void ft_util_set_lcd_light_level(FT_UTILITY_COMMAND_REQ *req, FT_UTILITY_COMMAND_CNF *cnf)
{
kal_uint8 level=0;
kal_uint8 led_type;
#if(!defined(__L1_STANDALONE__))
level=req->cmd.LCDLevel.lcd_light_level;
led_type = req->cmd.LCDLevel.lcd_type;
if(level>5) level = 5;
if(led_type==0)
{
if(custom_cfg_gpio_set_level(GPIO_DEV_LED_MAINLCD,level))
cnf->status = FT_CNF_OK;
else
cnf->status = FT_CNF_FAIL;
}
else if(led_type==1)
{
if(custom_cfg_gpio_set_level(GPIO_DEV_LED_SUBLCD,level))
cnf->status = FT_CNF_OK;
else
cnf->status = FT_CNF_FAIL;
}
#endif
}
void custom_stop_flashlight(void)
{
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_1, LED_LIGHT_LEVEL0);
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_2, LED_LIGHT_LEVEL0);
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_3, LED_LIGHT_LEVEL0);
PWM2_Stop();
}
void custom_start_flashlight(kal_uint8 red_level, kal_uint8 green_level, kal_uint8 blue_level, kal_uint8 duty)
{
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_1, ((red_level>0) ? LED_LIGHT_LEVEL5 : LED_LIGHT_LEVEL0));
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_2, ((green_level>0) ? LED_LIGHT_LEVEL5 : LED_LIGHT_LEVEL0));
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_3, ((blue_level>0) ? LED_LIGHT_LEVEL5 : LED_LIGHT_LEVEL0));
PWM2_Configure(PWM2_Level_Info[0][0], duty);
PWM2_Start();
}
void custom_stop_flashlight(void)
{
DCL_HANDLE pwm_handle;
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_1, LED_LIGHT_LEVEL0);
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_2, LED_LIGHT_LEVEL0);
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_3, LED_LIGHT_LEVEL0);
pwm_handle = DclPWM_Open(DCL_PWM2, MOD_UEM);
DclPWM_Control(pwm_handle, PWM_CMD_STOP, 0);
DclPWM_Close(pwm_handle);
}
void custom_start_flashlight(kal_uint8 red_level, kal_uint8 green_level, kal_uint8 blue_level, kal_uint8 duty)
{
DCL_HANDLE pwm_handle;
PWM_CMD_CONFIG_OLD_T old_config;
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_1, ((red_level>0) ? LED_LIGHT_LEVEL5 : LED_LIGHT_LEVEL0));
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_2, ((green_level>0) ? LED_LIGHT_LEVEL5 : LED_LIGHT_LEVEL0));
custom_cfg_gpio_set_level(GPIO_DEV_LED_STATUS_3, ((blue_level>0) ? LED_LIGHT_LEVEL5 : LED_LIGHT_LEVEL0));
pwm_handle = DclPWM_Open(DCL_PWM2,MOD_UEM);
old_config.freq = PWM2_Level_Info[0][0];
old_config.duty = duty;
DclPWM_Control(pwm_handle, PWM_CMD_CONFIG_OLD, (DCL_CTRL_DATA_T*)&old_config);
DclPWM_Control(pwm_handle, PWM_CMD_START,0);
DclPWM_Close(pwm_handle);
}
void ft_util_set_vibrator_onoff(FT_UTILITY_COMMAND_REQ *req, FT_UTILITY_COMMAND_CNF *cnf)
{
kal_uint8 onoff=0;
onoff=req->cmd.VibrOnOff.onoff;
#if(!defined(__L1_STANDALONE__))
if(custom_cfg_gpio_set_level(GPIO_DEV_VIBRATOR,onoff))
cnf->status = FT_CNF_OK;
else
cnf->status = FT_CNF_FAIL;
#endif
}
void ft_util_set_led_light_level(FT_UTILITY_COMMAND_REQ *req, FT_UTILITY_COMMAND_CNF *cnf)
{
kal_uint8 level=0;
level=req->cmd.LEDLevel.led_light_level;
#if(!defined(__L1_STANDALONE__))
if(custom_cfg_gpio_set_level(GPIO_DEV_LED_KEY,level))
cnf->status = FT_CNF_OK;
else
cnf->status = FT_CNF_FAIL;
#endif
}
static void FT_Initialization(task_entry_struct *task_entry_ptr)
{
// active module ID in task_active_module_g
kal_set_active_module_id(MOD_FT);
FtInitMemoryPool();
// custom init
FT_CustomInit();
#if !defined(__L1_STANDALONE__)
// enable main LCD backlight
custom_cfg_gpio_set_level(GPIO_DEV_LED_MAINLCD, LED_LIGHT_LEVEL5);
#endif // #if !defined(__L1_STANDALONE__)
#ifdef L1_CATCHER
// L1 logging initialization
Trc_Init();
#endif // #ifdef L1_CATCHER
L1TST_Init();
FT_InitCalibrationData(task_entry_ptr);
FT_InitFtData();
#if ( defined(__HSDPA_SUPPORT__) || defined(__HSUPA_SUPPORT__) ) && defined(__MODEM_CARD__)
/// clear USB download RTC bit for HSPA data card project
INT_SetCmdToSys(SYS_CMD_CLR_DL_FLAG);
#endif // #if ( defined(__HSDPA_SUPPORT__) || defined(__HSUPA_SUPPORT__) ) && defined(__MODEM_CARD__)
}
