void WEBPImageDecoder::readColorProfile(const uint8_t* data, size_t size)
{
WebPChunkIterator chunkIterator;
WebPData inputData = { data, size };
WebPDemuxState state;
WebPDemuxer* demuxer = WebPDemuxPartial(&inputData, &state);
if (!WebPDemuxGetChunk(demuxer, "ICCP", 1, &chunkIterator)) {
WebPDemuxReleaseChunkIterator(&chunkIterator);
WebPDemuxDelete(demuxer);
return;
}
const char* profileData = reinterpret_cast<const char*>(chunkIterator.chunk.bytes);
size_t profileSize = chunkIterator.chunk.size;
// Only accept RGB color profiles from input class devices.
bool ignoreProfile = false;
if (profileSize < ImageDecoder::iccColorProfileHeaderLength)
ignoreProfile = true;
else if (!ImageDecoder::rgbColorProfile(profileData, profileSize))
ignoreProfile = true;
else if (!ImageDecoder::inputDeviceColorProfile(profileData, profileSize))
ignoreProfile = true;
if (!ignoreProfile)
createColorTransform(profileData, profileSize);
WebPDemuxReleaseChunkIterator(&chunkIterator);
WebPDemuxDelete(demuxer);
}
void WEBPImageDecoder::readColorProfile()
{
WebPChunkIterator chunkIterator;
if (!WebPDemuxGetChunk(m_demux, "ICCP", 1, &chunkIterator)) {
WebPDemuxReleaseChunkIterator(&chunkIterator);
return;
}
const char* profileData = reinterpret_cast<const char*>(chunkIterator.chunk.bytes);
size_t profileSize = chunkIterator.chunk.size;
// Only accept RGB color profiles from input class devices.
bool ignoreProfile = false;
if (profileSize < ImageDecoder::iccColorProfileHeaderLength)
ignoreProfile = true;
else if (!ImageDecoder::rgbColorProfile(profileData, profileSize))
ignoreProfile = true;
else if (!ImageDecoder::inputDeviceColorProfile(profileData, profileSize))
ignoreProfile = true;
if (!ignoreProfile)
m_hasColorProfile = createColorTransform(profileData, profileSize);
WebPDemuxReleaseChunkIterator(&chunkIterator);
}
bool decode(const SharedBuffer& data, bool onlySize)
{
unsigned newByteCount = data.size() - m_bufferLength;
unsigned readOffset = m_bufferLength - m_info.src->bytes_in_buffer;
m_info.src->bytes_in_buffer += newByteCount;
m_info.src->next_input_byte = (JOCTET*)(data.data()) + readOffset;
// If we still have bytes to skip, try to skip those now.
if (m_bytesToSkip)
skipBytes(m_bytesToSkip);
m_bufferLength = data.size();
// We need to do the setjmp here. Otherwise bad things will happen
if (setjmp(m_err.setjmp_buffer))
return m_decoder->setFailed();
switch (m_state) {
case JPEG_HEADER:
// Read file parameters with jpeg_read_header().
if (jpeg_read_header(&m_info, true) == JPEG_SUSPENDED)
return false; // I/O suspension.
switch (m_info.jpeg_color_space) {
case JCS_GRAYSCALE:
case JCS_RGB:
case JCS_YCbCr:
// libjpeg can convert GRAYSCALE and YCbCr image pixels to RGB.
m_info.out_color_space = rgbOutputColorSpace();
#if defined(TURBO_JPEG_RGB_SWIZZLE)
if (m_info.saw_JFIF_marker)
break;
// FIXME: Swizzle decoding does not support Adobe transform=0
// images (yet), so revert to using JSC_RGB in that case.
if (m_info.saw_Adobe_marker && !m_info.Adobe_transform)
m_info.out_color_space = JCS_RGB;
#endif
break;
case JCS_CMYK:
case JCS_YCCK:
// libjpeg can convert YCCK to CMYK, but neither to RGB, so we
// manually convert CMKY to RGB.
m_info.out_color_space = JCS_CMYK;
break;
default:
return m_decoder->setFailed();
}
m_state = JPEG_START_DECOMPRESS;
// We can fill in the size now that the header is available.
if (!m_decoder->setSize(m_info.image_width, m_info.image_height))
return false;
// Calculate and set decoded size.
m_info.scale_num = m_decoder->desiredScaleNumerator();
m_info.scale_denom = scaleDenominator;
jpeg_calc_output_dimensions(&m_info);
m_decoder->setDecodedSize(m_info.output_width, m_info.output_height);
m_decoder->setOrientation(readImageOrientation(info()));
#if USE(QCMSLIB)
// Allow color management of the decoded RGBA pixels if possible.
if (!m_decoder->ignoresGammaAndColorProfile()) {
ColorProfile colorProfile;
readColorProfile(info(), colorProfile);
createColorTransform(colorProfile, colorSpaceHasAlpha(m_info.out_color_space));
#if defined(TURBO_JPEG_RGB_SWIZZLE)
// Input RGBA data to qcms. Note: restored to BGRA on output.
if (m_transform && m_info.out_color_space == JCS_EXT_BGRA)
m_info.out_color_space = JCS_EXT_RGBA;
#endif
}
#endif
// Don't allocate a giant and superfluous memory buffer when the
// image is a sequential JPEG.
m_info.buffered_image = jpeg_has_multiple_scans(&m_info);
if (onlySize) {
// We can stop here. Reduce our buffer length and available data.
m_bufferLength -= m_info.src->bytes_in_buffer;
m_info.src->bytes_in_buffer = 0;
return true;
}
// FALL THROUGH
case JPEG_START_DECOMPRESS:
// Set parameters for decompression.
// FIXME -- Should reset dct_method and dither mode for final pass
// of progressive JPEG.
m_info.dct_method = dctMethod();
m_info.dither_mode = ditherMode();
m_info.do_fancy_upsampling = doFancyUpsampling();
m_info.enable_2pass_quant = false;
m_info.do_block_smoothing = true;
// Make a one-row-high sample array that will go away when done with
// image. Always make it big enough to hold an RGB row. Since this
// uses the IJG memory manager, it must be allocated before the call
// to jpeg_start_compress().
// FIXME: note that some output color spaces do not need the samples
// buffer. Remove this allocation for those color spaces.
m_samples = (*m_info.mem->alloc_sarray)(reinterpret_cast<j_common_ptr>(&m_info), JPOOL_IMAGE, m_info.output_width * 4, 1);
// Start decompressor.
if (!jpeg_start_decompress(&m_info))
return false; // I/O suspension.
// If this is a progressive JPEG ...
m_state = (m_info.buffered_image) ? JPEG_DECOMPRESS_PROGRESSIVE : JPEG_DECOMPRESS_SEQUENTIAL;
// FALL THROUGH
case JPEG_DECOMPRESS_SEQUENTIAL:
if (m_state == JPEG_DECOMPRESS_SEQUENTIAL) {
if (!m_decoder->outputScanlines())
return false; // I/O suspension.
// If we've completed image output...
ASSERT(m_info.output_scanline == m_info.output_height);
m_state = JPEG_DONE;
}
// FALL THROUGH
case JPEG_DECOMPRESS_PROGRESSIVE:
if (m_state == JPEG_DECOMPRESS_PROGRESSIVE) {
int status;
do {
status = jpeg_consume_input(&m_info);
} while ((status != JPEG_SUSPENDED) && (status != JPEG_REACHED_EOI));
for (;;) {
if (!m_info.output_scanline) {
int scan = m_info.input_scan_number;
// If we haven't displayed anything yet
// (output_scan_number == 0) and we have enough data for
// a complete scan, force output of the last full scan.
if (!m_info.output_scan_number && (scan > 1) && (status != JPEG_REACHED_EOI))
--scan;
if (!jpeg_start_output(&m_info, scan))
return false; // I/O suspension.
}
if (m_info.output_scanline == 0xffffff)
m_info.output_scanline = 0;
// If outputScanlines() fails, it deletes |this|. Therefore,
// copy the decoder pointer and use it to check for failure
// to avoid member access in the failure case.
JPEGImageDecoder* decoder = m_decoder;
if (!decoder->outputScanlines()) {
if (decoder->failed()) // Careful; |this| is deleted.
return false;
if (!m_info.output_scanline)
// Didn't manage to read any lines - flag so we
// don't call jpeg_start_output() multiple times for
// the same scan.
m_info.output_scanline = 0xffffff;
return false; // I/O suspension.
}
if (m_info.output_scanline == m_info.output_height) {
if (!jpeg_finish_output(&m_info))
return false; // I/O suspension.
if (jpeg_input_complete(&m_info) && (m_info.input_scan_number == m_info.output_scan_number))
break;
m_info.output_scanline = 0;
}
}
m_state = JPEG_DONE;
}
// FALL THROUGH
case JPEG_DONE:
// Finish decompression.
return jpeg_finish_decompress(&m_info);
case JPEG_ERROR:
// We can get here if the constructor failed.
return m_decoder->setFailed();
}
return true;
}