InputParameters validParams<GapHeatTransfer>()
{
MooseEnum orders("FIRST SECOND THIRD FOURTH", "FIRST");
InputParameters params = validParams<IntegratedBC>();
params.addParam<std::string>("appended_property_name", "", "Name appended to material properties to make them unique");
// Common
params.addParam<Real>("min_gap", 1.0e-6, "A minimum gap size");
params.addParam<Real>("max_gap", 1.0e6, "A maximum gap size");
MooseEnum coord_types("default XYZ", "default");
params.addParam<MooseEnum>("coord_type", coord_types, "Gap calculation type (default or XYZ).");
// Quadrature based
params.addParam<bool>("quadrature", false, "Whether or not to do Quadrature point based gap heat transfer. If this is true then gap_distance and gap_temp should NOT be provided (and will be ignored) however paired_boundary IS then required.");
params.addParam<BoundaryName>("paired_boundary", "The boundary to be penetrated");
params.addParam<MooseEnum>("order", orders, "The finite element order");
params.addParam<bool>("warnings", false, "Whether to output warning messages concerning nodes not being found");
// Node based options
params.addCoupledVar("gap_distance", "Distance across the gap");
params.addCoupledVar("gap_temp", "Temperature on the other side of the gap");
return params;
}
InputParameters validParams<GapHeatTransfer>()
{
MooseEnum orders("FIRST SECOND THIRD FOURTH", "FIRST");
InputParameters params = validParams<IntegratedBC>();
params.addParam<std::string>("appended_property_name", "", "Name appended to material properties to make them unique");
// Common
params.addParam<Real>("min_gap", 1.0e-6, "A minimum gap size");
params.addParam<Real>("max_gap", 1.0e6, "A maximum gap size");
//Deprecated parameter
MooseEnum coord_types("default XYZ cyl", "default");
params.addDeprecatedParam<MooseEnum>("coord_type", coord_types, "Gap calculation type (default or XYZ).","The functionality of this parameter is replaced by 'gap_geometry_type'.");
MooseEnum gap_geom_types("PLATE CYLINDER SPHERE");
params.addParam<MooseEnum>("gap_geometry_type", gap_geom_types, "Gap calculation type. Choices are: "+gap_geom_types.getRawNames());
params.addParam<RealVectorValue>("cylinder_axis_point_1", "Start point for line defining cylindrical axis");
params.addParam<RealVectorValue>("cylinder_axis_point_2", "End point for line defining cylindrical axis");
params.addParam<RealVectorValue>("sphere_origin", "Origin for sphere geometry");
// Quadrature based
params.addParam<bool>("quadrature", false, "Whether or not to do Quadrature point based gap heat transfer. If this is true then gap_distance and gap_temp should NOT be provided (and will be ignored) however paired_boundary IS then required.");
params.addParam<BoundaryName>("paired_boundary", "The boundary to be penetrated");
params.addParam<MooseEnum>("order", orders, "The finite element order");
params.addParam<bool>("warnings", false, "Whether to output warning messages concerning nodes not being found");
// Node based options
params.addCoupledVar("gap_distance", "Distance across the gap");
params.addCoupledVar("gap_temp", "Temperature on the other side of the gap");
return params;
}
InputParameters validParams<GapConductance>()
{
MooseEnum orders("FIRST SECOND THIRD FOURTH", "FIRST");
InputParameters params = validParams<Material>();
params.addParam<std::string>("appended_property_name", "", "Name appended to material properties to make them unique");
params.addRequiredCoupledVar("variable", "Temperature variable");
// Node based
params.addCoupledVar("gap_distance", "Distance across the gap");
params.addCoupledVar("gap_temp", "Temperature on the other side of the gap");
params.addParam<Real>("gap_conductivity", 1.0, "The thermal conductivity of the gap material");
params.addParam<FunctionName>("gap_conductivity_function", "Thermal conductivity of the gap material as a function. Multiplied by gap_conductivity.");
params.addCoupledVar("gap_conductivity_function_variable", "Variable to be used in the gap_conductivity_function in place of time");
// Quadrature based
params.addParam<bool>("quadrature", false, "Whether or not to do quadrature point based gap heat transfer. If this is true then gap_distance and gap_temp should NOT be provided (and will be ignored); however, paired_boundary and variable are then required.");
params.addParam<BoundaryName>("paired_boundary", "The boundary to be penetrated");
params.addParam<MooseEnum>("order", orders, "The finite element order");
params.addParam<bool>("warnings", false, "Whether to output warning messages concerning nodes not being found");
// Common
params.addRangeCheckedParam<Real>("min_gap", 1e-6, "min_gap>=0", "A minimum gap (denominator) size");
params.addRangeCheckedParam<Real>("max_gap", 1e6, "max_gap>=0", "A maximum gap (denominator) size");
//Deprecated parameter
MooseEnum coord_types("default XYZ");
params.addDeprecatedParam<MooseEnum>("coord_type", coord_types, "Gap calculation type (default or XYZ).","The functionality of this parameter is replaced by 'gap_geometry_type'.");
MooseEnum gap_geom_types("PLATE CYLINDER SPHERE");
params.addParam<MooseEnum>("gap_geometry_type", gap_geom_types, "Gap calculation type. Choices are: "+gap_geom_types.getRawNames());
params.addParam<RealVectorValue>("cylinder_axis_point_1", "Start point for line defining cylindrical axis");
params.addParam<RealVectorValue>("cylinder_axis_point_2", "End point for line defining cylindrical axis");
params.addParam<RealVectorValue>("sphere_origin", "Origin for sphere geometry");
params.addParam<Real>("stefan_boltzmann", 5.669e-8, "The Stefan-Boltzmann constant");
params.addRangeCheckedParam<Real>("emissivity_1", 0.0, "emissivity_1>=0 & emissivity_1<=1", "The emissivity of the fuel surface");
params.addRangeCheckedParam<Real>("emissivity_2", 0.0, "emissivity_2>=0 & emissivity_2<=1", "The emissivity of the cladding surface");
params.addParam<bool>("use_displaced_mesh", true, "Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.");
return params;
}
InputParameters validParams<CreateProblemAction>()
{
MultiMooseEnum coord_types("XYZ RZ RSPHERICAL", "XYZ");
InputParameters params = validParams<MooseObjectAction>();
params.set<std::string>("type") = "FEProblem";
params.addParam<std::string>("name", "MOOSE Problem", "The name the problem");
params.addParam<std::vector<SubdomainName> >("block", "Block IDs for the coordinate systems");
params.addParam<MultiMooseEnum>("coord_type", coord_types, "Type of the coordinate system per block param");
params.addParam<bool>("fe_cache", false, "Whether or not to turn on the finite element shape function caching system. This can increase speed with an associated memory cost.");
params.addParam<bool>("kernel_coverage_check", true, "Set to false to disable kernel->subdomain kernel coverage check");
params.addParam<bool>("use_legacy_uo_aux_computation", "Set to true to have MOOSE recompute *all* AuxKernel types every time *any* UserObject type is executed.\nThis behavoir is non-intuitive and will be removed late fall 2014, The default is controlled through MooseApp");
params.addParam<bool>("use_legacy_uo_initialization", "Set to true to have MOOSE compute all UserObjects and Postprocessors during the initial setup phase of the problem recompute *all* AuxKernel types every time *any* UserObject type is executed.\nThis behavoir is non-intuitive and will be removed late fall 2014, The default is controlled through MooseApp");
return params;
}
