static void
sn1_handle_irq(int irq, void *dummy, struct pt_regs *regs)
{
int bit, cnode;
struct sn1_cnode_action_list *alp;
struct sn1_intr_action *ap;
void (*handler)(int, void *, struct pt_regs *);
unsigned long flags = 0;
int cpuid = smp_processor_id();
bit = irq_to_bit_pos(irq);
LOCAL_HUB_CLR_INTR(bit);
cnode = cpuid_to_cnodeid(cpuid);
alp = sn1_node_actions[cnode];
ap = alp[irq].action_list;
if (ap == NULL) {
return;
}
while (ap) {
flags |= ap->flags;
handler = ap->handler;
(*handler)(irq,ap->intr_arg,regs);
ap = ap->next;
}
if ((flags & SA_SAMPLE_RANDOM) != 0)
add_interrupt_randomness(irq);
return;
}
static hub_intr_t
do_hub_intr_alloc(devfs_handle_t dev,
device_desc_t dev_desc,
devfs_handle_t owner_dev,
int uncond_nothread)
{
cpuid_t cpu = 0;
int vector;
hub_intr_t intr_hdl;
cnodeid_t cnode;
int cpuphys, slice;
int nasid;
iopaddr_t xtalk_addr;
struct xtalk_intr_s *xtalk_info;
xwidget_info_t xwidget_info;
ilvl_t intr_swlevel = 0;
cpu = intr_heuristic(dev, dev_desc, -1, 0, owner_dev, NULL, &vector);
if (cpu == CPU_NONE) {
printk("Unable to allocate interrupt for 0x%p\n", (void *)owner_dev);
return(0);
}
cpuphys = cpu_physical_id(cpu);
slice = cpu_physical_id_to_slice(cpuphys);
nasid = cpu_physical_id_to_nasid(cpuphys);
cnode = cpuid_to_cnodeid(cpu);
if (slice) {
xtalk_addr = SH_II_INT1 | GLOBAL_MMR_SPACE |
((unsigned long)nasid << 36) | (1UL << 47);
} else {
xtalk_addr = SH_II_INT0 | GLOBAL_MMR_SPACE |
((unsigned long)nasid << 36) | (1UL << 47);
}
intr_hdl = snia_kmem_alloc_node(sizeof(struct hub_intr_s), KM_NOSLEEP, cnode);
ASSERT_ALWAYS(intr_hdl);
xtalk_info = &intr_hdl->i_xtalk_info;
xtalk_info->xi_dev = dev;
xtalk_info->xi_vector = vector;
xtalk_info->xi_addr = xtalk_addr;
xwidget_info = xwidget_info_get(dev);
if (xwidget_info) {
xtalk_info->xi_target = xwidget_info_masterid_get(xwidget_info);
}
intr_hdl->i_swlevel = intr_swlevel;
intr_hdl->i_cpuid = cpu;
intr_hdl->i_bit = vector;
intr_hdl->i_flags |= HUB_INTR_IS_ALLOCED;
hub_device_desc_update(dev_desc, intr_swlevel, cpu);
return(intr_hdl);
}
/*
* Set up the platform-dependent fields in the processor pda.
* Must be done _after_ init_platform_nodepda().
* If we need a lock here, something else is wrong!
*/
void init_platform_pda(cpuid_t cpu)
{
#if defined(CONFIG_IA64_SGI_SN1)
hub_intmasks_t *intmasks;
int i, subnode;
cnodeid_t cnode;
synergy_da_t *sda;
int which_synergy;
cnode = cpuid_to_cnodeid(cpu);
which_synergy = cpuid_to_synergy(cpu);
sda = Synergy_da_indr[(cnode * 2) + which_synergy];
intmasks = &sda->s_intmasks;
/* Clear INT_PEND0 masks. */
for (i = 0; i < N_INTPEND0_MASKS; i++)
intmasks->intpend0_masks[i] = 0;
/* Set up pointer to the vector block in the nodepda. */
/* (Cant use SUBNODEPDA - not working yet) */
subnode = cpuid_to_subnode(cpu);
intmasks->dispatch0 = &NODEPDA(cnode)->snpda[cpuid_to_subnode(cpu)].intr_dispatch0;
intmasks->dispatch1 = &NODEPDA(cnode)->snpda[cpuid_to_subnode(cpu)].intr_dispatch1;
if (intmasks->dispatch0 != &SUBNODEPDA(cnode, subnode)->intr_dispatch0 ||
intmasks->dispatch1 != &SUBNODEPDA(cnode, subnode)->intr_dispatch1)
panic("xxx");
intmasks->dispatch0 = &SUBNODEPDA(cnode, subnode)->intr_dispatch0;
intmasks->dispatch1 = &SUBNODEPDA(cnode, subnode)->intr_dispatch1;
/* Clear INT_PEND1 masks. */
for (i = 0; i < N_INTPEND1_MASKS; i++)
intmasks->intpend1_masks[i] = 0;
#endif /* CONFIG_IA64_SGI_SN1 */
}
int
sn1_request_irq (unsigned int requested_irq, void (*handler)(int, void *, struct pt_regs *),
unsigned long irqflags, const char * devname, void *dev_id)
{
devfs_handle_t curr_dev;
devfs_handle_t dev;
pciio_intr_t intr_handle;
pciio_intr_line_t line;
device_desc_t dev_desc;
int cpuid, bit, cnode;
struct sn1_intr_action *ap, *new_ap;
struct sn1_cnode_action_list *alp;
int irq;
if ( (requested_irq & 0xff) == 0 ) {
int ret;
sgi_pci_intr_support(requested_irq,
&dev_desc, &dev, &line, &curr_dev);
intr_handle = pciio_intr_alloc(curr_dev, NULL, line, curr_dev);
bit = intr_handle->pi_irq;
cpuid = intr_handle->pi_cpu;
irq = bit_pos_to_irq(bit);
cnode = cpuid_to_cnodeid(cpuid);
new_ap = (struct sn1_intr_action *)kmalloc(
sizeof(struct sn1_intr_action), GFP_KERNEL);
irq_desc[irq].status = 0;
new_ap->handler = handler;
new_ap->intr_arg = dev_id;
new_ap->flags = irqflags;
new_ap->next = NULL;
alp = sn1_node_actions[cnode];
spin_lock(&alp[irq].action_list_lock);
ap = alp[irq].action_list;
/* check action list for "share" consistency */
while (ap){
if (!(ap->flags & irqflags & SA_SHIRQ) ) {
return(-EBUSY);
spin_unlock(&alp[irq].action_list_lock);
}
ap = ap->next;
}
ap = alp[irq].action_list;
if (ap) {
while (ap->next) {
ap = ap->next;
}
ap->next = new_ap;
} else {
alp[irq].action_list = new_ap;
}
ret = pciio_intr_connect(intr_handle, (intr_func_t)handler, dev_id, NULL);
if (ret) { /* connect failed, undo what we did. */
new_ap = alp[irq].action_list;
if (new_ap == ap) {
alp[irq].action_list = NULL;
kfree(ap);
} else {
while (new_ap->next && new_ap->next != ap) {
new_ap = new_ap->next;
}
if (new_ap->next == ap) {
new_ap->next = ap->next;
kfree(ap);
}
}
}
spin_unlock(&alp[irq].action_list_lock);
return(ret);
} else {
return(request_irq(requested_irq, handler, irqflags, devname, dev_id));
}
}
elsc_t *get_elsc(void)
{
return &NODEPDA(cpuid_to_cnodeid(smp_processor_id()))->module->elsc;
}
void
setclear_mask_a(int irq, int cpuid, int set)
{
int synergy;
int nasid;
int reg_num;
unsigned long mask;
unsigned long addr;
unsigned long reg;
unsigned long val;
int my_cnode, my_synergy;
int target_cnode, target_synergy;
/*
* Perform some idiot checks ..
*/
if ( (irq < 0) || (irq > 255) ||
(cpuid < 0) || (cpuid > 512) ) {
printk("clear_mask_a: Invalid parameter irq %d cpuid %d\n", irq, cpuid);
return;
}
target_cnode = cpuid_to_cnodeid(cpuid);
target_synergy = cpuid_to_synergy(cpuid);
my_cnode = cpuid_to_cnodeid(smp_processor_id());
my_synergy = cpuid_to_synergy(smp_processor_id());
reg_num = irq / 64;
mask = 1;
mask <<= (irq % 64);
switch (reg_num) {
case 0:
reg = VEC_MASK0A;
addr = VEC_MASK0A_ADDR;
break;
case 1:
reg = VEC_MASK1A;
addr = VEC_MASK1A_ADDR;
break;
case 2:
reg = VEC_MASK2A;
addr = VEC_MASK2A_ADDR;
break;
case 3:
reg = VEC_MASK3A;
addr = VEC_MASK3A_ADDR;
break;
default:
reg = addr = 0;
break;
}
if (my_cnode == target_cnode && my_synergy == target_synergy) {
// local synergy
val = READ_LOCAL_SYNERGY_REG(addr);
if (set) {
val |= mask;
} else {
val &= ~mask;
}
WRITE_LOCAL_SYNERGY_REG(addr, val);
val = READ_LOCAL_SYNERGY_REG(addr);
} else { /* remote synergy */
synergy = cpuid_to_synergy(cpuid);
nasid = cpuid_to_nasid(cpuid);
val = REMOTE_SYNERGY_LOAD(nasid, synergy, reg);
if (set) {
val |= mask;
} else {
val &= ~mask;
}
REMOTE_SYNERGY_STORE(nasid, synergy, reg, val);
}
}
void
synergy_perf_update(int cpu)
{
nasid_t nasid;
cnodeid_t cnode;
struct nodepda_s *npdap;
/*
* synergy_perf_initialized is set by synergy_perf_init()
* which is called last thing by sn_mp_setup(), i.e. well
* after nodepda has been initialized.
*/
if (!synergy_perf_initialized)
return;
cnode = cpuid_to_cnodeid(cpu);
npdap = NODEPDA(cnode);
if (npdap == NULL || cnode < 0 || cnode >= numnodes)
/* this should not happen: still in early io init */
return;
#if 0
/* use this to check nodepda initialization */
if (((uint64_t)npdap) & 0x7) {
printk("\nERROR on cpu %d : cnode=%d, npdap == %p, not aligned\n", cpu, cnode, npdap);
BUG();
}
#endif
if (npdap->synergy_perf_enabled == 0 || npdap->synergy_perf_data == NULL) {
/* Not enabled, or no events to monitor */
return;
}
if (npdap->synergy_inactive_intervals++ % npdap->synergy_perf_freq != 0) {
/* don't multiplex on every timer interrupt */
return;
}
/*
* Read registers for last interval and increment counters.
* Hold the per-node synergy_perf_lock so concurrent readers get
* consistent values.
*/
spin_lock_irq(&npdap->synergy_perf_lock);
nasid = cpuid_to_nasid(cpu);
npdap->synergy_active_intervals++;
npdap->synergy_perf_data->intervals++;
npdap->synergy_perf_data->total_intervals = npdap->synergy_active_intervals;
npdap->synergy_perf_data->counts[0] += 0xffffffffffUL &
REMOTE_SYNERGY_LOAD(nasid, 0, PERF_CNTR0_A);
npdap->synergy_perf_data->counts[1] += 0xffffffffffUL &
REMOTE_SYNERGY_LOAD(nasid, 1, PERF_CNTR0_B);
/* skip to next in circular list */
npdap->synergy_perf_data = npdap->synergy_perf_data->next;
spin_unlock_irq(&npdap->synergy_perf_lock);
/* set the counter 0 selection modes for both A and B */
REMOTE_SYNERGY_STORE(nasid, 0, PERF_CNTL0_A, npdap->synergy_perf_data->modesel);
REMOTE_SYNERGY_STORE(nasid, 1, PERF_CNTL0_B, npdap->synergy_perf_data->modesel);
/* and reset the counter registers to zero */
REMOTE_SYNERGY_STORE(nasid, 0, PERF_CNTR0_A, 0UL);
REMOTE_SYNERGY_STORE(nasid, 1, PERF_CNTR0_B, 0UL);
}
/*
* Allocate resources required for an interrupt as specified in dev_desc.
* Returns a hub interrupt handle on success, or 0 on failure.
*/
static hub_intr_t
do_hub_intr_alloc(devfs_handle_t dev, /* which crosstalk device */
device_desc_t dev_desc, /* device descriptor */
devfs_handle_t owner_dev, /* owner of this interrupt, if known */
int uncond_nothread) /* unconditionally non-threaded */
{
cpuid_t cpu = (cpuid_t)0; /* cpu to receive interrupt */
int cpupicked = 0;
int bit; /* interrupt vector */
/*REFERENCED*/
int intr_resflags = 0;
hub_intr_t intr_hdl;
cnodeid_t nodeid; /* node to receive interrupt */
/*REFERENCED*/
nasid_t nasid; /* nasid to receive interrupt */
struct xtalk_intr_s *xtalk_info;
iopaddr_t xtalk_addr; /* xtalk addr on hub to set intr */
xwidget_info_t xwidget_info; /* standard crosstalk widget info handle */
char *intr_name = NULL;
ilvl_t intr_swlevel = (ilvl_t)0;
extern int default_intr_pri;
extern void synergy_intr_alloc(int, int);
if (dev_desc) {
if (dev_desc->flags & D_INTR_ISERR) {
intr_resflags = II_ERRORINT;
} else if (!uncond_nothread && !(dev_desc->flags & D_INTR_NOTHREAD)) {
intr_resflags = II_THREADED;
} else {
/* Neither an error nor a thread. */
intr_resflags = 0;
}
} else {
intr_swlevel = default_intr_pri;
if (!uncond_nothread)
intr_resflags = II_THREADED;
}
/* XXX - Need to determine if the interrupt should be threaded. */
/* If the cpu has not been picked already then choose a candidate
* interrupt target and reserve the interrupt bit
*/
if (!cpupicked) {
cpu = intr_heuristic(dev,dev_desc,allocate_my_bit,
intr_resflags,owner_dev,
intr_name,&bit);
}
/* At this point we SHOULD have a valid cpu */
if (cpu == CPU_NONE) {
#if defined(SUPPORT_PRINTING_V_FORMAT)
printk(KERN_WARNING "%v hub_intr_alloc could not allocate interrupt\n",
owner_dev);
#else
printk(KERN_WARNING "%p hub_intr_alloc could not allocate interrupt\n",
(void *)owner_dev);
#endif
return(0);
}
/* If the cpu has been picked already (due to the bridge data
* corruption bug) then try to reserve an interrupt bit .
*/
if (cpupicked) {
bit = intr_reserve_level(cpu, allocate_my_bit,
intr_resflags,
owner_dev, intr_name);
if (bit < 0) {
#if defined(SUPPORT_PRINTING_V_FORMAT)
printk(KERN_WARNING "Could not reserve an interrupt bit for cpu "
" %d and dev %v\n",
cpu,owner_dev);
#else
printk(KERN_WARNING "Could not reserve an interrupt bit for cpu "
" %d and dev %p\n",
(int)cpu, (void *)owner_dev);
#endif
return(0);
}
}
nodeid = cpuid_to_cnodeid(cpu);
nasid = cpuid_to_nasid(cpu);
xtalk_addr = HUBREG_AS_XTALKADDR(nasid, PIREG(PI_INT_PEND_MOD, cpuid_to_subnode(cpu)));
/*
* Allocate an interrupt handle, and fill it in. There are two
* pieces to an interrupt handle: the piece needed by generic
* xtalk code which is used by crosstalk device drivers, and
* the piece needed by low-level IP27 hardware code.
*/
intr_hdl = snia_kmem_alloc_node(sizeof(struct hub_intr_s), KM_NOSLEEP, nodeid);
ASSERT_ALWAYS(intr_hdl);
/*
* Fill in xtalk information for generic xtalk interfaces that
* operate on xtalk_intr_hdl's.
*/
xtalk_info = &intr_hdl->i_xtalk_info;
xtalk_info->xi_dev = dev;
xtalk_info->xi_vector = bit;
xtalk_info->xi_addr = xtalk_addr;
/*
* Regardless of which CPU we ultimately interrupt, a given crosstalk
* widget always handles interrupts (and PIO and DMA) through its
* designated "master" crosstalk provider.
*/
xwidget_info = xwidget_info_get(dev);
if (xwidget_info)
xtalk_info->xi_target = xwidget_info_masterid_get(xwidget_info);
/* Fill in low level hub information for hub_* interrupt interface */
intr_hdl->i_swlevel = intr_swlevel;
intr_hdl->i_cpuid = cpu;
intr_hdl->i_bit = bit;
intr_hdl->i_flags = HUB_INTR_IS_ALLOCED;
/* Store the actual interrupt priority level & interrupt target
* cpu back in the device descriptor.
*/
hub_device_desc_update(dev_desc, intr_swlevel, cpu);
synergy_intr_alloc((int)bit, (int)cpu);
return(intr_hdl);
}
static int sn_topology_show(struct seq_file *s, void *d)
{
int sz;
int pt;
int e = 0;
int i;
int j;
const char *slabname;
int ordinal;
cpumask_t cpumask;
char slice;
struct cpuinfo_ia64 *c;
struct sn_hwperf_port_info *ptdata;
struct sn_hwperf_object_info *p;
struct sn_hwperf_object_info *obj = d; /* this object */
struct sn_hwperf_object_info *objs = s->private; /* all objects */
int rack, bay, slot, slab;
u8 shubtype;
u8 system_size;
u8 sharing_size;
u8 partid;
u8 coher;
u8 nasid_shift;
u8 region_size;
u16 nasid_mask;
int nasid_msb;
int pci_bus_ordinal = 0;
if (obj == objs) {
seq_printf(s, "# sn_topology version 2\n");
seq_printf(s, "# objtype ordinal location partition"
" [attribute value [, ...]]\n");
if (ia64_sn_get_sn_info(0,
&shubtype, &nasid_mask, &nasid_shift, &system_size,
&sharing_size, &partid, &coher, ®ion_size))
BUG();
for (nasid_msb=63; nasid_msb > 0; nasid_msb--) {
if (((u64)nasid_mask << nasid_shift) & (1ULL << nasid_msb))
break;
}
seq_printf(s, "partition %u %s local "
"shubtype %s, "
"nasid_mask 0x%016lx, "
"nasid_bits %d:%d, "
"system_size %d, "
"sharing_size %d, "
"coherency_domain %d, "
"region_size %d\n",
partid, system_utsname.nodename,
shubtype ? "shub2" : "shub1",
(u64)nasid_mask << nasid_shift, nasid_msb, nasid_shift,
system_size, sharing_size, coher, region_size);
}
if (SN_HWPERF_FOREIGN(obj)) {
/* private in another partition: not interesting */
return 0;
}
for (i = 0; i < SN_HWPERF_MAXSTRING && obj->name[i]; i++) {
if (obj->name[i] == ' ')
obj->name[i] = '_';
}
slabname = sn_hwperf_get_slabname(obj, objs, &ordinal);
seq_printf(s, "%s %d %s %s asic %s", slabname, ordinal, obj->location,
obj->sn_hwp_this_part ? "local" : "shared", obj->name);
if (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj))
seq_putc(s, '\n');
else {
seq_printf(s, ", nasid 0x%x", cnodeid_to_nasid(ordinal));
for (i=0; i < numionodes; i++) {
seq_printf(s, i ? ":%d" : ", dist %d",
node_distance(ordinal, i));
}
seq_putc(s, '\n');
/*
* CPUs on this node, if any
*/
cpumask = node_to_cpumask(ordinal);
for_each_online_cpu(i) {
if (cpu_isset(i, cpumask)) {
slice = 'a' + cpuid_to_slice(i);
c = cpu_data(i);
seq_printf(s, "cpu %d %s%c local"
" freq %luMHz, arch ia64",
i, obj->location, slice,
c->proc_freq / 1000000);
for_each_online_cpu(j) {
seq_printf(s, j ? ":%d" : ", dist %d",
node_distance(
cpuid_to_cnodeid(i),
cpuid_to_cnodeid(j)));
}
seq_putc(s, '\n');
}
}
/*
* PCI busses attached to this node, if any
*/
if (sn_hwperf_location_to_bpos(obj->location,
&rack, &bay, &slot, &slab)) {
/* export pci bus info */
print_pci_topology(s, obj, &pci_bus_ordinal,
rack, bay, slot, slab);
}
}
if (obj->ports) {
/*
* numalink ports
*/
sz = obj->ports * sizeof(struct sn_hwperf_port_info);
if ((ptdata = vmalloc(sz)) == NULL)
return -ENOMEM;
e = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
SN_HWPERF_ENUM_PORTS, obj->id, sz,
(u64) ptdata, 0, 0, NULL);
if (e != SN_HWPERF_OP_OK)
return -EINVAL;
for (ordinal=0, p=objs; p != obj; p++) {
if (!SN_HWPERF_FOREIGN(p))
ordinal += p->ports;
}
for (pt = 0; pt < obj->ports; pt++) {
for (p = objs, i = 0; i < sn_hwperf_obj_cnt; i++, p++) {
if (ptdata[pt].conn_id == p->id) {
break;
}
}
seq_printf(s, "numalink %d %s-%d",
ordinal+pt, obj->location, ptdata[pt].port);
if (i >= sn_hwperf_obj_cnt) {
/* no connection */
seq_puts(s, " local endpoint disconnected"
", protocol unknown\n");
continue;
}
if (obj->sn_hwp_this_part && p->sn_hwp_this_part)
/* both ends local to this partition */
seq_puts(s, " local");
else if (!obj->sn_hwp_this_part && !p->sn_hwp_this_part)
/* both ends of the link in foreign partiton */
seq_puts(s, " foreign");
else
/* link straddles a partition */
seq_puts(s, " shared");
/*
* Unlikely, but strictly should query the LLP config
* registers because an NL4R can be configured to run
* NL3 protocol, even when not talking to an NL3 router.
* Ditto for node-node.
*/
seq_printf(s, " endpoint %s-%d, protocol %s\n",
p->location, ptdata[pt].conn_port,
(SN_HWPERF_IS_NL3ROUTER(obj) ||
SN_HWPERF_IS_NL3ROUTER(p)) ? "LLP3" : "LLP4");
}
vfree(ptdata);
}
return 0;
}
void
hub_error_init(cnodeid_t cnode)
{
nasid_t nasid;
nasid = cnodeid_to_nasid(cnode);
hub_error_clear(nasid);
#ifdef ajm
if (cnode == 0) {
/*
* Allocate log for storing the node specific error info
*/
for (i = 0; i < numnodes; i++) {
kl_error_log[i] = kmem_zalloc_node(sizeof(sn0_error_log_t),
KM_NOSLEEP, i);
hub_err_count[i] = kmem_zalloc_node(sizeof(hub_errcnt_t),
VM_DIRECT | KM_NOSLEEP, i);
ASSERT_ALWAYS(kl_error_log[i] && hub_err_count[i]);
}
}
/*
* Assumption: There will be only one cpu who will initialize
* a hub. we need to setup the ii and each pi error interrupts.
* The SN1 hub (bedrock) has two PI, one for up to two processors.
*/
if (cpuid_to_cnodeid(smp_processor_id()) == cnode) {
int generic_intr_mask = PI_ERR_GENERIC; /* These interrupts are sent to only 1 CPU per NODE */
ASSERT_ALWAYS(kl_error_log[cnode]);
ASSERT_ALWAYS(hub_err_count[cnode]);
MD_ERR_LOG_INIT(kl_error_log[cnode]);
/* One for each CPU */
recover_error_init(RECOVER_ERROR_TABLE(cnode, 0));
recover_error_init(RECOVER_ERROR_TABLE(cnode, 1));
recover_error_init(RECOVER_ERROR_TABLE(cnode, 2));
recover_error_init(RECOVER_ERROR_TABLE(cnode, 3));
/*
* Setup error intr masks.
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
int cpuA_present = REMOTE_HUB_PI_L(nasid, sn, PI_CPU_ENABLE_A);
int cpuB_present = REMOTE_HUB_PI_L(nasid, sn, PI_CPU_ENABLE_B);
if (cpuA_present) {
if (cpuB_present) { /* A && B */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A,
(PI_FATAL_ERR_CPU_B | PI_MISC_ERR_CPU_A|generic_intr_mask));
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B,
(PI_FATAL_ERR_CPU_A | PI_MISC_ERR_CPU_B));
} else { /* A && !B */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A,
(PI_FATAL_ERR_CPU_A | PI_MISC_ERR_CPU_A|generic_intr_mask));
}
generic_intr_mask = 0;
} else {
if (cpuB_present) { /* !A && B */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B,
(PI_FATAL_ERR_CPU_B | PI_MISC_ERR_CPU_B|generic_intr_mask));
generic_intr_mask = 0;
} else { /* !A && !B */
/* nothing to set up */
}
}
}
/*
* Turn off UNCAC_UNCORR interrupt in the masks. Anyone interested
* in these errors will peek at the int pend register to see if its
* set.
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
misc = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_INT_MASK_A);
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A, (misc & ~PI_ERR_UNCAC_UNCORR_A));
misc = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_INT_MASK_B);
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B, (misc & ~PI_ERR_UNCAC_UNCORR_B));
}
/*
* enable all error indicators to turn on, in case of errors.
*
* This is not good on single cpu node boards.
**** LOCAL_HUB_S(PI_SYSAD_ERRCHK_EN, PI_SYSAD_CHECK_ALL);
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STATUS1_A_CLR, 0);
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STATUS1_B_CLR, 0);
}
/* Set up stack for each present processor */
for(sn=0; sn<NUM_SUBNODES; sn++) {
if (REMOTE_HUB_PI_L(nasid, sn, PI_CPU_PRESENT_A)) {
SN0_ERROR_LOG(cnode)->el_spool_cur_addr[0] =
SN0_ERROR_LOG(cnode)->el_spool_last_addr[0] =
REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_A);
}
if (REMOTE_HUB_PI_L(nasid, sn, PI_CPU_PRESENT_B)) {
SN0_ERROR_LOG(cnode)->el_spool_cur_addr[1] =
SN0_ERROR_LOG(cnode)->el_spool_last_addr[1] =
REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_B);
}
}
PI_SPOOL_SIZE_BYTES =
ERR_STACK_SIZE_BYTES(REMOTE_HUB_L(nasid, PI_ERR_STACK_SIZE));
#ifdef BRINGUP
/* BRINGUP: The following code looks like a check to make sure
the prom set up the error spool correctly for 2 processors. I
don't think it is needed. */
for(sn=0; sn<NUM_SUBNODES; sn++) {
if (REMOTE_HUB_PI_L(nasid, sn, PI_CPU_PRESENT_B)) {
__psunsigned_t addr_a = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_A);
__psunsigned_t addr_b = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_B);
if ((addr_a & ~0xff) == (addr_b & ~0xff)) {
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STACK_ADDR_B,
addr_b + PI_SPOOL_SIZE_BYTES);
SN0_ERROR_LOG(cnode)->el_spool_cur_addr[1] =
SN0_ERROR_LOG(cnode)->el_spool_last_addr[1] =
REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_B);
}
}
}
#endif /* BRINGUP */
/* programming our own hub. Enable error_int_pend intr.
* If both present, CPU A takes CPU b's error interrupts and any
* generic ones. CPU B takes CPU A error ints.
*/
if (cause_intr_connect (SRB_ERR_IDX,
(intr_func_t)(hubpi_eint_handler),
SR_ALL_MASK|SR_IE)) {
cmn_err(ERR_WARN,
"hub_error_init: cause_intr_connect failed on %d", cnode);
}
}
else {
/* programming remote hub. The only valid reason that this
* is called will be on headless hubs. No interrupts
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A, 0); /* not necessary */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B, 0); /* not necessary */
}
}
#endif /* ajm */
/*
* Now setup the hub ii and ni error interrupt handler.
*/
hubii_eint_init(cnode);
hubni_eint_init(cnode);
#ifdef ajm
/*** XXX FIXME XXX resolve the following***/
/* INT_PEND1 bits set up for one hub only:
* SHUTDOWN_INTR
* MD_COR_ERR_INTR
* COR_ERR_INTR_A and COR_ERR_INTR_B should be sent to the
* appropriate CPU only.
*/
if (cnode == 0) {
error_consistency_check.eps_state = 0;
error_consistency_check.eps_cpuid = -1;
spinlock_init(&error_consistency_check.eps_lock, "error_dump_lock");
}
#endif
nodepda->huberror_ticks = HUB_ERROR_PERIOD;
return;
}
