static void pm72_tick(void)
{
    int i, last_failure;

    if (!started) {
        started = 1;
        printk(KERN_INFO "windfarm: CPUs control loops started.\n");
        for (i = 0; i < nr_chips; ++i) {
            if (cpu_setup_pid(i) < 0) {
                failure_state = FAILURE_PERM;
                set_fail_state();
                break;
            }
        }
        DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax));

        backside_setup_pid();
        drives_setup_pid();

        /*
         * We don't have the right stuff to drive the PCI fan
         * so we fix it to a default value
         */
        wf_control_set(slots_fan, SLOTS_FAN_DEFAULT_PWM);

#ifdef HACKED_OVERTEMP
        cpu_all_tmax = 60 << 16;
#endif
    }

    /* Permanent failure, bail out */
    if (failure_state & FAILURE_PERM)
        return;

    /*
     * Clear all failure bits except low overtemp which will be eventually
     * cleared by the control loop itself
     */
    last_failure = failure_state;
    failure_state &= FAILURE_LOW_OVERTEMP;
    if (cpu_pid_combined)
        cpu_fans_tick_combined();
    else
        cpu_fans_tick_split();
    backside_fan_tick();
    drives_fan_tick();

    DBG_LOTS("  last_failure: 0x%x, failure_state: %x\n",
             last_failure, failure_state);

    /* Check for failures. Any failure causes cpufreq clamping */
    if (failure_state && last_failure == 0 && cpufreq_clamp)
        wf_control_set_max(cpufreq_clamp);
    if (failure_state == 0 && last_failure && cpufreq_clamp)
        wf_control_set_min(cpufreq_clamp);

    /* That's it for now, we might want to deal with other failures
     * differently in the future though
     */
}
Beispiel #2
0
static void rm31_tick(void)
{
	int i, last_failure;

	if (!started) {
		started = 1;
		printk(KERN_INFO "windfarm: CPUs control loops started.\n");
		for (i = 0; i < nr_chips; ++i) {
			if (cpu_setup_pid(i) < 0) {
				failure_state = FAILURE_PERM;
				set_fail_state();
				break;
			}
		}
		DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax));

		backside_setup_pid();
		slots_setup_pid();

#ifdef HACKED_OVERTEMP
		cpu_all_tmax = 60 << 16;
#endif
	}

	/* Permanent failure, bail out */
	if (failure_state & FAILURE_PERM)
		return;

	/*
	 * Clear all failure bits except low overtemp which will be eventually
	 * cleared by the control loop itself
	 */
	last_failure = failure_state;
	failure_state &= FAILURE_LOW_OVERTEMP;
	backside_fan_tick();
	slots_fan_tick();

	/* We do CPUs last because they can be clamped high by
	 * DIMM temperature
	 */
	cpu_fans_tick();

	DBG_LOTS("  last_failure: 0x%x, failure_state: %x\n",
		 last_failure, failure_state);

	/* Check for failures. Any failure causes cpufreq clamping */
	if (failure_state && last_failure == 0 && cpufreq_clamp)
		wf_control_set_max(cpufreq_clamp);
	if (failure_state == 0 && last_failure && cpufreq_clamp)
		wf_control_set_min(cpufreq_clamp);

	/* That's it for now, we might want to deal with other failures
	 * differently in the future though
	 */
}