o, true, localDT, tzDT);
            if (a.isAllDay()) {
                subList.append(qMakePair(tr("All day: "), localDT));
            } else {
                subList.append(qMakePair(tr("Starts: "), localDT));
                if (!tzDT.isEmpty())
                    subList.append(qMakePair(QString(""), tzDT));
                formatDateTime(o, false, localDT, tzDT);
                subList.append(qMakePair(tr("Ends: "), localDT));
                if (!tzDT.isEmpty())
                    subList.append(qMakePair(QString(""), tzDT));
            }
            item->setData(QVariant::fromValue(subList), TwoLevelDelegate::SubLabelsRole);

            item->setData(i, TwoLevelDelegate::TwoLevelDelegateUserRole);
            mStandardModel->appendRow(item);
        }
    }

    int rowCount = mStandardModel->rowCount();

    // Select the first item
    mAlarmList->setCurrentIndex(mStandardModel->index(0,0));

    // XXX i18n boneheadedness.
    if (rowCount < 2) {
        setWindowTitle(tr("Reminder"));
    } else {
        setWindowTitle(tr("Reminders"));
    }

    mSnoozeButton->setFocus();

    // If we actually got any matching alarms...
    if (rowCount > 0) {
        if (playSound) {
            Qtopia::soundAlarm();
            mAlarmTimer.start(5000,this);
        }

        return true;
    } else {
        emit closeView();
        return false;
    }
}
Beispiel #16
0
void AlarmView::snoozeClicked()
{
    mAlarmTimer.stop();

    /* Snooze for some amount of time (configured in settings, say) */
    int snoozeindex = mSnoozeChoices->currentIndex();

    int snoozedelay = 60;
    // Make sure we set alarms on the minute by rounding
    QDateTime now = QDateTime::currentDateTime();
    int seconds = now.time().second();
    if (seconds >= 30)
        now = now.addSecs(60 - seconds);
    else
        now = now.addSecs(-seconds);

    switch(snoozeindex) {
        case 0: // 5 minutes
            snoozedelay = 300;
            break;
        case 1: // 10 minutes
            snoozedelay = 600;
            break;
        case 2: // 15 minutes
            snoozedelay = 900;
            break;
        case 3: // 30 minutes
            snoozedelay = 1800;
            break;
        case 4: // 1 hour
            snoozedelay = 3600;
            break;
        case 5: // 1 day
            snoozedelay = 24 * 60;
            break;
        case 6: // 1 week
            snoozedelay = 7 * 24 * 60;
            break;
        case 7: // 1 month hmm
            {
                QDateTime then = now.addMonths(1);
                snoozedelay = now.secsTo(then);
            }
            break;
    }

    QDateTime snoozeTime = now.addSecs(snoozedelay);

    /* Now store the snoozed alarm settings .. */
    QSettings config("Trolltech","DateBook");
    config.beginGroup("ActiveAlarms");

    /* get a sequence number... if you snooze more than 4 billion times, you'll need a new alarm clock */
    int index = config.value("SequenceNumber", 123).toInt();
    config.setValue("SequenceNumber", index + 1);
    config.sync();

    config.beginGroup(QString("AlarmID-%1").arg(index));
    config.setValue("EventTime", mStartTime);
    config.setValue("AlarmDelta", mDelay);

    Qtopia::addAlarm(snoozeTime, "Calendar", "snooze(QDateTime,int)", index);

    emit closeView();
}
/*!
  Mimic the look of the text editor toolbar as defined in e.g. EditorView::EditorView
  */
EditorToolBar::EditorToolBar(QWidget *parent) :
        Utils::StyledBar(parent),
        m_editorList(new QComboBox(this)),
        m_closeButton(new QToolButton),
        m_lockButton(new QToolButton),

        m_goBackAction(new QAction(QIcon(QLatin1String(":/help/images/previous.png")), EditorManager::tr("Go Back"), parent)),
        m_goForwardAction(new QAction(QIcon(QLatin1String(":/help/images/next.png")), EditorManager::tr("Go Forward"), parent)),

        m_activeToolBar(0),
        m_toolBarPlaceholder(new QWidget),
        m_defaultToolBar(new QWidget(this)),
        m_isStandalone(false)
{
    QHBoxLayout *toolBarLayout = new QHBoxLayout(this);
    toolBarLayout->setMargin(0);
    toolBarLayout->setSpacing(0);
    toolBarLayout->addWidget(m_defaultToolBar);
    m_toolBarPlaceholder->setLayout(toolBarLayout);
    m_toolBarPlaceholder->setSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding);

    m_defaultToolBar->setSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding);
    m_activeToolBar = m_defaultToolBar;

    m_editorsListModel = EditorManager::instance()->openedEditorsModel();
    connect(m_goBackAction, SIGNAL(triggered()), this, SIGNAL(goBackClicked()));
    connect(m_goForwardAction, SIGNAL(triggered()), this, SIGNAL(goForwardClicked()));

    m_editorList->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    m_editorList->setMinimumContentsLength(20);
    m_editorList->setModel(m_editorsListModel);
    m_editorList->setMaxVisibleItems(40);
    m_editorList->setContextMenuPolicy(Qt::CustomContextMenu);

    m_lockButton->setAutoRaise(true);
    m_lockButton->setProperty("type", QLatin1String("dockbutton"));
    m_lockButton->setVisible(false);

    m_closeButton->setAutoRaise(true);
    m_closeButton->setIcon(QIcon(":/core/images/closebutton.png"));
    m_closeButton->setProperty("type", QLatin1String("dockbutton"));
    m_closeButton->setEnabled(false);

    m_toolBarPlaceholder->setSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding);

    m_backButton = new QToolButton(this);
    m_backButton->setDefaultAction(m_goBackAction);

    m_forwardButton= new QToolButton(this);
    m_forwardButton->setDefaultAction(m_goForwardAction);

    QHBoxLayout *toplayout = new QHBoxLayout(this);
    toplayout->setSpacing(0);
    toplayout->setMargin(0);
    toplayout->addWidget(m_backButton);
    toplayout->addWidget(m_forwardButton);
    toplayout->addWidget(m_editorList);
    toplayout->addWidget(m_toolBarPlaceholder, 1); // Custom toolbar stretches
    toplayout->addWidget(m_lockButton);
    toplayout->addWidget(m_closeButton);

    setLayout(toplayout);

    // this signal is disconnected for standalone toolbars and replaced with
    // a private slot connection
    connect(m_editorList, SIGNAL(activated(int)), this, SIGNAL(listSelectionActivated(int)));

    connect(m_editorList, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(listContextMenu(QPoint)));
    connect(m_lockButton, SIGNAL(clicked()), this, SLOT(makeEditorWritable()));
    connect(m_closeButton, SIGNAL(clicked()), this, SLOT(closeView()), Qt::QueuedConnection);

    ActionManager *am = ICore::instance()->actionManager();
    connect(am->command(Constants::CLOSE), SIGNAL(keySequenceChanged()),
            this, SLOT(updateActionShortcuts()));
    connect(am->command(Constants::GO_BACK), SIGNAL(keySequenceChanged()),
            this, SLOT(updateActionShortcuts()));
    connect(am->command(Constants::GO_FORWARD), SIGNAL(keySequenceChanged()),
            this, SLOT(updateActionShortcuts()));

}
Beispiel #18
0
void WebWidget::closeEvent(QCloseEvent* event)
{
    emit closeView(false);
    event->accept();
}
WatchGeoDataTree::WatchGeoDataTree(int inPrimitiveType, int outPrimitiveType,
		VertexBox *primitiveMap, VertexBox *vertexCount, QWidget *parent) :
		WatchView(parent)
{
	/* Setup GUI */
	setupUi(this);

	fMapping->setVisible(false);

	m_dataModel = new GeoShaderDataModel(inPrimitiveType, outPrimitiveType,
			primitiveMap, vertexCount, NULL, NULL, this);
	m_filterProxy = new GeoShaderDataSortFilterProxyModel(this);
	m_filterProxy->setSourceModel(m_dataModel);
	m_filterProxy->setDynamicSortFilter(true);
	connect(tbHideInactive, SIGNAL(toggled(bool)), m_filterProxy,
			SLOT(setHideInactive(bool)));
	connect(tbHideEmpty, SIGNAL(toggled(bool)), m_filterProxy,
			SLOT(setHideEmpty(bool)));
	tvGeoData->setModel(m_filterProxy);
	tvGeoData->setAllColumnsShowFocus(true);
	tvGeoData->setUniformRowHeights(true);

	connect(tvGeoData, SIGNAL(doubleClicked(const QModelIndex &)), this,
			SLOT(newSelection(const QModelIndex &)));

	connect(m_dataModel, SIGNAL(dataDeleted(int)), this, SLOT(detachData(int)));
	connect(m_dataModel, SIGNAL(empty()), this, SLOT(closeView()));

	twGeoInfo->item(0, 0)->setText(QString(lookupEnum(inPrimitiveType)));
	twGeoInfo->item(1, 0)->setText(
			QString::number(m_dataModel->getNumInPrimitives()));
	twGeoInfo->item(0, 2)->setText(QString(lookupEnum(outPrimitiveType)));
	twGeoInfo->item(1, 2)->setText(
			QString::number(m_dataModel->getNumOutPrimitives()));

	if (GeoShaderDataModel::isBasicPrimitive(inPrimitiveType)) {
		twGeoInfo->hideColumn(1);
	} else {
		twGeoInfo->item(0, 1)->setText(
				lookupEnum(
						GeoShaderDataModel::getBasePrimitive(inPrimitiveType)));
		twGeoInfo->item(1, 1)->setText(
				QString::number(m_dataModel->getNumSubInPrimitives()));
	}

	twGeoInfo->resizeColumnsToContents();
	twGeoInfo->resizeRowsToContents();
	twGeoInfo->setSelectionBehavior(QAbstractItemView::SelectRows);

	// Add OpenGL view to window
	QGridLayout *gridLayout;
	gridLayout = new QGridLayout(fGLview);
	gridLayout->setSpacing(0);
	gridLayout->setMargin(0);
	m_qGLscatter = new GLScatter(this);
	gridLayout->addWidget(m_qGLscatter);

	slPointSize->setMinimum(1);
	slPointSize->setMaximum(1000);
	slPointSize->setValue(300);
	slPointSize->setTickInterval(50);

	m_scatterPositions = NULL;
	m_scatterColorsAndSizes = NULL;

	m_dataSelection = DATA_CURRENT;

	m_maxScatterDataElements = MAX(m_dataModel->getNumInPrimitives(),
			m_dataModel->getNumOutVertices());
	m_scatterDataElements = 0;
	m_scatterPositions = new float[3 * m_maxScatterDataElements];
	m_scatterColorsAndSizes = new float[3 * m_maxScatterDataElements];
	m_scatterDataX = m_scatterPositions;
	clearData(m_scatterDataX, m_maxScatterDataElements, 3, 0.0f);
	m_scatterDataCountX = 0;
	m_scatterDataY = m_scatterPositions + 1;
	clearData(m_scatterDataY, m_maxScatterDataElements, 3, 0.0f);
	m_scatterDataCountY = 0;
	m_scatterDataZ = m_scatterPositions + 2;
	clearData(m_scatterDataZ, m_maxScatterDataElements, 3, 0.0f);
	m_scatterDataCountZ = 0;
	m_scatterDataRed = m_scatterColorsAndSizes;
	clearData(m_scatterDataRed, m_maxScatterDataElements, 3, 0.0f);
	m_scatterDataCountRed = 0;
	m_scatterDataGreen = m_scatterColorsAndSizes + 1;
	clearData(m_scatterDataGreen, m_maxScatterDataElements, 3, 0.0f);
	m_scatterDataCountGreen = 0;
	m_scatterDataBlue = m_scatterColorsAndSizes + 2;
	clearData(m_scatterDataBlue, m_maxScatterDataElements, 3, 0.0f);
	m_scatterDataCountBlue = 0;
	m_qGLscatter->setData(m_scatterPositions, m_scatterColorsAndSizes, 0);
	on_slPointSize_valueChanged(300);

	setupMappingUI();

	updateGUI();
}
Beispiel #20
0
		void emitCloseView(int id){ emit closeView(id); }